Millimeter-wavelengths propagation studies Semiannual status report
Multiple terminal facility for ATS-E millimeter wave propagation including weather station
Source record↗
SEARCH · Engineering Papers
Results for “wave propagation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Ultraviolet Radiation and Stratospheric Ozone
Ultraviolet radiation from the sun produces ozone in the stratosphere and it participates in the destruction of ozone. Absorption of solar ultraviolet radiation by ozone is the primary heating mechanism leading to the maximum in temperature at the stratopause. Variations of solar ultraviolet radiation on both the 27-day solar rotation period and the 11-year solar cycle affect ozone by several mechanisms. The temperature and ozone in the upper stratosphere respond to solar uv variations as a coupled system. An increase in uv leads to an increase in the production of ozone through the photolysis of molecular oxygen. An increase in uv leads to an increase in temperature through the heating by ozone photolysis. The increase in temperature leads to a partially-offsetting decrease in ozone through temperature-dependent reaction rate coefficients. The ozone variation modulates the heating by ozone photolysis. The increase in ozone at solar maximum enhances the uv heating. The processes are understood and supported by long-term data sets. Variation in the upper stratospheric temperatures will lead to a change in the behavior of waves propagating upward from the troposphere. Changes in the pattern of wave dissipation will lead to acceleration or deceleration of the mean flow and changes in the residual or transport circulation. This mechanism could lead to the propagation of the solar cycle uv variation from the upper stratosphere downward to the lower stratosphere. This process is not well-understood and has been the subject of an increasing number of model studies. I will review the data analyses for solar cycle and their comparison to model results.
Stolarski, R.↗
Breakdown of vertically propagating two-dimensional gravity waves forced by orography
The propagation of orographic gravity waves into an atmosphere with exponentially decreasing density is simulated with a two-dimensional, nonlinear, time-dependent numerical model. After the stationary wave is established over the mountain, the model predicts that wave breaking causes a large reduction of the vertical momentum flux in the flow, not only at levels where wave breaking is present, but also far below the lowest occurrence of overturning. More than half of the decrease in momentum flux is explained by the presence of large amplitude, downward propagating waves, which are generated in regions of wave breaking. The downward propagating waves appear almost simultaneously with overturning, and have nonzero phase speeds, suggesting a strongly nonlinear generation mechanism that depends on local wave properties. The generation of these downward propagating waves is a robust process, insensitive to mountain height, mountain width, or density scale height. These results have important implications for observational studies of orographically generated waves as well as for schemes that seek to parameterize the effects of orogoraphy in large-scale models.
Bacmeister, Julio T.↗
Resonance excitation of spiral density waves in a gaseous disk. I - A linear theory
The wave propagation in a gaseous disk which is self-gravitating and viscous is studied. Waves are generated by an external disturbance and are maintained in motion among forces due to rotation, self-gravity, and pressure. A linear theory is developed for the general case in which all factors are taken into account. The general solution can be applied to the photostellar disk of the solar nebula and the circumstellar disk of a binary in which the effects of self-gravity and pressure are equally important. The theory confirms in great detail that a long wave is excited at one of the Lindblad resonances gravitationally by the external periodic potential, propagates toward the corotation, is reflected before reaching there at the Q-barrier, and finally propagates in the reverse direction toward and past the Lindblad resonance as a short wave.
Yuan, Chi↗
Comparison of weakly and strongly nonlinear wave evolution in a dispersive plasma
An investigation of the evolution of strongly nonlinear, low frequency (ion gyrofrequency), parallel propagating wave packets in a dispersive, collisionless, and low beta(= 8piP/B-squared = 0.3) plasma is undertaken using a hybrid numerical code. These strongly nonlinear wave packets have a transverse magnetic field strength, or wave amplitude, which is of order or greater the field strength along the direction of propagation, and their evolution can differ qualitatively from that of weakly nonlinear packets. The development of spreading fast wave (right helicity) and rarefraction regions competes strongly with steepening, and leads to a long time waveform which differs greatly from that for weak nonlinearity. Results are used to suggest that strongly nonlinear wave evolution occurs frequently in the earth's foreshock.
