Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “injection rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Narrowband Rejection of Reaction Wheel and Environmental Disturbances for the WFIRST OMC Testbed

The Wide Field Infrared Survey Telescope (WFIRST) is a NASA observatory with two scientific instruments. The first is the Wide Field Instrument (WFI) designed to perform wide field imaging and surveys of the near infrared (NIR) sky. The second is a coronagraph (CGI) that will enable astronomers to detect and measure properties of planets in other solar systems. The coronagraph requires 0.5 milli-arcsecond (mas) RMS pointing per axis of the line of sight (LOS) to achieve a contrast of 1x10-9. This paper discusses the approach used for achieving this level of pointing performance on the occulting mask coronagraph (OMC) testbed at JPL. This testbed uses a low-order wavefront sensing (LOWFS) camera and fast steering mirror (FSM) to suppress injected LOS jitter and environmental LOS jitter. The injected jitter includes representative broadband spacecraft attitude control system (ACS) LOS motion and tonal LOS jitter caused by the reaction wheel assemblies (RWA). The environmental jitter includes thermal LOS variations and harmonics of the line noise. The LOWFS camera uses high flux from the obscured science target to achieve high rate measurements of the LOS. These measurements are augmented with fictitious RWA tachometer information and an estimate of the line noise frequency. A LOS servo using a combination of feedback and feedforward control is used in the testbed to compensate for all of the disturbance sources and to mitigate jitter caused by in-band camera noise. The feedforward uses a novel robust least mean squares (RLMS) filter algorithm to reject the RWA and line frequency tones. High fidelity models of the sensors, disturbances and actuator are presented in this paper. These models were developed as part of a simulation of the LOS control system. Performance results from the hardware testbed at the Jet Propulsion Laboratory (JPL) are discussed in this paper.

Shields, Joel↗
NASA NTRS1974

Heating analysis for the Pioneer Venus multiprobe mission

The fully coupled, radiating flow field around the entry probes is determined from a detailed calculation which includes equilibrium chemistry, nongray radiative transport, ablation product injection, and a laminar or turbulent boundary layer. Results show that the radiative flux toward the body is attenuated in the boundary layer at downstream regions of the body as well as at the stagnation point and that, even when radiation absorption by ablation products is accounted for, the radiative heating rates along the downstream regions of the body can, under certain conditions, exceed the stagnation point values. It is also shown that, for Venusian entry, the spectral distribution of radiative flux and the magnitude of radiation absorption by ablation products depend strongly on entry velocity, and that the state of the boundary layer can significantly influence the amount of ablation product absorption or emission that occurs in various spectral regions.

Sutton, K.↗
NASA NTRS1976

Heavy ions from the Galilean satellites and the centrifugal distortion of the Jovian magnetosphere

The Galilean satellites constitute a potentially significant source of plasma to the Jovian atmosphere. The paper examines the distortion of the Jovian magnetosphere that would result from injection of ions at the Galilean satellites. The magnetic distortion produced is a localized perturbation near the equatorial plane, in contrast to the large-scale distortion produced by Jovian atmospheric ions. The study estimates the relative perturbation currents resulting from the two sources in terms of the unknown ion production rate at the satellites. It is found that the two perturbations would be of comparable magnitudes if the ion source flux at all of the Galilean satellites were comparable to the photo-ion escape flux from Jupiter's atmosphere. More specifically, ions produced by the Galilean satellites should be confined near the equatorial plane of Jupiter's magnetosphere in a sheet whose thickness is determined by a centrifugal scale height given essentially by the ion thermal speed divided by the corotation frequency.

Hill, T. W.↗
NASA NTRS1989

Antiproton powered propulsion with magnetically confined plasma engines

The reaction of the matter-antimatter annihilation, with its specific energy being over 250 times the specific energy released in nuclear fusion, is considered as an energy source for spacecraft propulsion. A concept of a magnetically confined pulsed plasma engine is described. In this concept, antiproton beams are injected axially into a pulsed magnetic mirror system, where they annihilate with an initially neutral hydrogen gas; the resulting charge annihilation products transfer energy to the hydrogen propellant, which is then exhausted through one end of the pulsed mirror system to provide thrust. Numerical simulations were developed to calculate the annihilation rate of antiprotons in hydrogen and to follow the resulting ion, muon, and electron/positron number density evolutions.

Lapointe, Michael R.↗
NASA NTRS1985

Quantitative determination of microbial activity and community nutritional status in estuarine sediments: evidence for a disturbance artifact

In estuarine sediments with a high degree of vertical heterogeneity in reduced substrate and terminal electron acceptor concentrations, the method of exposure of the microbiota to labeled substrates can introduce a "disturbance artifact" into measures of metabolic activity. The detection of this artifact is based on quantitative measurement of the relative rates of incorporation of [14C]acetate into phospholipid fatty acids (PLFA) and endogenous storage lipid, poly-beta-hydroxyalkanoate (PHA). Previous studies have shown that PLFA synthesis measures cellular growth and that PHA synthesis measures carbon accumulation (unbalanced growth). The "disturbance artifact" of exposure to [14C]acetate was demonstrated by comparing injection of a core with the usual or pore-water replacement or slurry techniques. Only injection of labeled substrate allowed detection of preassay disturbance of the sediment with a garden rake. The raking increased PLFA synthesis with little effect to differences in concentration or distribution of [14C]acetate in the 10-min incubation. