Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DISCHARGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44

Theory of a High-Voltage Pulse Discharge in a High-Pressure Gas: Hydrodynamic and Kinetic Approaches

Comparative results of modeling of the phenomenon of a high-voltage discharge in nitrogen at atmospheric pressure based on two theoretical approaches: hydrodynamic and kinetic descriptions of electrons in discharge plasma are presented. The detailed spatiotemporal pattern of the development of coaxial gas-filled diode breakdown with formation of runaway electrons in it is described. It is demonstrated that the switching characteristics of the subnanosecond discharge are reliably modeled within the limits of both hydrodynamic and kinetic descriptions of electron components, whereas the parameters of runaway electrons can reliably be calculated only using the kinetic description.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A Simple Analytical Model for Predicting the Detectable Ion Current in Ion Mobility Spectrometry Using Corona Discharge Ionization Sources

Corona discharge ionization sources are often used in ion mobility spectrometers (IMS) when a non-radioactive ion source with high ion currents is required. Typically, the corona discharge is followed by a reaction region where analyte ions are formed from the reactant ions. In this work, we present a simple yet sufficiently accurate model for predicting the ion current available at the end of this reaction region when operating at reduced pressure as in High Kinetic Energy Ion Mobility Spectrometers (HiKE-IMS) or most IMS-MS instruments. It yields excellent qualitative agreement with measurement results and is even able to calculate the ion current within an error of 15%. Additional interesting findings of this model are the ion current at the end of the reaction region being independent from the ion current generated by the corona discharge and the ion current in High Kinetic Energy Ion Mobility Spectrometers (HiKE-IMS) growing quadratically when scaling down the length of the reaction region. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Plasma assisted NH 3 /H 2 /air ignition in nanosecond discharges with non-equilibrium energy transfer

Ammonia (NH 3 ), with its high energy density and easiness to store and transport as a hydrogen carrier, has become a promising alternative green fuel. However, its adoption in power generation is hindered by challenges such as low burning velocity, slow low-temperature oxidation, high NO x emissions, and ignition difficulty. Here, this work computationally investigates the effects of non-equilibrium energy transfer by nanosecond discharges on NH 3 ignition and flame propagation in an NH 3 /H 2 /air flow at 700 K and 1 atm. The simulation results demonstrate that NH 3 /air mixtures require a large ignition energy due to their large critical ignition radius. It is shown that adding 30 % hydrogen significantly reduces the critical ignition radius and minimum ignition energy. Two-dimensional modeling further shows a non-monotonic dependence of ignition kernel volume on the applied voltage and reduced electric field. The optimum ignition enhancement occurs at 200 Td where the generation of electronically excited species and radicals including N 2 (B), O( 1 D) and OH becomes most efficient. Higher voltages divert electron energy toward ionization, which makes it less effective for NH 3 ignition. The study also identifies an optimal electrode gap size for a given pulse energy. Smaller gap sizes increase deposited energy density, raising temperature and radical concentrations. However, excessive reduction of the gap distance reduces flame propagation speed due to the flame stretch effect in rich mixtures with the effective Lewis number greater than unity. A nonlinear relationship between pulse repetition frequency and ignition kernel volume is observed in a nanosecond pulsed high frequency discharge (NPHFD). An optimal frequency range of 200 kHz to 2 MHz is found when two pulses are used. In addition, an optimal number of pulses exists for each pulse repetition frequency, with higher frequencies requiring more pulses to maximize the overlap region. These findings provide critical insights on developing controlled plasma discharge techniques for efficient NH 3 ignition in reactive flows within internal combustion engines and gas turbines.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Thermal analysis of high-pressure hydrogen during the discharging process

