Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wide-angle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Nighttime Convection in Water-ice Clouds at High Northern Latitudes on Mars

We investigate water-ice clouds and their influence on the temperature structure of the Mar-tian atmosphere at high northern latitudes in early summer. New results are obtained throughcoordinated analysis of two types of data from Mars Global Surveyor: atmospheric profiles re-trieved from radio occultation (RO) measurements and wide-angle images from the Mars OrbiterCamera (MOC). Some RO profiles contain a layer of neutral static stability, which indicates thepresence of convective mixing at a local time (about 5 h) when it does not usually occur. Thesenocturnal mixed layers (NMLs) were observed frequently in early summer of Mars year 27 atlatitudes of 53–72◦N and longitudes of 210–330◦E. The base of a typical NML is 3 km abovethe surface, about the same height as the nighttime cloud layer detected by the Phoenix LIDARin early summer of Mars year 29 at 234◦E, 68◦N. The depth of the NMLs ranges from less than1 km to more than 5 km. Comparisons with nearly simultaneous MOC images demonstrate thatNMLs are closely associated with water-ice clouds. There is a dense cluster of NMLs within theannular cloud that appears every year in early summer between Alba Mons and the north polarresidual ice cap. The lighting conditions at this location and season allowed MOC to observe theannular cloud on most orbits, at 118-min intervals. Its appearance varies dramatically with localtime, becoming more symmetrical and better organized at night and dissipating to a crescentshape during the day. According to high-resolution numerical simulations (Spiga et al., 2017),including a large-eddy simulation at the Phoenix landing site, NMLs form when radiative cool-ing by water-ice aerosols causes convective instability; the mixed layer is forced from above bynegative buoyancy. Our results strongly support this conclusion. In addition, MOC images frommidsummer contain eastward-moving frontal clouds. Temperature profiles within these cloudsshow signs of near-surface advection of warm air, which reduces the static stability of the loweratmosphere and contributes, along with cloud radiation, to the formation of an NML.

David Hinson↗

Terrestrial Exospheric Dayside H-density Profile at 3 - 15 RE from UVIS/HDAC and TWINS Lyman-alpha Data Combined

Terrestrial ecliptic dayside observations of the exospheric Lyman-α column intensity between 3–15 Earth radii (RE) by UVIS/HDAC (UVIS – ultraviolet imaging spectrograph; HDAC – hydrogen-deuterium absorption cell) Lyman-α photometer at CASSINI have been analyzed to derive the neutral exospheric H-density profile at the Earth’s ecliptic dayside in this radial range. The data were measured during CASSINI’s swing-by maneuver at the Earth on 18 August 1999 and are published by Werner et al. (2004). In this study the dayside HDAC Lyman-α observations published by Werner et al. (2004) are compared to calculated Lyman-α intensities based on the 3D H-density model derived from TWINS (Two Wide-angle Imaging Neutral-atom Spectrometers) Lyman-α observations between 2008–2010 (Zoennchen et al., 2015). It was found that both Lyman-α profiles show a very similar radial dependence in particular between 3–8RE. Between 3.0–5.5RE impact distance Lyman-α observations of both TWINS and UVIS/HDAC exist at the ecliptic dayside. In this overlapping region the cross-calibration of the HDAC profile against the calculated TWINS profile was done, assuming that the exosphere there was similar for both due to comparable space weather conditions. As a result of the cross-calibration the conversion factor between counts per second and rayleigh, fc = 3.285 counts s−1R−1, is determined for these HDAC observations. Using this factor, the radial H-density profile for the Earth’s ecliptic dayside was derived from the UVIS/HDAC observations, which constrained the neutral H density there at 10RE to a value of 35 cm-3. Furthermore, a faster radial H-density decrease was found at distances above 8RE (≈r−2.37) compared to the lower distances of 3–7RE (≈r−2.37). This increased loss of neutral H above 8RE might indicate a higher rate of H ionization in the vicinity of the magnetopause at 9–11RE (near subsolar point) and beyond, because of increasing charge exchange interactions of exospheric H atoms with solar wind ions outside the magnetosphere.

