Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solar constant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

The equilibrium and stability of the gaseous component of the galaxy, 1

The distribution of gas satisfying hydrostatic and Poisson conditions with distance above the galactic plane is derived and compared with Schmidt's observations of the gas density, rho sub g (z). Equipartition magnetic and cosmic ray (Pc-r) components are assumed. The gas density is calculated for two limiting cases: (1) the total mass density at the galactic plane is equal to the sum of the observed gas and star densities in the solar neighborhood, and (2) Oort's data on the z component of the galactic gravitational acceleration are used. The rms z turbulent gas velocity dispersion is found. An expression is derived for the half-thickness of the equilibrium disk of galactic gas. Using the Innanen galactic mass model, the half-thickness is computed as a function of distance from the galactic center over the range 4kpc or = R or = 14kpc and compared to the observations of McGee and Milton. The observed increase in half-thickness at distances beyond the solar distance is reproduced theoretically. A galactic mass model is derived, using the observed layer half-width and constant value for Q.

Kellman, S. A.↗

A representation of Jacchia's thermospheric models in spherical harmonic functions

The Jacchia models are represented in terms of spherical harmonic functions. This representation has the advantage of ease of comparison with other global theoretical and empirical models that use this mathematical form. Furthermore, it is analytic, continuous, and has continuous derivatives all over the globe. The representation of the exospheric temperatures shows clearly the amplitudes of the various periodic terms and uses relatively few constants. An example of a similar representation for the total mass density at a particular height and level of solar activity is given as well.

Blum, P.↗

The rotation curve of NGC 3115

A rotation curve is derived for the S0 galaxy NGC 3115 from its absorption-line spectrum. The central velocity is 728 (+ or - 9) km/sec. The rotation curve rises to 260 km/sec at 25 arc sec from the nucleus, and remains constant at that value to the limit of the measurements. A rough computation of the mass gives 24 billion solar masses out to 3.4 kpc, and a mass-to-light ratio of 20 to the same radius.

Williams, T. B.↗

Thermal performance of a hot-air solar collector

Report contains procedures and results of thermal-performance tests on double-glazed air solar collector. Four types of tests were carried out including thermal-efficiency and stagnation tests, collector time-constant tests to assess effects of transients, and incident-angle modifier tests. Data are presented in tables and as graphs and are discussed and analyzed.

Source record↗

Orbit design for solar and dual satellite occultation measurements of atmospheric constituents

Two types of satellite-based occultation missions are considered for measuring atmospheric constituents. Nominal cases for each type are presented to demonstrate representative solutions to orbit design problems. For the solar occultation mode, large areas of the globe can be covered during a 1-year mission, but the measurements are limited to local dawn or dusk. For the dual satellite mode, with a laser aboard a second satellite to act as a source, diurnal coverage can be obtained at the expense of more complex systems and mission scenarios. In this mode, orbit pairs are selected which maintain their relative orbit plane geometry while their differing periods drive cyclic patterns of latitude coverage. A simulated 1-year solar occultation mission is used to illustrate one way of analyzing occultation data by averaging measurements within bands of constant latitude.

Brooks, D. R.↗

Orbit design for solar and dual satellite occultation measurements of atmospheric constituents

Two types of satellite based occultation missions are considered for measuring atmospheric constituents. Nominal cases for each type are presented to demonstrate representative solutions to orbit design problems. For the solar occultation mode, large areas of the globe can be covered during a one year mission, but the measurements are limited to local dawn or dusk. For the dual satellite mode, with a laser aboard a second satellite to act as a source, diurnal coverage can be obtained at the expense of more complex systems and mission scenarios. In this mode, orbit pairs are selected which maintain their relative orbit plane geometry while their differing periods drive cyclic patterns of latitude coverage. A simulated one year solar occultation mission is used to illustrate one way of analyzing occultation data by averaging measurements within bands of constant latitude.

