Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “spin systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Blood Analyzer

In the 1970's, NASA provided funding for development of an automatic blood analyzer for Skylab at the Oak Ridge National Laboratory (ORNL). ORNL devised "dynamic loading," which employed a spinning rotor to load, transfer, and analyze blood samples by centrifugal processing. A refined, commercial version of the system was produced by ABAXIS and is marketed as portable ABAXIS MiniLab MCA. Used in a doctor's office, the equipment can perform 80 to 100 chemical blood tests on a single drop of blood and report results in five minutes. Further development is anticipated.

Source record↗
NASA NTRS2008

NASA Tech Briefs, March 2008

Topics covered include: WRATS Integrated Data Acquisition System; Breadboard Signal Processor for Arraying DSN Antennas; Digital Receiver Phase Meter; Split-Block Waveguide Polarization Twist for 220 to 325 GHz; Nano-Multiplication-Region Avalanche Photodiodes and Arrays; Tailored Asymmetry for Enhanced Coupling to WGM Resonators; Disabling CNT Electronic Devices by Use of Electron Beams; Conical Bearingless Motor/Generators; Integrated Force Method for Indeterminate Structures; Carbon-Nanotube-Based Electrodes for Biomedical Applications; Compact Directional Microwave Antenna for Localized Heating; Using Hyperspectral Imagery to Identify Turfgrass Stresses; Shaping Diffraction-Grating Grooves to Optimize Efficiency; Low-Light-Shift Cesium Fountain without Mechanical Shutters; Magnetic Compensation for Second-Order Doppler Shift in LITS; Nanostructures Exploit Hybrid-Polariton Resonances; Microfluidics, Chromatography, and Atomic-Force Microscopy; Model of Image Artifacts from Dust Particles; Pattern-Recognition System for Approaching a Known Target; Orchestrator Telemetry Processing Pipeline; Scheme for Quantum Computing Immune to Decoherence; Spin-Stabilized Microsatellites with Solar Concentrators; Phase Calibration of Antenna Arrays Aimed at Spacecraft; Ring Bus Architecture for a Solid-State Recorder; and Image Compression Algorithm Altered to Improve Stereo Ranging.

Source record↗
NASA NTRS2008

Parameter Estimation of Lateral Spacecraft Fuel Slosh

Predicting the effect of fuel slosh on the attitude control system of a spacecraft or launch vehicle is a very important and challenging task. Whether the spacecraft is spinning or moving laterally, the dynamic effect of the fuel slosh helps determine whether the spacecraft will remain on its intended trajectory. Three categories of slosh can be caused by launch vehicle or spacecraft maneuvers when the fuel is in the presence of an acceleration field. These are bulk-fluid motion, subsurface wave motion (currents), and free-surface slosh. Each of these slosh types has a periodic component defined by either a spinning or a lateral motion. For spinning spacecraft, all three types of slosh can greatly affect stability. Bulk-fluid motion and free-surface slosh can affect the lateral-slosh characteristics. For either condition, an unpredicted coupled resonance between the spacecraft and its onboard fuel could threaten a mission. This ongoing research effort seeks to improve the accuracy and efficiency of modeling techniques used to predict these types of fluid motions for lateral motion. Particular efforts focus on analyzing the effects of viscoelastic diaphragms on slosh dynamics.

Sudermann, James E.↗
NASA NTRS2015

Precision Closed-Loop Orbital Maneuvering System Design and Performance for the Magnetospheric Multi-Scale Mission (MMS) Formation

NASA's Magnetospheric Multi-Scale (MMS) mission successfully launched on March 13, 2015 (UTC) consists of four identically instrumented spin-stabilized observatories that function as a constellation to study magnetic reconnection in space. The need to maintain sufficiently accurate spatial and temporal formation resolution of the observatories must be balanced against the logistical constraints of executing overly-frequent maneuvers on a small fleet of spacecraft. These two considerations make for an extremely challenging maneuver design problem. This paper focuses on the design elements of a 6-DOF spacecraft attitude control and maneuvering system capable of delivering the high-precision adjustments required by the constellation designers---specifically, the design, implementation, and on-orbit performance of the closed-loop formation-class maneuvers that include initialization, maintenance, and re-sizing. The maneuvering control system flown on MMS utilizes a micro-gravity resolution accelerometer sampled at a high rate in order to achieve closed-loop velocity tracking of an inertial target with arc-minute directional and millimeter-per-second magnitude accuracy. This paper summarizes the techniques used for correcting bias drift, sensor-head offsets, and centripetal aliasing in the acceleration measurements. It also discusses the on-board pre-maneuver calibration and compensation algorithms as well as the implementation of the post-maneuver attitude adjustments.