The transient temperature and pressure of hydrogen are measured during the hydrogen discharging process through an orifice in a high-pressure vessel. The initial pressures of hydrogen in the vessel are set to approximately 30, 60, and 100 MPa. The mass flow rate and heat flux between hydrogen and the inner wall of the vessel are theoretically estimated using fundamental equations and experimental results with accurate thermophysical properties of hydrogen. The generation of temperature distribution and flow due to heat transfer in the vessel during discharge is verified by numerical analysis. Further, the relationship between reference gas temperature and heat flux in the vessel during the release of high-pressure hydrogen is studied. The average heat flux in the vessel is calculated using experimental and numerical analysis. The appropriate reference temperature is obtained using the comparison of the average heat flux in the vessel. In addition, the dominant heat transfer mode during hydrogen discharge is investigated. Numerical analysis shows that natural convection is formed inside the vessel due to a decrease in temperature. The Nusselt numbers in this process are presented as a function of Rayleigh numbers which are obtained by the experimental results and mass and energy conservations. The relationship between the Nusselt and Rayleigh numbers agrees with the heat transfer correlations of natural convections.

08 HYDROGEN↗

Jacobian-free Newton–Krylov method for the simulation of non-thermal plasma discharges with high-order time integration and physics-based preconditioning

A preconditioning framework for the numerical simulation of non-thermal streamer discharges is developed using the Jacobian-free Newton-Krylov (JFNK) method. A reduced plasma fluid model is considered, consisting of electrons, one positive ion, one negative ion, and the electrostatic potential. Here, the plasma kinetics model includes ionization, electron-ion recombination, electron attachment, electron detachment, and ion-ion recombination. The governing equations are made dimensionless, discretized in space with finite differences, and integrated in time with a fully implicit method based on high-order backward differentiation formulas. The preconditioning framework is based on a linearized form of the governing equations and physics-based operator splitting. The efficiency of the preconditioning strategy is assessed through two test cases: streamer propagation between parallel plates and an axisymmetric pin-to-pin discharge. The fully implicit approach overcomes traditional restrictions in the time step size due to processes such as electron drift, electron diffusion, and dielectric relaxation. Excellent performance is observed through relevant statistics of the JFNK solver, although the number of linear iterations increases for the pin-to-pin discharge when nonlinear numerical boundary conditions are imposed at the electrodes. Performance studies show scalability with O(100-1000) processors for O(10M) unknowns with ample room for optimization.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Spatially resolved measurements to improve analytical performance of solution-cathode glow discharge optical-emission spectrometry

We report past studies of the solution-cathode glow discharge (SCGD) revealed that elemental and molecular emission are not spatially homogenous throughout the source, but rather conform to specific zones within the discharge. Exploiting this inhomogeneity can lead to improved analytical performance if emission is collected only from regions of the discharge where analyte species emit strongly and background emission (from continuum, elemental and/or molecular sources) is lower. Effects of this form of spatial discrimination on the analytical performance of SCGD optical emission spectrometry (OES) have been investigated with an imaging spectrograph for fourteen atomic lines, with emphasis on detection limits and precision. Vertical profiles of the emission intensity, signal-to-background ratio, and signal-to-noise ratio were collected and used to determine the optimal region to view the SCGD on a per-element basis. With optimized spatial filtering, detection limits ranged from 0.09–360 ppb, a 1.4–13.6 fold improvement over those obtained when emission is collected from the full vertical profile (1.1– 840 ppb),with a 4.2-fold average improvement. Precision was found to be unaffected by spatial filtering, ranging from0.5–2.6% relative standard deviation (RSD) for all elements investigated, closely comparable to the 0.4–2.4% RSD observed when no spatial filtering is used. In conclusion, spatial profiles also appear useful for identifying optimal line pairs for internal standardization and for flagging the presence of matrix interferences in SCGD-OES.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Liquid Sampling-Atmospheric Pressure Glow Discharge Ionization Source for Elemental Mass Spectrometry