Brooks, D. R.↗

Electron heating of inflowing interstellar gas

The heating of inflowing interstellar gas by solar electrons is calculated. In the present work it is assumed that the thermal energy of the electrons is constant with distance from the Sun and that the inflowing gas follows Keplerian trajectories, and the contours of constant temperature so obtained are given. At a heliocentric distance of 1 AU the estimated temperature is 500 K upwind and 2000 K downwind for hydrogen atoms, and is 240 K downwind and 100 K upwind for helium.

Wu, F.-M.↗

IUE monitoring of the spatial distribution of the H Ly-alpha emission from Jupiter

North-south spatial maps of the Jovian H Lyman-alpha emission observed with the IUE satellite support the identification of a marked longitudinal asymmetry in the equatorial brightness, with the peak around lambda III(1965) = 50-100 deg longitude, and show a weaker planet-wide equatorial brightening above the level predicted by a plane-parallel layer model. IUE observations made 18 months after the initial discovery of the localized emission bulge establish that it is fixed with respect to Jupiter's magnetic longitude (lambda III system) and not with respect to atmospheric longitude (lambda II system). In addition, a decrease in brightness of 20% in the region of the emission bulge has been observed over a one yr interval, while the rest of the planet remained roughly constant in brightness. This decrease is more than would be expected as a result of changes in the incident solar Lyman-alpha flux, indicating a real decrease in reflectivity in this region of Jupiter's upper atmosphere.

Clarke, J. T.↗

Torque equilibrium attitudes for the Space Station

All spacecraft orbiting in a low earth orbit (LEO) experience external torques due to environmental effects. Examples of these torques include those induced by aerodynamic, gravity-gradient, and solar forces. It is the gravity-gradient and aerodynamic torques that produce the greatest disturbances to the attitude of a spacecraft in LEO, and large asymmetric spacecraft, such as the space station, are affected to a greater degree because the magnitude of the torques will, in general, be larger in proportion to the moments of inertia. If left unchecked, these torques would cause the attitude of the space station to oscillate in a complex manner and the resulting motion would destroy the micro-gravity environment as well as prohibit the orbiter from docking. The application of control torques will maintain the proper attitude, but the controllers have limited momentum capacity. When any controller reaches its limit, propellant must then be used while the device is reset to a zero or negatively-biased momentum state. Consequently, the rate at which momentum is accumulated is a significant factor in the amount of propellant used and the frequency of resupply necessary to operate the station. A torque profile in which the area curve for a positive torque is not equal to the area under the curve for a negative torque is 'biased,' and the consequent momentum build-up about that axis is defined as secular momentum because it continues to grow with time. Conversely, when the areas are equal, the momentum is cyclic and bounded. A Torque Equilibrium Attitude (TEA) is thus defined as an attitude at which the external torques 'balance' each other as much as possible, and which will result in lower momentum growth in the controllers. Ideally, the positive and negative external moments experienced by a spacecraft at the TEA would exactly cancel each other out and small cyclic control torques would be required only for precise attitude control. Over time, the only momentum build-up in the controllers would be due to electro-mechanical losses within the device. However, the atmospheric torques are proportional to the density of the atmosphere and the density varies with the orbital position, time of day, time of year, and the solar cycle. In addition, there are unmodeled disturbances and uncertainties in the mass and inertias. Therefore, there is no constant attitude that will completely balance the environmental torques and the dynamic TEA cannot be solved in closed form. The objective of this research was to determine a method to calculate a dynamic TEA such that the rate of momentum build-up in the controllers would be minimized and to implement this method in the MATRIX(x) simulation software by Integrated Systems, Inc.

Thompson, Roger C.↗

Electric Propulsion for Low Earth Orbit Communication Satellites

Electric propulsion was evaluated for orbit insertion, satellite positioning and de-orbit applications on big (hundreds of kilograms) and little (tens of kilograms) low earth orbit communication satellite constellations. A simple, constant circumferential thrusting method was used. This technique eliminates the complex guidance and control required when shading of the solar arrays must be considered. Power for propulsion was assumed to come from the existing payload power. Since the low masses of these satellites enable multiple spacecraft per launch, the ability to add spacecraft to a given launch was used as a figure of merit. When compared to chemical propulsion ammonia resistojets, ion, Hall, and pulsed plasma thrusters allowed an additional spacecraft per launch Typical orbit insertion and de-orbit times were found to range from a few days to a few months.

