Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “optimal operation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Exploring the All-to-All Collective Optimization Space with ConnectX CORE-Direct

The all-to-all collective communication operation is used by many scientific applications, and is one of the most time consuming and challenging collective operation to optimize. The algorithms for all-to-all operations typically fall into two classes, logarithmic and linear scaling algorithms, with Bruck's algorithm, a logarithmic scaling algorithm, used in many small-data all-to-all implementations. The recent addition of InfiniBand CORE-Direct support for network management of collective communications offers new opportunities for optimizing all-to-all operation as well as supporting truly asynchronous implementations of these operations. This paper presents several new enhancements to the Bruck small-data algorithm that leverage CORE-Direct and other InfiniBand network capabilities to produce efficient implementations of this collective operation. These include RDMA, SR-RNR, and SR-RTR algorithms. In addition, nonblocking implementations of these collective operations are also presented. Benchmark results show that the RDMA algorithm, which uses CORE-Direct capabilities to offload collective communication management to the Host Channel Adapter (HCA), hardware gather support for sending non-continuous data, and low-latency RDMA semantics, performs the best. For a 64 processes and 128 byte-per-process all-to-all, the RDMA algorithm performs 27% better than Bruck's algorithm implementation in Open MPI and 136% better than the SR-RTR algorithm. In addition, the nonblocking versions of these algorithms have the same performance characteristics as the blocking algorithms. Finally, measurements of computation/communication overlap capacity show that all offloaded algorithms achieve about 98% overlap for large data all-to-all, whereas implementations using host-based progress achieve only about 9.5% overlap.

Venkata, Manjunath Gorentla↗

Optimizing stability, transport, and divertor operation through plasma shaping for steady-state scenario development in DIII-D

Recent studies on the DIII-D tokamak [ J. L. Luxon, Nucl. Fusion 42, 614 (2002) ] have elucidated key aspects of the dependence of stability, confinement, and density control on the plasma magnetic configuration, leading to the demonstration of nearly noninductive operation for >1 s with pressure 30% above the ideal no-wall stability limit. Achieving fully noninductive tokamak operation requires high pressure, good confinement, and density control through divertor pumping. Plasma geometry affects all of these. Ideal magnetohydrodynamics modeling of external kink stability suggests that it may be optimized by adjusting the shape parameter known as squareness ( ). Optimizing kink stability leads to an increase in the maximum stable pressure. Experiments confirm that stability varies strongly with , in agreement with the modeling. Optimization of kink stability via is concurrent with an increase in the H-mode edge pressure pedestal stability. Global energy confinement is optimized at the lowest tested, with increased pedestal pressure and lower core transport. Adjusting the magnetic divertor balance about a double-null configuration optimizes density control for improved noninductive auxiliary current drive. The best density control is obtained with a slight imbalance toward the divertor opposite the ion grad(B) drift direction, consistent with modeling of these effects. These optimizations have been combined to achieve noninductive current fractions near unity for over 1 s with normalized pressure of 3.5< N<3.9, bootstrap current fraction of >65%, and a normalized confinement factor of H98(y,2) 1.5.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Optimal Control for Battery Storage Using Nonlinear Models

Battery storage system (BSS) becomes increasingly popular for grid applications due to the advance in battery and power electronics technologies as well as the growing need of flexibility and reserve from power systems with rapidly developed renewable generation. Successful assessment and deployment of BSS requires optimizing its operation and therefore maximizing the potential benefits. Although there exist studies that develop optimal control for evaluation or operational scheduling of BSS, modeling of charging/discharging operation and the corresponding impacts on state-of-charge (SOC) is over simplified in these methods. This paper develops an optimal control for BSS evaluation and operational scheduling using a general nonlinear model that expresses the change of SOC as a function of charging/discharging power and SOC level. The proposed method is compared with a typical existing method through a real-world energy storage evaluation project to show the significance of the proposed method.

battery, energy storage system, dynamic programmin↗

Utilization of an Advanced Sensor network to determine fuel heating value and Real-Time net unit heat rate during transient operation

Coal-fired utility boilers are being increasingly used as variable electricity generation to resolve the imbalance in the energy market from the expansion of intermittent renewable energy. The frequent transient operation required to meet residual energy demand has created a challenge for coal-fired units to operate efficiently. This work utilizes an advanced sensor network (ASN) to calculate net unit heat rate (NUHR) of a coal-fired boiler in real time through combustion calculations and statistical correlations to provide the tools for optimizing dynamic operation. Real-time heating values that were necessary to determine fuel input energy to calculate accurate NUHR were found using both fundamental and data-driven methods. Real-time NUHR shows distinct shifts that reflect changes in process conditions that will improve the ability to optimize transient operation. Data-driven heating value correlations had 24% lower root mean square error (RMSE) than the fundamental combustion calculation approach when compared to daily retrospective proximate analysis. Furthermore, the data-driven method RMSE improved by 7% with the inclusion of ASN data. Future work is to validate by comparing unit performance with and without the inclusion of NUHR as a control parameter for the dynamic neural network.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Optimal recovery of linear operators in non-Euclidean metrics

The paper looks at problems concerning the recovery of operators from noisy information in non-Euclidean metrics. A number of general theorems are proved and applied to recovery problems for functions and their derivatives from the noisy Fourier transform. In some cases, a family of optimal methods is found, from which the methods requiring the least amount of original information are singled out. Bibliography: 25 titles.

