Results for “Coupled cluster” — Page 44

DOE OSTI2022

Assessment of Thermal Stratification in Versatile Test Reactor Transients

The Versatile Test Reactor (VTR) is a fast-spectrum test reactor currently being developed in the United States under the direction of the US Department of Energy. The conceptual design of the 300 MWth pool-type sodium-cooled fast reactor (SFR) has been led by the US National Laboratories in collaboration with General Electric-Hitachi and Bechtel National Inc. Safety performance analysis for the VTR conceptual design is being performed with the systems thermal-hydraulics (SYSTH) module of the SAS4A/SASSYS-1 liquid-metal reactor safety analysis code system. Since the current model of the VTR employs a simple perfect mixing model for large plena like the hot pool, it is not able to predict temperature variations that may develop during the transient. Prior work simulating the response of SFRs to postulated events like the Protected Station Blackout (PSBO) has shown that the phenomenon of thermal stratification, where stable thermal layers accumulate in the hot pool, may delay the transition to natural circulation and thus impact the predicted transient progression. Thus, an effort has begun to model this transient by integrating a Computational Fluid Dynamics (CFD) model of the hot pool into the SAS4A/SASSYS-1 model of the Primary Heat Transport System during the simulation of the PSBO event. A three-dimensional Volume-Of-Fluid CFD model of the VTR hot pool has been developed for the co-simulation of SAS4A/SASSYS-1 with CFD. In this work, the standalone SAS4A/SASSYS-1 calculation and the standalone CFD calculation based on the SAS4A/SASSYS-1 calculation result were produced on the Idaho National Laboratory High Performance Computing cluster, SAWTOOTH. At this time, only the standalone CFD and SAS4A/SASYS-1 simulation results are provided.

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2020

Effect of Cr(III) Adsorption on the Dissolution of Boehmite Nanoparticles in Caustic Solution

Incorporation of relatively minor impurity metals onto metal (oxy)hydroxides can strongly impact solubility. In complex highly alkaline multicomponent tank waste such as that at the Hanford Nuclear Reservation, tests indicate that the surface area-normalized dissolution rate of boehmite ($γ$-AlOOH) nanomaterials is at least an order of magnitude lower than that predicted for the pure phase. In this work we examine the dissolution kinetics of boehmite coated by adsorbed Cr(III), which adheres at saturation coverages as sparse chemisorbed monolayer clusters. Using 40 nm boehmite nanoplates as a model system, temperature-dependent dissolution rates of pure versus Cr(III)-adsorbed boehmite showed that the initial rate for the latter is consistently several times lower, with an apparent activation energy 16 kJ·mol -1 higher. Although the surface coverage is only around 50%, solution analytics coupled to multimethod solids characterization reveals a phyicochemical armoring effect by adsorbed Cr(III) that substantially reduces the number of dissolution-active sites on particle surfaces. Such findings could help improve kinetics models of boehmite and/or metal ion adsorbed boehmite nanomaterials, ultimately providing a stronger foundation for the development of more robust complex radioactive liquid waste processing strategies.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

An Extension of the Athena++ Code Framework for Radiation-magnetohydrodynamics in General Relativity Using a Finite-solid-angle Discretization

We extend the general-relativistic magnetohydrodynamics (GRMHD) capabilities of Athena++ to incorporate radiation. The intensity field in each finite-volume cell is discretized in angle, with explicit transport in both space and angle properly accounting for the effects of gravity on null geodesics, and with matter and radiation coupled in a locally implicit fashion. Here we describe the numerical procedure in detail, verifying its correctness with a suite of tests. Motivated in particular by black hole accretion in the high-accretion-rate, thin-disk regime, we demonstrate the application of the method to this problem. With excellent scaling on flagship computing clusters, the port of the algorithm to the GPU-enabled AthenaK code now allows the simulation of many previously intractable radiation-GRMHD systems.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2020

Connecting particle interactions to agglomerate morphology and rheology of boehmite nanocrystal suspensions

