Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multiple components”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Risk Importance Measures in the Designand Operation of Nuclear Power Plants

This monograph presents and discusses risk importance measures as quantified by the probabilistic risk assessment (PRA) models of nuclear power plants (NPPs) developed according to the current standards and practices. Usually, PRA tools calculate risk importance measures related to a single ?basic event? representing particular failure mode. This is, then, reflected in many current PRA applications. The monograph focuses on the concept of ?component-level? importance measures that take into account different failure modes of the component including common-cause failures (CCFs). In opening sections the roleof risk assessment in safety analysis of an NPP is introduced and discussion given of ?traditional?, mainly deterministic, design principles which have been established to assign a level of importance to a particular system, structure or component. This is followed by an overview of main risk importance measures for risk increase and risk decrease from current PRAs. Basic relations which exist among the measures are shown. Some of the current practical applications of risk importancemeasures from the field of NPP design, operation and regulation are discussed. The core of the monograph provides a discussion on theoreticalbackground and practical aspects of main risk importance measures at the level of ?component? as modeled in a PRA, starting from the simplest case, single basic event, and going toward more complexcases with multiple basic events and involvements in CCF groups. The intent is to express the component-level importance measures via theimportance measures and probabilities of the underlying single basic events, which are the inputs readily available from a PRA model andits results. Formulas are derived and discussed for some typical cases. The formulas and their results are demonstrated through some practicalexamples, done by means of a simplified PRA model developed in and run by RiskSpectrum? tool, which are presented in the appendices. The monograph concludes with discussion of limitations of the use of risk importance measures and a summary of component-level importance cases evaluated.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Human Readiness Levels in the Systems Engineering Process at Sandia National Laboratories

The Systems Analysis & Decision Support group (2150) at Sandia National Laboratories (SNL) led a study from 2015 to 2017 to investigate the utility of various options to achieve systematic and comprehensive incorporation of the human component of a system throughout the product lifecycle. Although technology readiness levels (TRL) are widely used in the systems engineering process to address technical maturity throughout design and development, a comparable technique to estimate the readiness of a technology for human operator use is lacking at SNL. The present study was designed to investigate the utility of a human readiness levels (HRL) scale to complement the TRL scale for the types of nuclear deterrence work conducted at SNL. The study team conducted 24 interviews with 26 individuals to (1) understand the extent to which current baseline design and development approaches at SNL incorporate the human dimension and (2) estimate the utility of various options to fully incorporate the human element in SNL work. Results confirmed that current processes do not manage the human component of a system systematically or comprehensively across programs. Although multiple options were seen to have some utility to address this shortcoming, an approach combining human readiness assessments within the existing TRL scale was perceived as relatively more useful for SNL. The study team created a proposed path forward to progress from the current ad hoc, reactive approach to a systematic, comprehensive, and rigorous approach characterized by full consideration of the human component of a system within and across programs and throughout the entire product lifecycle.

42 ENGINEERING↗

Characterizing Hazardous Gases from NMC811 Materials and Coin Cells with TGA and Tube-Furnace FTIR-MS Evolved-Gas-Analysis

Abuse testing is useful for informing the risks of different battery chemistries but has been limited to larger formats. This paper conducted thermal abuse tests at the smaller coin cell level to determine its relevance in specifying vent gas flammability and toxicity. A nitrogen purge carried the evolved gases into a parallel Fourier-transform infrared spectrometer (FTIR) and a mass spectrometer (MS) downstream of the tube furnace. The experimental system was validated by comparing evolved gas data for single components between the tube furnace system and a thermogravimetric analysis (TGA) instrument. Multiple samples were tested during validation, including CaCO3, electrolyte, delithiated NMC 811 cathode, and lithiated graphite anode. Temperature-resolved gas evolution of HF, CO2, CO, H2, and hydrocarbons from isolated components helped to characterize the emission sources. A previously unreported H2 generation mechanism was found. It was shown that the reduced NMC cathode acts as a catalyst to crack polypropylene-decomposed hydrocarbons into H2 at around 450 degrees C. It was also shown, while studying LiPF6 thermal decomposition, that using the tube furnace with a coin cell casing as the sample holder has some advantages for evolved-gas analysis of environmentally sensitive samples relative to testing in TGA instruments. After validation with single components, a fully charged NMC 811 coin cell was failed in the tube furnace. The measured evolved gases were found to be a combination of the species measured from the single component tests. H2 formation related to the reduced cathode was found to have greater abundance than H2 formed from the anode. Hydrogen fluoride emission factors and diethyl carbonate conversion emission factors assist in understanding the gaseous hazards for larger format cells.