97 MATHEMATICS AND COMPUTING↗

Studies and optimization of Pohang Light Source-II superconducting radio frequency system at stable top-up operation with beam current of 400 mA

After three years of upgrading work, the Pohang Light Source-II (PLS-II) is now successfully operating. The final quantitative goal of PLS-II is a top-up user-service operation with beam current of 400 mA to be completed by the end of 2014. During the beam store test up to 400 mA in the storage ring (SR), it was observed that the vacuum pressure around the radio frequency (RF) window of the superconducting cavity rapidly increases over the interlock level limiting the availability of the maximum beam current storing. Although available beam current is enhanced by setting a higher RF accelerating voltage, it is better to keep the RF accelerating voltage as low as possible in the long time top-up operation. We investigated the cause of the window vacuum pressure increment by studying the changes in the electric field distribution at the superconducting cavity and waveguide according to the beam current. In our simulation, an equivalent physical modeling was developed using a finite-difference time-domain code. The simulation revealed that the electric field amplitude at the RF window is exponentially increased as the beam current increases, thus this high electric field amplitude causes a RF breakdown at the RF window, which comes with the rapid increase of window vacuum pressure. The RF accelerating voltage of PLS-II RF system was set to 4.95 MV, which was estimated using the maximum available beam current that works as a function of RF voltage, and the top-up operation test with the beam current of 400 mA was successfully carried out.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Integrated operation scenarios: Chapter 6 of the special issue: on the path to tokamak burning plasma operation

Here we report the progress of the development and optimization of operational scenarios for ITER and beyond, focusing upon baseline, hybrid, and steady-state scenarios since 2007. This includes advancements made by the integrated operation scenarios (IOS) topical group of the international tokamak physical activity as well as contributions from the broader tokamak community. The key area of research involves developing IOSs that encompass tokamak physics, operation, and technology by utilizing integrated modeling and control strategies. This requires leveraging available actuators to simultaneously control plasma position and shape, MHD activities that could lead to disruptions, transport, plasma-wall interaction and power exhaust, fuel cycle, fusion burn, and tritium breeding. The control extends from the plasma initiation phase, through the current ramp-up, flattop, start and end of the fusion burn, and current ramp-down, to the plasma termination phase. A review of the currently developed scenarios and modeling is provided in terms of (i) optimizing plasma initiation in ITER, (ii) preparing for the low activation phase to fully commission all tokamak systems and establish and validate physics and scenario conditions in preparation for deuterim-tritium (DT) operation, (iii) developing and preparing baseline and hybrid scenarios to demonstrate the feasibility of achieving these regimes within device constraints, (iv) exploring steady-state scenarios to meet ITER’s steady-state goals, (v) evaluating and preparing actuators for ITER, (vi) developing integrated control solutions using shared actuators. The most notable achievements include; (i) the development of ITER demonstration discharges by matching various dimensionless parameters, (ii) the development of scenarios in an ITER-like tungsten environment and DT operation, and (iii) the development of scenarios in superconducting tokamaks, enabling long-pulse operations with similar coil constraints to ITER. Along with these significant achievements, outstanding issues and recommendations for further research and development are provided. Importantly, this study goes beyond simply updating the ITER Physics Basis; it carries profound implications for the broader field of burning plasma research, offering valuable insights and guidance for the next generation of fusion experiments and devices.

ITER↗

Optimizing the design and operation of water networks: Two decomposition approaches

We consider the design and operation of water networks simultaneously. Water network problems can be divided into two categories: the design problem and the operation problem. The design problem involves determining the appropriate pipe sizing and placements of pump stations, while the operation problem involves scheduling pump stations over multiple time periods to account for changes in supply and demand. Our focus is on networks that involve water co-produced with oil and gas. While solving the optimization formulation for such networks, we found that obtaining a primal (feasible) solution is more challenging than obtaining dual bounds using off-the-shelf mixed-integer nonlinear programming solvers. Therefore, we propose two methods to obtain good primal solutions. One method involves a decomposition framework that utilizes a convex reformulation, while the other is based on time decomposition. To test our proposed methods, we conduct computational experiments on a network derived from the PARETO case study.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Real Time Optimal Control of Supercapacitor Operation for Frequency Response

