Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “value stacking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

A MULTI-WAVELENGTH VIEW OF THE STAR FORMATION ACTIVITY AT z {approx} 3

We present a multi-wavelength, UV-to-radio analysis for a sample of massive (M{sub *} {approx} 10{sup 10} M{sub sun}) IRAC- and MIPS 24 {mu}m detected Lyman break galaxies (LBGs) with spectroscopic redshifts z {approx} 3 in the GOODS-North field. For LBGs without individual 24 {mu}m detections, we employ stacking techniques at 24 {mu}m, 1.1 mm, and 1.4 GHz to construct the average UV-to-radio spectral energy distribution and find it to be consistent with that of a luminous infrared galaxy with L{sub IR} = 4.5{sup +1.1}{sub -2.3} x 10{sup 11} L{sub sun} and a specific star formation rate of 4.3 Gyr{sup -1} that corresponds to a mass doubling time {approx}230 Myr. On the other hand, when considering the 24 {mu}m detected LBGs we find among them galaxies with L{sub IR}>10{sup 12} L{sub sun}, indicating that the space density of z {approx} 3 UV-selected ultra-luminous infrared galaxies (ULIRGs) is {approx}(1.5 {+-} 0.5) x 10{sup -5} Mpc{sup -3}. We compare measurements of star formation rates from data at different wavelengths and find that there is tight correlation (Kendall's {tau}>99.7%) and excellent agreement between the values derived from dust-corrected UV, mid-IR, millimeter, and radio data for the whole range of L{sub IR} up to L{sub IR} {approx} 10{sup 13} L{sub sun}. This range is greater than that for which the correlation is known to hold at z {approx} 2, possibly due to the lack of significant contribution from polycyclic aromatic hydrocarbons to the 24 {mu}m flux at z {approx} 3. The fact that this agreement is observed for galaxies with L{sub IR}>10{sup 12} L{sub sun} suggests that star formation in UV-selected ULIRGs, as well as the bulk of star formation activity at this redshift, is not embedded in optically thick regions as seen in local ULIRGs and submillimeter-selected galaxies at z = 2.

79 ASTRONOMY AND ASTROPHYSICS↗

Radiochemical study of the kinematics of multi-nucleon transfer reactions in 48 Ca + 248 Cm collisions 10% above the Coulomb barrier

In this paper, the kinematics of multi-nucleon transfer reactions in 48 Ca + 248 Cm collisions at 262 MeV (center of target) was investigated by using a stacked-foil technique and radiochemical separations of trans-curium elements. Trans-curium isotopes were identified by α-particle spectroscopy. For Fm isotopes, by comparing the centroids of the measured post-neutron emission isotope distributions with the most probable primary mass number predicted by Volkov's generalized Q g g systematics, the missing mass (number of evaporated neutrons) is estimated. The latter is compared with that deduced from the measured centroid of the laboratory angular distribution peaked closely to the grazing angle and the centroid of the range distribution, being used to determine the average total kinetic energy loss (TKEL) and the average excitation energy. The latter agrees within the uncertainties with the missing mass so that a consistent picture of the reaction mechanism emerges. For products closer to the target Z, e.g., Cf and Bk, the distributions of kinetic energies are much broader than for Fm, reflecting the fact that in the former, values of TKEL reach from quasi-elastic scattering all the way to deep inelastic scattering. Finally, the measured laboratory angular distribution and the average laboratory kinetic energy of the Fm isotopes, being the prototypes for multi-nucleon transfer products, are benchmark values for the design of electromagnetic separators to be constructed for the separation and detection of unknown neutron-rich transactinides produced in this nuclear reaction type.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Fragmentation of 200 and 244 MeV/u Carbon Beams in Thick Tissue-Like Absorbers

Stacks consisting of thin CR-39 sheets sandwiched between thick Lucite and water absorbers were perpendicularly bombarded by C-12 ions at 200 and 244 MeV/u. Track radius distributions representing the charge composition of the fragmented beams were automatically measured by a particle track analysis system. After analysis of the nuclear charge distributions, the total charge removal cross sections and elemental production cross sections of fragments with atomic numbers from 5 to 3, were obtained down to the lower energies (approximately 50 and 100 MeV/u, respectively). It has been found that the measured total charge removal cross section agrees with theoretical predictions within approximately 10% and very well with previous experiments in corresponding energy regions. Two model calculations for production of B fragment are in good agreement with our measured data while a third model overestimates it by approximately 12%. Theoretical cross sections for Be and Li fragments differ strongly among the different models and from measured values.