25 ENERGY STORAGE↗

Assessment of Wind Turbine Component Loads Under Yaw-Offset Conditions

Renewed interest in yaw control for wind turbine and power plants for wake redirection and load mitigation demands a clear understanding of the effects of running with skewed inflow. In this paper, we investigate the physics of yawed operations, building up the complexity from a simplified analytical treatment to more complex aeroelastic simulations. Results in terms of damage equivalent loads (DELs) and extreme loads under operating, misaligned conditions are compared to data collected from an instrumented, utility-scale wind turbine. The analysis shows that multiple factors are responsible for the DELs of the various components, and that airfoil aerodynamics, elastic characteristics of the rotor, and turbulence intensities are the primary drivers. Both fatigue and extreme loads are observed to have relatively complex trends with yaw offsets, which can change depending on the wind-speed regime. As a result, good agreement is found between predicted and measured trends for both fatigue and ultimate loads.

17 WIND ENERGY↗

Assessment of wind turbine component loads under yaw-offset conditions

Abstract. Renewed interest in yaw control for wind turbine and power plants for wake redirection and load mitigation demands a clear understanding of the effects of running with skewed inflow. In this paper, we investigate the physics of yawed operations, building up the complexity from a simplified analytical treatment to more complex aeroelastic simulations. Results in terms of damage equivalent loads (DELs) and extreme loads under misaligned conditions of operation are compared to data collected from an instrumented, utility-scale wind turbine. The analysis shows that multiple factors are responsible for the DELs of the various components and that airfoil aerodynamics, elastic characteristics of the rotor, and turbulence intensities are the primary drivers. Both fatigue and extreme loads are observed to have relatively complex trends with yaw offsets, which can change depending on the wind-speed regime. Good agreement is found between predicted and measured trends for both fatigue and ultimate loads.

Damiani, Rick↗

Signatures of QCD conductivities in heavy-ion collisions

Dissipative processes are pivotal for understanding the hydrodynamic evolution of hot and dense quantum chromodynamics (QCD) matter created in relativistic nuclear collisions. The interplay of multiple conserved charges—net baryon, strangeness, and electric charge—is of particular interest. Here, we simulate the longitudinal hydrodynamic evolution with the three diffusion currents in a hydrodynamic model with a lattice-QCD-based equation of state, NEOS -4 D , and estimate rapidity distributions including diffusive corrections to the phase-space distribution in the presence of multiple charges, which ensure charge conservation at particlization. We determine the response of particle yields at midrapidity to changes in the diagonal and off-diagonal conductivities. Inversely, we find that most components of the conductivity matrix can be constrained experimentally using identified particle multiplicities at different collision energies.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

SU-E-J-47: Development of a High-Precision, Image-Guided Radiotherapy, Multi- Purpose Radiation Isocenter Quality-Assurance Calibration and Checking System

