Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “redox”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Electrochemical direct air capture of CO 2 using neutral red as reversible redox-active material

Direct air capture of carbon dioxide is a viable option for the mitigation of CO 2 emissions and their impact on global climate change. Conventional processes for carbon capture from ambient air require 230 to 800 kJ thermal per mole of CO 2 , which accounts for most of the total cost of capture. Here, we demonstrate electrochemical direct air capture using neutral red as a redox-active material in an aqueous solution enabled by the inclusion of nicotinamide as a hydrotropic solubilizing agent. The electrochemical system demonstrates a high electron utilization of 0.71 in a continuous flow cell with an estimated minimum work of 35 kJ e per mole of CO 2 from 15% CO 2 . Further exploration using ambient air (410 ppm CO 2 in the presence of 20% oxygen) as a feed gas shows electron utilization of 0.38 in a continuous flow cell to provide an estimated minimum work of 65 kJ e per mole of CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Coupling nitrate capture with ammonia production through bifunctional redox-electrodes

Abstract Nitrate is a ubiquitous aqueous pollutant from agricultural and industrial activities. At the same time, conversion of nitrate to ammonia provides an attractive solution for the coupled environmental and energy challenge underlying the nitrogen cycle, by valorizing a pollutant to a carbon-free energy carrier and essential chemical feedstock. Mass transport limitations are a key obstacle to the efficient conversion of nitrate to ammonia from water streams, due to the dilute concentration of nitrate. Here, we develop bifunctional electrodes that couple a nitrate-selective redox-electrosorbent (polyaniline) with an electrocatalyst (cobalt oxide) for nitrate to ammonium conversion. We demonstrate the synergistic reactive separation of nitrate through solely electrochemical control. Electrochemically-reversible nitrate uptake greater than 70 mg/g can be achieved, with electronic structure calculations and spectroscopic measurements providing insight into the underlying role of hydrogen bonding for nitrate selectivity. Using agricultural tile drainage water containing dilute nitrate (0.27 mM), we demonstrate that the bifunctional electrode can achieve a 8-fold up-concentration of nitrate, a 24-fold enhancement of ammonium production rate (108.1 ug h −1 cm −2 ), and a >10-fold enhancement in energy efficiency when compared to direct electrocatalysis in the dilute stream. Our study provides a generalized strategy for a fully electrified reaction-separation pathway for modular nitrate remediation and ammonia production.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Interplay between copper redox and transfer and support acidity and topology in low temperature NH 3 -SCR

Low-temperature standard NH 3 -SCR over copper-exchanged zeolite catalysts occurs on NH 3 -solvated Cu-ion active sites in a quasi-homogeneous manner. As key kinetically relevant reaction steps, the reaction intermediate Cu II (NH 3 ) 4 ion hydrolyzes to Cu II (OH)(NH 3 ) 3 ion to gain redox activity. The Cu II (OH)(NH 3 ) 3 ion also transfers between neighboring zeolite cages to form highly reactive reaction intermediates. Via operando electron paramagnetic resonance spectroscopy and SCR kinetic measurements and density functional theory calculations, we demonstrate here that such kinetically relevant steps become energetically more difficult with lower support Brønsted acid strength and density. Consequently, Cu/LTA displays lower Cu atomic efficiency than Cu/CHA and Cu/AEI, which can also be rationalized by considering differences in their support topology. By carrying out hydrothermal aging to eliminate support Brønsted acid sites, both Cu II (NH 3 ) 4 ion hydrolysis and Cu II (OH)(NH 3 ) 3 ion migration are hindered, leading to a marked decrease in Cu atomic efficiency for all catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Redox dynamics and surface structures of an active palladium catalyst during methane oxidation

