Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “model comparison.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

The Origin of the Doppler Flip in HD 100546: A Large-scale Spiral Arm Generated by an Inner Binary Companion

Companions at subarcsecond separation from young stars are difficult to image. However, their presence can be inferred from the perturbations they create in the dust and gas of protoplanetary disks. Here we present a new interpretation of SPHERE polarized observations that reveal the previously detected inner spiral in the disk of HD 100546. The spiral coincides with a newly detected 12 CO inner spiral and the previously reported CO emission Doppler flip, which has been interpreted as the signature of an embedded protoplanet. Comparisons with hydrodynamical models indicate that this Doppler flip is instead the kinematic counterpart of the spiral, which is likely generated by an inner companion inside the disk cavity.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

The shared socio-economic pathway (SSP) greenhouse gas concentrations and their extensions to 2500

Anthropogenic increases in atmospheric greenhouse gas concentrations are the main driver of current and future climate change. The integrated assessment community has quantified anthropogenic emissions for the shared socio-economic pathway (SSP) scenarios, each of which represents a different future socio-economic projection and political environment. Here, we provide the greenhouse gas concentrations for these SSP scenarios using the reduced-complexity climate–carbon-cycle model MAGICC7.0. We extend historical, observationally based concentration data with SSP concentration projections from 2015 to 2500 for 43 greenhouse gases with monthly and latitudinal resolution. CO 2 concentrations by 2100 range from 393 to 1135 ppm for the lowest (SSP1-1.9) and highest (SSP5-8.5) emission scenarios, respectively. We also provide the concentration extensions beyond 2100 based on assumptions regarding the trajectories of fossil fuels and land use change emissions, net negative emissions, and the fraction of non-CO 2 emissions. By 2150, CO 2 concentrations in the lowest emission scenario are approximately 350 ppm and approximately plateau at that level until 2500, whereas the highest fossil-fuel-driven scenario projects CO 2 concentrations of 1737 ppm and reaches concentrations beyond 2000 ppm by 2250. We estimate that the share of CO 2 in the total radiative forcing contribution of all considered 43 long-lived greenhouse gases increases from 66% for the present day to roughly 68% to 85% by the time of maximum forcing in the 21st century. For this estimation, we updated simple radiative forcing parameterizations that reflect the Oslo Line-By-Line model results. In comparison to the representative concentration pathways (RCPs), the five main SSPs (SSP1-1.9, SSP1-2.6, SSP2-4.5, SSP3-7.0, and SSP5-8.5) are more evenly spaced and extend to lower 2100 radiative forcing and temperatures. Performing two pairs of six-member historical ensembles with CESM1.2.2, we estimate the effect on surface air temperatures of applying latitudinally and seasonally resolved GHG concentrations. We find that the ensemble differences in the March–April–May (MAM) season provide a regional warming in higher northern latitudes of up to 0.4 K over the historical period, latitudinally averaged of about 0.1 K, which we estimate to be comparable to the upper bound (~5 % level) of natural variability. In comparison to the comparatively straight line of the last 2000 years, the greenhouse gas concentrations since the onset of the industrial period and this studies' projections over the next 100 to 500 years unequivocally depict a “hockey-stick” upwards shape. The SSP concentration time series derived in this study provide a harmonized set of input assumptions for long-term climate science analysis; they also provide an indication of the wide set of futures that societal developments and policy implementations can lead to – ranging from multiple degrees of future warming on the one side to approximately 1.5°C warming on the other.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Studying Performance Portability of LAMMPS across Diverse GPU-based Platforms

The molecular dynamics simulation software, LAMMPS, utilizes the Kokkos acceleration library to port computation to a diverse set of architectures including those based on GPU accelerators. In addition to Kokkos, LAMMPS contains a vast code base that leverages the CUDA application programming interface using library functions such as cuFFT, CUDA’s fast-fourier transform (FFT) library, and, more recently, also support for AMD’s Heterogeneous Interface for Portability (HIP) that is rapidly growing. While preparing LAMMPS tests for the AMD GPU-based test system precursors to Frontier, we investigated several strategies for accelerating LAMMPS on AMD GPUs, using the AMD Instinct MI100 and MI250X. In this work, we integrated the HIP FFT library, hipFFT, into the particle-particle particle-mesh (PPPM) long-range solver, which allowed the porting of PPPM calculations to the GPUs. Kokkos behavior on the MI100 and MI250X was also investigated through the package kokkos command of LAMMPS, targeting com- munication, memory usage, and particle grid decomposition. The Tersoff, Reax, Lennard-Jones (LJ), EAM, Granular, and PPPM potentials were investigated in this effort, and results from these experiments are provided. The selected potentials were run on Spock (AMD Instinct MI100), Crusher (AMD Instinct MI250X), AFW HPC11 (NVIDIA A100) and Summit (NVIDIA V100), for comparison. Operational roofline models were constructed and analyzed for the Tersoff, Reax, and Lennard-Jones potentials on Crusher and Summit.