A new, low power ionization source for elemental MS analysis of aqueous solutions is described. The liquid sampling-atmospheric pressure glow discharge (LSAPGD) operates by a process wherein the surface of the liquid emanating from a 75 μm i.d. glass capillary acts as the cathode of the direct current glow discharge. Analytecontaining solutions at a flow rate of 100 μL min-1 are vaporized by the passage of current, yielding gas phase solutes that are subsequently ionized in the < 5 W (maximum of 60 mA and 500 V), ~1 mm3 volume, plasma. The LS-APGD is mounted in place of the normal electrospray ionization source of a Thermo Scientific Exactive orbitrap mass spectrometer system. Basic operating characteristics are described, including the role of discharge power on mass spectral composition, the ability to obtain ultra-high resolution elemental isotopic patterns, and preliminary limits of detection attainable based on the injection of aliquots of multielement standards. While much optimization remains, it is believed that the LS-APGD may present a practical alternative to high-powered (>1 kW) plasma sources typically employed in elemental mass spectrometry, particularly for those cases where costs, operational overhead, and simplicity considerations are important.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Doppler spectroscopy of hydrogen Balmer lines in a hollow cathode glow discharge in ammonia and argon-ammonia mixture

The results of Doppler spectroscopy of hydrogen Balmer lines from a stainless steel (SS) and copper (Cu) hollow cathode (HC) glow discharge in ammonia and argon-ammonia mixture are reported. The experimental profiles in ammonia discharge are fitted well by superposing three Gaussian profiles. The half widths, in energy units, of narrow and medium Gaussians are in the ranges 0.3-0.4 eV and 3-4 eV, respectively, for both hollow cathodes what is expected on the basis of earlier electron beam{yields}NH{sub 3} experiments. The half widths of the largest Gaussian in ammonia are 46 and 55 eV for SS and Cu HC, respectively. In argon-ammonia discharge, three Gaussians are also required to fit experimental profiles. While half widths of narrow and medium Gaussians are similar to those in ammonia, the half widths of the largest Gaussians are 35 and 42 eV for SS and Cu HC, respectively. The half widths of the largest Gaussians in ammonia and in argon-ammonia mixture indicate the presence of excessive Doppler broadening.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characteristics of streamer discharge development between the dielectric-coated sphere-plane electrodes in water

This paper presents the characteristics of the streamer discharge development between the dielectric-coated sphere-plane electrodes in water. In order to study the streamer propagation mechanism, the factors such as polarities, water conductivity, and ambient pressure were taken into consideration. Experimental results demonstrate that the water conductivity and amplitude of applied voltage both have a great influence on mean velocity and brightness of the streamer. When the ambient pressure decreases from 0.1 to 0.0065 MPa, the pressure has little influence on the mean velocities of the streamer in both distilled and tap water for fast streamer. The existence of dielectric coating causes a lower initiation voltage of the streamer for negative polarity than that for positive one. Also, the 10% breakdown voltage (U{sub 10%}) is decreased by 20% under the pressure of 0.0065 MPa than that under the pressure of 0.1 MPa in distilled water, while the U{sub 10%} is almost the same under different pressures in tap water. Based on the analysis of the discharge images and current waveforms as well as the above experimental results, it can be concluded that the streamer propagation is composed of the generation of the microbubbles and the discharge in the bubbles. For subsonic streamer, the generation of the bubbles is more likely a thermal process, whereas for supersonic streamer, the ionization and dissociation of water molecules in high electric field are involved in the bubble generation process.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Computation of dust charge and potential on a static spherical dust grain immersed in rf discharges

Dust charge and potential on static spherical dust grains located in an argon rf discharge under typical laboratory experiment conditions have been computed using a three-dimensional particle-particle-particle-mesh code. Elastic and inelastic collisions have been included in the current model to obtain realistic rf discharge plasma conditions. Dust charge, potential, and potential distribution around the dust have been computed for various sizes of dust placed at different locations in the rf discharge. The dust charge is found to be smaller than the values from the simple orbit motion limited model due to ion-neutral collisions. Further, the dust potential has been found to be increasing with dust size. Moreover, the shielding length of the dust has been found between electron and ion Debye lengths.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spectroscopic study of hydrogen Balmer lines in a microwave-induced discharge

