Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface level”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Two-Point Mixing, Buoyancy Sorting, and Updraft Dilution in the RACORO Campaign

Aircraft measurements of shallow cumulus cases from the RACORO campaign are studied in a transformed Paluch diagram. Previous studies have interpreted samples in Paluch diagrams in terms of two-point mixing and buoyancy sorting. The two-point mixing behavior is frequently seen in the RACORO observations and can be unambiguously distinguished from buoyancy sorting. The latter is not found in the RACORO observations and is also rare in a large-eddy simulation (LES) of a RACORO case. As opposed to often assumed gradual dilution of updrafts, around half of the instances of two-point mixing show no clear evidence of updraft dilution. We also find substantial spread in the properties of parcels that have adjusted to their level of neutral buoyancy and that a LES with horizontally homogeneous surface underestimates this spread. The inclusion of surface heterogeneity in the LES improves the agreement of its horizonal moisture variations with the aircraft measurements.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A continuous metal-insulator transition driven by spin correlations

While Mott insulators induced by Coulomb interactions are a well-recognized class of metal-insulator transitions, insulators purely driven by spin correlations are much less common, as the reduced energy scale often invites competition from other degrees of freedom. Here, we demonstrate a clean example of a spin-correlation-driven metal-insulator transition in the all-in-all-out pyrochlore antiferromagnet Cd 2 Os 2 O 7 , where the lattice symmetry is preserved by the antiferromagnetism. After the antisymmetric linear magnetoresistance from conductive, ferromagnetic domain walls is removed experimentally, the bulk Hall coefficient reveals four Fermi surfaces of both electron and hole types, sequentially departing the Fermi level with decreasing temperature below the Néel temperature, T N = 227 K. In Cd 2 Os 2 O 7 , the charge gap of a continuous metal-insulator transition opens only at T ~ 10 K << T N . The insulating mechanism parallels the Slater picture, but without a folded Brillouin zone, and contrasts sharply with Mott insulators and spin density waves, where the electronic gap opens above and at T N , respectively.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Doping-driven topological polaritons in graphene/$\alpha$-MoO 3 heterostructures

Control over charge carrier density provides an efficient way to trigger phase transitions and modulate the optoelectronic properties of materials. This approach can also be used to induce topological transitions in the optical response of photonic systems. Here we report a topological transition in the isofrequency dispersion contours of hybrid polaritons supported by a two-dimensional heterostructure consisting of graphene and α-phase molybdenum trioxide. By chemically changing the doping level of graphene, we observed that the topology of polariton isofrequency surfaces transforms from open to closed shapes as a result of doping-dependent polariton hybridization. Moreover, when the substrate was changed, the dispersion contour became dominated by flat profiles at the topological transition, thus supporting tunable diffractionless polariton propagation and providing local control over the optical contour topology. We achieved subwavelength focusing of polaritons down to 4.8% of the free-space light wavelength by using a 1.5-μm-wide silica substrate as an in-plane lens. Our findings could lead to on-chip applications in nanoimaging, optical sensing and manipulation of energy transfer at the nanoscale.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Excess free volume and structural properties of inert gas condensation synthesized nanoparticles based CuZr nanoglasses

Abstract Nanoglass (NG) as a new structure-tunable material has been investigated using both experiments and computational modeling. Experimentally, inert gas condensation (IGC) is commonly employed to prepare metallic glass (MG) nanoparticles that are consolidated using cold compression to generate an NG. In computational modeling, various methods have been used to generate NGs. However, due to the high computational cost involved, heretofore modeling investigations have not followed the experimental synthesis route. In this work, we use molecular dynamics simulations to generate an NG model by consolidating IGC-prepared Cu 64 Zr 36 nanoparticles following a workflow similar to that of experiments. The resulting structure is compared with those of NGs produced following two alternative procedures previously used: direct generation employing Voronoi tessellation and consolidation of spherical nanoparticles carved from an MG sample. We focus on the characterization of the excess free volume and the Voronoi polyhedral statistics in order to identify and quantify contrasting features of the glass-glass interfaces in the three NG samples prepared using distinct methods. Results indicate that glass-glass interfaces in IGC-based NGs are thicker and display higher structural contrast with their parent MG structure. Nanoparticle-based methods display excess free volume exceeding 4%, in agreement with experiments. IGC-prepared nanoparticles, which display Cu segregation to their surfaces, generate the highest glass-glass interface excess free volume levels and the largest relative interface volume with excess free volume higher than 3%. Voronoi polyhedral analysis indicates a sharp drop in the full icosahedral motif fraction in the glass-glass interfaces in nanoparticle-based NG as compared to their parent MG.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Structural trends in the dehydrogenation selectivity of palladium alloys