Rheology imposes significant challenges on processing of complex suspensions such as nuclear waste slurries at the Hanford and Savannah River sites. Understanding rheology connecting to microstructures and underlying particle interactions in complex slurries is therefore important for both fundamental knowledge and practical applications. Here, we use suspensions of aluminum oxyhydroxide minerals in the form of boehmite as an analog of the radioactive waste slurry to gain physical insights on the correlation between particle interactions, microstructures, and slurry rheology. Specifically, we use a combination of Couette rheometry and small-angle scattering techniques (independently and simultaneously) to understand how the slurry microstructure changes under flow and how these structural changes manifest themselves in the bulk rheology of the suspensions. Our experiments show that the boehmite slurries are thixotropic, with the rheology and structure of the suspensions changing with increasing exposure to flow. In the slurries, particle aggregates begin as loose, system-spanning clusters, but exposure to moderate shear rates causes the aggregates to irreversibly consolidate into denser clusters of finite size. The microstructural changes directly influence the rheological properties of the slurries such as viscosity and viscoelasticity. More importantly, our study shows that solution pH affects the amount of structural rearrangement and the kinetics of the rearrangement process, with an increase in pH leading to faster and more dramatic changes in the bulk rheology. Such dynamic microstructural changes and resultant rheology are understood via correlations between particle interactions and strength of particle network, coupled with surface chemistry and anisotropic nature of particle interactions. Nearly identical structural changes are also observed in Poiseuille flow geometries, implying that the observed changes are relevant in the pipe flow conditions present during waste processing.

Weston, Javen S.↗

DOE OSTI2023

Time-Resolved Radioluminescence of the Polynuclear Copper(I) Phosphor Cu4I6²–. Different Temporal responses to Photo, X-Ray, β-Ray and α-Particle Excitation

Described for the first time are the time-resolved radioluminescence (TRRL) properties of the highly luminescent copper(I) cluster Cu4I62– using X-ray, b-ray and a-particle excitation. The copper(I) phosphors are two crystalline salts of this anion, [Na2(18-crown-6)2(H2O)3][Cu4I6] (I) and [Li(benzo-15-crown-5)2(H2O)]2[Cu4I6] (II), that had been shown to display strong photoluminescence (PL) when excited with ultraviolet light. The integrated radioluminescence (RL) spectra observed when pulsed X-rays were used as the excitation source are virtually the same as the PL spectra under comparable conditions. These temporal RL spectra are invariant at all observation times indicating that the observed scintillation occurs from a common excited state (or set of excited states). When the TRRL is collected from excitation with a pulsed X-ray source, b-ray decay from 90Sr or a-decay from 244Cm, the longer components (>2 μs) of the TRRL displayed (in each case) lifetimes comparable to those of the strictly exponential PL decays recorded under pulsed laser UV excitation. However, at shorter observation times (< 500 ns), the RL decay deviated from the exponential model, indicating a markedly different temporal luminescence behavior when these materials were excited with pulsed high energy radiation. Furthermore, this effect was the most pronounced for the a-particle excitation. These results suggest that the absorption of a very high energy X-ray photon, b-ray or a-particle at a site within the crystalline solid leads to a high local density of electronic excited states and that coupling between these states provides an alternative channel for excited state decay. Given that the patterns observed

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2024

Facile electrocatalytic proton reduction by a [Fe–Fe]-hydrogenase bio-inspired synthetic model bearing a terminal CN — ligand

An azadithiolate bridged CN — bound pentacarbonyl bis-iron complex, mimicking the active site of [Fe–Fe] H 2 ase is synthesized. The geometric and electronic structure of this complex is elucidated using a combination of EXAFS analysis, infrared and Mössbauer spectroscopy and DFT calculations. The electrochemical investigations show that complex 1 effectively reduces H + to H 2 between pH 0–3 at diffusion-controlled rates (10 11 M —1 s —1 ) i.e. 10 8 s —1 at pH 3 with an overpotential of 140 mV. Electrochemical analysis and DFT calculations suggests that a CN— ligand increases the p K a of the cluster enabling hydrogen production from its Fe(I)–Fe(0) state at pHs much higher and overpotential much lower than its precursor bis-iron hexacarbonyl model which is active in its Fe(0)–Fe(0) state. The formation of a terminal Fe–H species, evidenced by spectroelectrochemistry in organic solvent, via a rate determining proton coupled electron transfer step and protonation of the adjacent azadithiolate, lowers the kinetic barrier leading to diffusion controlled rates of H 2 evolution. The stereo-electronic factors enhance its catalytic rate by 3 order of magnitude relative to a bis-iron hexacarbonyl precursor at the same pH and potential.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Impact of Local Structure in Supported CaO Catalysts for Soft-Oxidant-Assisted Methane Coupling Assessed through Ca K-Edge X-ray Absorption Spectroscopy