Jochen H Zoennchen↗

Mapping Albedo Variations to Constrain the History of the Didymos System From Dart and Liciacube Observations

The Double Asteroid Redirection Test (DART) relied on its high-resolution, broad-band camera DRACO to successfully execute its impact experiment on September 26, 2022. While targeting Dimorphos, the ~150 m diameter moon of the Didymos binary asteroid system, DART also imaged the ~760 m diameter primary. LICIACube, a ride-along CubeSat released from DART prior to impact, carried two cameras, LEIA and LUKE, pan and wide-angle RGB color cameras, respectively, to witness the impact and also image both bodies. In addition to critical data that enabled and observed the impact, these cameras provided the highest spatial resolution data of any binary asteroid system and the first for near-Earth asteroids. Mapping and comparing albedo units on both the primary and secondary and placing them in the context of other S-type asteroids will help constrain the physical relationships and prior interactions between the two bodies and thus reveal the formational and evolutionary history of the Didymos system.

J. M. Sunshine↗

Effect of silica nanoparticles on morphology of segmented polyurethanes

Two series of segmented polyurethanes having soft segment concentration of 50 and 70 wt%, and different concentrations of nanometer-diameter silica were prepared and tested. Atomic force microscopy revealed a strong effect of nanoparticles on the large-scale spherulitic morphology of the hard domains. Addition of silica suppresses fibril formation in spherulites. Filler particles were evenly distributed in the hard and soft phase. Nano-silica affected the melting point of the hard phase only at loadings >30 wt% silica. A single melting peak was observed at higher filler loadings. There is no clear effect of the filler on the glass transition of soft segments. Wide-angle X-ray diffraction showed decreasing crystallinity of the hard domains with increasing filler concentration in samples with 70 wt% soft segment. Ultra small-angle X-ray scattering confirms the existence of nanometer phase-separated domains in the unfilled sample. These domains are disrupted in the presence of nano-silica. The picture that emerges is that nano-silica suppresses short-scale phase separation of the hard and soft segments. Undoubtedly, the formation of fibrils on larger scales is related to short-scale segment segregation, so when the latter is suppressed by the presence of silica, fibril growth is also impeded.

36 MATERIALS SCIENCE↗

High-Energy X-ray Studies of Real Materials Under Real Conditions and in Real Time

High-energy x-rays from 3rd generation synchrotron sources, including the APS, possess a unique combination of high penetration power and high spatial, reciprocal space, and temporal resolution. These characteristics can be exploited to non-destructively measure phase, texture and strain distributions under extreme environments including thermo-mechanical loading, high-pressure, irradiation and supercritical environments. Over the past several years, the 1-ID beamline has developed a number of programs for these purposes, namely (i) high-energy diffraction microscopy, in which grain and sub-grain volumes are mapped in polycrystalline aggregates, and (ii) combined small-and wide-angle x-ray scattering which permits information over a broad range of length scales to be collected from the same (micron-level) volume. These programs have been increasingly used to test and extend predictive simulations of materials behavior over size scales ranging from nm to mm. Select studies will be presented including nucleation and growth of nanomaterials, void and structural evolution in complex composites under thermo-mechanical and irradiated environments, and microstructural changes in layered systems including thermal-barrier coatings, batteries and fuel cells. Finally, extension of these programs, through the planned APS upgrade, to higher spatio-temporal resolution will be described.

36 MATERIALS SCIENCE↗

Role of Conformation in - Interactions and Polymer/Fullerene Miscibility

The origin of the miscibility between C60 fullerene and a series of phenylic vinyl polymers has been investigate using a combination of wide-angle x-ray (WAXS) and neutron (WANS) scattering and density functional theory (DFT) computational modeling. The solubility limit of the C60 in the polymers was found to increase non-linearly with increasing phenylic groups in the side-chain from 1 wt% in polystyrene (PS) to 12 wt% in poly(9-vinyl phenanthrene) (P9VPh). The DFT calculations showed that the polymer interacts with the fullerene preferentially with the phenylic groups in these vinyl polymers. However, due to the backbone these phenyl groups are unable to form the energetically favorable T-junction or planar - stacks with the fullerene, and are randomly oriented to the cage. The non-linear increase in solubility is believed to be associated with shape conformity of the three ring phenanthrene to the curvature of the fullerene.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Parametrization and Classification of 20 Billion LSST Objects: Lessons from SDSS

