SEARCH · Engineering Papers

Results for “Data exploration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

All sources NASA NTRS DOE OSTI

NASA NTRS2016

Imager-to-Radiometer In-flight Cross Calibration: RSP Radiometric Comparison with Airborne and Satellite Sensors

This work develops a method to compare the radiometric calibration between a radiometer and imagers hosted on aircraft and satellites. The radiometer is the airborne Research Scanning Polarimeter (RSP), which takes multi-angle, photo-polarimetric measurements in several spectral channels. The RSP measurements used in this work were coincident with measurements made by the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS), which was on the same aircraft. These airborne measurements were also coincident with an overpass of the Landsat 8 Operational Land Imager (OLI). First we compare the RSP and OLI radiance measurements to AVIRIS since the spectral response of the multispectral instruments can be used to synthesize a spectrally equivalent signal from the imaging spectrometer data. We then explore a method that uses AVIRIS as a transfer between RSP and OLI to show that radiometric traceability of a satellite-based imager can be used to calibrate a radiometer despite differences in spectral channel sensitivities. This calibration transfer shows agreement within the uncertainty of both the various instruments for most spectral channels.

calibrating↗

NASA NTRS2016

The Substructure of a Flux Transfer Event Observed by the MMS Spacecraft

On 15 August 2015, MMS (Magnetospheric Multiscale mission), skimming the dusk magnetopause, detected an isolated region of an increased magnetic strength and bipolar Bn, indicating a flux transfer event (FTE). The four spacecraft in a tetrahedron allowed for investigations of the shape and motion of the FTE. In particular, high-resolution particle data facilitated our exploration of FTE substructures and their magnetic connectivity inside and surrounding the FTE. Combined field and plasma observations suggest that the core fields are open, magnetically connected to the northern magnetosphere from which high-energy particles leak; ion "D" distributions characterize the axis of flux ropes that carry old-opened field lines; counter streaming electrons superposed by parallel-heated components populate the periphery surrounding the FTE; and the interface between the core and draped regions contains a separatrix of newlyopened magnetic field lines that emanate from the X line above the FTE.

Hwang, K.-J.↗

NASA NTRS2017

NASA's In-Space Manufacturing Project: A Roadmap for a Multimaterial Fabrication Laboratory in Space

Human space exploration to date has been limited to low Earth orbit and the moon. The International Space Station (ISS) provides a unique opportunity for NASA to partner with private industry for development and demonstration of the technologies needed to support exploration initiatives. One challenge that is critical to sustainable and safer exploration is the ability to manufacture and recycle materials in space. This paper provides an overview of NASA's in-space manufacturing (ISM) project, its past and current activities (2014-2017), and how technologies under development will ultimately culminate in a multimaterial fabrication laboratory ("ISM FabLab") to be deployed on the International Space Station in the early 2020s. ISM is a critical capability for the long endurance missions NASA seeks to undertake in the coming decades. An unanticipated failure that can be adapted for in low earth orbit, through a resupply launch or a return to earth, may instead result in a loss of mission while in transit to Mars. To have a suite of functional ISM capabilities that are compatible with NASA's exploration timeline, ISM must be equipped with the resources necessary to develop these technologies and deploy them for testing prior to the scheduled de-orbit of ISS in 2024. The presentation provides a broad overview of ISM projects activities culminating with the Fabrication Laboratory for ISS. In 2017, the in-space manufacturing project issued a broad agency announcement for this capability. Requirements of the Fabrication Laboratory as stated in the solicitation will be discussed. The FabLab will move NASA and private industry significantly closer to changing historical paradigms for human spaceflight where all materials used in space are launched from earth. While the current ISM FabLab will be tested on ISS, future systems are eventually intended for use in a deep space habitat or transit vehicle. The work of commercial companies funded under NASA's Small Business Innovative Research Program (SBIR) is also discussed, as these activities, from development of recyclable packaging for ISS to additive manufacturing capabilities for metals and electronics, could also potentially be infused into future exploration capabilities. Key data from ISM projects to date will also be summarized.