Supercapacitors are gaining wider applications in power systems due to fast dynamic response. Utilizing supercapacitors by means of power electronics interfaces for power compensation is a proven effective technique. For applications such as requency restoration if the cost of supercapacitors maintenance as well as the energy loss on the power electronics interfaces are addressed. It is infeasible to use traditional optimization control methods to mitigate the impacts of frequent cycling. This paper proposes a Front End Controller (FEC) using Generalized Predictive Control featuring real time receding optimization. The optimization constraints are based on cost and thermal management to enhance to the utilization efficiency of supercapacitors. A rigorous mathematical derivation is conducted and test results acquired from Digital Real Time Simulator are provided to demonstrate effectiveness.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Dynamic Modeling of a Kaplan Hydroturbine Using Optimal Parametric Tuning and Real Plant Operational Data

To address grid variability caused by renewable energy integration and to maintain grid reliability and resilience, hydropower must quickly adjust its power generation over short time periods. This changing energy generation landscape requires advance technology integration and adaptive parameter optimization for hydropower systems via digital twin effort. However, this is difficult owing to the lack of characterization and modeling for the nonlinear nature of hydroturbines. To solve this issue, this paper first formulates a six-coefficient Kaplan hydroturbine model and then proposes a parametric optimization tuning framework based on the Nelder–Mead algorithm for adaptive dynamic learning of the six-coefficients so as to build models that describe the turbine. To assess the performance of the proposed optimal parametric tuning technique, operational data from a real-world Kaplan hydroturbine unit are collected and used to model the relationship between the gate opening and the generated power production. The findings show that the proposed technique can effectively and adaptively learn the unknown dynamics of the Kaplan hydroturbine while optimally tune the unknown coefficients to match the generated power output from the real hydroturbine unit with an inaccuracy of less than 5%. The method can be used to provides optimal tuning of parameters critical for controller design, operational optimization and daily maintenance for hydroturbines in general.

13 HYDRO ENERGY↗

Important powertrain dynamics for developing models for control of connected and automated electrified vehicles

Connected and Automated Vehicles (CAV) technology presents significant opportunities for energy saving in the transportation sector. CAV technology forecasts vehicle and powertrain power needs under various terrain, ambient, and traffic conditions. Integration of the CAV technology in Hybrid Electric Vehicles (HEVs) provides the opportunity for optimal vehicle operation. Indeed, Hybrid Electric Vehicle powertrains present high degrees of flexibility and possibility for choosing optimum powertrain modes based on the predicted traction power needs. In modeling complex CAV powertrain dynamics, the modeler needs to consider short-time scale powertrain dynamics, such as engine transients, and hysteresis of mode-switching for a multi-mode HEV. Therefore, the powertrain dynamics essential for developing powertrain controllers for a class of connected HEVs is presented. To this end, control-oriented powertrain dynamic models for a test vehicle consisting of full electric, hybrid, and conventional engine operating modes are developed. The resulting powertrain model can forecast vehicle traction torque and energy consumption for the specified prediction horizon of the test vehicle. The model considers different operating modes and associated energy penalty terms for mode switching. Thus, the vehicle controller can determine the optimum powertrain mode, torque, and speed for forecasted vehicle operation via utilizing connectivity data. The powertrain model is validated against the experimental data and shows prediction error of less than 5% for predicting vehicle energy consumption. The model is used to create energy penalty maps that can be used for CAV control, for example fuel penalty map for engine torque changes (10–40 Nm) at each engine speed. The results of model-based optimization show optimum switching delays ranging from 0.4 to 1.4 s to avoid hysteresis in mode switching.

Engineering↗

Multi Infrastructure Control and Optimization Toolkit, Resilient Design Module (MICOT-RDT), version 2.X

MICOT is a tool for optimizing and controlling infrastructure systems. In includes modules for optimizing the operations of an infrastructure structure (for example optimal dispatch), designing infrastructure systems, restoring infrastructures systems, resiliency, preparing for natural disasters, interdicting networks, state estimation, sensor placement, and simulation of infrastructure systems. It implements algorithms developed at LANL that have been published in the academic community. This is a release of the of resilient design module of the MICOT.

Bent, Russell↗

An analysis of the accuracy of a parameter optimization

The numerical operations involved in a currently used optimization technique are discussed and analyzed with special attention to the numerical accuracy. Alternative methods for deriving linear system transfer functions, finding the relationships between the transfer function coefficients and the design parameters, and solving a matrix equation are presented for more accurate and cost effective solutions.