The Large Synoptic Survey Telescope (LSST) will be a large, wide-field ground-based system designed to obtain, starting in 2015, multiple images of the sky that is visible from Cerro Pachon in Northern Chile. About 90% of the observing time will be devoted to a deep-wide-fast survey mode which will observe a 20,000 deg{sup 2} region about 1000 times during the anticipated 10 years of operations (distributed over six bands, ugrizy). Each 30-second long visit will deliver 5{sigma} depth for point sources of r {approx} 24.5 on average. The co-added map will be about 3 magnitudes deeper, and will include 10 billion galaxies and a similar number of stars. We discuss various measurements that will be automatically performed for these 20 billion sources, and how they can be used for classification and determination of source physical and other properties. We provide a few classification examples based on SDSS data, such as color classification of stars, color-spatial proximity search for wide-angle binary stars, orbital-color classification of asteroid families, and the recognition of main Galaxy components based on the distribution of stars in the position-metallicity-kinematics space. Guided by these examples, we anticipate that two grand classification challenges for LSST will be (1) rapid and robust classification of sources detected in difference images, and (2) simultaneous treatment of diverse astrometric and photometric time series measurements for an unprecedentedly large number of objects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Wide-Field Astronomical Surveys in the Next Decade

Wide-angle surveys have been an engine for new discoveries throughout the modern history of astronomy, and have been among the most highly cited and scientifically productive observing facilities in recent years. This trend is likely to continue over the next decade, as many of the most important questions in astrophysics are best tackled with massive surveys, often in synergy with each other and in tandem with the more traditional observatories. We argue that these surveys are most productive and have the greatest impact when the data from the surveys are made public in a timely manner. The rise of the 'survey astronomer' is a substantial change in the demographics of our field; one of the most important challenges of the next decade is to find ways to recognize the intellectual contributions of those who work on the infrastructure of surveys (hardware, software, survey planning and operations, and databases/data distribution), and to make career paths to allow them to thrive.

79 ASTRONOMY AND ASTROPHYSICS↗

Reconstruction of nonlinear wave propagation

Disclosed are systems and methods for characterizing a nonlinear propagation environment by numerically propagating a measured output waveform resulting from a known input waveform. The numerical propagation reconstructs the input waveform, and in the process, the nonlinear environment is characterized. In certain embodiments, knowledge of the characterized nonlinear environment facilitates determination of an unknown input based on a measured output. Similarly, knowledge of the characterized nonlinear environment also facilitates formation of a desired output based on a configurable input. In both situations, the input thus characterized and the output thus obtained include features that would normally be lost in linear propagations. Such features can include evanescent waves and peripheral waves, such that an image thus obtained are inherently wide-angle, farfield form of microscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photovoltaic generator with a spherical imaging lens for use with a paraboloidal solar reflector

The invention is a generator for photovoltaic conversion of concentrated sunlight into electricity. A generator according to the invention incorporates a plurality of photovoltaic cells and is intended for operation near the focus of a large paraboloidal reflector pointed at the sun. Within the generator, the entering concentrated light is relayed by secondary optics to the cells arranged in a compact, concave array. The light is delivered to the cells at high concentration, consistent with high photovoltaic conversion efficiency and low cell cost per unit power output. Light enters the generator, preferably first through a sealing window, and passes through a field lens, preferably in the form of a full sphere or ball lens centered on the paraboloid focus. This lens forms a concentric, concave and wide-angle image of the primary reflector, where the intensity of the concentrated light is stabilized against changes in the position of concentrated light entering the generator. Receiving the stabilized light are flat photovoltaic cells made in different shapes and sizes and configured in a concave array corresponding to the concave image of a given primary reflector. Photovoltaic cells in a generator are also sized and interconnected so as to provide a single electrical output that remains high and stable, despite aberrations in the light delivered to the generator caused by, for example, mispointing or bending of the primary reflector. In some embodiments, the cells are set back from the image formed by the ball lens, and part of the light is reflected onto each cell small secondary reflectors in the form of mirrors set around its perimeter.

14 SOLAR ENERGY↗

Technical Report: Understanding Functional Lyotropic Liquid Crystal Network Phase Self-Assembly and the Properties of Nanoconfined Water