Not Available

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Gravitational waves and galaxies cross-correlations: a forecast on GW biases for future detectors

ABSTRACT Gravitational waves (GWs) have rapidly become important cosmological probes since their first detection in 2015. As the number of detected events continues to rise, upcoming instruments like Einstein Telescope (ET) and Cosmic Explorer (CE) will observe millions of compact binary mergers. These detections, coupled with galaxy surveys by instruments such as the Dark Spectroscopic Energy Instrument (DESI), Euclid, and the Vera Rubin Observatory, will provide unique information on the large-scale structure of the universe by cross-correlating GWs with the distribution of galaxies hosting them. In this paper, we focus on how cross-correlations constrain the clustering bias of GWs emitted by the coalescence of binary black holes (BBHs). This parameter links BBHs to the underlying dark matter distribution, hence informing us how they populate galaxies. Using a multitracer approach, we forecast the precision of these measurements under different survey combinations. Our results indicate that current GW detectors will have limited precision, with measurement errors as high as $\displaystyle \sim 50~{{\ \rm per\ cent}}$. However, third-generation detectors like ET, when cross-correlated with Legacy Survey of Space and Time (LSST) data, can improve clustering bias measurements to within 2.5 per cent. Furthermore, we demonstrate that these cross-correlations can enable a per cent-level measurement of the magnification lensing effect on GWs. Despite this, there is a degeneracy between magnification and evolution biases, which hinders the precision of both. This degeneracy is most effectively addressed by assuming knowledge of one bias or targeting an optimal redshift range of $\displaystyle 1 \lt z \lt 2.5$. Our analysis opens new avenues for studying the distribution of BBHs and testing the nature of gravity through large-scale structure.

Zazzera, Stefano (ORCID:0000000158979221)↗

DOE OSTI2024

Long-range three-dimensional magnetic structures of the spin S =1 hexamer cluster fedotovite-like A 2 Cu 3 O ( SO 4 ) 3 ( A 2 = K 2 , NaK, Na 2 ): A neutron diffraction study

The crystal and magnetic structures of the spin S = 1 hexamer cluster fedotovite-like A 2 Cu 3 O(SO 4 ) 3 (A 2 = K 2 , NaK, Na 2 ) were studied by neutron powder diffraction at temperatures 1.6–290 K. The crystal structures in all compounds are well refined in the monoclinic space group C2/c. The basic magnetic units of the compounds are copper hexamers, which are coupled by weak superexchange interactions giving rise to three-dimensional long-range magnetic order below 3.0 < T N < 4.7 K. We have found that for A 2 = K 2 and NaK the propagation vector of the magnetic structure is k = [0,0,0], and the coupling of the Cu hexamers is ferromagnetic (FM) along the ab diagonal and antiferromagnetic along the bc diagonal. In contrast, for A = Na the propagation vector is k = [0,1,0], and the Cu hexamers are coupled antiferromagnetically (AFM) along the ab diagonal. Further, the hexamers are formed by three Cu pairs arranged along the b axis. The calculated spin expectation values $\langle s \rangle$ for the simplest symmetric spin Hamiltonian (obtained from inelastic neutron spectroscopy) of the isolated hexamers in the mean field amounted to $\langle s \rangle$ = 3/8 for the side spins Cu1 and Cu2 and $\langle s \rangle$ = 1/4 for Cu3 in the middle. The Cu spins are FM coupled in pairs and AFM between neighboring pairs. The experimental magnetic moments of the Cu 2+ ions turn out to be not completely collinear due to spin frustrations within the weak interhexamer interactions. The sizes of magnetic moments of Cu in the hexamers determined from the diffraction data are in fair agreement with the calculated values.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Quantifying uncertainties due to irreducible three-body forces in deuteron-nucleus reactions