Hagerty, Nick↗
DOE OSTI2023

Bison Verification and Validation Activities for TRISO

Numerical modeling and simulation (M&S) tools play a key role in the research, development, and overall safety assessments of next-generation nuclear energy systems. One such tool, Bison, is a nuclear fuel performance code that is applicable to many fuel forms (e.g., light-water reactor fuel, oxide and metallic fuel for fast reactors, tri-structural isotropic (TRISO) fuel, and plate fuel), and it uses the finite element method to model the thermo- mechanical response of nuclear fuels. One fuel form widely utilized in Generation-IV high-temperature gas-cooled and fluoride- salt-cooled nuclear reactor concepts is TRISO fuel. Recently, Bison’s capabilities were significantly expanded to enable it to model the performance of TRISO particles and compacts. It is important that Bison’s computational results be reliable and predictive, since this code is used to inform high-consequence decisions. The various processes developed to address this issue generally entail two fundamental steps: verification and validation (V&V). Verification ensures that the code functions correctly and is reliable. Code/solution verification, code benchmark, and software quality assurance exercises are examples of verification activities. On the other hand, validation is the process of assessing a code’s capability to accurately model physical problems. Comparisons between code results and experiments quantify the validation level. Application of V&V procedures is crucial to the development of computational tools that are free of coding mistakes and can accurately represent reality. The current study presents an overview of Bison V&V activities relevant to the TRISO fuel concept, which include code/solution verification exercises, CRP-6 Benchmark—a Coordinated Research Program through the International Atomic Energy Agency (IAEA)—exercises, and validation exercises with the Advanced Gas Reactor (AGR)- 1/2/3/4 experiment series.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Measurement of Nuclear Dependence in Inclusive Antineutrino Scattering

One of the fundamental questions in physics is the matter-antimatter asymmetry of the Universe, explored through charge-parity violation searches in neutrino oscillation experiments. Next-generation oscillation experiments like DUNE need to constrain the systematic uncertainties arising from our understanding of (anti)neutrino-nucleus scattering to within a few percent to achieve their physics goals. MINERvA, a dedicated (anti)neutrino-nucleus scattering experiment, plays a crucial role in constraining these uncertainties. This thesis presents MINERvA's first high-statistics direct measurement of nuclear dependence in charged-current inclusive antineutrino scattering on carbon, hydrocarbon, iron, and lead as a function of antimuon transverse momentum, $p_{\text{T}}$, and Bjorken~$x$. The analysis utilises interactions with a mean antineutrino energy of approximately~6~GeV, with reconstructed antimuons having a scattering angle of less than 17$^\circ$ relative to the antin eutrino beam and an antimuon energy of 2--20 GeV. The measured per-nucleon differential cross-sections are reported with a precision of 7--9\%, while the cross-section ratios of carbon, iron, and lead to hydrocarbon have uncertainties of 5\% or less. The cross-sections for iron and lead indicate strong suppression at low $p_{\text{T}}$ and Bjorken~$x$, and an enhancement at high $p_{\text{T}}$. These effects are observed to be more pronounced with the increasing size of the target nucleus and are not reproduced by the underlying simulation prediction. Comparisons to alternative models used in current (anti)neutrino interaction generators show some improvements in modelling over the base prediction model, yet they are still unable to fully reproduce the observed nuclear dependence in this analysis. Importantly, the analysis provides a direct test of nuclear effects in inclusive antineutrino scattering, with major contributions from resonant pion production, deep inelastic scattering, and the transition region between these channels, which will be significant in DUNE. This measurement also represents one of the largest antineutrino datasets in this energy regime analysed to date.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Measurement of the Triple-Differential Cross Section of Muon Neutrino Charged Current Interactions with Low Hadronic Activity in the NO$\nu$A Near Detector