Through the synergistic interplay of molecular dynamics (MD) simulations, chemical synthesis, and materials characterization by X-ray and neutron scattering techniques, this project investigated the phase behaviors of new classes of aqueous lyotropic liquid crystals (LLCs) and the properties of water nanoconfined within their pores. A portion of our studies focused on the synthesis of new classes of alkylsulfonic acid and alkylphosphonate amphiphiles, which were shown to undergo water-induced self-assembly to form a wide variety of nanostructured morphologies with unusually high degrees of long-range translational order observed by small- angle X-ray scattering (SAXS). Sample LLC morphologies that were observed include the lamellar (L!), tricontinuous double gyroid (G), hexagonally-packed cylinders (H), and low symmetry discontinuous micellar (I) Frank-Kasper phases. Since the G and H phases are the most promising for the development of selective ion transporting membranes for energy applications, we sought the characterize the structure and dynamics of water confined within the sub-3 nm pores of these LLCs using wide-angle neutron diffraction (WAND) and quasielastic neutron scattering (QENS) experiments performed at the Spallation Neutron Source at Oak Ridge National Laboratory. Using molecular dynamics (MD) simulations, we validated models for analyzing this QENS data to obtain water self-diffusion coefficients in LLC G and H phases of carboxylate and sulfonate surfactant LLCs as a function of the identities of their charge compensating counterions.

07 ISOTOPE AND RADIATION SOURCES↗

Stereo-Optic High Definition Imaging: A New Technology to Understand Bird and Bat Avoidance of Wind Turbines

There is a critical need to develop monitoring tools to track aerofauna (birds and bats) in three dimensions around wind turbines. New monitoring systems will reduce permitting uncertainty by increasing the understanding of how birds and bats are interacting with wind turbines, which will improve the accuracy of impact predictions. Biodiversity Research Institute (BRI), The University of Maine Orono School of Computing and Information Science (UMaine SCIS), HiDef Aerial Surveying Limited (HiDef), and SunEdison, Inc. (formerly First Wind) responded to this need by using stereo-optic cameras with near-infrared (nIR) technology to investigate new methods for documenting aerofauna behavior around wind turbines. The stereo-optic camera system used two synchronized high-definition video cameras with fisheye lenses and processing software that detected moving objects, which could be identified in post-processing. The stereo- optic imaging system offered the ability to extract 3-D position information from pairs of images captured from different viewpoints. Fisheye lenses allowed for a greater field of view, but required more complex image rectification to contend with fisheye distortion. The ability to obtain 3-D positions provided crucial data on the trajectory (speed and direction) of a target, which, when the technology is fully developed, will provide data on how animals are responding to and interacting with wind turbines. This project was focused on testing the performance of the camera system, improving video review processing time, advancing the 3-D tracking technology, and moving the system from Technology Readiness Level 4 to 5. To achieve these objectives, we determined the size and distance at which aerofauna (particularly eagles) could be detected and identified, created efficient data management systems, improved the video post-processing viewer, and attempted refinement of 3-D modeling with respect to fisheye lenses. The 29-megapixel camera system successfully captured 16,173 five-minute video segments in the field. During nighttime field trials using nIR, we found that bat-sized objects could not be detected more than 60 m from the camera system. This led to a decision to focus research efforts exclusively on daytime monitoring and to redirect resources towards improving the video post- processing viewer. We redesigned the bird event post-processing viewer, which substantially decreased the review time necessary to detect and identify flying objects. During daytime field trials, we determine that eagles could be detected up to 500 m away using the fisheye wide-angle lenses, and eagle-sized targets could be identified to species within 350 m of the camera system. We used distance sampling survey methods to describe the probability of detecting and identifying eagles and other aerofauna as a function of distance from the system. The previously developed 3-D algorithm for object isolation and tracking was tested, but the image rectification (flattening) required to obtain accurate distance measurements with fish-eye lenses was determined to be insufficient for distant eagles. We used MATLAB and OpenCV to improve fisheye lens rectification towards the center of the image, but accurate measurements towards the image corners could not be achieved. We believe that changing the fisheye lens to rectilinear lens would greatly improve position estimation, but doing so would result in a decrease in viewing angle and depth of field. Finally, we generated simplified shape profiles of birds to look for similarities between unknown animals and known species. With further development, this method could provide a mechanism for filtering large numbers of shapes to reduce data storage and processing. These advancements further refined the camera system and brought this new technology closer to market. Once commercialized, the stereo-optic camera system technology could be used to: a) research how different species interact with wind turbines in order to refine collision risk models and inform mitigation solutions; and b) monitor aerofauna interactions with terrestrial and offshore wind farms replacing costly human observers and allowing for long-term monitoring in the offshore environment. The camera system will provide developers and regulators with data on the risk that wind turbines present to aerofauna, which will reduce uncertainty in the environmental permitting process.