Golovchenko, A. N.↗

Eastern Kodak Company

Lighting consumes more than 20% of electricity generated in the United States. Solid state lighting relies upon either inorganic or organic light-emitting diodes (OLEDs). OLED devices because of their thinness, fast response, excellent color, and efficiency could become the technology of choice for future lighting applications, provided progress is made to increase power efficiency and device lifetime and to develop cost-effective manufacturing processes. As a first step in this process, Eastman Kodak Company has demonstrated an OLED device architecture having an efficacy over 50 lm/W that exceeds the specifications of DOE Energy Star Program Requirements for Solid State Lighting. The project included work designed to optimize an OLED device, based on a stacked-OLED structure, with performance parameters of: low voltage; improved light extraction efficiency; improved internal quantum efficiency; and acceptable lifetime. The stated goal for the end of the project was delivery of an OLED device architecture, suitable for development into successful commercial products, having over 50 lum/W power efficiency and 10,000 hours lifetime at 1000 cd/m{sup 2}. During the project, Kodak developed and tested a tandem hybrid IES device made with a fluorescent blue emitter, a phosphorescent yellow emitter, and a phosphorescent red emitter in a stacked structure. The challenge was to find low voltage materials that do not absorb excessive amounts of emitted light when the extraction enhancement structure is applied. Because an extraction enhancement structure forces the emitted light to travel several times through the OLED layers before it is emitted, it exacerbates the absorption loss. A variety of ETL and HTL materials was investigated for application in the low voltage SSL device structure. Several of the materials were found to successfully yield low operating device voltages without incurring excessive absorption loss when the extraction enhancement structure was applied. An internal extraction layer comprises two essential components: a light extraction element (LEE) that does the actual extraction of emitted light and a light coupling layer (LCL) that allows the emitted light to interact with the extraction element. Modeling results show that the optical index of the LCL needs to be high, preferably higher than that of the organic layers with an n value of {approx}1.8. In addition, since the OLED structure needs to be built on top of it the LCL needs to be physically and chemically benign. As the project concluded, our focus was on the tandem hybrid device, which proved to be the more efficient architecture. Cost-efficient device fabrication will provide the next challenges with this device architecture in order to allow this architecture to be commercialized.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Microwave Soil Moisture Retrieval Under Trees

Soil moisture is recognized as an important component of the water, energy, and carbon cycles at the interface between the Earth's surface and atmosphere. Current baseline soil moisture retrieval algorithms for microwave space missions have been developed and validated only over grasslands, agricultural crops, and generally light to moderate vegetation. Tree areas have commonly been excluded from operational soil moisture retrieval plans due to the large expected impact of trees on masking the microwave response to the underlying soil moisture. Our understanding of the microwave properties of trees of various sizes and their effect on soil moisture retrieval algorithms at L band is presently limited, although research efforts are ongoing in Europe, the United States, and elsewhere to remedy this situation. As part of this research, a coordinated sequence of field measurements involving the ComRAD (for Combined Radar/Radiometer) active/passive microwave truck instrument system has been undertaken. Jointly developed and operated by NASA Goddard Space Flight Center and George Washington University, ComRAD consists of dual-polarized 1.4 GHz total-power radiometers (LH, LV) and a quad-polarized 1.25 GHz L band radar sharing a single parabolic dish antenna with a novel broadband stacked patch dual-polarized feed, a quad-polarized 4.75 GHz C band radar, and a single channel 10 GHz XHH radar. The instruments are deployed on a mobile truck with an 19-m hydraulic boom and share common control software; real-time calibrated signals, and the capability for automated data collection for unattended operation. Most microwave soil moisture retrieval algorithms developed for use at L band frequencies are based on the tau-omega model, a simplified zero-order radiative transfer approach where scattering is largely ignored and vegetation canopies are generally treated as a bulk attenuating layer. In this approach, vegetation effects are parameterized by tau and omega, the microwave vegetation opacity and single scattering albedo. One goal of our current research is to determine whether the tau-omega model can work for tree canopies given the increased scatter from trees compared to grasses and crops, and. if so, what are effective values for tau and omega for trees.