Catalysts based on palladium are among the most effective in the complete oxidation of methane. Despite extensive studies and notable advances, the nature of their catalytically active species and conceivable structural dynamics remains only partially understood. Here, we combine operando transmission electron microscopy (TEM) with near-ambient pressure X-ray photoelectron spectroscopy (NAP-XPS) and density functional theory (DFT) calculations to investigate the active state and catalytic function of Pd nanoparticles (NPs) under methane oxidation conditions. We show that the particle size, phase composition and dynamics respond appreciably to changes in the gas-phase chemical potential. In combination with mass spectrometry (MS) conducted simultaneously with in situ observations, we uncover that the catalytically active state exhibits phase coexistence and oscillatory phase transitions between Pd and PdO. Aided by DFT calculations, we provide a rationale for the observed redox dynamics and demonstrate that the emergence of catalytic activity is related to the dynamic interplay between coexisting phases, with the resulting strained PdO having more favorable energetics for methane oxidation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Time-resolved chemically-selective spectroscopic investigation of the redox reaction between hematite and aluminium

Thermite reactions –highly energetic redox processes between a metal and an oxide—are used in welding, propulsion, and the fabrication of advanced materials. When reduced to the nanoscale, these reactions exhibit enhanced energetic performance, but their ultrafast dynamics remain poorly understood. Gaining insight into charge transfer during these processes is essential for advancing applications in energy conversion and materials design. Here we show that the reaction between aluminium and hematite, a common iron oxide, can be tracked with femtosecond resolution using extreme ultraviolet (EUV) time-resolved absorption spectroscopy at the Fe M 2,3 and Al L 2,3 edges. By exciting the system with an ultrashort optical pulse and probing element-specific absorption changes, we observe an early spectral shift that reveals the formation of localized charge carriers (polarons). Comparing samples with different supporting substrates highlights ultrafast electron transfer from aluminium to hematite. These results demonstrate an approach to investigating charge flow in energetic materials and provide a basis for studying fast chemical reactions with chemical specificity.

Electron transfer↗
DOE OSTI2022

In situ electrochemical recomposition of decomposed redox-active species in aqueous organic flow batteries

Aqueous organic redox flow batteries (AORFBs) offer a safe and potentially inexpensive solution to the problem of storing massive amounts of electricity produced from intermittent renewables. However, molecular decomposition is the major barrier preventing AORFBs from being commercialized. Structural modifications can improve molecular stability at the expense of increased synthetic cost and molecular weight. Utilizing 2,6-dihydroxy-anthraquinone (DHAQ), without further structural modification, we demonstrate that electrochemical regeneration could be a viable route to achieve low-cost, long-lifetime AORFBs. In situ (online) NMR and EPR and complementary electrochemical analyses reveal that decomposition compounds i.e., 2,6-dihydroxy-anthrone (DHA) and its tautomer, 2,6-dihydroxy-anthranol (DHAL), can be converted back to DHAQ in two steps: first DHA(L) 2- are oxidized to the dimer (DHA) 2 4- at - 0.32 V vs. SHE by one-electron transfer; subsequently, the (DHA) 2 4- is oxidized to DHAQ 2- at +0.57 V vs. SHE by three-electron transfer. Electrochemical regeneration rejuvenates not only DHAQ 2- , but also the positive electrolyte – rebalancing the states of charge of both electrolytes without introducing extra ions. We demonstrate the repeated capacity recovery with DHAQ | potassium ferro-/ferricyanide flow battery in basic conditions, and show the approach is also effective for anthraquinone-2,7-disulfonate in acid. Electrochemical regeneration strategies may extend the useful lifetime of many water-soluble organic molecules with anthraquinone core structures in electrochemical cells.

25 ENERGY STORAGE↗
DOE OSTI2020

High-power Mg batteries enabled by heterogeneous enolization redox chemistry and weakly coordinating electrolytes

Magnesium batteries have long been pursued as potentially low-cost, high-energy and safe alternatives to Li-ion batteries. However, Mg 2+ interacts strongly with electrolyte solutions and cathode materials, leading to sluggish ion dissociation and diffusion, and consequently low power output. Here we report a heterogeneous enolization chemistry involving carbonyl reduction (C=O ↔ C–O-), which bypasses the dissociation and diffusion difficulties, enabling fast and reversible redox processes. This kinetically favoured cathode is coupled with a tailored, weakly coordinating boron cluster-based electrolyte that allows for dendrite-free Mg plating/stripping at a current density of 20 mA cm -2 . The combination affords a Mg battery that delivers a specific power of up to 30.4 kW kg -1 , nearly two orders of magnitude higher than that of state-of-the-art Mg batteries. Here, the cathode and electrolyte chemistries elucidated here propel the development of magnesium batteries and would accelerate the adoption of this low-cost and safe battery technology.

