Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “integral equations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Analysis of a unidirectional composite containing broken fibers and matrix damage

An analytical solution is developed for the determination of the stresses and displacements in a unidirectional fiber-reinforced composite containing an arbitrary number of broken fibers as well as longitudinal yielding and splitting of the matrix. The solution is developed using a 'materials-modeling' approach which is based on a shear-lag stress transfer mechanism. The equilibrium equation in the axial direction gives a pair of integral equations which are solved numerically. Excellent agreement is shown to exist between the solution and experimental results for notched unidirectional boron/aluminum laminates without splitting. For brittle matrix composites (i.e., epoxy) equally good results are indicated for both matrix yielding and splitting. For yielding without splitting the fracture strength is found to depend on crack length while for large splitting it is crack length independent.

Goree, J. G.↗

Estimating location parameters in a mixture

The problem of estimating the parameters in a finite mixture is considered. The approach is based on an integral equation formulation of the form h sub t (x) = integral (limits b and a) f(x-y) g sut t (y)dy where h sub t is a smoothed version of h and g sub t is a prior function that tends to be concentrated on the translation values. A solution for g sub t that uses the method of regularization and one based on a posterior operator approach is considered. Numerical simulations are presented to bring out some of the estimation and numerical problems of these approaches.

Heydorn, R. P.↗

Electron beam dispersion measurements in nitrogen using two-dimensional imaging of N2(+) fluorescence

Experimental results are presented related to the radial spread of fluorescence excited by 10 and 20 KeV electron beams passing through nonflowing rarefied nitrogen at 293 K. An imaging technique for obtaining species distributions from measured beam-excited fluorescence is described, based on a signal inversion scheme mathematically equivalent to the inversion of the Abel integral equation. From fluorescence image data, measurements of beam radius, integrated signal intensity, and spatially resolved distributions of N2(+) first-negative-band fluorescence-emitting species have been made. Data are compared with earlier measurements and with an heuristic beam spread model.

Clapp, L. H.↗

The Radiated Field Generated by a Monopole Source in a Short, Rigid, Rectangular Duct

This thesis develops a method to model the acoustic field generated by a monopole source placed in a moving rectangular duct. The walls of the duct are assumed to be infinitesimally thin and the source is placed at the center of the duct. The total acoustic pressure is written in terms of the free-space pressure, or incident pressure, and the scattered pressure. The scattered pressure is the augmentation to the incident pressure due to the presence of the duct. It satisfies a homogeneous wave equation and is discontinuous across the duct walls. Utilizing an integral representation of the scattered pressure, a set of singular boundary integral equations governing the unknown jump in scattered pressure is derived. This equation is solved by the method of collocation after representing the jump in pressure as a double series of shape functions. The solution obtained is then substituted back into the integral representation to determine the scattered pressure, and the total acoustic pressure at any point in the field. A few examples are included to illustrate the influence of various geometric and kinematic parameters on the radiated sound field.

Lakota, Barbara Anne↗

Three-body scattering from nonperturbative flow equations

We consider fermion-dimer scattering in the presence of a large positive scattering length in the frame of functional renormalization group equations. A flow equation for the momentum dependent fermion-dimer scattering amplitude is derived from first principles in a systematic vertex expansion of the exact flow equation for the effective action. The resummation obtained from the nonperturbative flow is shown to be equivalent to the one performed by the integral equation by Skorniakov and Ter-Martirosian (STM). The flow equation approach allows to integrate out fermions and bosons simultaneously, in line with the fact that the bosons are not fundamental but build up gradually as fluctuation induced bound states of fermions. In particular, the STM result for atom-dimer scattering is obtained by choosing the relative cutoff scales of fermions and bosons such that the fermion fluctuations are integrated out already at the initial stage of the RG evolution.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Efficient high-order singular quadrature schemes in magnetic fusion

Several problems in magnetically confined fusion, such as the computation of exterior vacuum fields or the decomposition of the total magnetic field into separate contributions from the plasma and the external sources, are best formulated in terms of integral equation expressions. Based on Biot–Savart-like formulae, these integrals contain singular integrands. The regularization method commonly used to address the computation of various singular surface integrals along general toroidal surfaces is low-order accurate, and therefore requires a dense computational mesh in order to obtain sufficient accuracy. In this work, we present a fast, high-order quadrature scheme for the efficient computation of these integrals. Several numerical examples are provided demonstrating the computational efficiency and the high-order accurate convergence. A corresponding code for use in the community has been publicly released.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Faddeev and Glauber calculations at intermediate energies in a model for n+d scattering

Obtaining cross sections for nuclear reactions at intermediate energies based on the Glauber formulation has a long tradition. Only recently the energy regime of a few hundred MeV has become accessible to ab initio Faddeev calculations of three-body scattering. In order to go to higher energies, the Faddeev equation for three-body scattering is formulated and directly solved without employing a partial wave decomposition. In the simplest form the Faddeev equation for interacting scalar particles is a three-dimensional integral equation in five variables, from which the total cross section, the cross sections for elastic scattering and breakup reactions, as well as differential cross sections are obtained. The same observables are calculated based on the Glauber formulation. The first order Glauber calculation and the Glauber rescattering corrections are compared in detail with the corresponding terms of the Faddeev multiple scattering series for projectile energies between 100 MeV and 2 GeV.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Algorithms For Integrating Nonlinear Differential Equations

Improved algorithms developed for use in numerical integration of systems of nonhomogenous, nonlinear, first-order, ordinary differential equations. In comparison with integration algorithms, these algorithms offer greater stability and accuracy. Several asymptotically correct, thereby enabling retention of stability and accuracy when large increments of independent variable used. Accuracies attainable demonstrated by applying them to systems of nonlinear, first-order, differential equations that arise in study of viscoplastic behavior, spread of acquired immune-deficiency syndrome (AIDS) virus and predator/prey populations.

Freed, A. D.↗

A Novel Multigrid Method for Sn Discretizations of the Mono-Energetic Boltzmann Transport Equation in the Optically Thick and Thin Regimes with Anisotropic Scattering, Part I

This paper presents a new multigrid method applied to the most common Sn discretizations (Petrov-Galerkin, diamond-differenced, corner-balanced, and discontinuous Galerkin) of the mono-energetic Boltzmann transport equation in the optically thick and thin regimes, and with strong anisotropic scattering. Unlike methods that use scalar DSA diffusion preconditioners for the source iteration, this multigrid method is applied directly to an integral equation for the scalar flux. Thus, unlike the former methods that apply a multigrid strategy to the scalar DSA diffusion operator, this method applies a multigrid strategy to the integral source iteration operator, which is an operator for 5 independent variables in spatial 3-d (3 in space and 2 in angle) and 4 independent variables in spatial 2-d (2 in space and 2 in angle). The core smoother of this multigrid method involves applications of the integral operator. Since the kernel of this integral operator involves the transport sweeps, applying this integral operator requires a transport sweep (an inversion of an upper triagular matrix) for each of the angles used. As the equation is in 5-space or 4-space, the multigrid approach in this paper coarsens in both angle and space, effecting efficient applications of the coarse integral operators. Although each V-cycle of this method is more expensive than a V-cycle for the DSA preconditioner, since the DSA equation does not have angular dependence, the overall computational efficiency is about the same for problems where DSA preconditioning {\it is} effective. This new method also appears to be more robust over all parameter regimes than DSA approaches. Moreover, this new method is applicable to a variety of Sn spatial discretizations, to problems involving a combination of optically thick and thin regimes, and more importantly, to problems with anisotropic scattering cross-sections, all of which DSA approaches perform poorly or not applicable at all. This multigrid approach is most effective in neutron scattering applications, where the total cross-section coefficient $\sigma_t$ and spatial meshsize $h$ satisfies $\sigma_t h\approx 1.$ For this case, coarsening can be done aggressively. For problems with $\sigma_t h\approx 10,$ this multigrid scheme requires a moderately coarsened multiple-coarsening scheme. An even slow coarsening, an angle semi-coarsening, is required for problems with $\sigma_t h$ ranges between 100 and 1000, which occur in high-energy photon applications.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Theoretical analysis of integral neutron transport equation using collision probability method with quadratic flux approach

Theoretical analysis of integral neutron transport equation using collision probability (CP) method with quadratic flux approach has been carried out. In general, the solution of the neutron transport using the CP method is performed with the flat flux approach. In this research, the CP method is implemented in the cylindrical nuclear fuel cell with the spatial of mesh being conducted into non flat flux approach. It means that the neutron flux at any point in the nuclear fuel cell are considered different each other followed the distribution pattern of quadratic flux. The result is presented here in the form of quadratic flux that is better understanding of the real condition in the cell calculation and as a starting point to be applied in computational calculation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Logarithmic forms and differential equations for Feynman integrals

We describe in detail how a d log representation of Feynman integrals leads to simple differential equations. We derive these differential equations directly in loop momentum or embedding space making use of a localization trick and generalized unitarity. For the examples we study, the alphabet of the differential equation is related to special points in kinematic space, described by certain cut equations which encode the geometry of the Feynman integral. At one loop, we reproduce the motivic formulae described by Goncharov [1] that reappeared in the context of Feynman integrals in [2–4]. The d log representation allows us to generalize the differential equations to higher loops and motivates the study of certain mixed-dimension integrals.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dynamic response of a plane-symmetrical exothermic reaction center.