Alloying is well-known to improve the dehydrogenation selectivity of pure metals, but there remains considerable debate about the structural and electronic features of alloy surfaces that give rise to this behavior. To provide molecular-level insights into these effects, a series of Pd intermetallic alloy catalysts with Zn, Ga, In, Fe and Mn promoter elements was synthesized, and the structures were determined using in situ X-ray absorption spectroscopy (XAS) and synchrotron X-ray diffraction (XRD). The alloys all showed propane dehydrogenation turnover rates 5–8 times higher than monometallic Pd and selectivity to propylene of over 90%. Moreover, among the synthesized alloys, Pd 3 M alloy structures were less olefin selective than PdM alloys which were, in turn, almost 100% selective to propylene. This selectivity improvement was interpreted by changes in the DFT-calculated binding energies and activation energies for C–C and C–H bond activation, which are ultimately influenced by perturbation of the most stable adsorption site and changes to the d-band density of states. Furthermore, transition state analysis showed that the C–C bond breaking reactions require 4-fold ensemble sites, which are suggested to be required for non-selective, alkane hydrogenolysis reactions. These sites, which are not present on alloys with PdM structures, could be formed in the Pd 3 M alloy through substitution of one M atom with Pd, and this effect is suggested to be partially responsible for their slightly lower selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Understanding cation-disordered rocksalt oxyfluoride cathodes

Partial fluorine (F) substitution into the oxygen (O) sublattice has been shown to improve cycling stability of cation-disordered Li-excess rocksalt oxide (DRX) cathodes. Detailed understanding on failure mechanisms and key optimization knowledge of fluorinated-DRX (F-DRX), however, are lacking. In the present study, we incorporate different amounts of F into a baseline DRX system, Li 1.2 Ti 0.4 Mn 0.4 O 2 (LTMO3.0, 3.0 denotes nominal Li/Mn ratio), and synthesize two oxyfluoride compounds, Li-rich Li 1.3 Ti 0.3 Mn 0.4 O 1.7 F 0.3 (LTMOF3.25) and Mn-rich Li 1.2 Ti 0.2 Mn 0.6 O 1.8 F 0.2 (LTMOF2.0) with an increased and reduced Li/Mn ratio of 3.25 and 2.0, respectively. Through careful monitoring of chemical and structural evolution, we show that cycling-induced changes are manifested not only by Mn reduction and degradation of its local coordination environment, but also by F enrichment and formation of LiF-type of domains on the surface. A “concerted-densification” based failure mechanism, involving atomic-level changes in both transition-metal cationic sublattice and oxygen/fluorine anionic sublattice, is proposed for the degradation in F-DRX cathode materials. The study reveals that increasing F content accompanied by reduced Li/Mn ratio mitigates the degradation process, offering key design strategies in achieving balanced cathode capacity and stability.

25 ENERGY STORAGE↗
DOE OSTI2021

Probing the electronic properties of the electrified silicon/water interface by combining simulations and experiments.

Silicon (Si) is broadly used in electrochemical and photoelectrochemical devices, where the capacitive and Faradaic reactions at the Si/water interfaces are critical for signal transduction or noise generation. However, probing the electrified Si/water interface at the microscopic level remains a challenging task. Here we focus on hydrogenated Si surfaces in contact with water, relevant to transient electronics and photoelectrochemical modulation of biological cells and tissues. We show that by carrying out first principles molecular dynamics simulations of the Si(100)/water interface in the presence of an electric field we can realistically correlate the computed flat-band potential and tunneling current images at the interface with experimentally measured capacitive and Faradaic currents. Specifically, we validate our simulations in the presence of bias by performing pulsed chronoamperometry measurements on Si wafers in solution. Consistent with prior experiments, our measurements and simulations indicate the presence of voltage-dependent capacitive currents at the interface. We also find that Faradaic currents are weakly dependent on the applied bias, which we relate to surface defects present in newly prepared samples.

Ye, Zifan↗
DOE OSTI2023

Non-local contribution from small scales in galaxy–galaxy lensing: comparison of mitigation schemes

ABSTRACT Recent cosmological analyses with large-scale structure and weak lensing measurements, usually referred to as 3 × 2pt, had to discard a lot of signal to noise from small scales due to our inability to accurately model non-linearities and baryonic effects. Galaxy–galaxy lensing, or the position–shear correlation between lens and source galaxies, is one of the three two-point correlation functions that are included in such analyses, usually estimated with the mean tangential shear. However, tangential shear measurements at a given angular scale θ or physical scale R carry information from all scales below that, forcing the scale cuts applied in real data to be significantly larger than the scale at which theoretical uncertainties become problematic. Recently, there have been a few independent efforts that aim to mitigate the non-locality of the galaxy–galaxy lensing signal. Here, we perform a comparison of the different methods, including the Y-transformation, the point-mass marginalization methodology, and the annular differential surface density statistic. We do the comparison at the cosmological constraints level in a combined galaxy clustering and galaxy–galaxy lensing analysis. We find that all the estimators yield equivalent cosmological results assuming a simulated Rubin Observatory Legacy Survey of Space and Time (LSST) Year 1 like set-up and also when applied to DES Y3 data. With the LSST Y1 set-up, we find that the mitigation schemes yield ∼1.3 times more constraining S8 results than applying larger scale cuts without using any mitigation scheme.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Brachypodium SPEECHLESS2 Promoter Drives Expression of a Synthetic EPF to Reduce Stomatal Density in Sugarcane Without Pleiotropic Effects

Stomata are microscopic pores that regulate the exchange of CO 2 and water vapour, making them a major target for engineering plants with improved intrinsic water use efficiency (iWUE). Proof-of-concept studies have demonstrated the potential to increase iWUE by reducing stomatal density (SD) and stomatal conductance (g sw ) by ubiquitously expressing EPIDERMAL PATTERNING FACTOR (EPF) family genes. However, unwanted effects on leaf, stem and reproductive traits are often observed when EPFs are misexpressed in this fashion. We sought to test if these effects result from pleiotropy and to identify a targeted promoter that can circumvent the side effects while retaining the desired reduction in SD. A previously reported synthetic EPF (EPF syn ) was expressed in sugarcane ( Saccharum spp.) using two putatively tissue-specific promoters from Brachypodium distachyon (BdCESA7p and BdSPCH2p) and a ubiquitous control from Zea mays (ZmUBI4p). BdSPCH2p control reduced SD to statistically equivalent levels as ZmUBI4p on the abaxial (23%) and adaxial (23%) leaf surfaces. ZmUB4p and BdCESA7p induce expression in four tissue types often associated with pleiotropic effects in EPF-expressing low SD plants. Transgenic plants carrying either the BdCESA7p or ZmUBI4p EPF syn cassettes displayed leaf chlorosis, reduced leaf nitrogen and chlorophyll content, and altered stem architecture. However, transgenic events harboring the BdSPCH2p EPF syn cassette restricted EPF syn expression to the stomatal development zone and leaf nodal tissues and produced transgenic plants without the associated pleiotropic effects. These results represent an important step toward engineering low-SD crops since they show that targeted gene expression can engineer stomatal patterning without impairing agronomically important traits.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Dependence of Deep Convective Cell Properties on Meteorological and Aerosol Conditions during TRACER

Deep convective cells significantly influence Earth’s energy balance and water cycle. However, their accurate representation in numerical models remains challenging due to their small spatiotemporal scales and limited observational constraints. This study examines over ∼400 deep convective cells near Houston, observed by a dual-polarization C-band radar during the Tracking Aerosol Convection Interactions Experiment (TRACER) intensive observation period (June–September 2022). Cells are categorized by lifetime into short-lived (<40 min), intermediate-lived (40–80 min), and long-lived (80+ min) groups. Long-lived cells were broader (∼13.2 km at 2–4-km height) and deeper (∼11.4 km) than short-lived cells (∼6.4-km width, ∼7.31-km height). Using random forest (RF) modeling and correlation analyses, precipitable water vapor (PWV), 2–6-km lapse rate, 0–8-km bulk shear, and fine aerosol mass concentration (Mass_f) are identified as key predictors of cell lifetime. Higher PWV is associated with significantly longer convective cell lifetimes compared to the low-PWV group, particularly within low 2–6-km temperature lapse rate (LR_26km), moderate-to-higher 0–8-km bulk shear (BS_08km), and low-to-moderate Mass_f environments. RF analysis also identifies low-level (0–2 km) equivalent potential temperature, PWV, Mass_f, and surface latent heat flux as key predictors for cell width and height. Short-lived cells have higher aerosol number concentrations (500–1000-nm size range), linked to onshore wind conditions and marine aerosols; however, their low concentration suggests the sensitivity may reflect associated meteorological regimes rather than a direct aerosol effect. Long-lived cells have higher concentrations of organic and sulfate aerosols, while short-lived cells exhibit higher black carbon concentrations. These results highlight the intricate dependence of convective cell lifetimes and structure on environmental moisture, thermodynamics, wind shear, and aerosol characteristics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Highly-Active and Contaminant-Tolerant Cathodes for Durable Solid Oxide Fuel Cells

The objective of this project is to investigate the fundamental degradation methods occurring in solid oxide fuel cell (SOFC) cathodes when exposed to chromium and carbon dioxide contamination and to rationally design alkaline earth-based catalysts to increase stability and tolerance to contaminate poisoning. With a mechanistic and fundamental understanding of the degradation methods, advanced catalytic surface modifications can be applied to reduce degradation. The specific technical objectives are: (1) To identify/develop new catalysts (alkaline-earth based-) that are compatible chemically with the state-of-the-art cathode materials at high temperatures required for fabrication and with contaminates commonly encountered under operating conditions; (2) To improve the infiltration process for optimal control of the thickness, composition, and uniformity of the catalyst coatings; (3) To evaluate the electro-catalytic activity toward ORR of the chemically-stable materials when exposed to different types of contaminants using electrical conductivity relaxation measurements on bar samples and performance evaluation of catalyst-infiltrated cathodes; (4) To unravel the contamination-tolerant mechanisms of the new catalyst coatings under realistic environmental conditions (with different types of contaminants) using powerful in situ and in operando characterization techniques performed on model cells with thin-film/pattern electrodes, as guided by modeling and simulation; (5) To establish scientific basis for rational design of new catalysts of high tolerance to contaminants; (6) To validate the long term stability of modified LSCF cathodes in commercially available cells/stacks under ROC. Alkaline earth-based catalysts have been systematically explored and tested under various contamination conditions. BaCoO 3-δ (BCO) was shown to produce the best catalytic activity enhancement as well as stability in a variety of contaminating conditions, including CO 2 and chromium. The microstructural evolution was investigated with SEM, EDS, and Raman spectroscopy, showing the BCO catalyst prevents the formation of insulating SrCrO 4 by forming electrically conductive BaCrO 4 . Electrochemical relaxation measurements determined the BCO catalyst coatings increased the surface diffusion coefficient but did not significantly affect the diffusion coefficient and determined an optimum surface modification layer of 100 nm. A novel Ba 0.9 Co 0.7 Fe 0.2 Nb 0.1 O x (BCFN) catalyst was also shown to have excellent stability in chromium containing atmospheres. A novel surface sol-gel (SSG) surface modification, which offers superior thickness and compositional control, was applied to SOFCs to produce BaO catalyst coatings. SSG BaO coatings were shown to produce conformal coatings on the electrode surface, greatly 4 increasing stability in chromium containing atmospheres. An atomic level mechanistic approach was applied to investigate the stability of PrBa 0.8 Ca 0.2 Co 2 O 5+δ (PBCC) with respect to a variety of common contaminants, demonstrating thermodynamically its superior stability in CO 2 containing atmospheres. Finally, the best catalyst coatings demonstrated in this project, BCO and PBCC, were applied to full cells which demonstrated superior stability for over 300 hours in CO 2 and Cr atmospheres

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

Tower Water-Vapor Mixing Ratio Value-Added Product Report

The purpose of the Tower Water-Vapor Mixing Ratio (TWRMR) value-added product (VAP) is to calculate water-vapor mixing ratios at the 25-meter and 60-meter levels of the meteorological tower and also report best-estimate temperature, relative humidity, and pressure measurements at the 2-meter, 25-meter, and 60-meter levels at the Atmospheric Radiation Measurement (ARM) user facility Southern Great Plains (SGP) Central Facility. Because there are no barometric pressure sensors at the 25-meter and 60-meter levels on the tower, the hypsometric equation is used along with surface pressure values from the surface meteorological instrumentation (MET), the surface meteorological observation system (SMOS), or the temperature, humidity, wind, and pressure system (THWAPS) to derive barometric pressures at those altitudes (Ritsche 2008, 2011a, 2011b). After this is done, water-vapor mixing ratio can be calculated directly.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Arctic Ice Nucleation Sampling during MOSAiC (INPMOSAIC2) Field Campaign Report

The accelerated rate of warming in the Arctic is of great concern due to potential impacts that include release of greenhouse gases from permafrost, melting glacial ice contributing to sea level rise, and declining sea ice cover exposing the darker ocean surface. These processes induce positive feedbacks and contribute to further warming that affects climate globally. Clouds play a crucial role in regulating the energy reaching the sea ice and snow surfaces, but the magnitude of their effects on surface temperature is not well constrained in the Arctic. Aerosols are an important contributor by serving as seeds for cloud particle formation, but even less is known about their overall impact and origin. In particular, aerosols that serve as ice nucleating particles (INPs) are vastly understudied, especially above the central Arctic Ocean. However, INPs likely play a significant role in arctic mixed-phase cloud (AMPC) microphysics and the resulting impacts of such clouds on the surface energy budget over the sea ice.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Satellite-based Investigation of Power-Line Vegetation Encroachment in the US (SILVANUS)

Rapid wide-area assessments of vegetation encroachment on transmission and distribution line rights-of-way (ROW) is a highly desirable capability for understanding risks to the power grid during severe weather and wildfire events. Conventional assessments are time-consuming and expensive due to the need for in-situ inspections and the use of aerial assets. Performing conventional assessments on a wide area would require immense resources and time that might not be available within the horizon of an expected adverse event. Developing a capability to accurately assess vegetation encroachment into ROWs will enable faster analysis of potential grid vulnerabilities in NAERM. This project sought to develop a prototype capability for rapid ROW vegetation encroachment assessments by using Puerto Rico as a test case. Puerto Rico is a heavily forested island territory frequently impacted by tropical cyclones that threaten the electric grid by downing trees across transmission and distribution lines. Multispectral satellite imagery (MSI) enable very high resolution (i.e., 0.5 - 2 meter) assessment of vegetation conditions at scale and with revisit times appropriate for regular monitoring (e.g., weekly to quarterly, depending on cloud cover) of the entire island. Synthetic aperture radar (SAR) data from satellites was also investigated as solution to the cloud-cover issue as they are active sensors that emit and receive a microwave signal rather than relying on solar illumination, and are therefore unaffected by cloud cover and can collect data during day or night. Finally, MSI-derived digital surface models (DSMs) map the height of objects relative to sea level, and were assessed for their ability to estimate the height of forest canopies relative to coincident transmission lines. The results of the mapping investigation are described in this report.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2022

Intraspecific Variation for Leaf Physiological and Root Morphological Adaptation to Drought Stress in Alfalfa ( Medicago sativa L.)