O'Neill, P.↗

GAS MOTION STUDY OF Ly{alpha} EMITTERS AT z {approx} 2 USING FUV AND OPTICAL SPECTRAL LINES {sup ,}

We present the results of Magellan/MMIRS and Keck/NIRSPEC spectroscopy for five Ly{alpha} emitters (LAEs) at z {approx_equal} 2.2 for which high-resolution FUV spectra from Magellan/MagE are available. We detect nebular emission lines including H{alpha} on the individual basis and low-ionization interstellar (LIS) absorption lines in a stacked FUV spectrum, and measure average offset velocities of the Ly{alpha} line, {Delta}v {sub Ly{alpha}}, and LIS absorption lines, {Delta}v {sub abs}, with respect to the systemic velocity defined by the nebular lines. For a sample of eight z {approx} 2-3 LAEs without active galactic nucleus from our study and the literature, we obtain {Delta}v {sub Ly{alpha}} = 175 {+-} 35 km s{sup -1}, which is significantly smaller than that of Lyman-break Galaxies (LBGs), {Delta}v {sub Ly{alpha}} {approx_equal} 400 km s{sup -1}. The stacked FUV spectrum gives {Delta}v {sub abs} = -179 {+-} 73 km s{sup -1}, comparable to that of LBGs. These positive {Delta}v {sub Ly{alpha}} and negative {Delta}v {sub abs} suggest that LAEs also have outflows. In contrast to LBGs, however, the LAEs' {Delta}v {sub Ly{alpha}} is as small as |{Delta}v {sub abs}|, suggesting low neutral hydrogen column densities. Such a low column density with a small number of resonant scattering may cause the observed strong Ly{alpha} emission of LAEs. We find an anti-correlation between Ly{alpha} equivalent width (EW) and {Delta}v {sub Ly{alpha}} in a compilation of LAE and LBG samples. Although its physical origin is not clear, this anti-correlation result appears to challenge the hypothesis that a strong outflow, by means of a reduced number of resonant scattering, produces a large EW. If LAEs at z > 6 have similarly small {Delta}v {sub Ly{alpha}} values, constraints on the reionization history derived from the Ly{alpha} transmissivity may need to be revised.

79 ASTRONOMY AND ASTROPHYSICS↗

Fermi-LAT constraints on dark matter annihilation cross section from observations of the Fornax cluster

We analyze 2.8-yr data of 1–100 GeV photons for clusters of galaxies, collected with the Large Area Telescope onboard the Fermi satellite. By analyzing 49 nearby massive clusters located at high Galactic latitudes, we find no excess gamma-ray emission towards directions of the galaxy clusters. Using flux upper limits, we show that the Fornax cluster provides the most stringent constraints on the dark matter annihilation cross section. Stacking a large sample of nearby clusters does not help improve the limit for most dark matter models. This suggests that a detailed modeling of the Fornax cluster is important for setting robust limits on the dark matter annihilation cross section based on clusters. We therefore perform the detailed mass modeling and predict the expected dark matter annihilation signals from the Fornax cluster, by taking into account effects of dark matter contraction and substructures. By modeling the mass distribution of baryons (stars and gas) around a central bright elliptical galaxy, NGC 1399, and using a modified contraction model motivated by numerical simulations, we show that the dark matter contraction boosts the annihilation signatures by a factor of 4. For dark matter masses around 10 GeV, the upper limit obtained on the annihilation cross section times relative velocity is (σν)∼<(2–3) × 10{sup −25} cm{sup 3} s{sup −1}, which is within a factor of 10 from the value required to explain the dark matter relic density. This effect is more robust than the annihilation boost due to substructure, and it is more important unless the mass of the smallest subhalos is much smaller than that of the Sun.