We present the results of a spectroscopic study of hydrogen Balmer line shapes and intensities in a microwave-induced discharge generated in an Evenson resonant cavity at 2.45 GHz in pure hydrogen and hydrogen-argon and hydrogen-helium gas mixtures. The Balmer line shapes do not show signs of excessive Doppler broadening. The discharge parameters-Doppler temperature (980 K), electron excitation temperature (1460-1790 K), and electron density of about 8x10{sup 11} cm{sup -3}--point to a typical microwave-induced discharge.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface radicals in silane/hydrogen discharges

Using threshold ionization mass spectrometry, radical densities have been measured at the substrate surface of a radio frequency discharge in silane plus hydrogen vapor. The conditions are 100-300 Pa pressure and a ratio (R) of hydrogen flow/silane flow typical of discharges used to produce large area amorphous (R=20) and microcrystalline (R=40) silicon. For comparison, we include measurements in pure-silane vapor. The neutral radicals observed in the mixed gases are H, SiH{sub 3}, Si{sub 2}H{sub 2}, and Si{sub 2}H{sub 5}, with decreasing flux in that order. (Si{sub 2}H{sub 4} is also seen in pure silane and SiH{sub 2} for R=20.) The H flux is sufficient for major film etching and restructuring, particularly for R=40. The ion-bombardment species were also measured, establishing that Si{sub y}H{sub n}{sup +} (y=1-3) ion flux is much larger than the H{sub n}{sup +} (n=1-3) flux. The ion flux provides 15{+-}4% of the total Si flux to the film for R=20 and 37{+-}10% for R=40. This is larger than in pure-silane discharges, and it may be very important to film properties due to the impact energy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A proposal for dust-ion-acoustic soliton excitation in a discharge plasma

Nonlinear dynamics of disintegration process of a localized perturbation into dust-ion-acoustic (DIA) solitons is studied. The present paper is a theoretical attempt to propose and model the experimental DIA soliton excitation [Y. Nakamura and A. Sarma, Phys. Plasmas 8, 3921 (2001)] in the presence of both superthermal and trapped electrons. The proposal is designed for low-pressure electrical gas discharges that are in nonequilibrium state. In the discharge plasmas, the electron temperature is usually much greater than ion temperature. Thus, the electron distribution function (DF) that in low-pressure discharges is generally non-Maxwellian has to be modeled. For this purpose, the generalized Lorentzian ({kappa})-DF is used to simulate the electron DF. The formalism is derived near the ion-plasma frequency. In this range of frequency, the ion dynamics is considerable and the DIA solitons are the outcome of the disintegration process. Electron trapping is included in the model as the result of positive polarity of the initial potential. A Gaussian initial perturbation is used to model the localized perturbation. It is shown that a slowly varying dynamics of the order of ion motions causes an initial Gaussian perturbation to be, adiabatically, disintegrated to a number of DIA solitons. The disintegration attributes and influence of both trapped and superthermal electrons on this process, are studied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion-energy distributions at a substrate in reactive magnetron sputtering discharges in Ar/H{sub 2}S from copper, indium, and tungsten targets

