SEARCH · Engineering Papers

Results for “numerical relativity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Uptake and elimination of 137Cs in aquatic biota inhabiting a contaminated effluent canal

Radiocesium (137Cs) is among the most prevalent and concerning radionuclide released from anthropogenic activities due to its relatively slow decay time and high bioavailability. Numerous studies have reported activity concentrations of 137Cs in exposed biota, but few have assessed detailed toxicokinetics. The objective of our study was to quantify and compare the uptake and elimination of 137Cs in aquatic taxa from multiple classes with different ecological roles inhabiting a canal contaminated from nuclear production activities on the Savannah River Site in South Carolina, USA. We tracked accumulation and elimination of 137Cs in four understudied aquatic species: one aquatic macrophyte [American white water lily (Nymphae odorata), two benthic associated omnivorous species (American bullfrog (Lithobates catesbeianus) and red swamp crayfish (Procambarus clarkii), and one pelagic carnivorous fish (Eastern mosquitofish (Gambusia holbrooki)]. We monitored accumulation of 137Cs from initial exposure until equilibrium for biota restricted within the canal and subsequently tracked elimination of 137Cs over time by moving organisms from the canal to a nearby reference pond. Results indicated bullfrog tadpoles reached 95 % equilibrium in approximately 9 days, the fastest among the species evaluated. After bullfrog tadpoles, the next fastest time to equilibrium was achieved by red swamp crayfish (51 days) followed by mosquitofish (86 days). At equilibrium, bullfrog tadpoles were found to have similar 137Cs activity concentrations to mosquitofish (3.16 and 3.57 Bq/g, respectively), and both were significantly higher than red swamp crayfish (1.77 Bq/g). For elimination, we found biological half-lives to range between 8 and 43 days with bullfrog tadpoles eliminating 137Cs the fastest followed by water lilies, mosquitofish, and red swamp crayfish. Overall, we found the uptake and elimination of 137Cs to vary widely among our studied species, but benthic organisms are not at an increased risk to accumulate 137Cs compared to organisms in less frequent contact with the sediment.

Benthic organism Bioaccumulation Bioindicator Elim↗

DOE OSTI2020

Real-time monitoring and prediction of water quality parameters and algae concentrations using microbial potentiometric sensor signals and machine learning tools

We report the overarching hypothesis of this study was that temporal microbial potentiometric sensor (MPS) signal patterns could be used to predict changes in commonly monitored water quality parameters by using artificial intelligence/machine learning tools. To test this hypothesis, the study first examines a proof of concept by correlating between MPS's signals and high algae concentrations in an algal cultivation pond. Then, the study expanded upon these findings and examined if multiple water quality parameters could be predicted in real surface waters, like irrigation canals. Signals generated between the MPS sensors and other water quality sensors maintained by an Arizona utility company, including algae and chlorophyll, were collected in real time at time intervals of 30 min over a period of 9 months. Data from the MPS system and data collected by the utility company were used to train the ML/AI algorithms and compare the predicted with actual water quality parameters and algae concentrations. Based on the composite signal obtained from the MPS, the ML/AI was used to predict the canal surface water's turbidity, conductivity, chlorophyll, and blue-green algae (BGA), dissolved oxygen (DO), and pH, and predicted values were compared to the measured values. Initial testing in the algal cultivation pond revealed a strong linear correlation (R 2 = 0.87) between mixed liquor suspended solids (MLSS) and the MPSs' composite signals. The Normalized Root Mean Square Error (NRMSE) between the predicted values and measured values were <6.5%, except for the DO, which was 10.45%. The results demonstrate the usefulness of MPSs to predict key surface water quality parameters through a single composite signal, when the ML/AI tools are used conjunctively to disaggregate these signal components. The maintenance-free MPS offers a novel and cost-effective approach to monitor numerous water quality parameters at once with relatively high accuracy.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Strong Coupling in All-Dielectric Intersubband Polaritonic Metasurfaces

Mie-resonant dielectric metasurfaces are excellent candidates for both fundamental studies related to light–matter interactions and for numerous applications ranging from holography to sensing to nonlinear optics. To date, however, most applications using Mie metasurfaces utilize only weak light-matter interaction. Furthermore, we go beyond the weak coupling regime and demonstrate for the first time strong polaritonic coupling between Mie photonic modes and intersubband (ISB) transitions in semiconductor heterostructures. Furthermore, along with demonstrating ISB polaritons with Rabi splitting as large as 10%, we also demonstrate the ability to tailor the strength of strong coupling by engineering either the semiconductor heterostructure or the photonic mode of the resonators. Unlike previous plasmonic-based works, our new all-dielectric metasurface approach to generate ISB polaritons is free from ohmic losses and has high optical damage thresholds, thereby making it ideal for creating novel and compact mid-infrared light sources based on nonlinear optics.