Vasquez, Bernard J.↗
Direct Imaging of Magnetohydrodynamic Wave Mode Conversion Near A 3D Null Point on the Sun
Mutual conversion of various kinds of magnetohydrodynamic (MHD) waves can have profound impacts on wave propagation, energy transfer, and heating of the solar chromosphere and corona. Mode conversion occurs when an MHD wave travels through a region where the Alfvén and sound speeds are equal (e.g., a 3D magnetic null point). Here we report the direct extreme ultraviolet (EUV) imaging of mode conversion from a fast-mode to a slow-mode MHD wave near a 3D null point using Solar Dynamics Observatory/Atmospheric Imaging Assembly (SDO/AIA) observations. An incident fast EUV wavefront associated with an adjacent eruptive flare propagates laterally through a neighboring pseudostreamer. Shortly after the passage of the fast EUV wave through the null point, a slow-mode wave appears near the null that propagates upward along the open structures and simultaneously downward along the separatrix encompassing the fan loops of the pseudostreamer base. These observations suggest the existence of mode conversion near 3D nulls in the solar corona, as predicted by theory and MHD simulations. Moreover, we observe decaying transverse oscillations in both the open and closed structures of the pseudostreamer, along with quasiperiodic type III radio bursts indicative of repetitive episodes of electron acceleration.
Pankaj Kumar↗
Internal gravity waves in the solar atmosphere. I - Adiabatic waves in the chromosphere
The properties of adiabatic and linear internal gravity waves propagating in a solar wind model are discussed, using nonlinearity criteria unique to gravity waves to estimate wave-breaking heights. The results are used to deduce information on the possible role of gravity waves in the chromospheric energy balance. Maximum vertical velocity amplitudes for gravity waves are estimated to be on the order of 2 km/sec or less, and maximum horizontal velocity amplitudes are less than 6 km/sec, with temperature perturbations as large as 1000-2000 K. It is also estimated that gravity waves with an incident energy flux of one million ergs/sq cm-sec can propagate upward to a maximum height of 900-1000 km above the visible surface before nonlinearities lead to wave breaking, while those with an energy flux of 100,000 ergs/sq cm-sec can reach maximum heights of 1400-1600 km.
Mihalas, B. W.↗
Computational Assessment of the Impact of Wave Count on Rotating Detonation Engine Performance
The impact of the number of azimuthally propagating waves on the performance of a Rotating Detonation Engine (RDE) is investigated using a simplified two-dimensional computational fluid dynamic simulation. The basic RDE configuration examined has no exit throat. The inlet is assumed lossless and does not allow backflow. The adiabatic, inviscid, and premixed simulation utilizes a particularly simple finite rate reaction mechanism that allows user control over the relative amounts of deflagration and detonation that occur, the presence and extent of a reaction delay associated with fuel and oxidizer mixing, and the number of waves present in the domain. The simplifications and idealizations decouple the effect of wave count from other potential loss mechanisms. Performance is measured using exhaust flow total pressure gain relative to the inlet total pressure. One, two, and three wave solutions are computed under identical boundary conditions and grid resolution. For simulations with no mixing delay and minimal deflagration, the number of waves present has negligible impact on performance. With a mixing delay, performance decreases with increasing wave number. With increased deflagration, performance increases with increasing wave number. With both effects simulated it is found that the two wave solution performs better than either the one or three wave solutions. The causes of these trends are explored. They imply that for practical, RDE’s, the number of waves that are present can impact performance.