79 ASTRONOMY AND ASTROPHYSICS↗

Position Paper on Practicable Performance Criteria for the Removal Efficiency of Volatile Radionuclides

As a result of fuel reprocessing, volatile radionuclides may be released from the facility stack if no processes are put in place to remove them. The radionuclides that are of concern in this document are 3 H, 14 C, 85 Kr, and 129 I. The question we attempted to answer is how efficient must this removal process be for each of these radionuclides? To answer this question, we examined the three regulations that may impact the degree to which these radionuclides must be reduced before process gases can be released from the facility. These regulations are 40 CFR 61 (EPA 2010a), 40 CFR 190(EPA 2010b), and 10 CFR 20 (NRC 2012). These regulations apply to the total radionuclide release and to a particular organ - the thyroid. Because these doses can be divided amongst all the radionuclides in different ways and even within the four radionuclides in question, we provided several cases. We first looked at the inventories for these radionuclides for three fuel types (PWR UOX, PWR MOX, and AHTGR), several burn-up values, and time out of reactor extending to 200 y. We calculated doses to the maximum exposed individual (MEI) with the EPA code CAP-88 (Rosnick 1992). Finally, we looked at two dose cases. Allocating all of the allowable dose to be used by the volatile radionuclides is one case, but, perhaps, unrealistic. In lieu of this, we arbitrarily selected a value of 10% of the allowable dose to be assigned to the volatile radionuclides. We calculated the required decontamination factors (DFs) for both of these cases, including the case for the thyroid dose for which 14 C and 129 I were the main contributors. With respect to 129 I doses, we found that the highest dose was calculated with iodine as a fine particulate. The dose scaled as the fraction of the total 129 I that was particulate. Therefore, we assumed for all of our calculations that 100% of the 129 I was particulate and allow the user of the results given here to scale our calculated doses to their needs.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fragmentation of 200 and 244 MEV/u Carbon Beams in Thick Tissue-Like Absorbers

Stacks consisting of thin CR-39 sheets sandwiched between thick lucite and water absorbers were perpendicularly bombarded by C-12 ions at 200 and 244 MeV/u. Track radius distributions representing the charge composition of the fragmented beams were automatically measured by a particle track analysis system. After analysis of the nuclear charge distributions, the total charge removal cross-sections and elemental production cross-sections of fragments with atomic numbers from 5 to 3, were obtained down to the lower energies (approx. 50 and 100 MeV/u, respectively). It has been found that the measured total charge removal cross-section agrees with theoretical predictions within approx. 10% and very well with previous experiments in corresponding energy regions. Two model calculations for production of B fragment are in good agreement with our measured data while a third model overestimates it by approx. 12%. Theoretical cross-sections for Be and Li fragments differ strongly among the different models and from measured values.

Golovchenko, A. N.↗

Capacitive Deionization Using Alternating Polarization: Effect of Surface Charge on Salt Removal

Alternating polarization (AP) at ±1.2/0 V is performed on a capacitive deionization stack assembled with carbon xerogel (CX) electrodes. Long-term testing shows enhanced cycling stability without the formation of inversion peaks. AP also leads to an arch-shaped plot of salt adsorption capacity (SAC) versus cycling time, with the highest SAC of approximately 3 mg (NaCl) g −1 (CX) during this long-term test. Characterization of both the freshly prepared and cycled electrodes depict that AP results in surface charge of all the electrodes being modified from positive to negative character. Here by leveraging balances of electronic, surface, and ionic charges in carbon micropores, it is found that a portion of the electronic charge contributes to the ionic charge for salt adsorption, and another portion is parasitically consumed to balance the surface charge during the charge reconciliation process. When the consumption of electronic charge for charge reconciliation becomes minimal, both the positive and negative surface charges are nearly equivalent on the CX electrode. Under such a condition, the highest SAC values can be achieved for AP testing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Using ChemCam LIBS data to constrain grain size in rocks on Mars: Proof of concept and application to rocks at Yellowknife Bay and Pahrump Hills, Gale crater