42 ENGINEERING↗

DOE OSTI2020

Effects of groundwater pumping on ground surface temperature: A regional modeling study in the North China Plain

Over-exploitation of groundwater (GW) in the North China Plain (NCP) since the 1960s has many environmental consequences. However, understanding of the dominant mechanisms remains limited, particularly at regional scale. In this study, the coupled ParFlow.CLM model representing subsurface and land-surface processes and their interactions was applied in the NCP at high spatio-temporal resolutions. The model was validated using the water and energy fluxes reported in previous studies and from the JRA-55 reanalysis. Numerical experiments were designed to examine the relative impacts of GW pumping and irrigation on the ground surface temperature (GST). Results show significant effects of GW pumping on GST in the NCP. Generally, the subsurface acts as a buffer to temporal variations in heat fluxes at the land-surface, but long-term pumping can gradually weaken this buffer, resulting in increases in the spatio-temporal variability of GST, as exemplified by hotter summers and colder winters. Considering that changes of water table depth (WTD) can significantly affect land surface heat fluxes when WTD ranges roughly between 0.01–10 m, the 0.5 m/year increase of WTD simulated by the model due to pumping can continue to increase the average WTD and hence, disturb GST, for about 20 years from the pre-pumping WTD in the NCP, before the WTD exceeds 10 m. The variations of GST are expected to be faster initially and gradually slow down due to the nonlinear behaviors of GST with WTD. The findings from this study in the NCP may also have implications for other regions with GW depletion.

Yang, Chen↗

DOE OSTI2020

PETSc Users Manual (Rev. 3.13)

This manual describes the use of PETSc for the numerical solution of partial differential equations and related problems on high-performance computers. The Portable, Extensible Toolkit for Scientific Computation (PETSc) is a suite of data structures and routines that provide the building blocks for the implementation of large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all message-passing communication. PETSc includes an expanding suite of parallel linear solvers, nonlinear solvers, and time integrators that may be used in application codes written in Fortran, C, C++, and Python. PETSc provides many of the mechanisms needed within parallel application codes, such as parallel matrix and vector assembly routines. The library is organized hierarchically, enabling users to employ the level of abstraction that is most appropriate for a particular problem. By using techniques of object-oriented programming, PETSc provides enormous flexibility for users. PETSc is a sophisticated set of software tools; as such, for some users it initially has a much steeper learning curve than a simple subroutine library. In particular, for individuals without some computer science background, experience programming in C, C++, python, or Fortran and experience using a debugger such as gdb or dbx, it may require a significant amount of time to take full advantage of the features that enable efficient software use. However, the power of the PETSc design and the algorithms it incorporates may make the efficient implementation of many application codes simpler than \rolling them" yourself.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2021

A computational study of turbulent separated flow over a wall-mounted cube at two different Reynolds numbers and incoming velocity profiles

Simulations of the canonical wall-mounted unit cube subjected to two distinct incident velocity profiles is performed at Reynolds numbers (Re) where the bulk flow characteristics are known to become relatively Re-insensitive using both direct numerical simulation (DNS) and wall-resolved large eddy simulation (WRLES). The aim of this work is to highlight the sensitivity of such bluff-body flows to mean shear and to provide a representative set of data for such flow scenarios where common turbulence modeling techniques often fail. Simple boundary conditions are selected to allow for easy comparisons for model development purposes and avoid confounding effects from freestream turbulence. In addition to mean velocity profiles, select turbulence statistics are presented in detail. We find that both mean velocity profiles and mean wake turbulence are Re-insensitive over the range examined here.

42 ENGINEERING↗

DOE OSTI2021

PETSc Users Manual (Revision 3.15)

This manual describes the use of the Portable, Extensible Toolkit for Scientific Computation (PETSc) for the numerical solution of partial differential equations and related problems on high-performance computers. PETSc is a suite of data structures and routines that provide the building blocks for the implementation of large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all distributed memory communication.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2022

