Smooth Particle Hydrodynamic Code Predictions for Meteoroid Damage to Thermal Protection Systems Shielded By Composite Structures
Explore the source record for details and available documents.
Brooke Corbett↗
SEARCH · Engineering Papers
Results for “Composite particles”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The source of sublimates on the Apollo 15 green and Apollo 17 orange glass samples
Elemental analyses of the thin film of micromounds which coat the surfaces of Apollo 15 green glass and Apollo 17 orange glass are reported. It is thought that Zn, Ga, Pb, Cu, Tl, S, F, and Cl condensed as a sublimate on the outside surface of these glass particles in lava fountains about 3.4 and 3.6 b.y. ago (Apollos 15 and 17, respectively). The heavy metals enriched in these samples may have been mobilized in a halide- and sulfide-rich vapor, while the source of these elements and of the glass may be a sulfide- and halide-rich pyroxenite inside the moon. The isotopic composition of lead on the surface of individual particles was determined, and the composition is considered with respect to the evolution of the source region. The lead on the surfaces is similar to lead that has been mixed into other soils and breccias at nearby sites.
Meyer, C., Jr.↗
Heterogeneous Chemistry Related to Stratospheric Aircraft
Emissions from stratospheric aircraft that may directly or indirectly affect ozone include NO(y), H2O, soot and sulfuric acid. To fully assess the impact of such emissions, it is necessary to have a full understanding of both the homogeneous and heterogeneous transformations that may occur in the stratosphere. Heterogeneous reactions on stratospheric particles play a key role in partitioning ozone-destroying species between their active and reservoir forms. In particular, heterogeneous reactions tend to activate odd chlorine while deactivating odd nitrogen. Accurate modeling of the net atmospheric effects of stratospheric aircraft requires a thorough understanding of the competing effects of this activation/deactivation. In addition, a full understanding of the potential aircraft impacts requires that the abundance, composition and formation mechanisms of the particles themselves be established. Over the last three years with support from the High Speed Research Program, we have performed laboratory experiments to determine the chemical composition, formation mechanism, and reactivity of stratospheric aerosols.
Tolbert, Margaret A.↗
On the albedo of the interplanetary dust
The zodiacal light brightness and measured spatial density of the interplanetary dust lead to a mean geometric albedo of 0.24 for the dust particles near 1 AU; whereas the composition of collected micrometeroids suggests a geometric albedo of less than or approximately equal to 0.1. The data do not support the very low albedo (0.01 or less) proposed by Cook (1978). The evidence is against a change in the mean particle albedo between 0.1 and 2 AU. Beyond 2 AU, the data are unclear and a change in albedo is not ruled out.
Hanner, M. S.↗
Fracto-emission from graphite/epoxy composites
Fracto-emission (FE) is the emission of particles and photons during and following crack propagation. Electrons (EE), positive ions (PIE), and excited and ground state neutrals (NE) were observed. Results of a number of experiments involving principally graphite/epoxy composites and Kevlar single fibers are presented. The physical processes responsible for EE and PIE are discussed as well as FE from fiber- and particulate-reinforced composites.
Dickinson, J. T.↗
Feasibility study of a meteoroid composition analyzer spectrographic system Final report
Micrometeoroid composition determined using spectrographic analyzer to measure emission spectra of heated particles
PARTICLE MOTION↗
Toward a descriptive model of solar particles in the heliosphere
During a workshop on the interplanetary charged particle environment held in 1987, a descriptive model of solar particles in the heliosphere was assembled. This model includes the fluence, composition, energy spectra, and spatial and temporal variations of solar particles both within and beyong 1 AU. The ability to predict solar particle fluences was also discussed. Suggestions for specific studies designed to improve the basic model were also made.
Shea, M. A.↗
Chemical characterization of seven Large Area Collector particles by SXRF
Optical microscopy and synchrotron X-ray fluorescence (SXRF) are used to analyze the chemical composition of seven dark-appearing cosmic-dust particles obtained in the stratosphere during NASA Johnson Large Area Collector flights. The experimental setup and procedures are outlined, and the results are presented in extensive tables. Three of the particles had abundances similar to those of chondrites (except for low Ca values in one particle); two had a metallic appearance and spectra dominated by Fe and Zn; one contained Cu and Cr plus small amounts of Fe and Zn; and one had igneous-type abundances of minor and trace elements while containing all of the elements seen in chondritic particles, suggesting it may be of extraterrestrial origin.