25 ENERGY STORAGE↗
DOE OSTI2021

Symmetry-Breaking Design of an Organic Iron Complex Catholyte for a Long Cyclability Aqueous Organic Redox Flow Battery

The limited availability of a high-performance catholyte has hindered development of aqueous organic redox flow batteries (AORFB) that are environmentally benign, have tunable structures, and are safer than their traditional transition metal ion-based counterparts for large-scale energy storage. In this paper, a symmetry-breaking design of iron complexes with 2,2’-bipyridine-4,4’-dicarboxylic (Dcbpy) acid and cyanide ligands is described. By introducing two ligands to the metal center, the complex compounds (M4[FeII(Dcbpy)2(CN)2], M = Na, K) exhibited 4.2 times higher solubility (1.22 M, 33 Ah/L) and a 50% increase in potential compared with the widely used ferrocyanide. The symmetry-breaking, iron complex catholyte-based AORFBs were demonstrated at a concentration near the solubility limit (1.02 M Na4[FeII(Dcbpy)2(CN)2]) with a 1:1 catholyte:anolyte electron ratio. The AORFBs achieved a cell voltage of 1.2 V and a demonstrated energy density of 12.5 Wh/L. This symmetry-breaking design paves the way for development of metal complexes for high-energy-density AORFBs.

Li, Xiang↗
DOE OSTI2020

Voltage decay and redox asymmetry mitigation by reversible cation migration in lithium-rich layered oxide electrodes

Despite the high energy density of lithium-rich layered-oxide electrodes, their real-world implementation in batteries is hindered by the substantial voltage decay on cycling. This voltage decay is widely accepted to mainly originate from progressive structural rearrangements involving irreversible transition-metal migration. As prevention of this spontaneous cation migration has proven difficult, a paradigm shift toward management of its reversibility is needed. Herein, we demonstrate that the reversibility of the cation migration of lithium-rich nickel manganese oxides can be remarkably improved by altering the oxygen stacking sequences in the layered structure and thereby dramatically reducing the voltage decay. The preeminent intra-cycle reversibility of the cation migration is experimentally visualized, and first-principles calculations reveal that an O2-type structure restricts the movements of transition metals within the Li layer, which effectively streamlines the returning migration path of the transition metals. Furthermore, we propose that the enhanced reversibility mitigates the asymmetry of the anionic redox in conventional lithium-rich electrodes, promoting the high-potential anionic reduction, thereby reducing the subsequent voltage hysteresis. Our findings demonstrate that regulating the reversibility of the cation migration is a practical strategy to reduce voltage decay and hysteresis in lithium-rich layered materials.

25 ENERGY STORAGE↗
DOE OSTI2026

Revealing key structures for reversible sulfur redox in amorphous polymeric sulfur

Amorphous polymeric sulfur cathodes, such as sulfurized polyacrylonitrile (SPAN), enable high-energy lithium-sulfur batteries without cobalt or nickel, leveraging abundant sulfur. However, the limited in situ understanding of their synthesis and electrochemistry has impeded targeted optimization. Here, in this study, we integrate operando high-energy total scattering with sulfur K-edge X-ray absorption spectroscopy to monitor SPAN's formation and cycling in real time. Our results show that S-C bond formation halts further fusion of cyclized polyacrylonitrile, fostering π-π stacking and a transition from long-chain to short-chain sulfur-critical for reversible sulfur redox. These features synergistically minimize polysulfide dissolution and charge-transfer resistance, enabling optimized SPAN to achieve high capacity retention over 1,000 cycles. Operando X-ray absorption spectroscopy reveals that residual protons drive thiol-thione tautomerism, with lithium replacement during the first discharge causing ~20% irreversible capacity loss. To enhance performance, minimizing -NH groups and expanding pyridine networks are key. These findings transform SPAN optimization from empirical tuning to mechanism‑guided engineering and point the way towards sulfur loadings and energy densities competitive with state‑of‑the‑art Li‑ion cathodes.