?sger,An analysis of the dynamic behavior of an idealized, plane-symmetrical exothermic reaction center is presented. The conservation equations for the reaction center are combined and yield a single integral equation expressing a nonlinear transfer function of the system for which the input is provided by a given time profile of the heat released per unit mass while the output gives the pressure pulse it generates under the restriction of plane-symmetrical motion. The solution is governed by a Daumk]hler number. For a given form of the exothermic power pulse profile, the dynamic behavior of the system is completely specified in terms of only this Daumk]hler number and the heat of reaction per unit mass of the combustible medium. Specific solutions are worked out for a set of typical elementary power pulse profiles, and the practical significance of the results is illustrated by their application to the problem of transition to detonation in an explosive gas.

Meyer, J. W.↗

A finite element-boundary integral method for cavities in a circular cylinder

Conformal antenna arrays offer many cost and weight advantages over conventional antenna systems. However, due to a lack of rigorous mathematical models for conformal antenna arrays, antenna designers resort to measurement and planar antenna concepts for designing non-planar conformal antennas. Recently, we have found the finite element-boundary integral method to be very successful in modeling large planar arrays of arbitrary composition in a metallic plane. We extend this formulation to conformal arrays on large metallic cylinders. In this report, we develop the mathematical formulation. In particular, we discuss the shape functions, the resulting finite elements and the boundary integral equations, and the solution of the conformal finite element-boundary integral system. Some validation results are presented and we further show how this formulation can be applied with minimal computational and memory resources.

Kempel, Leo C.↗

Determination of the Contact Angle Based on the Casimir Effect

In several crystal growth processed based on capillarity, a melt comes into contact with a crucible wall at an angle defined as the contact angle. For molten metals and semiconductors, this contact angle is dependent upon both the crucible and melt material and typical values fall in the range 80-170deg. However, on a microscopic scale, there does not exist a precise and sharp contact angle but rather the melt and solid surfaces merge smoothly and continuously over a distance of up to several micrometers. Accurate modeling requires a more advanced treatment of this interaction. The interaction between the melt and solid surfaces can be calculated by considering two forces: a short-range repulsive force and a longer range (up to a few micrometers) Casimir force. The Casimir force between the two bodies of complex geometry is calculated using a retarded temperature Green's function (Matsubara type) for the photon in the medium. The governing equations are cast in the form of a set of boundary integral equations which are then solved numerically for the case of molten Ge on SiO2. The shape of the molten surface approaching the flat solid body is determined, and the contact angle is defined as the angle between the two surfaces at the microscopically asymptotic distance of 1-2 micrometers. The formulation of this model and the results of the numerical calculations will be presented and discussed.

Mazuruk, K.↗

Discrete integration of continuous Kalman filtering equations for time invariant second-order structural systems

A general form for the first-order representation of the continuous second-order linear structural-dynamics equations is introduced to derive a corresponding form of first-order continuous Kalman filtering equations. Time integration of the resulting equations is carried out via a set of linear multistep integration formulas. It is shown that a judicious combined selection of computational paths and the undetermined matrices introduced in the general form of the first-order linear structural systems leads to a class of second-order discrete Kalman filtering equations involving only symmetric sparse N x N solution matrices.

Park, K. C.↗

Engineering integrable nonautonomous nonlinear Schroedinger equations

We investigate Painleve integrability of a generalized nonautonomous one-dimensional nonlinear Schroedinger (NLS) equation with time- and space-dependent dispersion, nonlinearity, and external potentials. Through the Painleve analysis some explicit requirements on the dispersion, nonlinearity, dissipation/gain, and the external potential as well as the constraint conditions are identified. It provides an explicit way to engineer integrable nonautonomous NLS equations at least in the sense of Painleve integrability. Furthermore analytical solutions of this class of integrable nonautonomous NLS equations can be obtained explicitly from the solutions of the standard NLS equation by a general transformation. The result provides a significant way to control coherently the soliton dynamics in the corresponding nonlinear systems, as that in Bose-Einstein condensate experiments. We analyze explicitly the soliton dynamics under the nonlinearity management and the external potentials and discuss its application in the matter-wave dynamics. Some comparisons with the previous works have also been discussed.

97 MATHEMATICS AND COMPUTING↗