Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “trend analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Simulations of aerosol pH in China using WRF-Chem (v4.0): sensitivities of aerosol pH and its temporal variations during haze episodes

Aerosol pH is a fundamental property of aerosols in terms of atmospheric chemistry and its impact on air quality, climate, and health. Precise estimation of aerosol pH in chemical transport models (CTMs) is critical for aerosol modeling and thus influences policy development that partially relies on results from model simulations. We report the Weather Research and Forecasting Model coupled with Chemistry (WRF-Chem) simulated PM 2.5 pH over China during a period with heavy haze episodes in Beijing, and explore the sensitivity of the modeled aerosol pH to factors including emissions of nonvolatile cations (NVCs) and NH 3 , aerosol phase state assumption, and heterogeneous production of sulfate. We find that default WRF-Chem could predict spatial patterns of PM 2.5 pH over China similar to other CTMs, but with generally lower pH values, largely due to the underestimation of alkaline species (NVCs and NH 3 ) and the difference in thermodynamic treatments between different models. Increasing NH 3 emissions in the model would improve the modeled pH in comparison with offline thermodynamic model calculations of pH constrained by observations. In addition, we find that the aerosol phase state assumption and heterogeneous sulfate production are important in aerosol pH predictions for regions with low relative humidity (RH) and high anthropogenic SO 2 emissions, respectively. These factors should be better constrained in model simulations of aerosol pH in the future. Analysis of the modeled temporal trend of PM 2.5 pH in Beijing over a haze episode reveals a clear decrease in pH from 5.2 ± 0.9 in a clean period to 3.6 ± 0.5 in a heavily polluted period. The increased acidity under more polluted conditions is largely due to the formation and accumulation of secondary species including sulfuric acid and nitric acid, even though being modified by alkaline species (NVCs, NH 3 ). Our result suggests that NO 2 oxidation is unlikely to be important for heterogeneous sulfate production during the Beijing haze as the effective pH for NO 2 oxidation of S(IV) is at a higher pH of ~6.

54 ENVIRONMENTAL SCIENCES↗

The transverse Poisson's ratio of composites.

An expression is developed that makes possible the prediction of Poisson's ratio for unidirectional composites with reference to any pair of orthogonal axes that are normal to the direction of the reinforcing fibers. This prediction appears to be a reasonable one in that it follows the trends of the finite element analysis and the bounding estimates, and has the correct limiting value for zero fiber content. It can only be expected to apply to composites containing stiff, circular, isotropic fibers bonded to a soft matrix material.

Foye, R. L.↗

Technology assessment of future intercity passenger transportation systems. Volume 4: Scenarios

Four background scenarios that relate to alternative states of society in the next 25 to 50 years are described. The scenarios were developed for use in analyzing and evaluating alternative future intercity transportation technologies. The scenarios are based, in part, on discussions contained in the issue papers and, in part, on separate analysis of social and economic trends considered relevant for the evolution of intercity transportation.

Source record↗

Boundary layer thickness effect on boattail drag

A combined experimental and analytical program was conducted to investigate the effects of boundary layer changes on the flow over high angle boattail nozzles. The tests were run on an isolated axisymmetric sting mounted model. Various boattail geometries were investigated at high subsonic speeds over a range of boundary layer thicknesses. In general, boundary layer effects were small at speeds up to Mach 0.8. However, at higher speeds significant regions of separated flow were present on the boattail. When separation was present large reductions in boattail drag resulted with increasing boundary layer thickness. The analysis predicts both of these trends.

Blaha, B. J.↗

Boundary layer thickness effect on boattail drag

A combined experimental and analytical program has been conducted at the NASA Lewis Research Center, to investigate the effects of boundary layer changes on the flow over high angle boattail nozzles. The tests were run on an isolated axisymmetric sting mounted model. Various boattail geometries were investigated at high subsonic speeds over a range of boundary layer thicknesses. In general, boundary layer effects were small at speeds up to Mach 0.8. However, at higher speeds significant regions of separated flow were present on the boattail. When separation was present large reductions in boattail drag resulted with increasing boundary layer thickness. The analysis predicts both of these trends.

Blaha, B. J.↗

Space-based power conversion and power relay systems: Preliminary analysis of alternate systems

The results are presented of nine months of technical study of non-photovoltaic options for the generation of electricity for terrestrial use by satellite power stations (SPS). A concept for the augmentation of ground-based solar power plants by orbital sunlight reflectors was also studied. Three SPS types having a solar energy source and two which used nuclear reactors were investigated. Data derived for each included: (1) configuration definition, including mass statement; (2) information for use in environmental impact assessment; (3) energy balance (ratio of energy produced to that required to achieve operation), and (4) development and other cost estimates. Cost estimates were dependent upon the total program (development, placement and operation of a number of satellites) which was postulated. This postulation was based upon an analysis of national power capacity trends and guidelines received from MSFC.