25 ENERGY STORAGE↗
DOE OSTI2020

Theoretical insights into the surface physics and chemistry of redox-active oxides

Redox active oxides are ubiquitous in materials applications, including catalysis, photovoltaics, self-cleaning glasses, chemical sensors, and electronic components. Their utility derives from their unique ability to access multiple metal charge states within a finite energy window. However, this property also confounds our ability to study reducible oxides, because it leads to structural, compositional, and electronic complexities that elude simplistic models of materials structure and function. Oxygen vacancies play a critical role in shaping the functional properties of such oxides; most notably, they lead to mobile charge imbalances that impact surface processes at significant distances from the originating defect. Atomistic simulations are inherently equipped to illuminate these phenomena at a fundamental level; however, reducible oxides pose great challenges due to the high level of electron correlation needed to correctly describe them. Knowing how defects form, couple, propagate, agglomerate, or repel each other and influence the surface properties of reducible oxides is only now coming into the grasp of modern theory and simulation capabilities. This knowledge is also key to discovering and controlling emergent materials processes at nanometer scale and beyond. The manuscript was written with support of all three authors from U.S. Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences. Work by RR and VG was performed at Pacific Northwest National Laboratory (PNNL), which is a multi-program laboratory operated by Battelle for DOE under Contract DE AC05 76RL01830. AS was supported under Award DE-SC0007347.

Rousseau, Roger J.↗
DOE OSTI2025

U redox state tracked in mineralized hydrothermal carbonate with implications for U-Pb geochronology

U-Pb carbonate geochronology can directly constrain the timing and rates of important geological processes. However, the mechanisms and controls on U incorporation, distribution, and retention in carbonate minerals remain unclear, limiting geological interpretations. Here X-ray absorption spectroscopy (µXAS) and in-situ U-Pb carbonate geochronology are combined to temporally track U distribution and redox state in a porphyry-epithermal system. In this setting, multiple generations of carbonate minerals record fluid conditions and processes which control the solubility and deposition of metals, including U. This novel approach provides the first evidence of both oxidized UO 2 2+ and reduced U 4+ species in temporally distinct generations of carbonate within a single sample. Preservation of two different U oxidation states during discrete precipitation events requires U retentivity within older domains, demonstrating that the U-Pb carbonate geochronometer is robust under hydrothermal conditions. Furthermore, crystal zones with abundant fluid/vapour inclusions linked to boiling processes coincide with relatively high levels of U and favourable U/Pb. Targeting carbonate domains with these textures may therefore increase success in U-Pb geochronology. U-Pb carbonate dating combined with µXAS can track the temporal evolution of processes critical for metal deposition in long-lived and multistage hydrothermal-magmatic ore deposit settings.

58 GEOSCIENCES↗
DOE OSTI2020

One-electron redox kinetics of aqueous transition metal couples Zn 2+/+ , Co 2+/+ , and Ni 2+/+ using pulse radiolysis

The one-electron redox potentials for aqueous metal couples Co 2+/+ and Ni 2+/+ have been investigated by using pulse radiolysis using their reactions with a series of reference compounds to establish the most positive upper limits of E 0 . Experiments with Zn + were also carried out to confirm the characteristic shape of the expected reduction kinetics. Both formate ions and t-BuOH were employed to scavenge ˙OH radicals and ˙H atoms. Kinetics and fitted first and second order reaction rates have been reported for reactions with methyl viologen, fluorescein, Ru(NH 3 ) 6 3+ , Co(en) 3 2+ , Co(sepulcrate) 3+ , Ru(bpy) 3 2+ , Cr(bpy)33+, and Ni(Me 6 [14]4,11-dieneN4) 2+ . Previous work demonstrated that both Co 2+ and Ni 2+ can be reduced by CO 2 ˙- radicals, giving a negative E 0 limit of -1.9 V vs. SHE. A definite reaction of Ni + with fluorescein di-anions provides a new upper limit of the Ni 2+/+ couple as -0.906 V vs. SHE. The reaction of Co + with Ru(bpy) 3 2+ has been confirmed, giving E 0 = -1.3 V vs. SHE as a rigorous upper limit of the Co 2+/+ couple. In the case of Co 2+/+ , kinetics were complicated by a self-catalyzed metal clustering phenomenon. Initiation rate constants of this process have also been reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