Determination and Control↗
NASA NTRS2001

Design of the Thermal Control System for the Space Technology 5 Microsatellite

The New Millennium Program's (NMP) Space Technology 5 (ST-5) Project, currently in Phase B of the design process, is slated to launch three 20-kg class spin stabilized microsatellites in late 2003. The proposed orbit is highly elliptical and could result in an earth shadow eclipse of almost 2 hours. Although ST-5's maximum eclipse is only 2 hours, future missions could involve eclipses as long as 8 hours. As spacecraft size, mass, and available resources decrease and eclipse duration increases, thermal engineers will be challenged to design simple but robust thermal control systems that meet temperature requirements for all phases of the mission. This paper presents the results of a study of three design concepts and preliminary analysis of the design selected for ST-5.

Douglas, Donya↗
NASA NTRS1993

Laser ranging application to time transfer using geodetic satellite and to other Japanese space programs

Communications Research Laboratory (CRL) has been developing a laser time transfer system using a satellite laser ranging (SLR) system. We propose Japanese geodetic satellite 'AJISAI', launched in 1986 as a target satellite. The surface is covered not only with corner cube reflectors but also with mirrors. The mirrors are originally designed for observation of flushing solar light reflected by the separate mirrors while the satellite is spinning. In the experiment, synchronized laser pulses are transferred via specified mirror from one station to another while the satellite is up on the horizon to both stations. The system is based on the epoch timing ranging system with 40 ps ranging precision, connected together with UTC(CRL). Simulation study indicates that two stations at thousands of km distance from each other can be linked with signal strength of more than 10 photons and the distributed images of laser beam from AJISAI mirrors give many chances for two stations to link each other during a single AJISAI pass. Retro-reflector In Space for Advanced Earth Observation Satellite (ADEOS) and RendDezVous docking mission of Experimental Technology Satellite-7 (ETS-7) are briefly presented.

Kunimori, Hiroo↗
NASA NTRS1998

Tether Transportation System Study

The projected traffic to geostationary earth orbit (GEO) is expected to increase over the next few decades. At the same time, the cost of delivering payloads from the Earth's surface to low earth orbit (LEO) is projected to decrease, thanks in part to the Reusable Launch Vehicle (RLV). A comparable reduction in the cost of delivering payloads from LEO to GEO is sought. The use of in-space tethers, eliminating the requirement for traditional chemical upper stages and thereby reducing the launch mass, has been identified as such an alternative. Spinning tethers are excellent kinetic energy storage devices for providing the large delta vee's required for LEO to GEO transfer. A single-stage system for transferring payloads from LEO to GEO was proposed some years ago. The study results presented here contain the first detailed analyses of this proposal, its extension to a two-stage system, and the likely implementation of the operational system.

Bangham, M. E.↗
NASA NTRS2011

Suzaku Observations of the Ultracompact Binary System 4U1626-67

The accretion-powered pulsar 4U1626-67 experienced a new torque reversal at the beginning of 2008, after about 18 years of steadily spinning down. We present a spectral analysis of this source using two pointed observations performed by Suzaku in 2006 March and in 2010 September. We confirm with Suzaku the presence of a strong emission-line complex centered on 1 keV, with the strongest line being the hydrogen-like Ne Ly- alpha at 1.025(1.5) keV. We were able to resolve this complex with up to eight emission lines. A dramatic increase of the equivalent width of the Ne Ly-alpha 1.021 keV after the 2008 torque reversal occurred, reaching almost the same value measured by ASCA in 1993. In addition, we confirm the general decrease trend of the equivalent widths during the spin-down period. We also report on the detection of a cyclotron line feature centered at approx 37 keV. In spite of the fact that a dramatic increase of the X-ray luminosity (0.5-100 keV) of a factor of approx 3.5 occurred between these two observations, no significant change in the energy of the cyclotron line feature was observed. However, the intensity of the approx 1 keV line complex increased by an overall factor of approx 10.

