Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “turbulence methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Data reduction and analysis of ISEE magnetometer experiment

The ISEE-1 and -2 magnetometer data was reduced. The up and downstream turbulence associated with interplanetary shocks were studied, including methods of determining shock normals, and the similarities and differences in laminar and quasi-laminar shock structure. The associated up and downstream turbulence was emphasized. The distributions of flux transfer events, field aligned currents in the near tail, and substorm dynamics in the magnetotail were also investigated.

Russell, C. T.↗
NASA NTRS2016

Towards a Viscous Wall Model for Immersed Boundary Methods

Immersed boundary methods are frequently employed for simulating flows at low Reynolds numbers or for applications where viscous boundary layer effects can be neglected. The primary shortcoming of Cartesian mesh immersed boundary methods is the inability of efficiently resolving thin turbulent boundary layers in high-Reynolds number flow application. The inefficiency of resolving the thin boundary is associated with the use of constant aspect ratio Cartesian grid cells. Conventional CFD approaches can efficiently resolve the large wall normal gradients by utilizing large aspect ratio cells near the wall. This paper presents different approaches for immersed boundary methods to account for the viscous boundary layer interaction with the flow-field away from the walls. Different wall modeling approaches proposed in previous research studies are addressed and compared to a new integral boundary layer based approach. In contrast to common wall-modeling approaches that usually only utilize local flow information, the integral boundary layer based approach keeps the streamwise history of the boundary layer. This allows the method to remain effective at much larger y+ values than local wall modeling approaches. After a theoretical discussion of the different approaches, the method is applied to increasingly more challenging flow fields including fully attached, separated, and shock-induced separated (laminar and turbulent) flows.

Immersed↗
NASA NTRS2001

Development of a Hybrid RANS/LES Method for Compressible Mixing Layer Simulations

A hybrid method has been developed for simulations of compressible turbulent mixing layers. Such mixing layers dominate the flows in exhaust systems of modem day aircraft and also those of hypersonic vehicles currently under development. The hybrid method uses a Reynolds-averaged Navier-Stokes (RANS) procedure to calculate wall bounded regions entering a mixing section, and a Large Eddy Simulation (LES) procedure to calculate the mixing dominated regions. A numerical technique was developed to enable the use of the hybrid RANS/LES method on stretched, non-Cartesian grids. The hybrid RANS/LES method is applied to a benchmark compressible mixing layer experiment. Preliminary two-dimensional calculations are used to investigate the effects of axial grid density and boundary conditions. Actual LES calculations, performed in three spatial directions, indicated an initial vortex shedding followed by rapid transition to turbulence, which is in agreement with experimental observations.

Georgiadis, Nicholas J.↗
NASA NTRS1972

Pulsed differential holographic measurements of vibration modes of high temperature panels

Holography is a lensless imaging technique which can be applied to measure static or dynamic displacements of structures. Conventional holography cannot be readily applied to measure vibration modes of high-temperature structures, due to difficulties caused by thermal convection currents. The present report discusses the use of pulsed differential holography, which is a technique for recording structural motions in the presence of random fluctuations such as turbulence. An analysis of the differential method is presented, and demonstration experiments were conducted using heated stainless steel plates. Vibration modes were successfully recorded for the heated plates at temperatures of 1000, 1600, and 2000 F. The technique appears promising for such future measurments as vibrations of the space shuttle TPS panels or recording flutter of aeroelastic models in a wind-tunnel.

Evensen, D. A.↗
NASA NTRS1972

Analysis of the Injection of a Heated, Turbulent Jet into a Moving Mainstream, with Emphasis on a Thermal Discharge in a Waterway

An experimental and theoretical investigation was undertaken to study the trajectory and growth of thermal effluents having a range of discharge velocities and temperatures. The discharge of a turbulent effluent into a waterway was mathematically modeled as a submerged jet injection process by using an integral method which accounts for natural fluid mechanisms such as turbulence, entrainment, buoyancy, and heat transfer. The analytical results are supported by experimental data and demonstrate the usefulness of the theory for estimating the location and size of the effluent with respect to the discharge point. The capability of predicting jet flow properties, as well as two- and three-dimensional jet paths, was enhanced by obtaining the jet cross-sectional area during the solution of the conservation equations. Realistic estimates of temperature in the effluent were acquired by accounting for heat losses in the jet flow due to forced convection and to entrainment of free-stream fluid into the jet.