Source record↗

Analysis of flight effects on noise radiation from jet flow using a convecting quadrupole model

The effects of flight on noise radiation from convecting quadrupoles in a jet flow are examined. The analysis shows that as flight velocity increases there is a steadily increasing amplification of the sound that is radiated into the forward arc and a large reduction of the sound that is radiated into the rearward arc. The analysis also shows the same trend when there is a reduction in the exhaust velocity with, however, a further rise in amplification in the forward quadrant and a drop in attenuation in the aft quadrant. Finally, it is concluded that there is a transmission effect tending to enhance the sound radiation by a density ratio pf/pj which increases with increasing jet temperature.

Dash, R.↗

Preliminary report on tests of tensile specimens with a part-through surface notch for a filament wound graphite/epoxy material

The behavior of tensile coupons with surface notches of various semi-elliptical shapes were evaluated for specimens obtained from a filament wound graphite/epoxy cylinder. The quasi-static test results, in some instances, are inadequate for defining complete trend curves and the interpretive analysis is considered to be preliminary. Specimens with very shallow notches were observed to be notch insensitive and the unnotched strength from these specimens was determined to be 54.97 Ksi. The failure strain of the laminate was found to be 1.328%. Specimens with deeper notches were sensitive to notch depth, notch aspect ratio, and specimen width. Using the unnotched strength of 54.97 Ksi and Poe's general toughness parameter, the fracture toughness was estimated to be 27.2 Ksi square root of In. Isotropic linear elastic fracture mechanics together with the estimated fracture toughness correctly predicted the influence of notch depth, aspect ratio, and specimen finitewidth.

Harris, C. E.↗

NIMBUS-7 SBUV (Solar Backscatter Ultraviolet) observations of solar UV spectral irradiance variations caused by solar rotation and active-region evolution for the period November 7, 1978 - November 1, 1980

Observations of temporal variations of the solar UV spectral irradiance over several days to a few weeks in the 160-400 nm wavelength range are presented. Larger 28-day variations and a second episode of 13-day variations occurred during the second year of measurements. The thirteen day periodicity is not a harmonic of the 28-day periodicity. The 13-day periodicity dominates certain episodes of solar activity while others are dominated by 28-day periods accompanied by a week 14-day harmonic. Techniques for removing noise and long-term trends are described. Time series analysis results are presented for the Si II lines near 182 nm, the Al I continuum in the 190 nm to 205 nm range, the Mg I continuum in the 210 nm to 250 nm range, the MgII H & K lines at 280 nm, the Mg I line at 285 nm, and the Ca II K & H lines at 393 and 397 nm.

Heath, D. F.↗

Temperature Data from Satellites

Several satellites and sounding systems used for measuring the temperature of the middle atmosphere are discussed. Retrieval methods, geopotential height data, the merging of data sets, and an analysis of long term temperature trends are discussed.

Barnett, J. J.↗

Temporal frequency of radio emissions for the April 25, 1984 flare

The National Geophysical Data Center archives data of the solar-terrestrial environment. The USAF Radio Solar Telescope Network (RSTN) data allow performance of time series analysis to determine temporal oscillations as low as three seconds. The X13/3B flare which erupted in region 4474 (S12E43) on the 24 to 25 of April 1984, was selected. The soft X-rays, 1 to 8 A, remained above X-levels for 50 minutes and the radio emissions measured at Learmonth Solar Observatory reached a maximum of 3.15 x 10 to the 5th power SFUs at 410 MHz at 0000UT. A power spectral analysis of the fixed frequency RSTN data from Learmonth shows possible quasi-periodic fluctuations in the range two to ten seconds. Repetition rates or quasi-periodicities, in the case of the power spectral analysis, generally showed the same trends as the average solar radio flux at 245 and 8800 MHz. The quasi-periodicities at 1415 MHz showed no such trends.

Wells, G. D.↗

Graben and extension in northern Tharsis, Mars

A morphometric analysis of north-south trending graben at 35 deg N in northern Tharsis is used to provide the first quantitative measurements of crustal extension in and strain for areas of the Martian crust that have undergone both extreme and mild deformation. These estimates also demonstrate the viability of the Viking data for making such quantitative assessment. Graben in the region accommodate about 8 km of post Early Amazonian east-west extension. This extension corresponds to a net regional strain of 0.45-0.61 percent; local strains vary from less than 1 percent to 5 percent. Extension is nonuniform and localized near 110 deg (south of Alba Patera and north of Ceraunius Fossae) because of reactivation of preexisting fractures in underlying basement and possibly due to superposition of stress fields from Tharsis and Alba Patera. A major mechanical discontinuity in the shallow crust, probably representing the base of or a strength contrast within the megaregolith, is observed. It occurs at a depth of 2 km on the profile flanks and is depressed to about 7.5 km near 110 deg due to loading of the crust by the volcano.

Plescia, J. B.↗

Some deformation trends and topographic characteristics of tesserae on Venus

Mapping of dominant trends of deformation and topographic analysis of tesserae reveal that (1) consistant patterns of deformation exist between individual tesserae; (2) regional deformation associated with coronae and rifts commonly overprints tesserae fabrics; (3) normalized area frequency plots of tesserae display a strongly bimodal distribution between -70 to 70 degrees latitude; and (4) the relief at tessera margins is relatively constant and independent of tessera elevation. We are continuing to expand these observations and test their implications for the formation of tesserae and for global models of deformation on Venus.