Prater, Tracie↗

NASA NTRS2018

Chapter 6: Sulfur on Mars from the Atmosphere to the Core

Observations of the martian surface from orbiting spacecraft and in situ landers and rovers, as well as analyses of martian meteorites in terrestrial laboratories, have consistently indicated that Mars is a sulfur-rich planet. The global inventory of sulfur, from the atmosphere to the core, carries widespread implications of potential geophysical, geochemical, climatological, and astrobiological significance. For example, the sulfur content of the core carries implications for core density; the speciation of igneous sulfur minerals reflects the oxidation state of the magma from which they formed; sulfur-bearing gases may have exerted control on the temperatures at the surface of early Mars; and the widespread availability of sulfur on Mars would have provided an abundant source for energy and nutrients to fuel sulfur-metabolizing microbes, such as those that arose during the emergence of primitive life on Earth. Here we provide an overview of martian sulfur and its relevance to these areas of interest, including a discussion of analytical techniques and results acquired by space missions and meteorite analyses to date. We review current studies modeling the potential effects of sulfur-bearing gases on the past martian climate and possible constraints on atmospheric composition implied by sulfur isotopic data. We also explore the importance of sulfur to the search for extinct or extant life on Mars. Finally, we summarize a few areas of interest to future work, including advances in space exploration technology and preparation for Mars sample return.

Climate↗

NASA NTRS2016

Coupled Retrieval of Aerosol Properties and Surface Reflection Using the Airborne Multi-Angle SpectroPolarimetric Imager (AirMSPI)

The Airborne Multi-angle SpectroPolarimetric Imager (AirMSPI) has been flying aboard the NASA ER-2 high altitude aircraft since October 2010. In step-and-stare operation mode, AirMSPI acquires radiance and polarization data at 355, 380, 445, 470*, 555, 660*, 865*, and 935 nm (* denotes polarimetric bands). The imaged area covers about 10 km by 10 km and is observed from 9 view angles between ±67° off of nadir. We have developed an efficient and flexible code that uses the information content of AirMSPI data for a coupled retrieval of aerosol properties and surface reflection. The retrieval was built based on the multi-pixel optimization concept, with the use of a hybrid radiative transfer model that combines the Markov Chain and adding/doubling methods. The convergence and robustness of our algorithm is ensured by applying constraints on (a) the spectral variation of the Bidirectional Polarization Distribution Function (BPDF) and angular shape of the Bidirectional Reflectance Distribution Function (BRDF); (b) the spectral variation of aerosol optical properties; and (c) the spatial variation of aerosol parameters across neighboring image pixels. Our retrieval approach has been tested using over 20 AirMSPI datasets having low to moderately high aerosol loadings (~0.02<AOD550-nm<~0.45) and acquired during several field campaigns. Results are compared with AERONET aerosol reference data. We also explore the benefits of AirMSPI’s ultraviolet and polarimetric bands as well as the use of multiple view angles.

Xu, Feng↗

NASA NTRSDate not supplied

Developing a Daily Metabolic Rate Profile for Human Exploration Missions

Loads imposed on the Environmental Control and Life Support System (ECLSS) of human spacecraft can be greatly affected by the activity level of the crew. Water vapor, sensible heat and carbon dioxide outputs are all affected by instantaneous and average metabolic rates. This is especially true when rigorous exercise is required during extended missions to maintain astronaut health and performance. Thus an appropriate metabolic rate profile based on mission duration as well as other factors is an important design driver for the ECLSS. These factors are discussed and updated based on NASA’s latest exploration plans and data from ground testing involving human subjects. Some of the most significant updates from past metabolic rate profiles used by NASA are increased moisture from sweat, increased carbon dioxide due to longer exercise duration, and consideration of a wider range of crew body size and increased fitness levels.

human thermal model↗

NASA NTRSDate not supplied

Synthetic Data Generation for 3D Mesh Prediction and Spatial Reasoning During Multi-Agent Robotic Missions