Oleson, Steven R.↗

Nm-scale electrical resistance imaging on CdTe by scanning spreading resistance microscopy

Local resistance imaging can provide information on nm-scale carrier distribution in semiconductor devices. Scanning spreading resistance microscopy (SSRM), an atomic force microscopy-based nm-scale resistance mapping technique, has been developed for carrier delineation in Si microdevices. We report on the development and validation of SSRM on CdTe materials, by testing on molecular beam epitaxy (MBE) grown CdTe films. The probe/CdTe contact resistance was suppressed sufficiently below sample's spreading resistance by pressing the probe into the sample with ∼mN contact force and applying a large sample/probe forward bias voltage (V s ), which was understood by analyzing current-voltage (I-V) involving a serially connected insulating top layer with underlying spreading resistance. The carrier concentration as deduced from the resistance measurement, using a single mobility value, is consistent with Hall measurement with a standard deviation of 14% based on a set of MBE films with carrier concentrations in the range of 10 15 –10 16 /cm 3 . The doping polarity was readily identified by flipping V s polarity, where the resistance with reverse V s is orders of magnitude larger than forward V s . While focusing on the SSRM technique validation, we also show an example on an As-doped Cd(Se,Te) polycrystalline thin film of a high-performance CdTe solar cell, which illustrates the local resistance nonuniformity with up to two orders of magnitude differences, indicating if local mobility is roughly constant, local carrier concentration can have significant nonuniformity.

14 SOLAR ENERGY↗

TPSAS-NF1676L-32008-DND

Thermosphere climate is controlled in part by cooling to space driven by infrared radiation, primarily from nitric oxide (NO, 5.3μm) and carbon dioxide (CO2, 15μm). The Sounding of the Atmosphere using Broadband Emission Radiometry (SABER) instrument on the Thermosphere-Ionosphere-Mesosphere Energetics and Dynamics (TIMED) satellite has been measuring the vertical distribution of infrared radiation emitted by these species (and others) for nearly 17 years-–more than 6000 days. This data set spans much of Solar Cycle (SC) 23 and all of SC 24 to date. A thermosphere climate index (TCI) has been derived by noting the correlation between 60-day running averages of NO cooling power and three long-term solar and geomagnetic indexes: F10.7 cm solar radio flux, the Ap index of geoeffective solar activity, and the disturbance storm time (Dst) index. A multiple linear regression (MLR) fit of these three parameters to the NO cooling rate over the SABER mission has a better than 0.98 correlation. Applying the MLR constant and coefficients from that fit provides a good estimate of thermospheric cooling back to 1947, the extent of the data available for all three indexes. We examined the percentile distribution of the TCI in quintiles over the five complete solar cycles, and assigned.

Linda Hunt↗

Interpretation of the X-ray spectra of solar active regions

This paper presents a review of recent analytical studies of the coronal X-ray spectrum below 25 A. The techniques used to compute the theoretical coronal spectrum, and the currently available atomic rate constant data are reviewed first. Spectroscopic techniques which have been proposed for the determination of coronal temperature and density structure, and the results derived from their application to coronal spectra are also reviewed. A number of coronal models based on X-ray observations have been developed recently, and the coronal temperature structure and composition predicted by these models is discussed, and compared with models of the corona and transition region derived from studies of the solar EUV spectrum.

Walker, A. B. C., Jr.↗

Infrared spectra and optical constants of astronomical ices: III. Propane, propylene, and propyne

Infrared (IR) spectra of the hydrocarbon ices C3H8 (propane), C3H6 (propylene, propene), and C3H4 (propyne, methylacetylene) are relevant to the study of the low-temperature chemistry and spectroscopy of objects within and beyond the Solar System, but IR band strengths and absorption coefficients are lacking for these compounds. Here we present new IR spectra of crystalline and non-crystalline forms of C3H8, C3H6, and C3H4. Measurements of ice density and refractive index also are reported, two quantities needed to compute IR absorption coefficients, band strengths, optical constants, and, ultimately, abundances of propane, propylene, and propyne in extraterrestrial environments and in laboratory experiments. Suggestions and interpretations are offered regarding the multiple crystalline forms of propane and propylene observed. Applications and extensions are described.

