Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantum gates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Next-generation tunnel FETs: exploring material perspectives and areal tunneling configurations

The end of Dennard scaling, which facilitated proportional increases in computing power without added energy costs until the mid-2000s, has underscored the urgent need for innovative semiconductor devices that can enhance energy efficiency. Tunnel field-effect transistors (TFETs) have emerged as promising candidates to surpass the energy efficiency of conventional metal oxide semiconductor field-effect transistors (MOSFETs). Unlike MOSFETs, which rely on thermionic emission to overcome the source-channel potential barrier, TFETs operate through quantum tunneling, potentially enabling sub-60 mV dec −1 subthreshold swing (SS) for low-voltage operation. However, lateral TFETs have faced challenges in achieving adequate on-state current (I ON ) and a broad SS operation window, limiting their practical utility. This review article advocates for areal TFETs, which utilize face-to-face tunnel junctions that ideally offer step-function current turn-on characteristics and allow I ON to scale with device area rather than width. We highlight recent advancements in integrating 2D materials into tunneling structures, which could facilitate efficient band-to-band tunneling through atomically thin layers, while addressing challenges of gate field screening. We then discuss the nearer-term prospects of epitaxial areal TFETs comprising III–V compound semiconductors and group-IV semiconductors based on recent experimental progress. The review examines both quantum mechanical and semiclassical modeling approaches for TFETs, including techniques to reduce the computational complexity. The article delves into ongoing challenges in material synthesis, interface engineering, device fabrication, and integration pathways, concluding with recommendations for future research directions to overcome the fundamental power density limitations of conventional transistor technology.

2D materials↗
DOE OSTI2025

Q-Cluster: Quantum Error Mitigation Through Noise-Aware Unsupervised Learning

Quantum error mitigation (QEM) is critical in reducing the impact of noise in the pre-fault-tolerant era, and is expected to complement error correction in fault-tolerant quantum computing (FTQC). In this work, we propose a novel QEM approach, Q-Cluster, that uses unsupervised learning (clustering) to reshape the measured bit-string distribution. Our approach starts with a simplified bit-flip noise model. It first performs clustering on noisy measurement results, i.e., bit-strings, based on the Hamming distance. The centroid of each cluster is calculated using a qubit-wise majority vote. Next, the noisy distribution is adjusted with the clustering outcomes and the bitflip error rates using Bayesian inference. Our simulation results show that Q-Cluster can mitigate high noise rates (up to 40% per qubit) with the simple bit-flip noise model. However, real quantum computers do not fit such a simple noise model. To address the problem, we (a) apply Pauli twirling to tailor the complex noise channels to Pauli errors, and (b) employ a machine learning model, ExtraTrees regressor, to estimate an effective bit-flip error rate using a feature vector consisting of machine calibration data (gate & measurement error rates), circuit features (number of qubits, numbers of different types of gates, etc.) and the shape of the noisy distribution (entropy). Our experimental results show that our proposed Q-Cluster scheme improves the fidelity by a factor of 1.46x, on average, compared to the unmitigated output distribution, for a set of low-entropy benchmarks on five different IBM quantum machines. Our approach outperforms the state-of-art QEM approaches RZNE [28], M3 [24], Hammer [35], and QBEEP [33] by 1.26x,1.29x,1.47x, and 2.65 x, respectively.

42 ENGINEERING↗
DOE OSTI2022

Nuclear two point correlation functions on a quantum computer

The calculation of dynamic response functions is expected to be an early application benefiting from rapidly developing quantum hardware resources. The ability to calculate real-time quantities of strongly correlated quantum systems is one of the most exciting applications that can easily reach beyond the capabilities of traditional classical hardware. Response functions of fermionic systems at moderate momenta and energies corresponding roughly to the Fermi energy of the system are a potential early application because the relevant operators are nearly local, and the energies can be resolved in moderately short real time, reducing the spatial resolution and gate depth required. This is particularly the case in quasielastic electron and neutrino scattering from nuclei, a topic of great interest in the nuclear and particle physics communities and directly related to experiments designed to probe neutrino properties. In this paper we use current quantum hardware and error mitigation protocols to calculate response functions for a highly simplified nuclear model through calculations of a 2-point real time correlation function for a modified Fermi-Hubbard model in two dimensions with three distinguishable nucleons on four lattice sites.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Traversable wormhole dynamics on a quantum processor