Camero-Arranz, A.↗
NASA NTRS1982

Parachute suspended solar pointing control system

A high altitude parachute suspended solar pointing control system has been developed and flight tested for use in the altitude range of 30 to 70 kilometers. This development provides an opportunity for extended solar observations at altitudes higher than that attainable by helium balloons. The new system utilizes the NASA high altitude cross parachute to slow the descent of a rocket launched payload allowing observations in the region of interest. Solar pointing is established by using solar sensors in conjunction with a servo controlled platform and cold gas thrusters for payload roll control. The inherent spin of the cross parachute is decoupled by a swivel joint attached to the parachute suspension lines. This paper describes the design, test and flight performance of the new system.

Sakoda, G. T.↗
NASA NTRS1995

The Effect of Propellant Variables on Slag in Subscale Spin Motors: Design and Qualification of a Slag Discrimination Motor - Part 1

The formation, collection, and expulsion of aluminum oxide slag is known to affect the performance of many solid rocket motor systems. Slag expulsion, in particular, is believed to be capable of causing pressure and thrust perturbations. Propellant combustion studies, performed and documented by many investigators, have shown that variations in propellant raw materials and processing affect the nature of alumina droplets at the burning propellant surface, and hence, may affect the quantity of slag retained in the motor chamber, available for expulsion. Thiokol has completed an experimental and analytical evaluation to determine the effects of several material and process variables on Space SHuttle propellant and its propensity to 'slag'. This paper describes the test article, a small scale spin motor with special nozzle, designed and qualified as a slag discriminating tool for use in the evaluation.

Perkins, F. M.↗
NASA NTRS1994

Motion Tracking System

Integrated Sensors, Inc. (ISI), under NASA contract, developed a sensor system for controlling robot vehicles. This technology would enable a robot supply vehicle to automatically dock with Earth-orbiting satellites or the International Space Station. During the docking phase the ISI-developed sensor must sense the satellite's relative motion, then spin so the robot vehicle can adjust its motion to align with the satellite and slowly close until docking is completed. ISI used the sensing/tracking technology as the basis of its OPAD system, which simultaneously tracks an object's movement in six degrees of freedom. Applications include human limb motion analysis, assembly line position analysis and auto crash dummy motion analysis. The NASA technology is also the basis for Motion Analysis Workstation software, a package to simplify the video motion analysis process.

Source record↗
NASA NTRS1985

On-orbit attitude control of the Cosmic Background Explorer (COBE)

The way in which COBE (launched by the SS in late 1982) performs its attitude control is described, along with the design of its on-orbit system. COBE, to be situated in a 900 km high, sun-synchronous orbit, contains two unique control features: (1) the orientation of the spinning satellite is controlled to a sun-normal attitude in the sun/local vertical plane; and (2) pitch and roll control is maintained by a unique triaxial arrangement of reaction wheels, magnetic torque bars and sensors, located in the body's tranverse plane. Inherent in this triaxial configuration concept is a built-in redundancy that will maintain attitude control in the event of any single-point sensor/actuator component failure. Each of the three control drive electronics operates independently and directly of a system of dedicated sensors. This system functions independently of a computer or an ephemeris communication link, leading to greater reliability.

Bramberg, B.↗
NASA NTRS1996

Baseline acoustic levels of the NASA Active Noise Control Fan rig

Extensive measurements of the spinning acoustic mode structure in the NASA 48 inch Active Noise Control Fan (ANCF) test rig have been taken. A continuously rotating microphone rake system with a least-squares data reduction technique was employed to measure these modes in the inlet and exhaust. Farfield directivity patterns in an anechoic environment were also measured at matched corrected rotor speeds. Several vane counts and spacings were tested over a range of rotor speeds. The Eversman finite element radiation code was run with the measured in-duct modes as input and the computed farfield results were compared to the experimentally measured directivity pattern. The experimental data show that inlet spinning mode measurements can be made very accurately. Exhaust mode measurements may have wake interference, but the least-squares reduction does a good job of rejecting the non-acoustic pressure. The Eversman radiation code accurately extrapolates the farfield levels and directivity pattern when all in-duct modes are included.