Baram, Y.↗

Operationally efficient propulsion system study (OEPSS) data book: Space Transfer Propulsion Operational Efficiency Study Task of OEPSS - Volume 6

This document is the final report for the Space Transfer Propulsion Operational Efficiency Study Task of the Operationally Efficient Propulsion System Study (OEPSS) conducted by the Rocketdyne Division of Rockwell International. This Study task studied, evaluated and identified design concepts and technologies which minimized launch and in-space operations and optimized in-space vehicle propulsion system operability.

Harmon, Timothy J.↗

Optimal Decision Making in High-Throughput Virtual Screening Pipelines

ABSTRACT Effective selection of the potential candidates that meet certain conditions in a tremendously large search space has been one of the major concerns in many real-world applications. In addition to the nearly infinitely large search space, rigorous evaluation of a sample based on the reliable experimental or computational platform is often prohibitively expensive, making the screening problem more challenging. In such a case, constructing a high-throughput screening (HTS) pipeline that pre-sifts the samples expected to be potential candidates through the efficient earlier stages, results in a significant amount of savings in resources. However, to the best of our knowledge, despite many successful applications, no one has studied optimal pipeline design or optimal pipeline operations. In this study, we propose two optimization frameworks, applying to most (if not all) screening campaigns involving experimental or/and computational evaluations, for optimally determining the screening thresholds of an HTS pipeline. We validate the proposed frameworks on both analytic and practical scenarios. In particular, we consider the optimal computational campaign for the long non-coding RNA (lncRNA) classification as a practical example. To accomplish this, we built the high-throughput virtual screening (HTVS) pipeline for classifying the lncRNA. The simulation results demonstrate that the proposed frameworks significantly reduce the effective selection cost per potential candidate and make the HTS pipelines less sensitive to their structural variations. In addition to the validation, we provide insights on constructing a better HTS pipeline based on the simulation results.

97 MATHEMATICS AND COMPUTING↗

Mission Design Strategies for Rendezvous and Servicing of Sun-Earth Libration Point Missions

With the launch of the James Webb Space Telescope (JWST) and future launches of the Roman Space Telescope (RST) and larger telescopes such as the proposed Habitable Worlds Observatory (HWO), the questions of where and how to rendezvous to enable servicing of these telescope missions arise. To aid in determining the allowable locations to rendezvous for servicing from a trajectory design approach, our previous research and analysis has shown feasible transfer trajectories between the Sun-Earth Libration L2 region (Quasi-Halo orbit) and the Earth Moon vicinity (Distant Retrograde Orbit (DRO), Quasi-Halo Orbit, Halo Orbit, and Near Rectilinear Halo Orbit (NRHO)), along with the related transfer constraints and the corresponding total fuel mass costs. We now focus on operational-like optimal scenarios for these transfers to complete a rendezvous to permit servicing at various Libration orbit locations. In this paper, we address how operational navigation and maneuver execution uncertainties impact the rendezvous timing and fuel mass (via ΔV). While optimization techniques are applied to ensure minimal ΔVs, we also analyze various transfer trajectory durations and rendezvous arrival geometries. The analysis presented includes dynamical system approaches and applies optimization through several tools including the Adaptive Trajectory Design (ATD) module as an initial guess, numerical computation using the General Mission Analysis Tool (GMAT) and Systems Tool Kit (STK) with higher fidelity perturbation modeling, and recently developed optimization tools that incorporate dynamical systems directly into the optimization process. Transfer trajectory options examined include a direct transfer from Earth versus departures from the previously examined Earth-Moon regime orbits, e.g. NRHOs and DROs. A return from Sun-Earth to lunar vicinity for a complete servicing after a rendezvous in Sun-Earth orbit is also considered. The resultant ΔV’s for each scenario is provided with discussions on various transfer trades, rendezvous considerations, and orbital limitations from the dynamical systems. A Poincare-like mapping of trajectory and rendezvous conditions categorize feasible and optimum transfer approaches, dependent on Sun-Earth orbit mission parameters. The focus of this research addresses questions for upcoming trades regarding servicing options for current and future Sun-Earth L1 and L2 missions. By doing a comprehensive analysis approach (dynamical systems + high fidelity optimization with true operational constraints), this paper will serve as a guide for mission architecture and operational trade considerations.

Maneuver Design↗

Nonconvex Robust Optimization for the Design and Operation of Advanced Energy Systems Using PyROS

This work discusses recent advances of the two-stage robust optimization (RO) solver PyROS and applications to advanced energy systems optimization. To demonstrate the computational performance and reliability of PyROS, a study on a monoethanolamine (MEA)-based CO2 absorption flowsheet is presented. (Near-)robust feasible designs for CO2 absorption flowsheet at high carbon capture are obtained with the PyROS solver. The results demonstrate that the PyROS solver, including recent extensions to multi-stage RO settings, provides a reliable avenue to optimize the design and operation of advanced energy systems subject to various sources of parametric uncertainty.

Sherman, Jason↗