The holographic principle, theorized to be a property of quantum gravity, postulates that the description of a volume of space can be encoded on a lower-dimensional boundary. The anti-de Sitter (AdS)/conformal field theory correspondence or duality is the principal example of holography. The Sachdev–Ye–Kitaev (SYK) model of N >> 1 Majorana fermions has features suggesting the existence of a gravitational dual in AdS 2 , and is a new realization of holography. Here, we invoke the holographic correspondence of the SYK many-body system and gravity to probe the conjectured ER=EPR relation between entanglement and spacetime geometry through the traversable wormhole mechanism as implemented in the SYK model. A qubit can be used to probe the SYK traversable wormhole dynamics through the corresponding teleportation protocol. This can be realized as a quantum circuit, equivalent to the gravitational picture in the semiclassical limit of an infinite number of qubits. Here we use learning techniques to construct a sparsified SYK model that we experimentally realize with 164 two-qubit gates on a nine-qubit circuit and observe the corresponding traversable wormhole dynamics. Despite its approximate nature, the sparsified SYK model preserves key properties of the traversable wormhole physics: perfect size winding, coupling on either side of the wormhole that is consistent with a negative energy shockwave, a Shapiro time delay, causal time-order of signals emerging from the wormhole, and scrambling and thermalization dynamics. Our experiment was run on the Google Sycamore processor. By interrogating a two-dimensional gravity dual system, our work represents a step towards a program for studying quantum gravity in the laboratory. Future developments will require improved hardware scalability and performance as well as theoretical developments including higher-dimensional quantum gravity duals and other SYK-like models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Simulating scalar field theories on quantum computers with limited resources

Here we present a quantum algorithm for implementing φ 4 lattice scalar field theory on qubit computers. The field is represented in the discretized field amplitude basis. The number of qubits and elementary gates required by the implementation of the evolution operator is proportional to the lattice size. The algorithm allows efficient φ 4 state preparation for a large range of input parameters in both the normal and broken-symmetry phases. The states are prepared using a combination of variational and adiabatic evolution methods. First, the ground state of a local Hamiltonian, which includes the φ 4 self-interaction, is prepared using short variational circuits. Next, this state is evolved by switching on the coupling between the lattice sites adiabatically. The parameters defining the local Hamiltonian are adjustable and constitute the input of our algorithm. We present a method to optimize these parameters in order to reduce the adiabatic time required for state preparation. For preparing broken-symmetry states, the adiabatic evolution problems caused by crossing the phase transition critical line and by the degeneracy of the broken-symmetry ground state can be addressed using an auxiliary external field which gradually turns off during the adiabatic process. We show that the time dependence of the external field during the adiabatic evolution is important for addressing the broken-symmetry ground state degeneracy. The adiabatic time dependence on the inverse error tolerance can be reduced from quadratic to linear by using a field strength that decreases exponentially in time relative to one that decreases linearly.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Quantum Zeno Control of Superconducting Qubit Coherence