PETSc/TAO Users Manual: Revision 3.18

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2022

Separation of CO 2 from Flue Gas and Potential for Geologic Sequestration

The objectives of this study were to review various methods reported in the literature for the separation and geologic sequestration of carbon dioxide and evaluate the potential of TVA fossil fuel-burning plant locations for onsite geologic sequestration of CO 2 from stack emissions. Several conventional and nonconventional technologies for the separation of CO 2 from flue gas, including absorption, adsorption, cryogenic distillation, membranes, hydrate formation and dissociation, and ammonia carbonation, have been reviewed in terms of separation mechanisms, flow diagrams, and costs. Most of the technologies that have been reviewed are still at the research and development stage. Critical information needed to assess and compare these technologies is still lacking. In addition, information on some of the technologies that have been tested at a pilot or industrial scale has not been fully disclosed in the open literature. Because of this lack of data, it is difficult to make a critical assessment of each of the separation technologies. Based on limited information, it was concluded that the most promising methods are membrane separation and the Mitsubishi process for chemical absorption. Both processes involve separating CO 2 at high temperature, minimizing the cost for cooling prior to separation. Physical and chemical geologic formations of CO 2 were also reviewed. It was concluded that due to the geologic time scale of CO 2 sequestration periods, relatively safe conditions, general proximity to CO 2 sources, and extensive knowledge of underground conditions, sequestration of CO 2 in underground aquifers and coal beds is a very promising method of mitigating greenhouse gas emissions. The cost is predicted to be relatively low and the suitable sites are numerous for this application, with many of these sites located close to the plants.

20 FOSSIL-FUELED POWER PLANTS↗

DOE OSTI2023

PETSc/TAO Users Manual (Rev. 3.19)

This manual describes the use of the Portable, Extensible Toolkit for Scientific Computation (PETSc) and the Toolkit for Advanced Optimization (TAO) for the numerical solution of partial differential equations and related problems on high-performance computers. PETSc/TAO is a suite of data structures and routines that provide the building blocks for the implementation of large-scale application codes on parallel (and serial) computers. PETSc uses the MPI standard for all distributed memory communication. PETSc/TAO includes a large suite of parallel linear solvers, nonlinear solvers, time integrators, and opti mization that may be used in application codes written in Fortran, C, C++, and Python (via petsc4py; see Getting Started). PETSc provides many of the mechanisms needed within parallel application codes, such as parallel matrix and vector assembly routines. The library is organized hierarchically, enabling users to employ the level of abstraction that is most appropriate for a particular problem. By using techniques of object-oriented programming, PETSc provides enormous flexibility for users. PETSc is a sophisticated set of software tools; as such, for some users it initially has a much steeper learning curve than packages such as MATLAB or a simple subroutine library. In particular, for individuals without some computer science background, experience programming in C, C++, python, or Fortran and experience using a debugger such as gdb or lldb, it may require a significant amount of time to take full advantage of the features that enable efficient software use. However, the power of the PETSc design and the algorithms it incorporates may make the efficient implementation of many application codes simpler than “rolling them” yourself. For many tasks a package such as MATLAB is often the best tool; PETSc is not intended for the classes of problems for which effective MATLAB code can be written. There are several packages, built on PETSc, that may satisfy your needs without requiring directly using PETSc. We recommend reviewing these packages functionality before starting to code directly with PETSc. PETSc can be used to provide a “MPI parallel linear solver” in an otherwise sequential, or OpenMP parallel code. This approach cannot provide extremely large improvements in the application time by utilizing large numbers of MPI processes but can still improve the performance. Certainly all parts of a previously sequential code need not be parallelized but the matrix generation portion must be parallelized to expect true scalability to large numbers of MPI processes. See PCMPI for details on how to utilize the PETSc MPI linear solver server. Since PETSc is under continued development, small changes in usage and calling sequences of routines will occur. PETSc has been supported for twenty-five years; see mailing list information on our website for information on contacting support.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2023

PETSc/TAO Users Manual (Rev. 3.20)

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1975

Optimum quantisers for a Gaussian input probability density and for the magnitude-error distortion measure

The parameters of non-uniform and uniform quantizers up to ten bits of quantization, optimum for a Gaussian input probability and for the magnitude-error distortion criterion are computed. Optimum quantizers must be understood as quantizers with minimum distortion. The numerical method used for the optimization converges relatively rapidly. The comparison between optimum non-uniform quantizers and optimum uniform quantizers is made.