Detonation↗
Computational Assessment of the Impact of Wave Count on Rotating Detonation Engine Performance
The impact of the number of azimuthally propagating waves on the performance of a Rotating Detonation Engine (RDE) is investigated using a simplified two-dimensional computational fluid dynamic simulation. The basic RDE configuration examined has no exit throat. The inlet is assumed lossless and does not allow backflow. The adiabatic, inviscid, and premixed simulation utilizes a particularly simple finite rate reaction mechanism that allows user control over the relative amounts of deflagration and detonation that occur, the presence and extent of a reaction delay associated with fuel and oxidizer mixing, and the number of waves present in the domain. The simplifications and idealizations decouple the effect of wave count from other potential loss mechanisms. Performance is measured using exhaust flow total pressure gain relative to the inlet total pressure. One, two, and three wave solutions are computed under identical boundary conditions and grid resolution. For simulations with no mixing delay and minimal deflagration, the number of waves present has negligible impact on performance. With a mixing delay, performance decreases with increasing wave number. With increased deflagration, performance increases with increasing wave number. With both effects simulated it is found that the two wave solution performs better than either the one or three wave solutions. The causes of these trends are explored. They imply that for practical, RDE’s, the number of waves that are present can impact performance.
Detonation↗
Measurement of the vibration of structures with a three-component vibration sensor
The effects of transverse waves and longitudinal displacements on transverse displacements in a plate are studied using a three component vibration sensor. Limitations of using the sensor in such measurements are: (1) sensor connection to the plate leads to changes in transverse displacement points on the plate surface, (2) the sensor has a finite magnitude of selectivity with respect to vibrations in the direction of the different channel axes, (3) longitudinal displacements of plate surface create restrictions on relative sensitivity of sensor to longitudinal-transverse waves, and (4) tranverse displacement of plate surface during longitudinal wave propagation also creates a restriction on sensor sensitivity to transverse waves.
Yeskov, V. V.↗
Waves in active and passive periodic structures - A review
The theory and recent applications of waves in periodic structures are reviewed. Both the Floquet and coupled waves approach are analyzed in some detail. The theoretical part of the paper includes wave propagation in unbounded and bounded active or passive periodic media, wave scattering from periodic boundaries, source radiation (dipole, Cerenkov, transition, and Smith-Purcell) in periodic media, and pulse transmission through a periodic slab. The applications part covers the recent development in a variety of fields: distributed feedback oscillators, filters, mode converters, couplers, second-harmonic generators, deflectors, modulators, and transducers in the fields of integrated optics and integrated surface acoustics. Work on insect compound eyes, mechanical structures, ocean waves, pulse compressions, temperature waves, and cholesteric liquid crystals, and particles interaction with crystals is briefly reviewed, especially in the case of zeolite crystals and superlattices. Recent advances in fabrication techniques for very fine gratings are also covered.
Elachi, C.↗
Kristian Birkeland - The man and the scientist
A review is presented of Birkeland's outstanding contributions to auroral theory and, in particular, to the foundation of modern magnetospheric physics. Birkeland's first years in research, after a study of mathematics and theoretical physics at the university, were concerned with Maxwell's theory, the investigation of electromagnetic waves in conductors, wave propagation in space, an energy transfer by means of electromagnetic waves, and a general expression for the Poynting vector. Experiments with cathode rays near a magnet in 1895, led Birkeland to the development of an auroral theory. This theory represented the first detailed, realistic explanation of the creation of an aurora. Attention is given to experiments conducted to verify the theory, the discovery of the polar elementary storm, and the deduction of auroral electric currents. Birkeland's background and education is also considered along with his personality.
Egeland, A.↗
Simulation of the thermospheric tides by use of the NCAR thermospheric general circulation model
Numerical calculations of the thermospheric tidal winds and temperatures at equinox are presented. The calculations were made using the National Center for Atmospheric Research Thermospheric General Circulation Model (TGCM), which includes the effects of viscosity, conductivity, diffusion, ion drag, winds, and temperature gradients. The thermospheric diurnal and semidiurnal tides are excited in situ by solar heating and by ion-neutral momentum coupling. The semidiurnal tidal calculations also include the effects of upward propagating waves generated by heating in the lower atmosphere. This semidiurnal propagating component is modeled by use of the classical tidal perturbations as lower boundary conditions. The model is tuned by adjusting the propagating tidal forcing term until calculated semidiurnal wind and temperature fields best approximate incoherent scatter observations. The tidal TGCM results are consistent with previous theoretical work and successfully reproduce high altitude temperature and meridional velocity data, but they give significantly lower magnitudes for velocities and temperatures near 160 km than are seen by observations.