The Quantum Zeno Effect (QZE) dictates how the dynamics of a quantum system can be modified through continuous or discrete measurements [1]. It has gained increasing attention in quantum computing community in recent years, both due to its inevitable implications for qubit readout as well as for its promise for enabling new methods of quantum state control such as reservoir engineering and Zeno-dragging. Here, we investigate Zeno effects implemented via weak measurements for controlling superconducting-qubit coherence during gate and readout operations in a multi-qubit setup. Building on prior observations [2] that measurement backaction can both suppress and enhance qubit relaxation, we predict and measure QZE-altered qubit coherence times by manipulating the spectral overlap of qubit spectrum with background noise sources. We also discuss modifications and opportunities for controllable QZE due to anharmonic effects in multi-level superconducting atoms. [1] S. Greenfield, A. Kamal, J. Dressel, E. Levenson-Falk, arXiv:2506.12679 (2025) [2] Thorbeck, Z. Xiao, L. Govia, A. Kamal, Phys. Rev. Lett. 132, 090602 (2024)

Seidel, Olivia [Texas U., Arlington; Fermilab]↗
NASA NTRS1989

Metal Film Increases CCD Quantum Efficiency

Thin layer of platinum or other high-work-function metal applied to back side of rear-illuminated charge-coupled device (CCD) achieves quantum efficiency (QE)-pinned state, an ideal condition allowing sensor to achieve 100-percent internal charge-collection efficiency within its photosensitive volume. Metal layer, called flash gate, easily applied by tungsten vacuum deposition during last step of sensor fabrication.

Janesick, James R.↗
DOE OSTI2025

Tunable reciprocal and nonreciprocal contributions to 1D Coulomb drag

Coulomb drag is a powerful tool to study interactions in coupled low-dimensional systems. Historically, Coulomb drag has been attributed to a frictional force arising from momentum transfer whose direction is dictated by the current flow. In the absence of electron-electron correlations, treating the Coulomb drag circuit as a rectifier of noise fluctuations yields similar conclusions about the reciprocal nature of Coulomb drag. In contrast, recent findings in one-dimensional systems have identified a nonreciprocal contribution to Coulomb drag that is independent of the current flow direction. In this work, we present Coulomb drag measurements between vertically coupled GaAs/AlGaAs quantum wires separated vertically by a hard barrier only 15 nm wide, where both reciprocal and nonreciprocal contributions to the drag signal are observed simultaneously, and whose relative magnitudes are temperature and gate tunable. Our study opens up the possibility of studying the physical mechanisms behind the onset of both Coulomb drag contributions simultaneously in a single device, ultimately leading to a better understanding of Luttinger liquids in multi-channel wires and paving the way for the creation of energy harvesting devices.

Coulomb Drag↗
DOE OSTI2022

Nanoscale studies of electric field effects on monolayer 1T′-WTe2

Abstract Monolayer 1 T′-WTe 2 is a quantum spin Hall insulator with a gapped 2D-bulk and gapless helical edge states persisting to temperatures ~100 K. Despite the far-ranging interest, the magnitude of the bulk gap, the effect of gating on the 2D-band structure, as well the role interactions are not established. In this work we use STM spectroscopy to measure the intrinsic bulk gap of monolayer 1 T′-WTe 2 and show that gate induced electric fields cause large changes of the gap magnitude. Our first-principles DFT-derived tight-binding model reveal that a combination of spatial localization of the conduction and valance bands and Rashba-like spin-orbit coupling leads to a gating induced spin-splitting of the 2D-bulk bands in the tens of meV, thereby reducing the band gap. Our work explains the large sensitivity of the band structure to electric fields and suggests a new avenue for realizing proximity induced non-trivial superconductivity in monolayer 1 T′-WTe 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2026

Arbitrary Polynomial Separations in Trainable Quantum Machine Learning

Recent theoretical results in quantum machine learning have demonstrated a general trade-off between the expressive power of quantum neural networks (QNNs) and their trainability; as a corollary of these results, practical exponential separations in expressive power over classical machine learning models are believed to be infeasible as such QNNs take a time to train that is exponential in the model size. We here circumvent these negative results by constructing a hierarchy of efficiently trainable QNNs that exhibit unconditionally provable, polynomial memory separations of arbitrary constant degree over classical neural networks—including state-of-the-art models, such as Transformers—in performing a classical sequence modeling task. This construction is also computationally efficient, as each unit cell of the introduced class of QNNs only has constant gate complexity. We show that contextuality—informally, a quantitative notion of semantic ambiguity—is the source of the expressivity separation, suggesting that other learning tasks with this property may be a natural setting for the use of quantum learning algorithms.