This dissertation describes the analysis and measurement of the triple-differential cross-section of the $\nu_\mu CC$ interaction with Low Hadronic Activity (maximum kinetic energy of 250 MeV for protons and 175 MeV for pions) in the NOvA Near Detector. This cross-section is reported in bins of Muon Kinematics and available hadronic energy. The data corresponds to an accumulated $14.2\times10^{20}$ protons-on-target (POT) in the neutrino mode of the NuMI beam, with a narrow band of neutrino energies peaked at 1.8 GeV. The analysis provides a sample of neutrino–nucleus interactions with an enhanced fraction of quasi-elastic (QE) and two-particle-two-hole (2p2h) interactions and a suppression of resonant pion production (RES) and deep inelastic scattering (DIS) interactions. This enhancement of QE and 2p2h allows for quantitative comparisons with various models of these processes. We find strong disagreement between data and theory-based models in the forward muon direction, especially for the 0.2-0.4 GeV available hadronic energy region.

Lesmeister, James Ryan [Houston U.]↗
DOE OSTI2025

Fission Product Quantification and Burnup Analysis via Gamma Spectrometry of the AGR-5/6/7 TRISO Fuel Experiment

Five capsules containing varying configurations of TRISO fuel compacts were irradiated in the most recent Advanced Gas Reactor (AGR) TRISO test campaign, AGR-5/6/7. As part of the post-irradiation examination (PIE) of this work all the fuel compacts and capsule graphite holders were measured with the Precision Gamma Scanner (PGS) to determine isotopic activities and locations using gamma spectrometry. Measuring the compacts allowed for the comparison of physics model depletion calculations with the measured compact activity to validate models. These measurements also are used to find compacts of interest with low fission product retention that may be tested in subsequent PIE. Measurements of the holders can confirm fission product distribution and migration. Of the isotopes measured, Cs-137 and Cs-134 were used to estimate location of failed particles as well as determine a measured burnup estimation. Results from Capsule 1 compacts and the holder indicate many fuel particle failures occurred. There are high amounts of cesium in the holder near Stack 9 of Capsule 1 that corresponds to low fractions?measured-to-calculated (M/C) ratio?of cesium remaining in those compacts. All other capsules had cesium retention ratios near 1. The isotope 110mAg had less consistent results. Capsule 2 compacts exhibited a M/C of 0.20, much lower than anticipated for the temperatures these compacts underwent. Capsule 3 experienced much higher temperatures, >1300C and had an average M/C of 0.75. These are the opposite results than what was predicted by past AGR experiments for the relationship between temperature and isotope retention. Capsule 4 and 5 showed good fission product retention and agreement with the physics model predictions. The burnup results from the PGS measurements showed strong agreement between the physics models and the measured values. Using a ratio of Cs-134/Cs-137 to calculate the burnup match closely with the physics models. Additionally, the Cs-137 burnup results were less accurate but extremely close to the model results.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

“Understanding Robustness Lottery”: A Geometric Visual Comparative Analysis of Neural Network Pruning Approaches

Deep learning approaches have provided state-of-the-art performance in many applications by relying on large and overparameterized neural networks. However, such networks are very brittle and are difficult to deploy on resource-limited platforms. Model pruning, i.e., reducing the size of the network, is a widely adopted strategy that can lead to a more robust and compact model. Many heuristics exist for model pruning, but our understanding of the pruning process remains limited due to the black-box nature of a neural network model. Empirical studies show that some heuristics improve performance whereas others can make models more brittle. Here, this work aims to shed light on how different pruning methods alter the network’s internal feature representation and the corresponding impact on model performance. To facilitate a comprehensive comparison and characterization of the high-dimensional model feature space, we introduce a visual geometric analysis of feature representations. We evaluated a set of critical geometric concepts decomposed from the commonly adopted classification loss and used them to design a visualization system to compare and highlight the impact of pruning on model performance and feature representation. The proposed tool provides an environment for an in-depth comparison of pruning methods and a comprehensive understanding of how the model responds to common data corruption. By leveraging the proposed visualization, machine learning researchers can reveal the similarities between pruning methods and redundancy in robustness evaluation benchmarks, obtain geometric insights about the differences between pruned models that achieve superior robustness performance, and identify samples that are robust or fragile to model pruning and common data corruption.