Demaret, J. C.↗

NASA NTRS1979

Global magnetohydrodynamic simulation of the two-dimensional magnetosphere

The time-dependent magnetohydrodynamic interaction of the solar wind with a two-dimensional dipole magnetic field has been simulated using a novel Lagrangian particle type of MHD code that can treat local low density or vacuum regions without numerical instability. This enables one to simulate the time-dependent magnetic tail. When the solar wind field is southward, a magnetic field line topology consistent with Dungey's model emerges in steady state. The tail, however, is short, and the x-points are only slightly shifted from their vacuum locations, because of strong numerical resistivity. Different configurations resulting from different relative orientations of the solar wind magnetic field and dipole axis are also presented. While the magnetic field is relatively steady, the density and flow in the magnetosheath are turbulent, as are the bow shock and magnetopause; the Kelvin-Helmholtz instability may account for these phenomena. We also model a 'substorm' as the passage of a rotational discontinuity in the solar wind over the dipole. Both 90 and 180 deg shifts to a southward solar wind field cause a violent readjustment of the magnetic tail which eventually settles down to the Dungey configuration.

Leboeuf, J. N.↗

NASA NTRS1980

Viscous compressible flow about blunt bodies using a numerically generated orthogonal coordinate system

A numerical solution to the Navier-Stokes equations was obtained for blunt axisymmetric entry bodies of arbitrary shape in supersonic flow. These equations are solved on a finite difference mesh obtained from a simple numerical technique which generates orthogonal coordinates between arbitrary boundaries. The governing equations are solved in time dependent form using Stetter's improved stability three step predictor corrector method. For the present application, the metric coefficients were obtained numerically using fourth order accurate, finite difference relations and proved to be totally reliable for the highly stretched mesh used to resolve the thin viscous boundary layer. Solutions are obtained for a range of blunt body nose shapes including concavities.

Graves, R. A., Jr.↗

NASA NTRS1976

Spectroscopy of small cometary particles

Knowledge of chemical composition derived from the spectroscopy of small cometary meteoroids when they enter the Earth's atmosphere at high velocity and become visible as meteors is briefly summarized. For statistically reliable results it is necessary to have a large number of observations and this requires the photography of relatively faint meteors, which are considerably more numerous than the bright fireballs. The improvement in observational techniques and cameras has made it possible to extend the range of spectrographic data from cometary particles of mass between a kilogram and a gram down to those of only 0.01 or 0.001 grams in mass. The corresponding increase in the number-value of the statistics was from less than 100 data points to several 1000.

Millman, P. M.↗

NASA NTRS1981

Physics of auroral arc formation; Proceedings of the Chapman Conference on Formation of Auroral Arcs, Fairbanks, AK, July 21-25, 1980

The results of satellite, balloon-borne, and ground-based observations of auroral phenomena are discussed in terms of the morphology of auroral arcs and the behavior and characteristics of auroral electrons and ions. Further attention is given to auroral electric fields and field aligned currents, and to the development of models of auroral potential structures and energization of auroral particles. A simulation of space plasma phenomena is presented, along with numerical simulations of auroral potential structures and related phenomena, including the V-potential double layers and auroral arc deformations, and a simulation of auroral arcs. Plasma waves observed on auroral field lines and in laboratory conditions are reported, and theoretical studies of waves and turbulence in auroral plasmas are described.

Akasofu, S.-I.↗

NASA NTRS1982

Modulation of energetic particle fluxes by a mixed mode of transverse and compressional waves

Modulation characteristics of particle fluxes in the presence of a mixed mode of compressional and transverse magnetic waves at hydromagnetic frequencies are investigated through kinetic perturbation of the distribution function. The magnetospheric medium where the particles are modulated contains both the magnetic and pressure gradients. The modulation features are found to be strongly dependent on the energy and pitch angle of the particles. Drifting particles can resonate with waves whose phase velocities are close to their drift velocities. When this occurs, the modulation amplitudes become significantly large and large phase shifts will occur. It is pointed out that resonance is important for particles with mid pitch angles (40-70 deg). The phase shift between the particle modulations and the magnetic field oscillations are strongly controlled by the combined effects of transverse and compressional wave components and/or the occurrence of drift resonance. Numerical calculations are performed using the dispersion relation of drift mirror Alfven waves as an example of waves with both compressional and transverse components.

Lin, C. S.↗

NASA NTRS1984

Optimization of fringe-type laser anemometers for turbine engine component testing

The fringe type laser anemometer is analyzed using the Cramer-Rao bound for the variance of the estimate of the Doppler frequency as a figure of merit. Mie scattering theory is used to calculate the Doppler signal wherein both the amplitude and phase of the scattered light are taken into account. The noise from wall scatter is calculated using the wall bidirectional reflectivity and the irradiance of the incident beams. A procedure is described to determine the optimum aperture mask for the probe volume located a given distance from a wall. The expected performance of counter type processors is also discussed in relation to the Cramer-Rao bound. Numerical examples are presented for a coaxial backscatter anemometer.

Seasholtz, R. G.↗