Anschuetz, Eric R. [California Institute of Techno↗
DOE OSTI2021

Detector thickness effects on nanosecond-gated imager response

Hybrid CMOS multi-frame imagers with exposure times down to ~2 ns have made significant impacts in high energy density physics and inertial confinement fusion research. The detector thickness is a key parameter in both detector quantum efficiency and temporal response. The Icarus hybrid CMOS imager has been fabricated with Si detector thicknesses of 8, 25, and 100 µm. The temporal response of imaging sensors with exposure time down to 2 ns has been examined and compared to directly measured photodiode current. The 100-μm thick variant displays extended features related to charge carrier collection and is more susceptible to field collapse. Here, we also demonstrate charge collection time effects on spatial response.

47 OTHER INSTRUMENTATION↗
NASA NTRS2001

2D Quantum Transport Modeling in Nanoscale MOSFETs

We have developed physical approximations and computer code capable of realistically simulating 2-D nanoscale transistors, using the non-equilibrium Green's function (NEGF) method. This is the most accurate full quantum model yet applied to 2-D device simulation. Open boundary conditions, oxide tunneling and phase-breaking scattering are treated on an equal footing. Electron bandstructure is treated within the anisotropic effective mass approximation. We present the results of our simulations of MIT 25 and 90 nm "well-tempered" MOSFETs and compare them to those of classical and quantum corrected models. The important feature of quantum model is smaller slope of Id-Vg curve and consequently higher threshold voltage. These results are consistent with 1D Schroedinger-Poisson calculations. The effect of gate length on gate-oxide leakage and subthreshold current has been studied. The shorter gate length device has an order of magnitude smaller leakage current than the longer gate length device without a significant trade-off in on-current.

Svizhenko, Alexei↗
NASA NTRS2001

Heavy ion induced soft breakdown of thin gate oxides

Heavy ion induced soft and hard breakdown are investigated in thin gate oxides as a function of LET, fluence, and voltage applied during irradiation. It is found that post-irradiation oxide conduction is well described by the Sune quantum point contact model.

radiation↗
DOE OSTI2025

Fast Sideband Control of a Weakly Coupled Multimode Bosonic Memory

Circuit quantum electrodynamics (cQED) with superconducting cavities coupled to nonlinear circuits like transmons offers a promising platform for hardware-efficient quantum information processing. We address critical challenges in realizing this architecture by weakening the dispersive coupling while also demonstrating fast, high-fidelity multimode control by dynamically amplifying gate speeds through transmon-mediated sideband interactions. This approach enables transmon-cavity SWAP gates, for which we achieve speeds up to 30 times larger than the bare dispersive coupling. Combined with transmon rotations, this allows for efficient, universal state preparation in a single cavity mode, though achieving unitary gates and extending control to multiple modes remains a challenge. In this work, we overcome this by introducing two sideband control strategies: (1) a shelving technique that prevents unwanted transitions by temporarily storing populations in sideband-transparent transmon states and (2) a method that exploits the dispersive shift to synchronize sideband transition rates across chosen photon-number pairs to implement transmon-cavity SWAP gates that are selective on photon number. We leverage these protocols to prepare Fock and binomial code states across any of ten modes of a multimode cavity with millisecond cavity coherence times. We demonstrate the encoding of a qubit from a transmon into arbitrary vacuum and Fock state superpositions, as well as entangled NOON states of cavity mode pairs— a scheme extendable to arbitrary multimode Fock encodings. Furthermore, we implement a new binomial encoding gate that converts arbitrary transmon superpositions into binomial code states in $\qty{4}{\micro\second}$ (less than $1/\chi$), achieving an average post-selected final state fidelity of $\qty{96.3}{\percent}$ across different fiducial input states.