Li, Zhimin [Univ. of Utah, Salt Lake City, UT (Uni↗
DOE OSTI2021

Agreement of Analytical and Simulation-Based Estimates of the Required Land Depth in Climate Models

Previous analytical and simulation-based analyses suggest that deeper land surface models are needed to realistically simulate the terrestrial thermal state in climate models, with implications for land-atmosphere interactions. Analytical approaches mainly focused on the subsurface propagation of harmonics such as the annual temperature signal, and a direct comparison with climate-change model output has been elusive. Here, this study addresses the propagation of a harmonic pulse fitted to represent the timescale and amplitude of anthropogenic warming. Its comparison to land model simulations with stepwise increased bottom boundary depth leads to an agreement between the simulation-based and analytical frameworks for long-term climate trends. Any depth increase gradually decreases the relative error in the subsurface thermodynamics, and a minimum depth of 170 m is recommended to simulate the ground climate adequately. The approach provides an accurate estimate of the required land-model depth for climate-change simulations and assesses the relative bias in insufficiently deep land models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Multi-fidelity electrochemical modeling of thermally activated battery cells

Thermally activated batteries undergo a series of coupled physical changes during activation that influence battery performance. These processes include energetic material burning, heat transfer, electrolyte phase change, capillary-driven two-phase porous flow, ion transport, electrochemical reactions, and electrical transport. Several of these processes are strongly coupled and have a significant effect on battery performance, but others have minimal impact or may be suitably represented by reduced-order models. Additionally, assessing the relative importance of these phenomena must be based on comparisons to a high-fidelity model including all known processes. In this work, we first present and demonstrate a high-fidelity, multi-physics model of electrochemical performance. This novel multi-physics model enables predictions of how competing physical processes affect battery performance and provides unique insights into the difficult-to-measure processes that happen during battery activation. We introduce four categories of model fidelity that include different physical simplifications, assumptions, and reduced-order models to decouple or remove costly elements of the simulation. Using this approach, we show an order-of-magnitude reduction in computational cost while preserving all design-relevant quantities of interest within 5 percent. The validity of this approach and these model reductions is demonstrated by comparison between results from the full fidelity model and the different reduced models.

25 ENERGY STORAGE↗
DOE OSTI2023

Fusion of Multiple Models for Improving Gross Primary Production Estimation With Eddy Covariance Data Based on Machine Learning

Abstract Terrestrial gross primary production (GPP) represents the magnitude of CO 2 uptake through vegetation photosynthesis, and is a key variable for carbon cycles between the biosphere and atmosphere. Light use efficiency (LUE) models have been widely used to estimate GPP for its physiological mechanisms and availability of data acquisition and implementation, yet each individual GPP model has exhibited large uncertainties due to input errors and model structure, and further studies of systematic validation, comparison, and fusion of those models with eddy covariance (EC) site data across diverse ecosystem types are still needed in order to further improve GPP estimation. We here compared and fused five GPP models (VPM, EC‐LUE, GOL‐PEM, CHJ, and C‐Fix) across eight ecosystems based on FLUXNET2015 data set using the ensemble methods of Bayesian Model Averaging (BMA), Support Vector Machine (SVM), and Random Forest (RF) separately. Our results showed that for individual models, EC‐LUE gave a better performance to capture interannual variability of GPP than other models, followed by VPM and GLO‐PEM, while CHJ and C‐Fix were more limited in their estimation performance. We found RF and SVM were superior to BMA on merging individual models at various plant functional types (PFTs) and at the scale of individual sites. On the basis of individual models, the fusion methods of BMA, SVM, and RF were examined by a five‐fold cross validation for each ecosystem type, and each method successfully improved the average accuracy of estimation by 8%, 18%, and 19%, respectively.

Environmental Sciences & Ecology↗
DOE OSTI2020

Discrete Fracture Network Modeling to Estimate Upscaled Parameters for the Topopah Spring, Lava Flow, and Tiva Canyon Aquifers at Pahute Mesa, Nevada National Security Site