Campbell, J. F.↗
NASA NTRS1973

On local inflexional instability in boundary-layer flows.

Development of a linearized theory of the two- and three-dimensional incompressible viscous flows ensuing from locally unstable velocity profiles. Indications of the theory with respect to the instability of the two-dimensional separation bubble and the mechanisms underlying formation of the turbulence wedge behind a fixed roughness element are pointed out. In connection with the aforementioned mechanisms, a theoretically based argument is advanced that, as a result of local inflectional instability of the velocity profile in a succession of skewed planes, a corresponding succession of stationary vortices is induced, the induction process terminating at the boundaries of the turbulence wedge when the velocity profiles along the boundaries themselves become unstable. It is suggested that a rational method of predicting the occurrence of roughness-induced turbulence wedges might be possible if a theory were available for the steady laminar flow caused by the roughness at a stage just prior to transition.

Tobak, M.↗
NASA NTRS1975

Saturation effects associated with sound propagation in a turbulent medium

A theoretical analysis of the acoustic wave field radiated by a time-harmonic point source in a homogeneous, isotropic turbulent medium is presented. The smoothing method is used to study the incoherent, or randomly fluctuating, component of the wave field. The analysis considers the effect on the wave of the velocity fluctuations, as well as the index-of-refraction fluctuations, of the medium. An approximate expression for the second moment of the incoherent wave is obtained for the case in which the wavelenght is much less than the minimum correlation length of the medium. This expression shows that the fluctuations of the wave increase initially in proportion to the propagation distance, but that at larger distances they tend to a limiting, or saturation, value. These results agree with observations of waves propagating in real media. It is also found that the mean square of the total (i.e., coherent plus incoherent) acoustic pressure is unaffected by the randomness of the medium.

Wenzel, A. R.↗
NASA NTRS1976

Turbulence and numerical wind tunnels

The feasibility and possible significance of aerodynamic simulations are considered. Despite certain limitations, there is reason to believe that many useful and important flows containing turbulence can be computed with an accuracy acceptable for use in aircraft designs. Attention is given to the equations for unsteady fluid flow, the direct calculation of unsteady viscous flows, the direct calculation of nonlinear equations, the computation of flows about bodies using turbulence modeling, future developments in numerical methods, and future developments in computers.

Lomax, H.↗
NASA NTRS1977

Diffusion coefficients estimated from turbulence data measured by the Metrac positioning system in Minneapolis field test

An analysis is presented of the tropospheric turbulence data obtained by the Metrac positioning system, a radio location system which employs the Doppler principle to track inexpensive expendable balloon-borne transmitters. A Minneapolis field test of the Metrac system provided one-second samples of transmitter frequency from balloons tracked by four ground stations for more than an hour. The derivation of diffusion coefficients from the turbulence data was conducted by two methods, yielding highly consistent results.

Gage, K. S.↗
NASA NTRS1980

Interaction between a normal shock wave and a turbulent boundary layer at high transonic speeds. II - Wall shear stress

Asymptotic methods are used to calculate the shear stress at the wall for the interaction between a normal shock wave and a turbulent boundary layer on a flat plate. A mixing length model is used for the eddy viscosity. The shock wave is taken to be strong enough that the sonic line is deep in the boundary layer and the upstream influence is thus very small. It is shown that unlike the result found for laminar flow an asymptotic criterion for separation is not found; however, conditions for incipient separation are computed numerically using the derived solution for the shear stress at the wall. Results are compared with available experimental measurements.

Liou, M. S.↗
NASA NTRS1980

Streamwise computation of duct flows

A computational method is presented to calculate momentum and energy transport in two-dimensional viscous compressible duct flows. The flow in the duct is partitioned into finite streams. The difference equations are then obtained by applying momentum and energy conservation principles directly to the individual streams. The method is applicable to laminar and turbulence flows.