Purpose: To develop a system that can define the radiation isocenter and correlate this information with couch coordinates, laser alignment, optical distance indicator (ODI) settings, optical tracking system (OTS) calibrations, and mechanical isocenter walkout. Methods: Our team developed a multi-adapter, multi-purpose quality assurance (QA) and calibration device that uses an electronic portal imaging device (EPID) and in-house image-processing software to define the radiation isocenter, thereby allowing linear accelerator (Linac) components to be verified and calibrated. Motivated by the concept that each Linac component related to patient setup for image-guided radiotherapy based on cone-beam CT should be calibrated with respect to the radiation isocenter, we designed multiple concentric adapters of various materials and shapes to meet the needs of MV and KV radiation isocenter definition, laser alignment, and OTS calibration. The phantom's ability to accurately define the radiation isocenter was validated on 4 Elekta Linacs using a commercial ball bearing (BB) phantom as a reference. Radiation isocenter walkout and the accuracy of couch coordinates, ODI, and OTS were then quantified with the device. Results: The device was able to define the radiation isocenter within 0.3 mm. Radiation isocenter walkout was within ±1 mm at 4 cardinal angles. By switching adapters, we identified that the accuracy of the couch position digital readout, ODI, OTS, and mechanical isocenter walkout was within sub-mm. Conclusion: This multi-adapter, multi-purpose isocenter phantom can be used to accurately define the radiation isocenter and represents a potential paradigm shift in Linac QA. Moreover, multiple concentric adapters allowed for sub-mm accuracy for the other relevant components. This intuitive and user-friendly design is currently patent pending.

07 ISOTOPE AND RADIATION SOURCES↗

GRAVITY Spectro-interferometric Study of the Massive Multiple Stellar System HD 93206 A

Characterization of the dynamics of massive star systems and the astrophysical properties of the interacting components are a prerequisite for understanding their formation and evolution. Optical interferometry at milliarcsecond resolution is a key observing technique for resolving high-mass multiple compact systems. Here, we report on Very Large Telescope Interferometer/GRAVITY, Magellan/Folded-port InfraRed Echellette, and MPG2.2 m/FEROS observations of the late-O/early-B type system HD 93206 A, which is a member of the massive cluster Collinder 228 in the Carina nebula complex. With a total mass of about 90 M{sub ⊙}, it is one of the most compact massive quadruple systems known. In addition to measuring the separation and position angle of the outer binary Aa–Ac, we observe Brγ and He i variability in phase with the orbital motion of the two inner binaries. From the differential phase (Δ{sub ϕ}) analysis, we conclude that the Brγ emission arises from the interaction regions within the components of the individual binaries, which is consistent with previous models for the X-ray emission of the system based on wind–wind interaction. With an average 3σ deviation of Δ{sub ϕ}∼15{sup ∘}, we establish an upper limit of p ∼ 0.157 mas (0.35 au) for the size of the Brγ line-emitting region. Future interferometric observations with GRAVITY using the 8 m Unit Telescopes will allow us to constrain the line-emitting regions down to angular sizes of 20 μas (0.05 au at the distance of the Carina nebula).

79 ASTRONOMY AND ASTROPHYSICS↗

NRAP-Open-IAM: Open Wellbore Component (V.2.0)

The Open Wellbore component of NRAP-Open-IAM is applicable to the calculation of Area of Review at a carbon storage site and fast estimation of dense gas dispersion from multiple continuous CO 2 surface leakage sources for risk assessment. The Open Wellbore Component of NRAP-Open-IAM is a lookup table model based on the drift-flux approach. The National Research Assessment Partnership’s second-generation integrated assessment model, NRAP-Open-IAM, is open-source software written in Python for use in performance and quantitative risk assessment of geologic carbon storage (GCS) systems. The look-up table for open well leakage is an updated version the previous model which provides finer resolution of reservoir depth and more accurate fluid properties than the previous open well look-up table, especially in calculating the gas (CO 2 -rich) phase properties. The component model input parameters include the reservoir transmissivity, aquifer transmissivity, brine salinity, well radius, and well top and bottom depths. The reservoir transmissivity and brine salinity were set to values consistent with the reservoir component, and the well top and bottom depths varied with location. The possible outputs from the Open Wellbore component are leakage rates of CO 2 and brine to either an aquifer or atmosphere, depending on the depth of the well top. Several python test scripts are presented that demonstrate that the Open Wellbore component works correctly. Use of the open wellbore model in NRAP-Open-IAM may result in a large CO 2 leakage rates, comparable to the leakage rates of CO 2 blow out.