Deuteron-induced nuclear reactions are an essential tool for probing the structure of nuclei as well as astrophysical information such as (n, γ) cross sections. The deuteron-nucleus system is typically described within a Faddeev three-body model consisting of a neutron (n), a proton (p), and the target nucleus (A) interacting through pairwise phenomenological potentials. While Faddeev techniques enable the exact description of the three-body dynamics, their predictive power is limited in part by the omission of irreducible neutron-proton-nucleus three-body force (n–p–A 3BF). Here, our goal is to quantify systematic uncertainties stemming from the reduction of deuteron-nucleus (d + A) dynamics to a picture of three pointlike nuclear clusters interacting via pairwise nucleon-nucleus forces, using as testing grounds d + α scattering and the 6 Li ground state. We particularly focus on quantifying uncertainties arising from the full antisymmetrization of the (A + 2)-body system with the target nucleus fixed in its ground state. We adopt the ab initio no-core shell model coupled with the resonating group method (NCSM/RGM) to compute microscopic n–α and p–α interactions, and use them in a three-body description of the d + α system by means of momentum-space Faddeev-type equations. Simultaneously, we also carry out ab initio calculations of d + α scattering and 6 Li ground state by means of six-body NCSM/RGM calculations to serve as a benchmark for the three-body model predictions given by the Faddeev calculations. By comparing the Faddeev and NCSM/RGM results, we show that the irreducible n–p–α 3BF has a non-negligible effect on bound state and scattering observables alike. Specifically, the Faddeev approach yields a 6 Li ground state that is approximately 600 keV shallower than the one obtained with the NCSM/RGM. Additionally, the Faddeev calculations for d + α scattering yield a 3 + resonance that is located approximately 400 keV higher in energy compared to the NCSM/RGM result. The shape of the d + α angular distributions computed using the two approaches also differ, owing to the discrepancy in the predictions of the 3 + resonance energy. The Faddeev three-body model predictions for d + α scattering and 6 Li using microscopic n–α and p–α potentials differ from those computed microscopically with the NCSM/RGM. These discrepancies are due to the n–p–α 3BF, which arises from two-nucleon exchange terms in the microscopic d–α interaction and are not accounted for in the three-body model Faddeev calculations. This study lays the foundation for future parametrizations of the 3BF due to Pauli exclusion principle effects in improved three-body calculations of deuteron-induced reactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2026

From Cell to System: Accelerated hpc Simulations of BESS Aging under Frequency Regulation and Arbitrage use cases

Lithium-ion battery energy storage systems (BESS) packs have emerged as a leading solution for grid-scale energy storage, enhancing resiliency and balancing load fluctuations. Yet, experimental characterization of large-format LIB packs-particularly to assess performance and degradation over hundreds of cycles - demands substantial hardware investment and multi-year testing campaigns. In this work, we couple a hierarchical, physics-based modeling framework agnostic to electrode chemistries with high-performance computing to accelerate systems level evaluation by upto two orders of magnitude. Building on the open-source liionpack platform, we implement cell, module, and pack-scale electrochemical models enriched with mechanistic aging mechanisms and deploy them on an HPC cluster to simulate 150−200kWh systems over 500 - 1,000 cycles with in days. We subject these virtual B ESS to both constant-current cycling and realistic grid service profiles spanning frequency regulation, ramp-rate support, and energy arbitrage-and quantify the resulting degradation patterns. Our results reveal that localized cell aging can induce substantial nonuniformity at module and pack levels, with service-specific cycling protocols driving distinct aging modes. This rapid, multiscale modeling approach provides a powerful design-space exploration tool for optimizing electrical architecture, control strategies, and operational schedules to prolong pack lifetime and lower total cost of ownership.

Ayalasomayajula, Surya [ORNL] (ORCID:0009000860788↗

DOE OSTI2026

Hydrogeological assessment of CO2 containment assurance and wellbore integrity at a Gulf Coast storage site