Grain size in martian sedimentary rocks can be constrained using point-to-point chemical variabilities in Laser Induced Breakdown Spectroscopy (LIBS) data from the ChemCam instrument on the Mars Science Laboratory (MSL) Curiosity rover. The diameter of each point ablated by the ChemCam laser is in the range of medium to coarse sand in size. Thus, rocks with grains significantly smaller than the laser spot size produce bulk rock compositions at each LIBS point and low point-to-point chemical variability among LIBS points. In contrast, analyses of rocks with grains about the size of the spot or larger contain contributions from individual grains at each point and often have high point-to-point chemical variability. Here the Gini index, a statistical parameter, was used to calculate the point-to-point chemical variability in major-element oxide compositions derived from the ChemCam LIBS data. First, the total range of each LIBS major-element oxide composition was normalized from 0 to 1 across all LIBS observations. Then the Gini index was calculated for each oxide in each LIBS observation. Finally, the Gini indices of each oxide were averaged to derive a Gini index mean score, G MEAN , for each LIBS observation. A correlation between G MEAN and grain size was validated using sedimentary rocks of various grain sizes from the Yellowknife Bay formation and the Pahrump Hills member of the Murray formation in Gale crater. Overall, finer-grained rocks had smaller G MEAN than coarser-grained rocks. To calibrate G MEAN to grain size, grain size estimates based on visual assessment of high-resolution images were compared to G MEAN values for the same targets to create a calibrated scale. This calibrated scale was used to infer the grain size of rocks with unknown grain size. Overall, the grain sizes predicted for rocks with unknown grain size overlapped with those of known grain size from the same units and/or bedrock targets. The grain sizes inferred using the G MEAN based on ChemCam LIBS data are complimentary to those determined from images and both techniques can be used to improve interpretations of the depositional environments of rocks analyzed by Curiosity and future Mars missions with LIBS, such as the Mars 2020 rover.

58 GEOSCIENCES↗

Monitoring the CMS Data Acquisition System

The CMS data acquisition system comprises O(20000) interdependent services that need to be monitored in near real-time. The ability to monitor a large number of distributed applications accurately and effectively is of paramount importance for rob ust operations. Application monitoring entails the collection of a large number of simple and composed values made available by the software components and hardware devices. A key aspect is that detection of deviations from a specified behaviour is suppor ted in a timely manner, which is a prerequisite in order to take corrective actions efficiently. Given the size and time constraints of the CMS data acquisition system, efficient application monitoring is an interesting research problem. We propose an app roach that uses the emerging paradigm of Web-service based eventing systems in combination with hierarchical data collection and load balancing. Scalability and efficiency are achieved by a decentralized architecture, splitting up data collections into re gions of collections. An implementation following this scheme is deployed as the monitoring infrastructure of the CMS experiment at the Large Hadron Collider. All services in this distributed data acquisition system are providing standard web service inte rfaces via XML, SOAP and HTTP [15,22]. Continuing on this path we adopted WS-* standards implementing a monitoring system layered on top of the W3C standards stack. We designed a load-balanced publisher/subscriber system with the ability to include high-s peed protocols [10,12] for efficient data transmission [11,13,14] and serving data in multiple data formats.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

β -decay half-lives and β -delayed neutron emission probabilities for several isotopes of Au, Hg, Tl, Pb, and Bi, beyond N = 126