Fensen, C. G.↗
Attenuation of intense sinusoidal waves in air-saturated, bulk porous materials
As intense, initially sinusoidal waves propagate in fluids, shocks form and excess attenuation of the wave occurs. Data are presented indicating that shock formation is not necessary for the occurrence of excess attenuation in nonlinear, lossy media, i.e., air-saturated, porous materials. An empirical equation is used to describe the excess attenuation of intense sinusoids in porous materials. The acoustic nonlinearity of and the excess attenuation in porous materials may be predicted directly from dc flow resistivity data. An empirical relationship is used to relate an acoustic nonlinearity parameter to the fundamental frequency and relative dc nonlinearity of two structurally different materials.
Kuntz, Herbert L.↗
Self-modulational formation of pulsar microstructures
A nonlinear plasma theory for self modulation of pulsar radio pulses is discussed. A nonlinear Schroedinger equation is derived for strong electromagnetic waves propagating in an electron positron plasma. The nonlinearities arising from wave intensity induced particle mass variation may excite the modulational instability of circularly and linearly polarized pulsar radiation. The resulting wave envelopes can take the form of periodic wave trains or solitons. These nonlinear stationary waveforms may account for the formation of pulsar microstructures.
Chian, A. C.-L.↗
An algorithm for solving the perturbed gas dynamic equations
The present application of a compact, higher-order central-difference approximation to the linearized Euler equations illustrates the multimodal character of these equations by means of computations for acoustic, vortical, and entropy waves. Such dissipationless central-difference methods are shown to propagate waves exhibiting excellent phase and amplitude resolution on the basis of relatively large time-steps; they can be applied to wave problems governed by systems of first-order partial differential equations.
Davis, Sanford↗
GASCan 2 payload integration
This project, conducted in cooperation with the NASA Advanced Space Design Program, is part of an ongoing effort to place an experiment package into space. The goal of this project is to build and test flight-ready hardware that can be launched from the Space Shuttle. Get Away Special Canister 2 (GASCan 2) consists of three separate experiments. The Ionospheric Properties and Propagation Experiment (IPPE) determines effects of the ionosphere on radio wave propagation. The Microgravity Ignition experiment (MGI) tests the effects of combustion in a microgravity environment. The Rotational Fluid Flow experiment (RFF) examines fluid behavior under varying levels of gravity. This year the following tasks were completed: design of the IPPE antenna, X- and J-cell battery boxes, J-cell battery box enclosure, and structural bumpers; construction of the MGI canisters, MGI mounting brackets, IPPE antenna, and battery boxes; and the selection of the RFF's operating fluid and the analysis of the fluid behavior under microgravity test conditions.
Cody, Dennis J.↗
Nonlinear Ultrasonic Characterization of Fatigue Microstructures
Dislocation dipole substructures formed during metal fatigue are shown to produce a substantial distortion of ultrasonic waves propagating through the fatigued material. A model of ultrasonic wave-dislocation dipole interactions is developed that quantifies the wave distortion by means of a material nonlinearity parameter (beta). Application of the model to AA2024-T4 predicts a value of p approximately 300% larger in material cyclically loaded for 100 kcycles in stress-control at 276 MPa and R=0 than that measured for virgin material. Experimental measurements show a monotonic increase in p as a function of the number of fatigue cycles that closely approaches the predicted increase. The experiments also suggest that the relevant dislocation substructures are localized in the material.
Cantrell, John H.↗