Abstract A large-scale carbon capture and storage (CCS) initiative on the Texas Gulf Coast serves as a premier demonstration of the U.S. Department of Energy’s CarbonSAFE program. Targeting deep saline formations, specifically Oligo-Miocene deltaic sequences, the project aims to establish technical and commercial viability for geologic CO2 storage within a major industrial corridor. This study provides a rigorous hydrogeological assessment to support Class VI permitting by quantifying the high degree of containment security. Utilizing a compositional reservoir simulator, we developed a suite of 27 distinct simulation cases to evaluate vertical plume dynamics near both planned injection wells and proximal legacy infrastructure. To ensure numerical accuracy near wellbores, we implemented a refined mesh strategy, determining that a 5.6 ft × 5.6 ft grid refinement offered the optimal balance between computational efficiency and descriptive precision. The modeling framework utilized a systematic sensitivity-based approach to evaluate the mechanical redundancy of the subsurface system by performing a bounding analysis of wellbore interfaces against hypothetical high-permeability microannuli. By systematically isolating competing physical drivers, including permeability, porosity, gas hysteresis, thermal gradients, salinity, and solubility trapping (quantified via Henry’s law with dynamically adjusted coefficients), this work moves beyond binary assessments to establish a nuanced hierarchy of containment factors. The results confirm that primary trapping mechanisms (e.g., gas hysteresis and solubility), combined with the site's unique geomechanical stratigraphy, significantly restrict vertical mobility and reinforce the robust containment security of the reservoir. Baseline results demonstrate substantial vertical separation between the CO2 plume and the upper confining system, ensuring robust containment. Sensitivity analysis reveals that even under highly conservative bounding scenarios—assuming theoretical 10-Darcy pathways at specific wellbore locations—the 2,900-ft thick multi-layered confining zone remains a reliable barrier. In these hypothetical upper-bound cases, peak upward fluxes of CO2 and saltwater after 15 years of injection remain localized and dissipate rapidly within the lower sections of the confining interval, leaving the integrity of the seal uncompromised. Furthermore, the study identifies that while localized wellbore pathways define theoretical upper bounds of vertical migration, the Area of Review (AoR) is primarily sensitive to regional thermal gradients and hysteresis, which can influence the AoR by over 3,000 acres in pessimistic configurations. Also, primary trapping mechanisms, specifically gas hysteresis and solubility, work in tandem with the Gulf Coast’s unique geomechanical stratigraphy to significantly restrict vertical mobility. Ductile, smectite-rich mudstones facilitate natural borehole convergence and the self-healing of potential conduits, creating a natural geomechanical bridge that effectively mitigates migration potential at both current injection points and legacy-well locations. This comprehensive modeling effort demonstrates that the integration of high-resolution wellbore simulations and regional geomechanical observations confirms the long-term storage security of the studied site, providing a physics-based foundation for industrial-scale CCS deployments. This modeling framework establishes a baseline for future research into coupled geomechanical effects, such as time-dependent borehole convergence, to further refine long-term containment projections. Acknowledgements We thank the Gulf Coast Carbon Center (GCCC) at the Bureau of Economic Geology for foundational research support. We appreciate Alex Bump for technical guidance and David Hoffman for model mesh generation. This work used TACC’s Frontera cluster for simulations and CMG Ltd. software licenses provided to UT-Austin. This material is based upon work supported by the Department of Energy under Award Number DE-FE0032338. Disclaimer This material is based upon work supported by the U.S. Department of Energy’s Fossil Energy and Carbon Management Office under the CarbonSAFE program, award Number DE-FE0032338. The views expressed herein do not necessarily represent the views of the U.S. Department of Energy or the United States Government.

58 GEOSCIENCES↗

DOE OSTI2026

Hydrogeological assessment of CO2 containment assurance and wellbore integrity at a Gulf Coast storage site