Flynn, G. J.↗
Patches for Repairing Ceramics and Ceramic-Matrix Composites
Patches consisting mostly of ceramic fabrics impregnated with partially cured polymers and ceramic particles are being developed as means of repairing ceramics and ceramic-matrix composites (CMCs) that must withstand temperatures above the melting points of refractory metal alloys. These patches were conceived for use by space-suited, space-walking astronauts in repairing damaged space-shuttle leading edges: as such, these patches could be applied in the field, in relatively simple procedures, and with minimal requirements for specialized tools. These design characteristics also make the patches useful for repairing ceramics and CMCs in terrestrial settings. In a typical patch as supplied to an astronaut or repair technician, the polymer would be in a tacky condition, denoted as an A stage, produced by partial polymerization of a monomeric liquid. The patch would be pressed against the ceramic or CMC object to be repaired, relying on the tackiness for temporary adhesion. The patch would then be bonded to the workpiece and cured by using a portable device to heat the polymer to a curing temperature above ambient temperature but well below the maximum operating temperature to which the workpiece is expected to be exposed. The patch would subsequently become pyrolized to a ceramic/glass condition upon initial exposure to the high operating temperature. In the original space-shuttle application, this exposure would be Earth-atmosphere-reentry heating to about 3,000 F (about 1,600 C). Patch formulations for space-shuttle applications include SiC and ZrO2 fabrics, a commercial SiC-based pre-ceramic polymer, and suitable proportions of both SiC and ZrO2 particles having sizes of the order of 1 m. These formulations have been tailored for the space-shuttle leading-edge material, atmospheric composition, and reentry temperature profile so as to enable repairs to survive re-entry heating with expected margin. Other formulations could be tailored for specific terrestrial applications.
Hogenson, Peter A.↗
Minerology and Crystallography of Some Itokawa Particles Returned by the Hayabusa Mission
JAXA Hayabusa mission success-fully returned particles of the asteroid Itokawa to the earth in 2010. The recovered particles were carefully studied by the preliminary examination (PE) team and the obtained results are providing significant and unique information about the formation and evolution of meteorite parent bodies [1-6]. These particles further revealed that their mineral compositions and oxygen isotopes are close to those of equilibrated LL chon-drites [1,2], which matches with the observation at the orbit [7]. After the PE, JAXA distributed the samples as international AO study and we received 4 new and 3 PE particles. The new samples may contain some exot-ic components that have not been found by the PE study, and are of special interest. We have performed a detailed mineralogical and crystallographic study on these particles and here report the results.
Mikouchi, T.↗
The zonally averaged circulation, temperature, and compositional structure of the lower thermosphere and variations with geomagnetic activity
A zonally averaged chemical-dynamical model of the thermosphere is used to examine the effect of high-latitude particle and Joule heating on the neutral composition, temperature, and winds at solstice for solar minimum conditions. The meridional circulation forced by solar heating alone is a summer-to-winter flow, with a winter enhancement in atomic oxygen. The high-latitude heat sources drive mean circulation cells that reinforce the solar-driven circulation in the summer hemisphere and oppose this circulation in the winter hemisphere. The changes in wind and temperature caused by the high-latitude heat sources increase the relative concentration of N2 and O2 in the high-latitude upper thermosphere and decrease the O concentration in the high-latitude lower thermosphere. For prolonged moderate levels of geomagnetic activity the peak atomic oxygen density in the polar regions can decrease by factors of 2-3 from geomagnetic quiet conditions.