Adams, Evan↗

In-Situ High Energy X-ray Characterization of Tensile Deformation of Advanced Austenitic Stainless Steels

A deep understanding of the deformation mechanisms for next-generation structural materials of advanced nuclear reactors is critical to their successful applications. For this purpose, high energy synchrotron X-ray characterization techniques in combination with in situ thermo-mechanical loading have distinctive advantages in correlating the mechanical responses of the specimens with their microstructure evolution in real time. In this study, this method is employed to compare the deformation characteristics of two advanced austenitic stainless steels, NF709 steel a High-Temperature Ultrafine-Precipitate Strengthened (HT-UPS) steel, with a traditional 316 austenitic stainless steel (SS). The NF709 and HT-UPS steels are both promising candidates for next generation nuclear energy systems. The NF709 is a 20Cr-25Ni austenitic stainless steel stabilized with Nb/Ti(C,N) precipitates and possesses excellent high temperature and corrosion resistance. The HT-UPS steel (Fe-14Cr-16Ni-Ti,Nb,V) also has much improved creep resistance and high temperature performance than 316SS through the careful control of minor alloying elements to form creep resistant precipitates. While both have shown improved mechanical properties over 316SS, their deformation characteristics and underlying mechanisms are yet to be fully explored. The recent applications of simultaneous Wide-Angle X-ray Scattering (WAXS) and Small-Angle X-ray Scattering (SAXS) techniques under thermo-mechanical loading of steel samples have revealed valuable insights of the microstructural evolution during deformation. This work is to apply these techniques to characterize the deformation behaviors and also understand their relationship with the microstructures of advanced austenitic stainless steels. (authors)

36 MATERIALS SCIENCE↗

Baryon–Antibaryon Photoproduction off the Proton

The GlueX Experiment at Jefferson Lab uses linearly polarized photon beam to study the photoproduction of light mesons and baryons off a proton target with unprecedented precision. We have observed p¯p photoproduction and, for the first time, ?¯? photoproduction from thresholds up to E = 11.6 GeV. We reproduce the observed kinematic distributions with a phenomenological model that includes t-channel Regge exchange and double Regge exchange. The model uses few parameters to match all the kinematic spectra via an optimization algorithm developed specifically for this purpose. We report the total cross sections of the two reactions, as well as differential cross sections with respect to various momentum transfers and invariant mass spectra of p¯p, ?¯?, p¯? systems which show enhancements right above production thresholds. Furthermore, the beam asymmetries of the p¯p system are extracted from the GlueX data to further probe the nature of the t-channel Regge exchanges. We also report preliminary measurements of the spin polarizations of the individual hyperons. No prominent resonance structure was found in these reaction channels, but the angular distributions and the correlation of longitudinal momenta indicate the existence of multiple production mechanisms. Besides a dominant forward peak in the polar angle of the baryon-antibaryon pair in t-channel production, we see wide-angle antibaryon distributions different from that of the baryon. In the hyperon channel, we see a clear separation between the photoproduction of the ?¯?, p¯? systems.

Li, Hao↗

Correlating inter-particle forces and particle shape to shear-induced aggregation/fragmentation and rheology for dilute anisotropic particle suspensions: A complementary study via capillary rheometry and in-situ small and ultra-small angle X-ray scattering

Predicting the stability of suspensions composed of anisotropic particles is difficult due to the complexity and interplay of hydrodynamic and colloidal forces. For example, it is not well understood how non-spherical particle shapes affect suspension-rheological responses. This study presents evidence showing how the stacking of boehmite platelets dispersed in aqueous solution leads to moderate shear thinning, even at low boehmite mass fractions. Wide angle X-ray, small angle X-ray, and ultra-small angle X-ray scattering were used to simultaneously monitor changes to the size and fractal dimensions of boehmite aggregates from 6 – 10,000 Å as the sample was recirculated through an in situ capillary rheometer. The latter also provided simultaneous measurements of the viscosity of the suspensions. Computational fluid dynamics modeling of the apparatus was used to provide a more rigorous analysis of the fluid flow. In addition to shear-induced aggregation/fragmentation correlated to a complicated balance between hydrodynamic and colloidal forces, the results indicate that orientationally-dependent interactions, arising from non-spherical boehmite aggregate sub-units, may explain the relatively large experimental viscosity when the hydrodynamic force is small compared to colloidal forces. Ultimately, the results from this study can provide a foundation for future work investigating particle shape effects on colloidal and hydrodynamics forces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Enhanced Ion Transport and Molecular Packing Stability in Asymmetric 2D Nanostructured π‐Conjugated Thieno[3,2‐b]Thiophene‐Based Liquid Crystal