Abstract A large-scale carbon capture and storage (CCS) initiative on the Texas Gulf Coast serves as a premier demonstration of the U.S. Department of Energy’s CarbonSAFE program. Targeting deep saline formations, specifically Oligo-Miocene deltaic sequences, the project aims to establish technical and commercial viability for geologic CO2 storage within a major industrial corridor. This study provides a rigorous hydrogeological assessment to support Class VI permitting by quantifying the high degree of containment security. Utilizing a compositional reservoir simulator, we developed a suite of 27 distinct simulation cases to evaluate vertical plume dynamics near both planned injection wells and proximal legacy infrastructure. To ensure numerical accuracy near wellbores, we implemented a refined mesh strategy, determining that a 5.6 ft × 5.6 ft grid refinement offered the optimal balance between computational efficiency and descriptive precision. The modeling framework utilized a systematic sensitivity-based approach to evaluate the mechanical redundancy of the subsurface system by performing a bounding analysis of wellbore interfaces against hypothetical high-permeability microannuli. By systematically isolating competing physical drivers, including permeability, porosity, gas hysteresis, thermal gradients, salinity, and solubility trapping (quantified via Henry’s law with dynamically adjusted coefficients), this work moves beyond binary assessments to establish a nuanced hierarchy of containment factors. The results confirm that primary trapping mechanisms (e.g., gas hysteresis and solubility), combined with the site's unique geomechanical stratigraphy, significantly restrict vertical mobility and reinforce the robust containment security of the reservoir. Baseline results demonstrate substantial vertical separation between the CO2 plume and the upper confining system, ensuring robust containment. Sensitivity analysis reveals that even under highly conservative bounding scenarios—assuming theoretical 10-Darcy pathways at specific wellbore locations—the 2,900-ft thick multi-layered confining zone remains a reliable barrier. In these hypothetical upper-bound cases, peak upward fluxes of CO2 and saltwater after 15 years of injection remain localized and dissipate rapidly within the lower sections of the confining interval, leaving the integrity of the seal uncompromised. Furthermore, the study identifies that while localized wellbore pathways define theoretical upper bounds of vertical migration, the Area of Review (AoR) is primarily sensitive to regional thermal gradients and hysteresis, which can influence the AoR by over 3,000 acres in pessimistic configurations. Also, primary trapping mechanisms, specifically gas hysteresis and solubility, work in tandem with the Gulf Coast’s unique geomechanical stratigraphy to significantly restrict vertical mobility. Ductile, smectite-rich mudstones facilitate natural borehole convergence and the self-healing of potential conduits, creating a natural geomechanical bridge that effectively mitigates migration potential at both current injection points and legacy-well locations. This comprehensive modeling effort demonstrates that the integration of high-resolution wellbore simulations and regional geomechanical observations confirms the long-term storage security of the studied site, providing a physics-based foundation for industrial-scale CCS deployments. This modeling framework establishes a baseline for future research into coupled geomechanical effects, such as time-dependent borehole convergence, to further refine long-term containment projections. Acknowledgements We thank the Gulf Coast Carbon Center (GCCC) at the Bureau of Economic Geology for foundational research support. We appreciate Alex Bump for technical guidance and David Hoffman for model mesh generation. This work used TACC’s Frontera cluster for simulations and CMG Ltd. software licenses provided to UT-Austin. This material is based upon work supported by the Department of Energy under Award Number DE-FE0032338. Disclaimer This material is based upon work supported by the U.S. Department of Energy’s Fossil Energy and Carbon Management Office under the CarbonSAFE program, award Number DE-FE0032338. The views expressed herein do not necessarily represent the views of the U.S. Department of Energy or the United States Government.

58 GEOSCIENCES↗

DOE OSTI2025

Exploring Anomalous Photoelectron Angular Distributions in the Photoelectron Spectra of Gd 3 O 3 – : Study of Gd 3 O 2 – and Gd 3 O 3 – Using Photoelectron Spectroscopy and Density Functional Theory Calculations

Anion photoelectron (PE) spectra of lanthanide oxide clusters obtained previously have exhibited anomalous photoelectron angular distributions which were attributed to strong PE–valence electron (PEVE) interactions. Here, to further explore this effect, we have obtained the PE spectra of Gd 3 O 2 – and Gd 3 O 3 – , two clusters that have similarly complex electronic structures but contrasting symmetries. The spectra exhibit manifolds of detachment transitions at similar binding energies in a 0.5 eV window of energy. The electron affinity of Gd 3 O 2 is measured to be 1.29 ± 0.05 eV, and that of Gd 3 O 3 is 1.31 ± 0.05 eV. As seen in previous studies on lanthanide oxide cluster anions in lower than conventional oxidation states, transitions in spectra obtained lower photon energies are more congested than those obtained with higher photon energy, a signature of strong PEVE interactions. While the detachment transitions have predominantly parallel photoelectron angular distributions (PAD), the PAD varies across the manifold of transitions in the PE spectrum of Gd 3 O 3 – in a way that suggests four different subgroups of transitions. Results of calculations on Gd 3 O 2 – suggest kite or V-shape structures with antiferromagnetic coupling between one of the 4f 7 subshells with the two others. Calculations on Gd 3 O 3 – more definitively point to ring structures with a nearly isoenergetic ferromagnetically coupled high spin (24-tet) state and a dectet state in which one of the 4f 7 subshells is antiferromagnetically coupled with the other two. Taking these results as qualitative, we propose that strong mixing between the unperturbed states predicted computationally leads to overlapping transitions with different PADs.

anions↗

DOE OSTI2024

Impact of mineral and non-mineral sources of iron and sulfur on the metalloproteome of Methanosarcina barkeri