54 ENVIRONMENTAL SCIENCES↗

How to calculate the rate constants for nonradiative transitions between the M S components of spin multiplets?

Predicting the rates of spin-dependent processes characterized by nonradiative transitions between electronic states with different spin multiplicities is important for understanding the mechanisms of many photochemical and catalytic reactions. To calculate these rates, it is necessary to define the spin state representation and the couplings between these states that drives the interstate transitions. In this work, we describe three different approaches to calculating the spin-orbit coupling (SOC), transition probabilities, and rate constants between the MS components of the electronic states with different spin multiplicities. We implemented these approaches in our nonadiabatic statistical theory (NAST) software package, which predicts the transition probabilities and rate constants of spin-dependent processes using information obtained from electronic structure calculations. Here, we discuss the advantage and drawbacks of each approach and, as an example, calculate the rate constants for transitions between the spin states in the active site model of the protein rubredoxin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonlinear Matrix Approximation with Radial Basis Function Components

We introduce and investigate matrix approximation by decomposition into a sum of radial basis function (RBF) components. An RBF component is a generalization of the outer product between a pair of vectors, where an RBF function replaces the scalar multiplication between individual vector elements. Even though the RBF functions are positive definite, the summation across components is not restricted to convex combinations and allows us to compute the decomposition for any real matrix that is not necessarily symmetric or positive definite. We formulate the problem of seeking such a decomposition as an optimization problem with a nonlinear and non-convex loss function. Several modern versions of the gradient descent method, including their scalable stochastic counterparts, are used to solve this problem. We provide extensive empirical evidence of the effectiveness of the RBF decomposition and that of the gradient-based fitting algorithm. While being conceptually motivated by singular value decomposition (SVD), our proposed nonlinear counterpart outperforms SVD by drastically reducing the memory required to approximate a data matrix with the same L2 error for a wide range of matrix types. For example, it leads to 2 to 6 times memory save for Gaussian noise, graph adjacency matrices, and kernel matrices. Moreover, this proximity-based decomposition can offer additional interpretability in applications that involve, e.g., capturing the inner low-dimensional structure of the data, retaining graph connectivity structure, and preserving the acutance of images.

Rebrova, Elizaveta↗

MID-J CO EMISSION FROM NGC 891: MICROTURBULENT MOLECULAR SHOCKS IN NORMAL STAR-FORMING GALAXIES

We have detected the CO(6-5), CO(7-6), and [C I] 370 {mu}m lines from the nuclear region of NGC 891 with our submillimeter grating spectrometer ZEUS on the Caltech Submillimeter Observatory. These lines provide constraints on photodissociation region (PDR) and shock models that have been invoked to explain the H{sub 2} S(0), S(1), and S(2) lines observed with Spitzer. We analyze our data together with the H{sub 2} lines, CO(3-2), and infrared continuum from the literature using a combined PDR/shock model. We find that the mid-J CO originates almost entirely from shock-excited warm molecular gas; contributions from PDRs are negligible. Also, almost all of the H{sub 2} S(2) line and half of the S(1) line are predicted to emerge from shocks. Shocks with a pre-shock density of 2 Multiplication-Sign 10{sup 4} cm{sup -3} and velocities of 10 km s{sup -1} and 20 km s{sup -1} for C-shocks and J-shocks, respectively, provide the best fit. In contrast, the [C I] line emission arises exclusively from the PDR component, which is best parameterized by a density of 3.2 Multiplication-Sign 10{sup 3} cm{sup -3} and a far-ultraviolet field of G{sub o} = 100 for both PDR/shock-type combinations. Our mid-J CO observations show that turbulence is a very important heating source in molecular clouds, even in normal quiescent galaxies. The most likely energy sources for the shocks are supernovae or outflows from young stellar objects. The energetics of these shock sources favor C-shock excitation of the lines.