Reggie L. Hudson↗

Infrared Spectra and Optical Constants of Astronomical Ices: III. Propane, Propylene, and Propyne

Infrared (IR) spectra of the hydrocarbon ices C3H8 (propane), C3H6 (propylene, propene), and C3H4 (propyne, methylacetylene) are relevant to the study of the low-temperature chemistry and spectroscopy of objects within and beyond the Solar System, but IR band strengths and absorption coefficients are lacking for these compounds. Here we present new IR spectra of crystalline and non-crystalline forms of C3H8, C3H6, and C3H4. Measurements of ice density and refractive index also are reported, two quantities needed to compute IR absorption coefficients, band strengths, optical constants, and, ultimately, abundances of propane, propylene, and propyne in extraterrestrial environments and in laboratory experiments. Suggestions and interpretations are offered regarding the multiple crystalline forms of propane and propylene observed. Applications and extensions are described.

Ices↗

Infrared spectra and optical constants of astronomical ices: III. Propane, propylene, and propyne

Infrared (IR) spectra of the hydrocarbon ices C3H8 (propane), C3H6 (propylene, propene), and C3H4 (propyne, methylacetylene) are relevant to the study of the low-temperature chemistry and spectroscopy of objects within and beyond the Solar System, but IR band strengths and absorption coefficients are lacking for these compounds. Here we present new IR spectra of crystalline and non-crystalline forms of C3H8, C3H6, and C3H4. Measurements of ice density and refractive index also are reported, two quantities needed to compute IR absorption coefficients, band strengths, optical constants, and, ultimately, abundances of propane, propylene, and propyne in extrater-restrial environments and in laboratory experiments. Suggestions and interpretations are offered regarding the multiple crystalline forms of propane and propylene observed. Applications and extensions are described.

Reggie L. Hudson↗

Infrared Spectra and Optical Constants of Astronomical Ices: III. Propane, Propylene, and Propyne

Infrared (IR) spectra of the hydrocarbon ices C3H8 (propane), C3H6 (propylene, propene), and C3H4 (propyne, methylacetylene) are relevant to the study of the low-temperature chemistry and spectroscopy of objects within and beyond the Solar System, but IR band strengths and absorption coefficients are lacking for these compounds. Here we present new IR spectra of crystalline and non-crystalline forms of C3H8, C3H6, and C3H4. Measurements of ice density and refractive index also are reported, two quantities needed to compute IR absorption coefficients, band strengths, optical constants, and, ultimately, abundances of propane, propylene, and propyne in extraterrestrial environments and in laboratory experiments. Suggestions and interpretations are offered regarding the multiple crystalline forms of propane and propylene observed. Applications and extensions are described.

Reggie L Hudson↗

Deterministic fabrication of 3D/2D perovskite bilayer stacks for durable and efficient solar cells

Realizing solution-processed heterostructures is a long-enduring challenge in halide perovskites because of solvent incompatibilities that disrupt the underlying layer. By leveraging the solvent dielectric constant and Gutmann donor number, we could grow phase-pure two-dimensional (2D) halide perovskite stacks of the desired composition, thickness, and bandgap onto 3D perovskites without dissolving the underlying substrate. Characterization reveals a 3D–2D transition region of 20 nanometers mainly determined by the roughness of the bottom 3D layer. Thickness dependence of the 2D perovskite layer reveals the anticipated trends for n-i-p and p-i-n architectures, which is consistent with band alignment and carrier transport limits for 2D perovskites. Here we measured a photovoltaic efficiency of 24.5%, with exceptional stability of T 99 (time required to preserve 99% of initial photovoltaic efficiency) of >2000 hours, implying that the 3D/2D bilayer inherits the intrinsic durability of 2D perovskite without compromising efficiency.

14 SOLAR ENERGY↗