Huang, Jordan [Rutgers U., Piscataway]↗
DOE OSTI2024

Deep quantum circuit simulations of low-energy nuclear states

Numerical simulation is an important method for verifying the quantum circuits used to simulate low-energy nuclear states. However, real-world applications of quantum computing for nuclear theory often generate deep quantum circuits that place demanding memory and processing requirements on conventional simulation methods. Here, we present advances in high-performance numerical simulations of deep quantum circuits to efficiently verify the accuracy of low-energy nuclear physics applications. Our approach employs novel methods for accelerating the numerical simulation including management of simulated mid-circuit measurements to verify projection based state preparation circuits. In this study, we test these methods across a variety of high-performance computing systems and our results show that circuits up to 21 qubits and more than 115,000,000 gates can be efficiently simulated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Adaptive variational ground state preparation for spin-1 models on qubit-based architectures

Here, we apply the adaptive variational quantum imaginary time evolution (AVQITE) method to prepare ground states of one-dimensional spin S = 1 models. We compare different spin-to-qubit encodings (standard binary, Gray, unary, and multiplet) with regard to the performance and quantum resource cost of the algorithm. Using state-vector simulations, we study two well-known spin-1 models: the Blume-Capel model of transverse-field Ising spins with single-ion anisotropy, and the XXZ model with single-ion anisotropy. We consider system sizes of up to 20 qubits, which corresponds to spin-1 chains up to length 10. We determine the dependence of the number of CNOT gates in the AVQITE state preparation circuit on the encoding, the initial state, and the choice of operator pool in the adaptive method. Independent of the choice of encoding, we find that the CNOT gate count scales cubically with the number of spins for the Blume-Capel model and quartically for the anisotropic XXZ model. However, the multiplet and Gray encodings present smaller prefactors in the scaling relations. These results provide useful insights for the implementation of AVQITE on quantum hardware.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Progress on 3D SRF-based architecture for quantum computing

Superconducting radio frequency (SRF) cavities are excellent choices for storing and manipulating quantum information as quantum d-level systems (qudits) due to their exceptionally long lifetimes and large accessible Hilbert spaces. A common strategy to manipulate the states is to use a nonlinear element like a transmon. We present preliminary experimental results obtained with cavity displacements and selective number dependent arbitrary phase gates for universal qudit control, and its application towards High-energy physics (HEP) simulations and beyond. We discuss the advantages and challenges associated with building a 3D SRF architecture while maintaining long cavity lifetimes in the presence of lossy components. We show how the system coherence properties can be preserved by carefully engineering to minimize the participation of the long coherence modes in different loss channels, while ensuring sufficient quantum controllability. We further discuss the path towards building multi-qudit systems.

Romanenko, Alexander↗
DOE OSTI2023

Andreev Reflection and Klein Tunneling in High-Temperature Superconductor-Graphene Junctions

Scattering processes in quantum materials emerge as resonances in electronic transport, including confined modes, Andreev states, and Yu-Shiba-Rusinov states. However, in most instances, these resonances are driven by a single scattering mechanism. Here, in this paper, we show the appearance of resonances due to the combination of two simultaneous scattering mechanisms, one from superconductivity and the other from graphene p-n junctions. These resonances stem from Andreev reflection and Klein tunneling that occur at two different interfaces of a hole-doped region of graphene formed at the boundary with superconducting graphene due to proximity effects from Bi 2 Sr 2 Ca 1 Cu 2 O 8+δ . The resonances persist with gating from p + -p and p-n configurations. The suppression of the oscillation amplitude above the bias energy which is comparable to the induced superconducting gap indicates the contribution from Andreev reflection. Our experimental measurements are supported by quantum transport calculations in such interfaces, leading to analogous resonances. Our results put forward a hybrid scattering mechanism in graphene–high-temperature superconductor heterojunctions of potential impact for graphene-based Josephson junctions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