In-space assembly operations require accurate reasoning over the pose, location, and structural organization of both the autonomous agents and assembly materials. In a full six-degree-of-freedom space, an accurate understanding of the full three-dimensional structure of the object of interest greatly enriches information for pose estimation and collision planning. Current methods of predicting pose estimation require a priori understanding of the shape of the object. Additionally, visual information in the space environment is impacted by variations in contrast and illumination. Using synthetic data allows us to rapidly generate large datasets with in varying environments and lighting conditions. This work details the generation of synthetic data used to explore the use of a region-based convolutional neural networks to detect objects of interest and predict a voxel-based three-dimensional mesh in order to understand their full three-dimensional shape. This mesh provides useful spatial information during in-space assembly operations without requiring either the complexity of maintaining models over the progress of building an object or observations from multiple angles. The generated meshes are then compared to that of ground truth in order to measure its performance.

James Ecker↗

NASA NTRSDate not supplied

Digital Lunar Exploration Sites (DLES)

It has been almost 50 years since humans last set foot on the Moon. With NASA’s Artemis program, the United States and its international and commercial partners are embarking on a new endeavor to explore the lunar surface. Before we return, we will have simulated every aspect of these future missions. Many of these models and simulations (M&S) will rely on well-known and commonly-used technologies, some of which trace their origins back to the Apollo program. However, M&S has advanced significantly, as have the underlying computational capabilities. As a result, we are able to model many more aspects of the Artemis vehicles and support systems with significantly improved detail and confidence. Accurately and efficiently modeling the lunar environment will be critical to simulating the Artemis elements and mission activities. This includes characterizing and modeling lunar topography, smaller craters, exposed surface rocks, lunar regolith, surface lighting, and ambient thermal environment. These are all necessary for understanding fundamental behaviors and performance of vehicles and support systems in the lunar environment and are often determining factors in the selection of exploration sites and defining mission profiles. The Astromaterials Research and Exploration Sciences (ARES) team in the Exploration Integration and Science Directorate at NASA’s Johnson Space Center (JSC) and the NASA Exploration Systems Simulations (NExSyS) team in the Simulation and Graphics Branch at JSC are developing and maintaining the Digital Lunar Exploration Sites (DLES) data, documentation, and software packages. This data is being fed directly into a diverse collection of graphics and simulation environments, where it is used to construct the closest known truth for numerous potential Lunar South Pole landing sites. DLES is available to projects across NASA and particularly the Artemis program to support coordinated digital representations of the lunar environment. This paper describes the fundamental need for DLES, the science data sets that are going into DLES, some of the processes used to integrate this data into DLES products, the basic products that constitute DLES, and some examples of DLES in use.

Lunar↗

NASA NTRS2021

The Arya Crop Yield Forecasting Algorithm: Application to the Main Wheat Exporting Countries

Wheat is the most important commodity traded in the international food market. Thus, accurate and timely information on wheat production can help mitigate food price fluctuations. Within the existing operational regional and global scale agricultural monitoring systems that provide information on global crop yield and area forecasts, there are still fundamental gaps: #1. Lack of quantitative Earth Observation (EO) derived crop information, #2. Lack of global but detailed (national or subnational level) and timely crop production forecasts and #3. Lack of information on forecast uncertainties. In this study we present the Agriculture Remotely-sensed Yield Algorithm (ARYA) an EO-based method, advancing the state of EO data application and usage (addressing gap #1) to forecast wheat yield. The algorithm is based on the evolution of the Difference Vegetation Index (DVI) using MODIS data at 1km resolution and the Growing Degree Days (GDD) from reanalysis data. Additionally, we explore how Land Surface Temperature (LST) can be included into the model and whether this parameter adds any value to the model performance when combined with the optical information. ARYA is implemented at the national and subnational level to forecast winter wheat yield in the main wheat exporting countries of US, Russia, Ukraine, France, Germany, Australia and Argentina from 2001 to 2019 (covering over 70% of wheat exports globally) in a timely manner by providing daily forecasts (addressing gap #2). The results show that ARYA provides yield estimations with RMSE’s within 0.3 ± 0.1 t/ha at national level and 0.6 ± 0,1 t/ha at subnational level after Day Of the Year (DOY) 140 (mid May) in the Northern Hemisphere and DOY 280 (beginning of October) in the Southern Hemisphere. This means that ARYA can provide crop yield estimates of wheat yield with 5-15 % error at national and 7-20 % error at subnational level starting from 2 to 2.5 months prior to harvest.