Sutliff, Daniel L.↗
NASA NTRS2019

High Efficiency Megawatt Machine Rotating Cryocooler Conceptual Design

Some of the challenges associated with developing electric aircraft propulsion systems include developing powertrain components that are both efficient and light-weight. In particular, electric motors must simultaneously achieve high efficiency by minimizing electrical and mechanical losses while also achieving high specific power by increasing the torque and/or speed. Normally increasing torque or speed will increase electrical and mechanical losses. The High Efficiency Megawatt Machine (HEMM) minimizes electrical losses by incorporating a superconductor to enable increased current on the rotor. And the rotor spins in a vacuum to minimize thermal and mechanical losses. Some organizations have been developing superconducting rotors for similar reasons using either cryogenic fluid transfer systems, fully immersed cryogenic cooling, and in a few cases utilized built-in cryogenic cooling on the rotor using a Brayton or Stirling system but the implementation was too large or inefficient for effective motor integration. Instead, a new approach for cryogenically cooling the superconducting rotor coil with an embedded rotating cryocooler is presented that fits completely within the rotating shaft.

Dyson, Rodger W.↗
NASA NTRS2019

High Efficiency Megawatt Machine Rotating Cryocooler Conceptual Design

Some of the challenges associated with developing electric aircraft propulsion systems include developing powertrain components that are both efficient and light-weight. In particular, electric motors must simultaneously achieve high efficiency by minimizing electrical and mechanical losses while also achieving high specific power by increasing the torque and/or speed. Normally increasing torque or speed will increase electrical and mechanical losses. The High Efficiency Megawatt Machine (HEMM) minimizes electrical losses by incorporating a superconductor to enable increased current on the rotor. And the rotor spins in a vacuum to minimize thermal and mechanical losses. Some organizations have been developing superconducting rotors for similar reasons using either cryogenic fluid transfer systems, fully immersed cryogenic cooling, and in a few cases utilized built-in cryogenic cooling on the rotor using a Brayton or Stirling system but the implementation was too large or inefficient for effective motor integration. Instead, a new approach for cryogenically cooling the superconducting rotor coil with an embedded rotating cryocooler is presented that fits completely within the rotating shaft.

Dyson, Rodger W.↗
NASA NTRS1974

Testing a satellite automatic nutation control system

Testing of a particular nutation control system for the synchronous meteorological satellite (SMS) is described. The test method and principles are applicable to nutation angle control for other satellites with similar requirements. During its ascent to synchronous orbit, a spacecraft like the SMS spins about its minimum-moment-of-inertia axis. An uncontrolled spacecraft in this state is unstable because torques due to fuel motion increase the nutation angle. However, the SMS is equipped with an automatic nutation control (ANC) system which will keep the nutation angle close to zero. Because correct operation of this system is critical to mission success, it was tested on an air-bearing table. The ANC system was mounted on the three-axis air-bearing table which was scaled to the SMS and equipped with appropriate sensors and thrusters. The table was spun up in an altitude chamber and nutation induced so that table motion simulated spacecraft motion. The ANC system was used to reduce the nutation angle. This dynamic test of the ANC system met all its objectives and provided confidence that the ANC system will control the SMS nutation angle.

Hrasiar, J. A.↗
NASA NTRS1982

Reflectance spectroscopy of diogenite meteorite types from Antarctica and their relationship to asteroids

Measurements of the spectral reflectance (0.4-2.5 microns) of three diogenite meteorites found in Antarctica are examined. Comparisons are made with previous measurements of diogenites in order to correlate the mineralogy and petrography with the spectral characteristics that can also be measured on solar system objects of unknown composition. Even though the Antarctic diogenites have the same spectral characteristics as other diogenites, there are measurable differences between all diogenite spectra. Bands caused by spin-forbidden transitions of Fe(2+) ions in pyroxene, which are identified for the first time in reflectance spectra of powdered samples, are revealed in an analysis of the spectra into sums of Gaussian components. It is shown from these laboratory measurements that spectral reflectance measurements of asteroids and other solar system objects made with the visible CVF (circular variable filter) spectrometer used for laboratory measurements can provide useful information on their surface composition.

Mcfadden, L. A.↗
NASA NTRS1972

Dynamics of a spinning space station with a counterweight connected by multiple cables.

A unique and relatively simple approach is presented for obtaining the linearized equations of motion. A conservative system consisting of two rigid bodies connected by any number of massless cables with linear axial stiffness is assumed. The cable forces and torques are expanded in a Taylor series about the equilibrium values of the system coordinates which results in a cable stiffness matrix. The method of obtaining the equilibrium values of the coordinates is discussed and results are presented. The range of validity of the linear model is determined by comparing results with a digital simulation of the nonlinear system.

Nixon, D. D.↗