Background: There have been measurements on roughly 230 nuclei that are β-delayed neutron emitters. They range from 8 He up to 150 La . Apart from 210 Tl, with a branching ratio of only 0.007%, no other neutron emitter has been measured beyond A = 150 . Therefore, new data are needed, particularly in the region of heavy nuclei around N = 126 , in order to guide theoretical models and help understand the formation of the third r-process peak at A ~ 195. Purpose: To measure both β-decay half-lives and neutron branching ratios of several neutron-rich Au, Hg, Tl, Pb, and Bi isotopes beyond N = 126 . Method: Ions of interest were produced by fragmentation of a 238 U beam, selected and identified via the GSI-FRS fragment separator. A stack of segmented silicon detectors (SIMBA) was used to measure ion implants and β decays. An array of 30 3 He tubes embedded in a polyethylene matrix (BELEN) was used to detect neutrons with high efficiency and selectivity. A self-triggered digital system is employed to acquire data and to enable time correlations. The latter were analyzed with an analytical model and results for the half-lives and neutron-branching ratios were derived by using the binned maximum-likelihood method. Results: Twenty new β-decay half-lives are reported for 204-206 Au, 208 – 211 Hg, 211 – 216 Tl , 215 – 218 Pb, and 218 – 220 Bi, nine of them for the first time. Neutron emission probabilities are reported for 210, 211 Hg and 211 – 216 Tl . Conclusions: The new β-decay half-lives are in good agreement with previous measurements on nuclei in this region. Lastly, the measured neutron emission probabilities are comparable to or smaller than values predicted by global models such as relativistic Hartree Bogoliubov plus the relativistic quasi-particle random phase approximation (RHB + RQRPA).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

High-resolution spectroscopy of extremely metal-poor stars from SDSS/Segue. II. Binary fraction

The fraction of binary systems in various stellar populations of the Galaxy and the distribution of their orbital parameters are important but not well-determined factors in studies of star formation, stellar evolution, and Galactic chemical evolution. While observational studies have been carried out for a large sample of nearby stars, including some metal-poor Population II stars, almost no constraints on the binary nature for extremely metal-poor (EMP; [Fe/H] <−3.0) stars have yet been obtained. Here we investigate the fraction of double-lined spectroscopic binaries and carbon-enhanced metal-poor (CEMP) stars, many of which could have formed as pairs of low-mass and intermediate-mass stars, to estimate the lower limit of the fraction of binary systems having short periods. The estimate is based on a sample of very metal-poor stars selected from the Sloan Digital Sky Survey and observed at high spectral resolution in a previous study by Aoki et al. That survey reported 3 double-lined spectroscopic binaries and 11 CEMP stars, which we consider along with a sample of EMP stars from the literature compiled in the SAGA database. We have conducted measurements of the velocity components for stacked absorption features of different spectral lines for each double-lined spectroscopic binary. Our estimate indicates that the fraction of binary stars having orbital periods shorter than 1000 days is at least 10%, and possibly as high as 20% if the majority of CEMP stars are formed in such short-period binaries. This result suggests that the period distribution of EMP binary systems is biased toward short periods, unless the binary fraction of low-mass EMP stars is significantly higher than that of other nearby stars.

79 ASTRONOMY AND ASTROPHYSICS↗

Acidities of MgO surface sites: implications for the formation mechanism of Mg(OH) 2

The hydroxylation of periclase (MgO) to brucite (Mg(OH) 2 ) is thought to be an important intermediate step when using MgO to capture CO 2 from the atmosphere. However, the mechanism of hydroxylation of MgO to form Mg(OH) 2 is poorly understood. In this work, we used atomic-scale density functional tight binding simulations coupled with the metadynamics rare event method to analyze the surface chemistry of MgO and the acid dissociation equilibrium constants (pK a ) of its surface sites. The method and parameters were validated by calculating the pK a for hydroxylation of the first shell water bound to aqueous Mg 2+ ion. The pK a value derived using a probabilistic method was 12.3, which is in fair agreement with the accepted value of 11.4, with the difference between them equal to a ∼5 kJ mol −1 error in the calculations. We then extended these pK a calculations to probe the hydroxylation reactions of the surface sites of the MgO(100)–water interface, arriving at pK a s of 5.4 to deprotonate terminal water molecules bound to the surface magnesium sites (η-OH 2 or 〉MgOH 2 ), and 13.9 to deprotonate hydroxylated bridging oxygen sites (μ 5 -oxo or 〉O). Hydroxide (OH − ) adsorption on the surface was also probed and found to be less thermodynamically favorable than deprotonation of the terminal water molecule. The plausibility of the computed pK a s was verified using an activity-based speciation model and compared to pH measurements of water equilibrated with MgO nanoparticles and single crystals. The model predicted a solution pH of 7.1 when surface sites buffered and the pH of 12.0 when MgO dissolution dominated. These are close to the experimental initial solution pHs of 7–7.5 and the long term pHs of ∼10.5. The similarity suggests that the calculated pK a values from the DFTB+/metadynamics simulations are plausible and that these methods can be a useful tool to probe reaction mechanisms involving covalent bonds.