79 ASTRONOMY AND ASTROPHYSICS↗

Integration of Reliability with Mechanistic Thermalhydraulics: Report on Approach and Test Problem Results

The Risk-Informed Safety Margin Characterization (RISMC) pathway of the Light Water Reactor Sustainability Program is developing simulation-based methods and tools for analyzing safety margin from a modern perspective. There are multiple definitions of "margin." One class of definitions defines margin in terms of the distance between a point estimate of a given performance parameter (such as peak clad temperature), and a point-value acceptance criterion defined for that parameter (such as 2200° F). The present perspective on margin is that it relates to the probability of failure, and not just the distance between a nominal operating point and a criterion. In this work, margin is characterized through a probabilistic analysis of the "loads" imposed on systems, structures, and components, and their "capacity" to resist those loads without failing. Given the probabilistic load and capacity spectra, one can assess the probability that load exceeds capacity, leading to component failure. Within the project, we refer to a plot of these probabilistic spectra as "the logo." Refer to Figure 1 for a notional illustration. The implications of referring to "the logo" are (1) RISMC is focused on being able to analyze loads and spectra probabilistically, and (2) calling it "the logo" tacitly acknowledges that it is a highly simplified picture: meaningful analysis of a given component failure mode may require development of probabilistic spectra for multiple physical parameters, and in many practical cases, "load" and "capacity" will not vary independently.

99 GENERAL AND MISCELLANEOUS↗

AXR1-ECR1 and AXL1-ECR1 heterodimeric RUB-activating enzymes diverge in function in Arabidopsis thaliana

Related to UBIQUITIN (RUB) modification of CULLIN (CUL) subunits of the CUL-RING ubiquitin E3 ligase (CRL) superfamily regulates CRL ubiquitylation activity. RUB modification requires E1 and E2 enzymes that are analogous to, but distinct from, those activities required for UBIQUITIN (UBQ) attachment. Gene duplications are widespread in angiosperms, and in line with this observation, components of the RUB conjugation pathway are found in multiples in Arabidopsis. To further examine the extent of redundancy within the RUB pathway, we undertook biochemical and genetic characterizations of one such duplication event- the duplication of the genes encoding a subunit of the RUB E1 into AUXIN RESISTANT1 (AXR1) and AXR1- LIKE1 (AXL1). In vitro, the two proteins have similar abilities to function with E1 C-TERMINAL-RELATED1 (ECR1) in catalyzing RUB1 activation and RUB1-ECR1 thioester formation. Using mass spectrometry, endogenous AXR1 and AXL1 proteins were found in complex with 3HARUB1, suggesting that AXR1 and AXL1 exist in parallel RUB E1 complexes in Arabidopsis. In contrast, AXR1 and AXL1 differ in ability to correct phenotypic defects in axr1- 30, a severe loss-of-function AXR1 mutant, when the respective coding sequences are expressed from the same promoter, suggesting differential in vivo functions. These results suggest that while both proteins function in the RUB pathway and are biochemically similar in RUB-ECR1 thioester formation, they are not functionally equivalent.

59 BASIC BIOLOGICAL SCIENCES↗

Primary Processing Parameters, Porosity Production, and Fatigue Prediction for Additively Manufactured Alloy 718

Powder bed fusion processes commonly introduce voids and defects into components. It has been shown that many of these features and their size and shape characteristics are controllable through process parameter manipulation, but this process is typically time-consuming and expensive. In spite of this, an experiment was developed to explore a wide region of laser powder bed fusion process space, and several void measurements were obtained to characterize component density percentage, pore size, and pore shape. Then, multiple models commonly used in the literature to predict porosity were examined and compared with the experimental data. Using the developed porosity model, a fatigue life prediction framework was adapted, and the predictions were compared to the previously published experimental data. Results of this investigation reveal the strengths and weaknesses of multiple literature models in predicting porosity, and they depict how porosity and resulting fatigue lives vary across process space.