Agriculture↗

NASA NTRS2022

Changes in Land Use Enhance the Sensitivity of Tropical Ecosystems to Fire-Climate Extremes

The Pantanal, the largest contiguous wetland in the world with a high diversity of ecosystems and habitat for several endangered species, was impacted by record-breaking wildfires in 2020. In this study, we integrate satellite and modeling data that enable exploration of natural and human contributing factors to the unprecedented 2020 fires. We demonstrate that the fires were fueled by an exceptional multi-year drought, but dry conditions solely could not explain the spatial patterns of burning. Our analysis reveals how human-caused fires exacerbated drought effects on natural ecosystem within the Pantanal, with large burned fractions primarily over natural (52%), and low cattle density areas (44%) in 2020. The post-fire ecosystem and hydrology changes also had strong ecological effects, with vegetation productivity less than − 1.5 σ over more than 30% of the natural and conservation areas. In contrast to more managed areas, there was a clear decrease in evaporation (by ~ 9%) and an increase in runoff (by ~ 5%) over the natural areas, with long-term impacts on ecosystem recovery and fire risk. This study provides the first tropical evidence outside rainforests of the synergy between climate, land management and fires, and the associated impacts on the ecosystem and hydrology over the largest contiguous wetlands in the world.

Sujay Kumar↗

NASA NTRSDate not supplied

Using Secondary Craters to Assess Strength Differences Between Neighboring Surface Units

An issue with Martian remote sensing studies is the difficulty inferring surface and crustal material properties. For direct information we rely on the instruments of landed missions, like InSight, and extrapolate to other locations. To apply that extrapolation, we would like to use a methodology that can benefit from remote sensing data. We are exploring using secondary craters, which are often thought of as nuisances when determining accurate ages, to calculate crustal properties. The upside of secondary craters is that they are from ejecta blocks moving at relatively lower speeds, this lets them reside in a different crater scaling regime [1], one that is more sensitive to the crust’s effective strength (Yeff) and porosity/internal friction (through the μ and KD terms [A]).

Mars↗

NASA NTRSDate not supplied

Open Source Application of Fusing Aerosol Products from GEO and LEO Satellites

Retrieving aerosol optical depths (AODs) from sun-synchronous polar orbiting (aka low earth orbit, LEO) satellites, such as MODISs, and VIIRSs, OMI, TROPOMI, etc, has become well-established as a tool for extracting information on particulate matter (PM) and related processes in the atmosphere. However, with recently launched geostationary satellites (GEO), such as GOES-16/17/18, and Himawari-8/9, and Meteosat Third Generation (MTG) they provide a much higher temporal resolution (order of 10 minutes), typically an image once or more per hour during daylight compared to LEO once per day. By combining these observations, we may be able to characterize the diurnal cycle of global AOD at the local, regional and global scale. While the science community is still exploring the new data from GEO observations, we have been thinking about how to properly combine/merge/fuse those data considering differences in their spatial and temporal resolutions. However, this poses a “Big Data” challenge. The big data challenge is not just about data storage, but also about data discoverability, and accessibility, and even more, about data migration/mirroring in the cloud-computing environment. This paper is merely showing some of the efforts and approaches we have attempted in fusing six satellites’ Level 2 aerosol data (three are from GEO (GOES-16/17 and Himawari-8), and the other three are from LEO (TERRA/MODIS, AQUA/MODIS, SNPP-VIIRS) from Dark Target (DT) aerosol retrieval algorithm. Having the on-demand capability of fusing remote sensing products onto the desired temporal and spatial domain enables researchers and application practitioners to better manipulate and work with satellite and sensor data. It is our hopeWe hope that by making such an open-source package, and the accompanying functionality, the scientific community will be granted easier access to aerosol data processing resources. The MEaSUREs Program (Making Earth System Data Records for Use in Research Environments) expands our understanding of the Earth's current system through atmospheric and surface measurements. In an effort to aid the scientific research component and improve open source methods, this project developed Python code for fusing six satellite Level 2 aerosol data (three are from geostationary satellites (GEO), and the other three are from low earth orbital satellites (LEO)) from Dark Target Aerosol Retrieval Algorithm.