Greywall, M. S.↗
NASA NTRS1982

A January angular momentum balance in the OSU two-level atmospheric general circulation model

The present investigation is concerned with an analysis of the atmospheric angular momentum balance, based on the simulation data of the Oregon State University two-level atmospheric general circulation model (AGCM). An attempt is also made to gain an understanding of the involved processes. Preliminary results on the angular momentum and mass balance in the AGCM are shown. The basic equations are examined, and questions of turbulent momentum transfer are investigated. The methods of analysis are discussed, taking into account time-averaged balance equations, time and longitude-averaged balance equations, mean meridional circulation, the mean meridional balance of relative angular momentum, and standing and transient components of motion.

Kim, J.-W.↗
NASA NTRS1983

Gas-Temperature Measurement With Minimal Perturbation

Method for measuring temperature of hot turbulent gases uses three heatflux calorimeters. One calorimeter measures radiative heat flux, while other two measure total heat flux (convective and radiative), at two different temperatures. Adapted for commercial uses in such operations as monitoring temperatures of flue gases, piped liquid or gaseous products, internal-combustion or jet engine exhausts.

Fu, T. S.↗
NASA NTRS1983

Improved design of subcritical and supercritical cascades using complex characteristics and boundary layer correction

The method of complex characteristics and hodograph transformation for the design of shockless airfoils was extended to design supercritical cascades with high solidities and large inlet angles. This capability was achieved by introducing a conformal mapping of the hodograph domain onto an ellipse and expanding the solution in terms of Tchebycheff polynomials. A computer code was developd based on this idea. A number of airfoils designed with the code are presented. Various supercritical and subcritical compressor, turbine and propeller sections are shown. The lag-entrainment method for the calculation of a turbulent boundary layer was incorporated to the inviscid design code. The results of this calculation are shown for the airfoils described. The elliptic conformal transformation developed to map the hodograph domain onto an ellipse can be used to generate a conformal grid in the physical domain of a cascade of airfoils with open trailing edges with a single transformation. A grid generated with this transformation is shown for the Korn airfoil.

Sanz, J. M.↗
NASA NTRS1983

Computation of supersonic viscous flows around pointed bodies at large incidence

A recently reported parabolized Navier-Stokes method has been extended to compute turbulent supersonic flows around cones and an ogive-cylinder body at large incidence. The algebraic eddy-viscosity turbulence model contained in the code was modified to properly account for the large regions of cross-flow separation that occur in these flows. Extensive comparisons between computed results and experimentally measured flow fields are presented. The results show good agreement for viscous-layer profiles and details of the external leeward-side vortex structure at angles of attack up to three times the cone half angles. Details of the modified turbulence model are presented and discussed.

Degani, D.↗
NASA NTRS1983

A computational method for subsonic compressible flow in diffusers

Integral methods are used to model subsonic flow in planar diffusers operating with or without stall. Turbulent boundary layers are computed with a lag-entrainment method employing new correlations for shape factor and skin friction, which are based on a Coles-Van Driest velocity profile. The inviscid flow is modeled as one dimensional and is easily coupled with the boundary layer method to yield equations that can be solved by integrating in the downstream direction. Analysis of the equations describing flow in a diffuser shows that the boundary layer separation singularity may not be eliminated by viscous-inviscid interaction; a modified interaction scheme is used to guarantee a non-singular equation set. The nature of this singularity offers an explanation for the apparent universality of asymmetric stall in planar diffusers. Results for several flows demonstrate the accuracy and range of applicability of the method.

Childs, R. E.↗
NASA NTRS1984

Improved design of subcritical and supercritical cascades using complex characteristics and boundary-layer correction

The method of complex characteristics and hodograph transformation for the design of shockless airfoils was extended to design supercritical cascades with high solidities and large inlet angles. This capability was achieved by introducing a conformal mapping of the hodograph domain onto an ellipse and expanding the solution in terms of Tchebycheff polynomials. A computer code was developed based on this idea. A number of airfoils designed with the code are presented. Various supercritical and subcritical compressor, turbine and propeller sections are shown. The lag-entrainment method for the calculation of a turbulent boundary layer was incorporated to the inviscid design code. The results of this calculation are shown for the airfoils described. The elliptic conformal transformation developed to map the hodograph domain onto an ellipse can be used to generate a conformal grid in the physical domain of a cascade of airfoils with open trailing edges with a single transformation. A grid generated with this transformation is shown for the Korn airfoil. Previously announced in STAR as N83-24474

Sanz, J. M.↗