Organic semiconductors based on liquid crystal (LC) molecules have attracted increasing interest. Here, in this work, two linear LCs based on 2,5‐bis(thien‐2‐yl)thieno[3,2‐b]thiophene (BTTT) mesogen are designed and synthesized, including BTTT/dEO3 with two symmetrically attached tri(ethylene oxide) groups and BTTT/mEO6 with one asymmetrically attached hexa(ethylene oxide) group. These two molecules have comparable functional‐group compositions but different molecular geometries, leading to their moderately different material performances. Both LCs show smectic mesophases with relatively low transition temperatures as confirmed by differential scanning calorimetry and polarized optical microscopy. A combination of experimental grazing incidence wide‐angle X‐ray scattering and molecular dynamics (MD) simulations reveals a herringbone packing motif of BTTT segments in both LCs while a smaller molecular tilt angle in BTTT/mEO6. Ionic conductivities are measured by doping LCs with different amounts of ionic dopants, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). BTTT/mEO6 shows better smectic phase stability to higher LiTFSI doping ratios. Both LCs exhibit similar ionic conductivities in the smectic phases, but BTTT/mEO6 outperforms BTTT/dEO3 by a factor of three in the amorphous phase at higher temperatures. MD simulations, performed to examine the ion solvation environment, reveal that BTTT/mEO6 is more efficient in coordinating Li‐ions and screening their interactions with TFSI‐ions which further promote ionic transport.

grazing incidence wide-angle X-ray scattering↗

Enhancing Crystallization in Hybrid Perovskite Solar Cells Using Thermally Conductive 2D Boron Nitride Nanosheet Additive

Controlling crystallization and grain growth is crucial for realizing highly efficient hybrid perovskite solar cells (PSCs). In this work, enhanced PSC photovoltaic performance and stability by accelerating perovskite crystallization and grain growth via 2D hexagonal boron nitride (hBN) nanosheet additives incorporated into the active perovskite layer are demonstrated. Specifically, in situ X-ray scattering and infrared thermal imaging during the perovskite annealing process revealed the highly thermally conductive hBN nanosheets promoted the phase conversion and grain growth in the perovskite layer by facilitating a more rapid and spatially uniform temperature rise within the perovskite film. Complementary structural, physicochemical, and electrical characterizations further showed that the hBN nanosheets formed a physical barrier at the perovskite grain boundaries and the interfaces with charge transport layers, passivating defects, and retarding ion migration. As a result, the power conversion efficiency of the PSC is improved from 17.4% to 19.8%, along with enhanced device stability, retaining ≈90% of the initial efficiency even after 500 h ambient air storage. Here, the results not only highlight 2D hBN as an effective additive for PSCs but also suggest enhanced thermal transport as one of the pathways for improved PSC performance by 2D material additives in general.

2D materials↗

Dynamic Structural Change of Plant Epidermal Cell Walls under Strain

Abstract The molecular foundations of epidermal cell wall mechanics are critical for understanding structure–function relationships of primary cell walls in plants and facilitating the design of bioinspired materials. To uncover the molecular mechanisms regulating the high extensibility and strength of the cell wall, the onion epidermal wall is stretched uniaxially to various strains and cell wall structures from mesoscale to atomic scale are characterized. Upon longitudinal stretching to high strain, epidermal walls contract in the transverse direction, resulting in a reduced area. Atomic force microscopy shows that cellulose microfibrils exhibit orientation‐dependent rearrangements at high strains: longitudinal microfibrils are straightened out and become highly ordered, while transverse microfibrils curve and kink. Small‐angle X‐ray scattering detects a 7.4 nm spacing aligned along the stretch direction at high strain, which is attributed to distances between individual cellulose microfibrils. Furthermore, wide‐angle X‐ray scattering reveals a widening of (004) lattice spacing and contraction of (200) lattice spacing in longitudinally aligned cellulose microfibrils at high strain, which implies longitudinal stretching of the cellulose crystal. These findings provide molecular insights into the ability of the wall to bear additional load after yielding: the aggregation of longitudinal microfibrils impedes sliding and enables further stretching of the cellulose to bear increased loads.

59 BASIC BIOLOGICAL SCIENCES↗