Methanogens often inhabit sulfidic environments that favor the precipitation of transition metals such as iron (Fe) as metal sulfides, including mackinawite (FeS) and pyrite (FeS 2 ). These metal sulfides have historically been considered biologically unavailable. Nonetheless, methanogens are commonly cultivated with sulfide (HS - ) as a sulfur source, a condition that would be expected to favor metal precipitation and thus limit metal availability. Recent studies have shown that methanogens can access Fe and sulfur (S) from FeS and FeS 2 to sustain growth. As such, medium supplied with FeS 2 should lead to higher availability of transition metals when compared to medium supplied with HS - . Here, we examined how transition metal availability under sulfidic (i.e., cells provided with HS - as sole S source) versus non-sulfidic (cells provided with FeS 2 as sole S source) conditions impact the metalloproteome of Methanosarcina barkeri Fusaro. To achieve this, we employed size exclusion chromatography coupled with inductively coupled plasma mass spectrometry and shotgun proteomics. Significant changes were observed in the composition and abundance of iron, cobalt, nickel, zinc, and molybdenum proteins. Among the differences were alterations in the stoichiometry and abundance of multisubunit protein complexes involved in methanogenesis and electron transport chains. Furthermore, our data suggest that M. barkeri utilizes the minimal iron-sulfur cluster complex and canonical cysteine biosynthesis proteins when grown on FeS 2 but uses the canonical Suf pathway in conjunction with the tRNA-Sep cysteine pathway for iron-sulfur cluster and cysteine biosynthesis under sulfidic growth conditions.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2025

Massively parallel phase-field simulations targeting exascale

The interface thickness in the phase-field (PF) method limits its simulation scales. Consequently, large-scale PF simulations become prohibitively expensive for resolving the extremely fine microstructures that typically form during rapid solidification processing. This challenge is significant in predicting microstructure evolution in metal additive manufacturing and has been identified by the United States Department of Energy’s Exascale Computing Project. Here, to address this, we develop a multi-GPU and MPI-based massively parallel simulation code, utilizing state-of-the-art algorithms, software, and libraries, for large-scale three-dimensional (3D) PF simulations. We report the first GPU-parallel PF simulations on Frontier (currently the second TOP500 exascale cluster) and Summit machines, taking dendritic growth as an example problem. We evaluate the parallel performance of our implementation using scaling studies with more than 24 000 GPUs (among the largest known computations to date) and the acceleration performance using large-scale simulations of dendritic growth in 3D. Finally, massively parallel GPUs in these supercomputers enabled the first coupled multiscale simulations of laser melting and subsequent dendritic solidification on the scale of a full melt-pool, demonstrating the feasibility of performing PF simulations with a point total over 2 billion grid points within an acceptable time.

Exascale↗

DOE OSTI2024

Structural Insight into a Sixteen Cyanine Dye Construct via Exciton–Exciton Annihilation

Molecular (dye) aggregates play a prominent role in light harvesting and are of interest in quantum information science; however, there are limited reports hat programmably assemble many (>4) dye aggregates featuring strong coupling and exciton delocalization. Using oligonucleotides with four Cy5s covalently linked in series along the phosphate backbone, we bring four, eight, and sixteen Cy5s in close proximity by assembling four-armed junctions. We elucidate their structure via gel electrophoresis and steady-state and transient optical spectroscopy. We find that Cy5 has a strong propensity to form tetramer clusters, where the exciton is delocalized over all four Cy5s, that the exciton is not delocalized beyond tetramer clusters in the eight and sixteen Cy5 constructs, and that the sixteen Cy5 construct may consist of pairs of tetramer clusters that are isolated from one another. Many-dye aggregates such as these may serve useful as antennae for their intense light absorption and spatially directed energy transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Deep learning-enabled probing of irradiation-induced defects in time-series micrographs

Modeling time-series data with convolutional neural networks (CNNs) requires building a model to learn in batches as opposed to training sequentially. Coupling CNNs with in situ or operando techniques opens the possibility of accurately segmenting dynamic reactions and mass transport phenomena to understand how materials behave under the conditions in which they are used. In this article, in situ ion irradiation transmission electron microscopy (TEM) images are used as inputs into the CNN to assess the defect generation rate, defect cluster density, and saturation of defects. We then use the output segmentation maps to correlate with conventional TEM micrographs to assess the model’s ability to detail nanoscale interactions. Next, we discuss the implications of preprocessing and hyperparameters on model variability, accuracy when expanded to other datasets, and the role of regularization when controlling model variance. Ultimately, we eliminate human bias when extrapolating physical metrics, speed up analysis time, decouple reactions that happen at 100 ms intervals, and deploy models that are both accurate and transferable to similar experiments.

Burns, Kory (ORCID:0000000158019909)↗