36 MATERIALS SCIENCE↗

Exploring the electronic structure and optical properties of the quaternary selenide compound, Ba{sub 4}Ga{sub 4}SnSe{sub 12}: For photovoltaic applications

Due to huge demand on discovering new materials for energy, we used first-principle calculations to explore the electronic structure and optical properties of a recent quaternary selenide, namely Ba{sub 4}Ga{sub 4}SnSe{sub 12}. The electronic structure and the optical properties of Ba{sub 4}Ga{sub 4}SnSe{sub 12} were calculated through a reliable approach of Engle Vosko-GGA (EV-GGA). We found that Ba{sub 4}Ga{sub 4}SnSe{sub 12} has a direct band gap of 2.14 eV positioned at Γ. Acquiring the fundamental characteristics of Ba{sub 4}Ga{sub 4}SnSe{sub 12,} we studied the linear optical properties like dielectric function in the energy range of 0–14 eV. From the dielectric function we noticed a weak directional anisotropy for the two components. The absorption spectrum indicates the possibility of greater multiple direct and indirect inter-band transitions in the visible regions and shows similar behavior with experimental spectrum. Ba{sub 4}Ga{sub 4}SnSe{sub 12} can be used as shielding material from UV radiations. Present study predicts that the Ba{sub 4}Ga{sub 4}SnSe{sub 12} is promising for photovoltaic applications due to their high absorption of solar radiations and photoconductivity in the visible range. - Graphical abstract: Interesting quaternary selenide compound, Ba{sub 4}Ga{sub 4}SnSe{sub 12}, for photovoltaic applications. - Highlights: • Ba{sub 4}Ga{sub 4}SnSe{sub 12} is a quaternary selenide designed for PV and thermoelectric. • Ba{sub 4}Ga{sub 4}SnSe{sub 12} has a direct band gap of 2.14 eV. • Ba{sub 4}Ga{sub 4}SnSe{sub 12,} has a maximum reflectivity in the visible and UV regions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energy dependence of prompt fissions neutron multiplicity in the 239 Pu(n, ƒ) reaction

Accurate multiplicities of prompt fission neutrons emitted in neutron-induced fission on a large energy range are essential for fundamental and applied nuclear physics. Measuring them to high precision for radioactive fissioning nuclides remains, however, an experimental challenge. In this work, the average prompt-neutron multiplicity emitted in the 239 Pu(n, ƒ) reaction was extracted as a function of the incident-neutron energy, over the range 1-700 MeV, with a novel technique, which allowed to minimize and correct for the main sources of bias and thus achieve unprecedented precision. At low energies, our data validate for the first time the ENDF/B-VIII.0 nuclear data evaluation with an independent measurement and reduce the evaluated uncertainty by up to 60%. This work opens up the possibility of precisely measuring prompt fission neutron multiplicities on highly radioactive nuclei relevant for an essential component of energy production world-wide.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Challenging endeavor to integrate gallium and carbon via direct bonding to evolve GaN on diamond architecture

Here this paper depicts efforts for fabricating GaN on diamond microstructure through direct bonding between Ga and C, while excluding the use of adhesive interlayer during spark plasma sintering (SPS) process. The resulting GaN on diamond architecture is seemingly successful, as suggested by macroscopic morphological observations. The microscopic inspection using high-resolution transmission electron microscopy (HRTEM), however, shows a unique, off-the-chart interlayer configuration, wherein the components are migrated, etched, or fused to tentatively form multiple crystal phases. These phases can be constructed based on their utmost stabilities among all possible phases thermodynamically driven under or near the SPS conditions.

36 MATERIALS SCIENCE↗