This report describes the results of Discrete Fracture Network (DFN) simulations for the Topopah Spring Aquifer (TSA), Lava Flow Aquifer, and Tiva Canyon Aquifer (TCA), at Pahute Mesa on the Nevada National Security Site (NNSS), formerly the Nevada Test Site. The research focuses on calculating upscaled groundwater flow and contaminant transport parameters using DFNs generated according to fracture characteristics observed in the TSA, LFA and TCA at Pahute Mesa. The highly fractured and heterogeneous nature of these aquifers makes them candidates for stochastic DFN modeling of radionuclide transport on a small scale with subsequent upscaling. One hundred independent DFN realizations are generated for each aquifer, and the upscaled parameters for continuum simulations of subsurface flow and transport in fractured media at Pahute Mesa are calculated. Our goal is to implement a modeling approach that can translate parameters to larger-scale models that account for local-scale flow and transport processes, such as channelization of flow and transport along a few well connected, large fractures. Additionally, to simulate advective and advective-diffusive transport through the fracture networks, the Time Domain Random Walk (TDRW) approach is applied to account for matrix diffusion into a finite half-space. Moreover, a novel approach to calculate dynamic (active) fracture surface area to reflect flow channeling is implemented. This work will improve the representation of radionuclide transport processes in largescale, regulatory-focused models by providing estimates of hard-to-measure flow and contaminant transport parameters at large scales. In this report, we (1) show recent results of flow and transport simulations on multiple DFN realizations of the TSA, LFA, TCA; (2) discuss the resulting distributions of estimated upscaled parameters; (3) describe the estimation of upscaled parameters for an equivalent parallel-plate continuum model and (4) present a comparison between simulated transport from the equivalent continuum model and an actual DFN.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Comparison of machine learning and electrical resistivity arrays to inverse modeling for locating and characterizing subsurface targets

Here, this study evaluates the performance of multiple machine learning (ML) algorithms and electrical resistivity (ER) arrays for inversion with comparison to a conventional Gauss-Newton numerical inversion method. Four different ML models and four arrays were used for the estimation of only six variables for locating and characterizing hypothetical subsurface targets. The combination of dipole-dipole with Multilayer Perceptron Neural Network (MLP-NN) had the highest accuracy. Evaluation showed that both MLP-NN and Gauss-Newton methods performed well for estimating the matrix resistivity while target resistivity accuracy was lower, and MLP-NN produced sharper contrast at target boundaries for the field and hypothetical data. Both methods exhibited comparable target characterization performance, whereas MLP-NN had increased accuracy compared to Gauss-Newton in prediction of target width and height, which was attributed to numerical smoothing present in the Gauss-Newton approach. MLP-NN was also applied to a field dataset acquired at U.S. DOE Hanford site.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

𝛽−decay of neutron-rich 45 Cl located at the magic number 𝑁 = 28

Results from the β-decay study of 45 Cl, produced in the fragmentation of a 140-MeV/u 48 Ca beam, are presented. The half-life of 45 Cl is measured to be 513(36) ms. β – and β – 1n decay populate excited states in 45 Ar and 44 Ar, respectively, and decay schemes for both daughter nuclei are established based on γ-ray singles and γ-γ coincidence data. Comparison with shell-model calculations using the FSU interaction shows that the low-lying negative-parity states in 45 Ar are well described by single-neutron configurations near the Fermi surface, whereas positive-parity states require neutron excitations across the N = 20 shell gap, consistent with allowed Gamow–Teller decay from 45 Cl. The strong β-feeding to the 5/2 + state in 45 Ar supports a 3/2 + ground-state assignment for 45 Cl over 1/2 + . Furthermore, the high Q β – value enables population of 1p1h states above the neutron separation energy in 45 Ar, leading to positive-parity states in 44 Ar through neutron emission. Tentative spin-parity assignments for excited levels in 44 Ar are made for the first time based on comparison with shell-model predictions, and the 2978-keV level is identified as an excited 0 + state with a configuration distinct from the ground state.

39 ≤ A ≤ 58↗
DOE OSTI2025

ASME Code change proposal to implement new universal high temperature constitutive models for Section III, Division 5

This report completes work on a universal high temperature constitutive model suitable for use with the ASME Boiler & Pressure Vessel Code Section III, Division 5 rules for the design by inelastic analysis of Class A nuclear reactor components. The goals of this work are to provide a simple model form that adequately captures the high temperature response of materials and can be applied to any future Code material. Additionally, the report describes an automated process for calibrating a model against test data. The idea is to simplify the effort required to generate a constitutive model for an arbitrary material, provided test data is available. This will accelerate the process of qualifying new Code materials in the future. In addition, the report provides calibrated models and detailed validation comparisons to test data for five currently-qualified or soon-to-be qualified materials: 316H, Grade 91, Alloy 800H, Alloy 617, and Alloy 709. The report surveys the available data for the remaining two ASME Class Materials --- 2.25Cr-1Mo and 304H --- concluding that there is enough data data to generate a model for 2.25Cr-1Mo steel provided some additional sources of non-public data can be included in the test database, but that a dedicated cyclic test campaign would be needed for 304H. Supplemental material includes the full text of an ASME Code change proposal to incorporate the models for the four currently-qualified Class A material, detailed validation comparisons to test data for the five material models, and input files for reference implementations of the constitutive models in the NEML and NEML2 modeling frameworks.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2023