Price, Maribeth↗

Synthesis of passive microwave and radar altimeter data for estimating accumulation rates of polar snow

In this paper, we compare dry-snow extinction coefficients derived from radar altimeter data with brightness temperature data from passive microwave measurements over a portion of the East Antarctic plateau. The comparison between the extinction coefficients and the brightness temperatures shows a strong negative correlation, where the correlation coefficients ranged from -0.87 to -0.95. The extinction coefficient of the dry polar snow decreases with increasing surface elevation, while the average brightness temperature increases with surface elevation. Our analysis shows that the observed trends are related to geographic variations in scattering coefficient of snow, which in turn are controlled by variations in surface temperature and snow accumulation rate. By combining information present in the extinction coefficient and brightness temperature data sets, we develop a model that can be used to obtain quantitative estimates of the accumulation rate of dry polar snow.

Davis, Curt H.↗

Metallurgical Evaluations of Depainting Processes on Aluminum Substrate

In December 1993, the Environmental Protection Agency (EPA) Emission Standards Division and the National Aeronautics and Space Administration's (NASA's) Marshall Space Flight Center (MSFC) signed an Interagency Agreement (IA) initiating a task force for the technical assessment of alternative technologies for aerospace depainting operations. The United States Air Force (USAF) joined the task force in 1994. The mandates of the task force were: (1) To identify available alternative depainting systems that do not rely on methylene chloride or other ozone-depleting, chlorinated, and volatile organic carbon solvents. (2) To determine the viability, applicability, and pollution prevention potential of each identified alternative. (3) To address issues of safety, environmental impact, reliability, and maintainability. Through a Technical Implementation Committee (TIC), the task force selected and evaluated eight alternative paint stripping technologies: chemical stripping, carbon dioxide (CO2) blasting, xenon flashlamp and CO2 coatings removal (FLASHJET(R)), CO2 laser stripping, plastic media blasting (PMB), sodium bicarbonate wet stripping, high-pressure water blasting (WaterJet), and wheat starch abrasive blasting (Enviro-Strip(R)). (The CO2 blasting study was discontinued after the first depainting sequence.) This final report presents the results of the Joint EPA/NASA/USAF Interagency Depainting Study. Significant topics include: (1) Final depainting sequence data for the chemical stripping, PMB, sodium bicarbonate wet stripping, and WaterJet processes. (2) Strip rates for all eight technologies. (3) Sequential comparisons of surface roughness measurements for the seven viable depainting technologies. (4) Chronological reviews of and lessons learned in the conduct of all eight technologies. (5) An analysis of the surface roughness trends for each of the seven technologies. (6) Metallurgic evaluations of panels Summaries of corrosion and hydrogen embrittlement evaluations of chemical stripping panels, detailed descriptions of which appear in previous reports. Because the requirements for alternative systems are diverse, as are initial setup, training, and on-going operational considerations, this study does not recommend a particular product or process. Users of this study will draw their own conclusions from the data presented herein.

McGill, Preston↗

Effective Widths of Compression-Loaded Plates With a Cutout

A study of the effects of cutouts and laminate construction on the prebuckling and initial postbuckling stiffnesses, and the effective widths of compression-loaded, laminated-composite and aluminum square plates is presented. The effective-width concept is extended to plates with cutouts, and experimental and nonlinear finite-element analysis results are presented. Behavioral trends are compared for seven plate families and for cutout-diameter-to-plate-width ratios up to 0.66. A general compact design curve that can be used to present and compare the effective widths for a wide range of laminate constructions is also presented. A discussion of how the results can be used and extended to include certain types of damage, cracks, and other structural discontinuities or details is given. Several behavioral trends are described that initially appear to be nonintuitive. The results demonstrate a complex interaction between cutout size and plate orthotropy that affects the axial stiffness and effective width of a plate subjected to compression loads.

Hilburger, Mark W.↗

A model for live mission data systems using the OAIS reference model

Space sciences are confronted with overwhelming volume of data. The data rates are increasing, the granularity of registered observations is continuously refining, and computer technology allows producing terabytes of images and catalogs. The inexpensive emerging storage technologies, combined with the availability of high-speed communications will offer the infrastructure for extremely large data repositories to be accessible on-line. Mission data will be quickly accessible almost immediately after it has been collected from space observations. On-line science will demand for new tools and technologies for data access, data analysis, and data discovery. These trends will enhance the archival operational concepts mainly related to the long-term information preservation, placing an equally important emphasis on rapid data production, and dissemination to consumers.

mission data systems srchive system OAIS data mana↗

The Opportunities and Threats of Turning Airports into Hubs

This paper examines the opportunities and threats which arise when turning origin/destination airports into hubs. The analysis focuses on market development trends, competitive structures, especially in the light of airline network strategies and the growing rivalry between airports, and finally the potential financial impacts for the airport, including both investment efforts and the financial results from hub operations. We argue that in most cases a decision against converting a traditional origin/destination airport into a major transfer point is preferable to the transformation into a hub.

Kraus, Andreas↗