Adapa, Sai Krishna Reddy [Oak Ridge National Labor↗

Direct comparison of elastic incoherent neutron scattering experiments with molecular dynamics simulations of DMPC phase transitions

Neutron scattering techniques have been employed to investigate 1,2-dimyristoyl-sn-glycero-3- phosphocholine (DMPC) membranes in the form of multilamellar vesicles (MLVs) and deposited, stacked multilamellar-bilayers (MLBs), covering transitions from the gel to the liquid phase. Neutron diffraction was used to characterise the samples in terms of transition temperatures, whereas elastic incoherent neutron scattering (EINS) demonstrates that the dynamics on the sub-macromolecular length-scale and pico- to nano-second time-scale are correlated with the structural transitions through a discontinuity in the observed elastic intensities and the derived mean square displacements. Molecular dynamics simulations have been performed in parallel focussing on the length-, time- and temperature-scales of the neutron experiments. They correctly reproduce the structural features of the main gel-liquid phase transition. Particular emphasis is placed on the dynamical amplitudes derived from experiment and simulations. Two methods are used to analyse the experimental data and mean square displacements. They agree within a factor of 2 irrespective of the probed time-scale, i.e. the instrument utilized. Mean square displacements computed from simulations show a comparable level of agreement with the experimental values, albeit, the best match with the two methods varies for the two instruments. Consequently, experiments and simulations together give a consistent picture of the structural and dynamical aspects of the main lipid transition and provide a basis for future, theoretical modelling of dynamics and phase behaviour in membranes. The need for more detailed analytical models is pointed out by the remaining variation of the dynamical amplitudes derived in two different ways from experiments on the one hand and simulations on the other.

Aoun, Bachir↗

Bioinspired engineering of exploration systems for NASA and DoD

A new approach called bioinspired engineering of exploration systems (BEES) and its value for solving pressing NASA and DoD needs are described. Insects (for example honeybees and dragonflies) cope remarkably well with their world, despite possessing a brain containing less than 0.01% as many neurons as the human brain. Although most insects have immobile eyes with fixed focus optics and lack stereo vision, they use a number of ingenious, computationally simple strategies for perceiving their world in three dimensions and navigating successfully within it. We are distilling selected insect-inspired strategies to obtain novel solutions for navigation, hazard avoidance, altitude hold, stable flight, terrain following, and gentle deployment of payload. Such functionality provides potential solutions for future autonomous robotic space and planetary explorers. A BEES approach to developing lightweight low-power autonomous flight systems should be useful for flight control of such biomorphic flyers for both NASA and DoD needs. Recent biological studies of mammalian retinas confirm that representations of multiple features of the visual world are systematically parsed and processed in parallel. Features are mapped to a stack of cellular strata within the retina. Each of these representations can be efficiently modeled in semiconductor cellular nonlinear network (CNN) chips. We describe recent breakthroughs in exploring the feasibility of the unique blending of insect strategies of navigation with mammalian visual search, pattern recognition, and image understanding into hybrid biomorphic flyers for future planetary and terrestrial applications. We describe a few future mission scenarios for Mars exploration, uniquely enabled by these newly developed biomorphic flyers.

Space Flight↗