Jennifer Wei↗

NASA NTRSDate not supplied

Evaluating a Cognitive Extension for the Licklider Transmission Protocol in a Spacecraft Emulation Testbed

In space communications, particularly when involving regions beyond cislunar space, the development of advanced networking solutions is essential to address the challenges posed by limited connectivity, substantial propagation delays, and radio signal variations. This study explores a data-driven approach to the Licklider Transmission Protocol (LTP), specifically focusing on dynamically adjusting the maximum payload size of segments. Prior research has emphasized the potential benefits of dynamically adjusting this parameter, introducing the concept of Cognitive LTP. This paper presents a software implementation of Cognitive LTP (CLTP) within an open-source Delay Tolerant Networking (DTN) framework, specifically the High-rate Delay Tolerant Networking (HDTN), and experimentally evaluates its performance under realistic space conditions. Leveraging the Cognitive Ground Testbed (CGT), developed by NASA GRC for spacecraft communication emulation, this study effectively bridges the gap between theoretical advancements and practical applications. By thoroughly analyzing CLTP’s functionality within the CGT, this research offers insights into the practical implications of adaptive networking strategies, emphasizing the importance of conducting tests in relevant environments for the maturation of space communication technologies.

Delay Tolerant Networking↗

NASA NTRS1992

Modular antenna pointing system for the Explorer platform satellite

A Modular Antenna Pointing System (MAPS) is described which was designed for on-orbit servicing and on-orbit exchange. The MAPS provides a data link between the Explorer Platform (EP) satellite and the Tracking and Data Relay Satellite (TDRS). The MAPS consists of a two axis gimbal set used fo position a High Gain Antenna (HGA) toward TDRS, system control electronics, and an extendable mast. The system was qualified and integrated with the EP satellite for an April 1992 launch.

Andrus, James↗

NASA NTRS2016

GeneLab Phase 2: Integrated Search Data Federation of Space Biology Experimental Data

The GeneLab project is a science initiative to maximize the scientific return of omics data collected from spaceflight and from ground simulations of microgravity and radiation experiments, supported by a data system for a public bioinformatics repository and collaborative analysis tools for these data. The mission of GeneLab is to maximize the utilization of the valuable biological research resources aboard the ISS by collecting genomic, transcriptomic, proteomic and metabolomic (so-called omics) data to enable the exploration of the molecular network responses of terrestrial biology to space environments using a systems biology approach. All GeneLab data are made available to a worldwide network of researchers through its open-access data system. GeneLab is currently being developed by NASA to support Open Science biomedical research in order to enable the human exploration of space and improve life on earth. Open access to Phase 1 of the GeneLab Data Systems (GLDS) was implemented in April 2015. Download volumes have grown steadily, mirroring the growth in curated space biology research data sets (61 as of June 2016), now exceeding 10 TB/month, with over 10,000 file downloads since the start of Phase 1. For the period April 2015 to May 2016, most frequently downloaded were data from studies of Mus musculus (39) followed closely by Arabidopsis thaliana (30), with the remaining downloads roughly equally split across 12 other organisms (each 10 of total downloads). GLDS Phase 2 is focusing on interoperability, supporting data federation, including integrated search capabilities, of GLDS-housed data sets with external data sources, such as gene expression data from NIHNCBIs Gene Expression Omnibus (GEO), proteomic data from EBIs PRIDE system, and metagenomic data from Argonne National Laboratory's MG-RAST. GEO and MG-RAST employ specifications for investigation metadata that are different from those used by the GLDS and PRIDE (e.g., ISA-Tab). The GLDS Phase 2 system will implement a Google-like, full-text search engine using a Service-Oriented Architecture by utilizing publicly available RESTful web services Application Programming Interfaces (e.g., GEO Entrez Programming Utilities) and a Common Metadata Model (CMM) in order to accommodate the different metadata formats between the heterogeneous bioinformatics databases. GLDS Phase 2 completion with fully implemented capabilities will be made available to the general public in September 2017.

