SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The degree of polarization of visible sunlight reflected from bare soils in agricultural test areas in the southwestern United States was measured by an airborne photopolarimeter. Surface soil specimens provided data concerning the surface moisture of the soil to which the polarization data were compared. The results indicate the feasibility of measuring soil surface moisture by airborne polarimeter instrumentation.
Model test results were used to define the failure mechanism associated with the static penetration resistance of cohesionless and low-cohesion soils. Knowledge of this mechanism has permitted the development of a new analytical method for calculating the ultimate penetration resistance which explicitly accounts for penetrometer base apex angle and roughness, soil friction angle, and the ratio of penetration depth to base width. Curves relating the bearing capacity factors to the soil friction angle are presented for failure in general shear. Strength parameters and penetrometer interaction properties of a fine sand were determined and used as the basis for prediction of the penetration resistance encountered by wedge, cone, and flat-ended penetrometers of different surface roughness using the proposed analytical method. Because of the close agreement between predicted values and values measured in laboratory tests, it appears possible to deduce in-situ soil strength parameters and their variation with depth from the results of static penetration tests.
The concentrations of the rare earth elements K, Rb, Sr, Ba, U, Zr, and Cr for the Luna 20 soil and four different Apollo 16 soils are reported. These trace element abundances imply: (1) that the lunar highlands consist of a mixture of rocks rich in large ion lithophile (LIL) elements and LIL-element improverished anorthosites; or (2) that the bulk of the aluminum-rich crust did not originate by upward segregation of plagioclase in a primitive liquid shell. The Luna 20 soil is distinguished from the Apollo 16 soil by lower aluminum and LIL element abundances.
Particle size characteristics are discussed together with particle types, abundances, variation in the soils, questions of soil maturity, coarse fines, and ropy glasses. It is found that agglutinates are formed primarily by micrometeorite impact into lunar soil. Agglutinates appear to be the major particle type now being formed on the lunar surface. Agglutinate content of a soil increases with particle track densities and with surface exposure time.
Comparison of the oxygen isotopic composition in the Luna 20 soil sample with the oxygen isotopic abundances of the Apollo 11, 12, 14, and 15 lunar soil samples. The Luna 20 soil is found to have a relatively low delta 0-18 content (0.57%) in comparison to the other lunar soils (0.58 to 0.63%).
As an extension of previous studies of radiation damage produced by heavy solar flare ions in lunar soils, high-voltage electron microscopy and electron diffraction procedures were used to rank a Luna 20 sample among the other soils returned by Soviet and American lunar missions. Micron-sized soil grains from the Luna 20 mission are the most lightly irradiated, in contrast to micron-sized grains from Luna 16 soil, which are the most heavily irradiated.
The author has identified the following significant results. Springtime ERTS-1 imagery covering pre-selected test sites in Iowa showed considerable detail with respect to broad soil and land use patterns. Additional imagery has been incorporated into a state mosaic. The mosaic was used as a base for soil association lines transferred from an existing map. The regions of greatest contrast are between the Clarion-Nicollet-Webster soil association area and adjacent areas. Landscape characteristics in this area result in land use patterns with a high percentage of pasture, hay, and timber. The soil association areas of the state that have patterns interpreted to be associated with intensive row crop production are: Moody, Galva-Primghar-Sac, Clarion-Nicollet-Webter, Tama-Muscatine, Dinsdale-Tama, Cresco-Lourdes, Clyde, Kenyon-Floyd-Clyde, and the Luton-Onawa-Salix area on the Missouri River floodplain. Forestland estimates have been attained for an area in central Iowa using wintertime ERTS-1 imagery. Visual analysis of multispectral, temporal imagery indicates that temporal analysis for cropland identification and acreage analyses procedures may be a very useful tool. Combinations of wintertime, springtime, and summertime ERTS-1 imagery separate most vegetation types. Timing can be critical depending upon crop development and harvesting times because of the dynamic nature of agricultural production.
ERTS-1 data, obtained during the period 25 August 1972 to 5 September 1973 over a range of test sites in the Central United States, have been used for identifying and mapping differences in soil patterns, species and conditions of cultivated crops, and conditions of rangelands. Multispectral scanner data from multiple ERTS passes over certain test sites have provided the opportunity to study temporal changes in the scene. Multispectral classifications delineating soils boundaries in different test sites compared well with existing soil association maps prepared by conventional means. Spectral analysis of ERTS data was used to identify, maps, and make areal measurements of wheat in western Kansas. Multispectral analysis of ERTS-1 data provided patterns in rangelands which can be related to soils differences, range management practices, and the extent of infestation of grasslands by mesquite (prosopis fuliflora) and juniper (juniperus spp.).
Substrates at the Apollo 15 and 16 sites were analyzed and showed essentially the same graphic mean, graphic standard deviation, and graphic skewness. The graphic kurtosis of Apollo 16 soils is slightly smaller than that of Apollo 15. In Apollo 15 soil samples, grain size and graphic standard deviation increase with depth, while the trend is reversed in Apollo 16 soil samples. Lower sphericity values for Apollo 15 samples coincide with concentrations of highly irregularly shaped glass particles. Two-dimensional sphericity of Apollo 15 samples is contoured as a function of particle size and depth below lunar surface. The results are consistent with an overall model for soil development in which samples closer to the surface are more mature in response to more prolonged reworking of meteorite impact.