Advective gas flow in bentonite: Development and comparison of enhanced multi-phase numerical approaches

Understanding the impact of repository gas, generated from degradation of waste and its interaction with the host rock, is essential when assessing the performance and safety function of long-term disposal systems for radioactive waste. Numerical models based on conventional multi-phase flow theory have historically been applied to predict the outcome and impact of gas flow on different repository components. However, they remain unable to describe the full complexity of the physical processes observed in water-saturated experiments (e.g., creation of dilatant pathways) and thus, the development of novel representations for their description is required when assessing fully saturated clay-based systems. This was the primary focus of Task A within the international cooperative project DECOVALEX-2019 (D-2019) and refinement of these approaches is the primary focus of this study (Task B in the current phase of DECOVALEX-2023). This paper summarises development of enhanced numerical representations of key processes and compares the performance of each model against high-quality laboratory test data. Experimental data reveals that gas percolation in water-saturated compacted bentonite is characterised by four key features: (i) a quiescence phase, followed by (ii) the gas breakthrough, which leads to a (iii) peak value, which is then followed by (iv) a negative decay. Three models based on the multiphase flow theory have been developed. These models can provide good initial values and reasonable responses for gas breakthrough (although some of them still predict a too-smooth response). Peak gas pressure values are in general reasonably well captured, although maximum radial stress differences are observed at 48 mm from the base of the sample. Here, numerical peak values of 12.8 MPa are predicted, whereas experimental values are about 11 MPa. These models are also capable of providing a reasonable representation of the negative pressure decay following peak pressure. However, other key specific features (such as the timing of gas breakthrough) still require a better representation. The model simulations and their comparison with experimental data show that these models need to be further improved with respect to model parameter calibration, the numerical representation of spatial heterogeneities in material properties and flow localisation, and the upscaling of the related physical processes and parameters. To further understand gas flow localisation, a new conceptual model has been developed, which shows that discrete channels can possibly be induced through the instability of gas-bentonite interface during gas injection, thus providing a new perspective for modeling gas percolation in low-permeability deformable media.

58 GEOSCIENCES↗
DOE OSTI2020

γ-ray measurements in fast-neutron-induced reactions on 203 Tl

Fast-neutron-induced reactions can be used to characterize reaction mechanisms, investigate nuclear structure, and impose constraints on nuclear models. Because of the difficulty in predicting such effects, experimental data are important to constrain models. Thallium isotopes located close to the doubly magic Pb 208 nucleus are important for comparison with shell-model calculations. Study the population of excited states in Tl 203 and lighter isotopes in such reactions. Our methods are as follows. γ -ray cross sections were measured. The data were taken by using the Germanium Array for Neutron-Induced Excitations spectrometer. The pulsed neutron source of the Los Alamos Neutron Science Center's Weapons Neutron Research facility provided neutrons in the energy range from 1 to 300 MeV. The time-of-flight technique was used to determine the incident neutron energies. Cross sections for emission of several γ rays in 20 reaction channels were determined. Candidates for the intruder 9 / 2 - state in Tl 203 , from the odd proton in the h 9 / 2 orbital, and the first 5 + states in Tl 202 , 204 , from admixture of configurations, were identified. The excitation energy of the candidate 9 / 2 - , π h 9 / 2 state is in good agreement with the theoretical prediction from a semi-empirical weak-coupling model and its half-life is in the range of tens of nanoseconds. The feeding of a previously known isomer in Tl 202 exhibits similarities with the feeding of other isomers in this mass region.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

PCMDI Metrics Package

The Program for Climate Model Diagnosis & Intercomparison (PCMDI) Metrics Package (PMP) is used to provide "quick-look" objective comparisons of Earth System Models (ESMs) with one another and available observations. The PMP provides a diverse suite of analysis utilities each of which produce summary statistics that gauge the consistency between climate model simulations and available observations. The primary application of the PMP is to evaluate simulations from the Coupled Model Intercomparison Project (CMIP). It can also be used to provide objective performance summaries during the model development process as well as selected research purposes.

Ullrich, PaulA [Lawrence Livermore National Labora↗