Roble, R. G.↗
Atmospheric particulate measurements in Norfolk, Virginia
Characterization of atmospheric particulates was conducted at a site near the center of Norfolk, Virginia. Air quality was measured in terms of atmospheric mass loading, particle size distribution, and particulate elemental composition for a period of 2 weeks. The objectives of this study were (1) to establish a mean level of air quality and deviations about this mean, (2) to ascertain diurnal changes or special events in air quality, and (3) to evaluate instrumentation and sampling schedules. Simultaneous measurements were made with the following instruments: a quartz crystal microbalance particulate monitor, a light-scattering multirange particle counter, a high-volume air sampler, and polycarbonate membrane filters. To assess the impact of meteorological conditions on air quality variations, continuous data on temperature, relative humidity, wind speed, and wind direction were recorded. Particulate elemental composition was obtained from neutron activation and scanning electron microscopy analyses of polycarbonate membrane filter samples. The measured average mass loading agrees reasonably well with the mass loadings determined by the Virginia State Air Pollution Control Board. There are consistent diurnal increases in atmospheric mass loading in the early morning and a sample time resolution of 1/2 hour seems necessary to detect most of the significant events.
Storey, R. W., Jr.↗
The case for at least three mare basalt magmas at the Luna 24 landing site
Petrographic and electron microprobe studies have been carried out for 1230 particles from the Luna 24 drill core. At least three mare basalts were distinguished on the basis of major and minor element chemical compositions of pyroxenes. Mg-rich monomineralic particles of olivine and pyroxene defined one major type. The other two magmas were identified by the Ti/(Ti + Cr) ratio at constant Fe/(Fe + Mg) ratio in pyroxenes derived from polymineralic igneous lithic fragments. Whole rock chemical analyses for V and Cr also provided evidence for these distinct magmas.
Nielsen, R. L.↗
Aerosol particles and the formation of advection fog
A study of numerical simulation of the effects of concentration, particle size, mass of nuclei, and chemical composition on the dynamics of warm fog formation, particularly the formation of advection fog, is presented. This formation is associated with the aerosol particle characteristics, and both macrophysical and microphysical processes are considered. In the macrophysical model, the evolution of wind components, water vapor content, liquid water content, and potential temperature under the influences of vertical turbulent diffusion, turbulent momentum, and turbulent energy transfers are taken into account. In the microphysical model, the supersaturation effect is incorporated with the surface tension and hygroscopic material solution. It is shown that the aerosol particles with the higher number density, larger size nuclei, the heavier nuclei mass, and the higher ratio of the Van't Hoff factor to the molecular weight favor the formation of the lower visibility advection fogs with stronger vertical energy transfer during the nucleation and condensation time period.
Hung, R. J.↗
Auroral heating and the composition of the neutral atmosphere.
Heating of the neutral atmosphere by auroral particle fluxes and by orthogonal electric fields is responsible for large changes in the thermospheric composition that have been observed by satellite mass spectrometers. Vertical winds of a few meters per second are produced in the region subject to auroral heating; this vertical upwelling drives circulation cells that extend the effects of heating in the auroral region on a global scale. Our analysis focuses on the initial phase of a magnetic storm within the auroral region.
Hays, P. B.↗
Improved Characterization of PSC Processes Derived from a Third-Generation CALIOP and MLS Detection and Composition Classification Algorithm
The new 3-year CloudSat and CALIPSO Science Team project described in this poster will use a unique combination of data from the Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) instrument on CALIPSO and the Microwave Limb Sounder (MLS) on Aura, in conjunction with supporting meteorological information and detailed modeling studies, to advance our understanding of polar stratospheric cloud (PSC) processes and their role in ozone depletion. We will develop a third-generation (Gen3) PSC detection and composition algorithm that incorporates a new, more robust two-dimensional, multi-channel CALIOP feature detection scheme (2D-McDA). We will also devise and implement an improved two-dimensional PSC composition classification scheme that utilizes multiple parameters (e.g., CALIOP 532-nm parallel and perpendicular scattering ratios, CALIOP 1064-nm total scattering ratio, MLS HNO3 and H2O, ambient temperature, and temperature histories) in a Bayesian approach to determine the most likely PSC composition and help constrain solid PSC particle number density and size/shape. The combined CALIOP/MLS analyses will allow us to study in detail the full life cycle of PSCs and their resulting impact on gas-phase HNO3 and H2O, which should lead to improved parameterizations of PSC microphysics in global CCMs where detailed particle information is not available. The Gen3 CALIOP PSC algorithm will be a natural stepping-stone toward the analysis of data collected during future spaceborne lidar missions, such as NASA’s Atmosphere Observation System (AtmOS) mission currently scheduled for launch late in this decade. We will also investigate possible trends in PSC occurrence and composition over the entire CALIOP data record and through further comparisons with the Stratospheric Aerosol Measurement (SAM) II solar occultation PSC record from 1979-1989. Finally, we will validate the mountain-wave parameterization and PSC schemes used in the UM-UKCA (Unified Model coupled to the United Kingdom Chemistry and Aerosol module) chemistry-climate model through detailed comparisons with earlier CALIOP PSC data products and those developed under this proposal.