The radioactivities of Ar-37, Ar-39, and H-3 measured at a number of depths for Apollo 16 and 17 soil are reported. The Ar-37 activities vs depth in the Apollo 16 drill string increased with depth and reached a broad maximum in the neighborhood of 50 g per sq cm before decreasing. The Ar-39 activities in Apollo 17 soil were higher than in Apollo 16 soil, probably owing to the higher Fe and Ti contents. The H-3 activities in Apollo 16 and 17 soil were quite similar and indicate that the 4 August 1972 flare produced very little H-3 compared to the amount produced by solar flares during the previous 50 years.
Soil moisture content was determined by extracting soil with methanol and subsequently analyzing the extract for water by gas chromatography. With air-dried mineral soils, this method gave slightly higher moisture content values than those obtained by the oven-dry method. Moisture content was determined quantitatively in soils to which various amounts of water had been added. The complete procedure, including extraction and analysis, requires less than one hour and gives results that closely compare to the oven-dry method.
The effect of soil moisture on the radar backscattering coefficient was investigated by measuring the 4- to 8-GHz spectral response from two types of bare-soil fields: slightly rough and very rough, in terms of the wavelength. An FM-CW radar system mounted atop a 75-ft truck-mounted boom was used to measure the return at ten frequency points across the 4- to 8-GHz band, at eight different look angles (0 through 70 deg), and for all polarization combinations. A total of 17 sets of data were collected covering the range from 4 to 36% soil moisture content by weight. The results indicate that the radar response to soil moisture content is highly dependent on the surface roughness, microwave frequency, and look angle. The response seems to be linear, however, over the range from 15 to 30% moisture content for all angles, frequencies, polarizations and surface conditions.
A Skylab experiment was designed to evaluate the feasibility of monitoring the moisture content of the soil from space. Data from various Skylab sensors were collected across two test sites while direct measurements of soil moisture were being made at the surface depths of soil. Correlations were obtained between the moisture content of the soil and radiometer sensors (S193 and S194) and the scatterometer instrument (S193). The high correlations obtained indicate that microwave sensors may be quite useful for such measurements in the future.-
A prototype penetrator instrument was impacted into a dry lake bed. Laboratory studies of the soil surrounding the penetrator revealed that the soil was contaminated by paint and metal from the penetrator's casing. Paint pigment rich in titanium and sulfur was found in the adjacent soil. The highly mobile paint pigment migrated onto viewing ports in the penetrator's exterior. Bulk analysis of the soil adjacent to the impactor showed a significant increase in both elements, as well as the presence of metal chips from the casing and nose cone. It is recommended that great care be taken in the use of coating materials and the metal alloys selected for the penetrator's exterior, or the accuracy of any experiment requiring an uncontaminated in situ sample may be adversely affected.
The bulk and trace element composition of five small samples from four rocks is remarkably similar. This result indicates that the metaclastic rocks studied are relatively uniform in their chemical composition. The elemental abundances found in the study are presented in two tables and the implications of the data are considered, giving attention to siderophiles, atmophile elements, and questions of element correlations. The 'dark mantle' valley soil 75081 at Camelot Crater is low in siderophiles. Since the soil is low in alkalis, a derivation from low-alkali mare basalt is suggested. The identical volatile contents in the surface soil 72461 and the 4 cm depth soil 72441 under a 0.7 m boulder argue against any surficial volatization by galactic and solar particles.
A method of extraction for amino acids from soils and sediments involving superheated water has been investigated. About 75-97 per cent of the amino acids contained in four soils of a soil profile from Illinois were extracted by this method. Deep penetration of water into soil aggregates and partial hydrolysis of peptide bonds during this extraction by water at high temperature are likely mechanisms responsible for the release of amino acids from samples. This extraction method does not require subsequent desalting treatments when analyses are carried out with an ion-exchange amino acid analyzer.
A lunar soil simulant was used in research on predicting the performance of the Lunar Roving Vehicle (LRV) on the moon. The simulant was prepared from ground basaltic rock whose grain size distribution was matched to the lunar soil samples collected by Apollo 11 and 12. The strength characteristics of the simulant, i.e., internal friction angle, cohesion, and cone penetration resistance, were tested in triaxial tests, trenching tests, and cone penetration resistance tests. Subsequent soil tests and LRV performance on the moon proved that the lunar soil strength characteristics could be successfully simulated.-
Polarimetric data concerning soil surface moisture were obtained during a series of flights over the Imperial Valley, California, and Phoenix, Arizona, during March 1972. A polarimeter was installed in NASA's Convair-990 aircraft, Galileo, above a window in the floor of the aft cargo compartment in such a manner that it could view from 42 deg ahead of, to 42 deg to the rear of the nadir. It had a 3 deg field of view and a 10 nm bandwidth centered at 641 nm. The moisture content of the solid surface for fields viewed by the polarimeter was measured by determining the angle through which the light had been scattered by the soil and by observing the degree of polarization of this light produced during its interaction with the soil. The polarimeter measures this degree of polarization in terms of Stokes parameters. Ground-truth samples of soil were obtained at several depths along the flight path.