Ion-energy distributions from copper, indium, and tungsten targets were measured during reactive sputtering in argon-hydrogen sulfide (H{sub 2}S) mixtures, since reactive magnetron sputtering of sulfides from metallic targets is of increasing interest, especially for photovoltaic applications (buffer and absorber layers, i.e., CuInS{sub 2}, In{sub 2}S{sub 3}, or WS{sub 2}). The mass spectra of the ions show a wide range of molecules H{sub x}S{sub n} derived from H{sub 2}S by plasma-assisted attachment both for positive (n{<=}9) and for negative (n{<=}6) ions. From the copper and the indium targets metallic ions (Cu{sup +}, In{sup +}) could be detected. While tungsten and indium sulfur compounds were found, copper does not form compounds with sulfur, caused by its lower chemical reactivity. Positive (Ar{sup +}, S{sup +}, W{sup +}, Cu{sup +}, In{sup +}, etc.) as well as negative ions (S{sup -}, InS{sup -}, WS{sub 3}{sup -}) were measured for dc and rf (27 MHz) plasma excitations. The positive ions originate mainly from the plasma in front of the substrate and exhibit energies of about 12 eV for the dc and 18 eV for the rf discharge for the substrate at floating potential. The energy difference is caused by the higher electron temperature in the rf compared to the dc discharge. The ion-energy distributions of negative ions exhibit two distinct peaks. The high-energetic peak can be attributed to ions accelerated in the cathode dark space to a high energy (up to more than 400 eV) corresponding to the cathode (target) voltage. The second peak has its maximum at zero energy decreasing steeply up to energies of about 100 eV. These ions are generated by charge-exchange collisions of energetic species from the target (reflected neutral argon, negative sulfur ions, etc.) on their passage from the target to the substrate caused by the high charge-exchange cross section. rf magnetron sputtering leads to significantly lower energies of negative ions from the target, caused by the lower discharge voltages, which could be advantageous for the deposition of active semiconducting sulfide films.

36 MATERIALS SCIENCE↗

A simple dielectric barrier discharge device for generating slot homogeneous plasma in atmospheric pressure air

We report a simple dielectric barrier discharge device for generating slot homogeneous plasma in atmospheric pressure air. It consists of two parallel water electrodes with a distance adjusting micrometer. With increasing the applied voltage, the discharge becomes homogeneous. The electron temperature, vibrational temperature (T{sub V}) of N{sub 2}, and rotational temperature (T{sub R}) of N{sub 2}{sup +} are estimated by optical emission spectroscopy. Both T{sub V} and T{sub R} remain unchanged along the slot in the homogeneous discharge regime. The trend of the T{sub V} with respect to the applied voltage is opposite from that of T{sub R}, while the electron temperature keeps constant with the increasing applied voltage.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Computation of ion drag force on a static spherical dust grain immersed in rf discharges

The ion drag force on static spherical dust grains located in an argon rf discharge under typical laboratory experiment conditions has been computed using a three-dimensional particle-particle-particle-mesh code. Elastic and inelastic collisions have been included in the current model to obtain realistic rf discharge plasma conditions. The ion drag has been computed for various sizes of dust placed at different locations in the rf discharge under different gas pressures. The orbital drag force is typically found larger than the collection drag force. Ion-neutral collisions increase flux to the dust and hence the total drag force for collisional case is found larger than the collisionless case. Within the pressure range investigated, the drag forces do not vary much with pressure. The size dependence of the drag force is nonlinear and agrees well with the forces computed from the analytical models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron temperature control by an external magnetic field in solenoidal inductive discharge

Electron temperature control is performed by controlling the external magnetic field strength in a solenoidal inductive discharge. As the magnetic field strength increases, the electron temperature of the plasma bulk decreases. The temperature at the discharge center falls from 3.1 to 1.5 eV when a 52 G dc magnetic field is applied. This decrease in the temperature is accompanied by a decrease in the plasma density. The change in temperature by the magnetic field is caused by both the electron confinement and the restriction of electron transport by the magnetic field in solenoidal inductive discharge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser triggered single streamer in a pin-to-pin coplanar dielectric barrier discharge

The effect of laser light interaction with alumina surface of a single filament coplanar dielectric barrier discharge has been investigated. It has been found that for laser photon energy lower than the pure alumina photoelectron emission threshold, the laser beam was effective in triggering single streamer discharge below regular ignition voltage threshold. This work demonstrates that triggering of the filamentary discharge occurs due to the laser induced extraction of electrons originally trapped by the plasma radiation at the dielectric surface; the trap energy levels lower than the dielectric band gap explain the easier electron detrapping due to incident laser photons.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