CALIPSO↗
Improved Characterization of PSC Processes Derived from a Third-Generation CALIOP and MLS Detection and Composition Classification Algorithm
The new 3-year CloudSat and CALIPSO Science Team project described in this poster will use a unique combination of data from the Cloud-Aerosol LIdar with Orthogonal Polarization (CALIOP) instrument on CALIPSO and the Microwave Limb Sounder (MLS) on Aura, in conjunction with supporting meteorological information and detailed modeling studies, to advance our understanding of polar stratospheric cloud (PSC) processes and their role in ozone depletion. We will develop a third-generation (Gen3) PSC detection and composition algorithm that incorporates a new, more robust two-dimensional, multi-channel CALIOP feature detection scheme (2D-McDA). We will also devise and implement an improved two-dimensional PSC composition classification scheme that utilizes multiple parameters (e.g., CALIOP 532-nm parallel and perpendicular scattering ratios, CALIOP 1064-nm total scattering ratio, MLS HNO3 and H2O, ambient temperature, and temperature histories) in a Bayesian approach to determine the most likely PSC composition and help constrain solid PSC particle number density and size/shape. The combined CALIOP/MLS analyses will allow us to study in detail the full life cycle of PSCs and their resulting impact on gas-phase HNO3 and H2O, which should lead to improved parameterizations of PSC microphysics in global chemistry-climate models (CCMs) where detailed particle information is not available. The Gen3 CALIOP PSC algorithm will be a natural stepping-stone toward the analysis of data collected during future spaceborne lidar missions, such as NASA’s Atmosphere Observation System (AOS) mission currently scheduled for launch late in this decade. We will also investigate possible trends in PSC occurrence and composition over the entire CALIOP data record and through further comparisons with the Stratospheric Aerosol Measurement (SAM) II solar occultation PSC record from 1979-1989. Finally, we will validate the mountain-wave parameterization and PSC schemes used in the UM-UKCA (Unified Model coupled to the United Kingdom Chemistry and Aerosol module) CCM through detailed comparisons with earlier CALIOP PSC data products and those developed under this proposal.
CALIPSO↗
Designing Lightweight Neutron Absorbing Composites Using a Comprehensive Absorber Areal Density Metric
Efforts to lightweight neutron absorbing composites are limited by incomplete understandings of the interaction between absorbing particles and their matrices. In this study, analytical models and a more physically representative simulation evaluated the penalty to neutron absorbing performance due to neutron channeling between large absorbing particles. Models and simulation agreed that B 4 C particles smaller than 100μm and especially those smaller than 10μm did not cause excessive neutron channeling. A more comprehensive neutron absorbing composite design metric – boron-10 equivalent areal density, which considers the particle size penalty and the matrix contribution to absorptivity – was introduced and used to estimate lightweighting via matrix substitution. Calculations using this new metric showed that a non-absorbing Mg matrix reduced mass by up to 35% over Al, constrained by the difference in mass density, while an absorbing Mg–Li matrix reduced mass by up to 60%, exceeding the difference in mass densities alone. Measurement of apparent absorber areal density through two experimental techniques – foil activation and direct counting – validated estimated absorber areal density as a neutron absorbing composite design metric. This updated understanding of the particle size penalty, newly introduced design metric, and experimental validation demonstrate a path to lightweight neutron absorbing composites.
Radiation shielding↗