Space Biology↗

NASA NTRS2005

Impact of CAMEX-4 Data Sets for Hurricane Forecasts using a Global Model

This study explores the impact on hurricane data assimilation and forecasts from the use of dropsondes and remote-sensed moisture profiles from the airborne Lidar Atmospheric Sensing Experiment (LASE) system. We show that the use of these additional data sets, above those from the conventional world weather watch, has a positive impact on hurricane predictions. The forecast tracks and intensity from the experiments show a marked improvement compared to the control experiment where such data sets were excluded. A study of the moisture budget in these hurricanes showed enhanced evaporation and precipitation over the storm area. This resulted in these data sets making a large impact on the estimate of mass convergence and moisture fluxes, which were much smaller in the control runs. Overall this study points to the importance of high vertical resolution humidity data sets for improved model results. We note that the forecast impact from the moisture profiling data sets for some of the storms is even larger than the impact from the use of dropwindsonde based winds.

Kamineni, Rupa↗

NASA NTRS2005

New Directions in Space Operations Services in Support of Interplanetary Exploration

To gain access to the necessary operational processes and data in support of NASA's Lunar/Mars Exploration Initiative, new services, adequate levels of computing cycles and access to myriad forms of data must be provided to onboard spacecraft and ground based personnel/systems (earth, lunar and Martian) to enable interplanetary exploration by humans. These systems, cycles and access to vast amounts of development, test and operational data will be required to provide a new level of services not currently available to existing spacecraft, on board crews and other operational personnel. Although current voice, video and data systems in support of current space based operations has been adequate, new highly reliable and autonomous processes and services will be necessary for future space exploration activities. These services will range from the more mundane voice in LEO to voice in interplanetary travel which because of the high latencies will require new voice processes and standards. New services, like component failure predictions based on data mining of significant quantities of data, located at disparate locations, will be required. 3D or holographic representation of onboard components, systems or family members will greatly improve maintenance, operations and service restoration not to mention crew morale. Current operational systems and standards, like the Internet Protocol, will not able to provide the level of service required end to end from an end point on the Martian surface like a scientific instrument to a researcher at a university. Ground operations whether earth, lunar or Martian and in flight operations to the moon and especially to Mars will require significant autonomy that will require access to highly reliable processing capabilities, data storage based on network storage technologies. Significant processing cycles will be needed onboard but could be borrowed from other locations either ground based or onboard other spacecraft. Reliability will be a key factor with onboard and distributed backup processing an absolutely necessary requirement. Current cluster processing/Grid technologies may provide the basis for providing these services. An overview of existing services, future services that will be required and the technologies and standards required to be developed will be presented. The purpose of this paper will be to initiate a technological roadmap, albeit at a high level, of current voice, video, data and network technologies and standards (which show promise for adaptation or evolution) to what technologies and standards need to be redefined, adjusted or areas where new ones require development. The roadmap should begin the differentiation between non manned and manned processes/services where applicable. The paper will be based in part on the activities of the CCSDS Monitor and Control working group which is beginning the process of standardization of the these processes. Another element of the paper will be based on an analysis of current technologies supporting space flight processes and services at JSC, MSFC, GSFC and to a lesser extent at KSC. Work being accomplished in areas such as Grid computing, data mining and network storage at ARC, IBM and the University of Alabama at Huntsville will be researched and analyzed.

Bradford, Robert N.↗

NASA NTRS2011

The Search for Biosignatures on Mars: Using Predictive Geology to Optimize Exploration Targets

Predicting geologic context from satellite data is a method used on Earth for exploration in areas with limited ground truth. The method can be used to predict facies likely to contain organic-rich shales. Such shales concentrate and preserve organics and are major repositories of organic biosignatures on Earth [1]. Since current surface conditions on Mars are unfavorable for development of abundant life or for preservation of organic remains of past life, the chances are low of encountering organics in surface samples. Thus, focusing martian exploration on sites predicted to contain organic-rich shales would optimize the chances of discovering evidence of life, if it ever existed on that planet.

Oehler, Dorothy Z.↗