Drought stress reduces crop biomass yield and the profitability of rainfed agricultural systems. Evaluation of populations or accessions adapted to diverse geographical and agro-climatic environments sheds light on beneficial plant responses to enhance and optimize yield in resource-limited environments. This study used the morphological and physiological characteristics of leaves and roots from two different alfalfa subspecies during progressive drought stress imposed on controlled and field conditions. Two different soils (Experiments 1 and 2) imposed water stress at different stress intensities and crop stages in the controlled environment. Algorithm-based image analysis of leaves and root systems revealed key morphological and physiological traits associated with biomass yield under stress. The Medicago sativa subspecies (ssp.) sativa population, PI478573, had smaller leaves and maintained higher chlorophyll content (CC), leaf water potential, and osmotic potential under water stress. In contrast, M. sativa ssp. varia, PI502521, had larger leaves, a robust root system, and more biomass yield. In the field study, an unmanned aerial vehicle survey revealed PI502521 to have a higher normalized difference vegetation index (vegetation cover and plant health characteristics) throughout the cropping season, whereas PI478573 values were low during the hot summer and yielded low biomass in both irrigated and rainfed treatments. RhizoVision Explorer image analysis of excavated roots revealed a smaller diameter and a narrow root angle as target traits to increase alfalfa biomass yield irrespective of water availability. Root architectural traits such as network area, solidity, volume, surface area, and maximum radius exhibited significant variation at the genotype level only under limited water availability. Different drought-adaptive strategies identified across subspecies populations will benefit the plant under varying levels of water limitation and facilitate the development of alfalfa cultivars suitable across a broad range of growing conditions. The alleles from both subspecies will enable the development of drought-tolerant alfalfa with enhanced productivity under limited water availability.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Subsurface hydrological controls on the short-term effects of hurricanes on nitrate–nitrogen runoff loading: a case study of Hurricane Ida using the Energy Exascale Earth System Model (E3SM) Land Model (v2.1)

When the nutrient level in the soil surpasses vegetation demand, nutrient losses due to surface runoff and subsurface leaching are the major reasons for the deterioration of water quality. The lower Mississippi River basin (LMRB) is one of the sub-basins that deliver the highest nitrogen loads to the Gulf of Mexico. Potential changes in episodic events induced by hurricanes may exacerbate water quality issue in the future. However, uncertainties in modeling the hydrologic response to hurricanes may limit the modeling of nutrient losses during such events. Using a machine learning approach, we calibrated the land component of the Energy Exascale Earth System Model (E3SM), or ELM, version 2.1, based on the water table depth (WTD) of a calibrated 3D subsurface hydrology model. While the overall performance of the calibrated ELM is satisfactory, some discrepancies in WTD remain in slope areas with low precipitation due to the missing lateral flow process in ELM. Simulations including biogeochemistry performed using ELM with and without model calibration showed important influences of soil hydrology, precipitation intensity, and runoff parameterization on the magnitude of nitrogen runoff loss and the leaching pathway. Despite such sensitivities, both ELM simulations produced reduced WTD and increased runoff and accelerated nitrate–nitrogen runoff loading during Hurricane Ida in August 2021, consistent with the observations. With observations suggesting more pronounced effects of Hurricane Ida on nitrogen runoff than the simulations, we identified factors for model improvement to provide a useful tool for studying hurricane-induced nutrient losses in the LMRB region.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Ultrafast enhancement of electron-phonon coupling via dynamic quantum well states

Abstract The density of states at the Fermi surface controls many material properties by influencing the low-energy interactions of conductive electrons. Typically, external tuning knobs generate only small perturbations to the density of states in crystals, since their band structure depends strongly on the lattice potential. In contrast, quantum well states are contingent on a localized potential extrinsic to the crystal lattice and can be easily modified leading to changes in the density of states at the Fermi level. Here, we are able to control the quantum well potential on the surface of Bi 2 Se 3 with light, driving a density of states singularity below E F at ultrafast timescales, thereby triggering a reversible Lifshitz transition. We reveal a substantial ultrafast enhancement of the electron-phonon coupling with repercussions on the relaxation dynamics in the system. We argue that the relaxation dynamics are governed largely by the interplay of the dynamic density of states of the quantum wells with c -axis scattering from the $${A}_{{{{{{{{\rm{1g}}}}}}}}}^{2}$$ A 1g 2 optical phonon mode. These results demonstrate a powerful way to enhance electron-boson interaction on ultrafast timescales providing new avenues for controlling material properties and driving novel quantum phases of matter.

Ciocys, Samuel T.↗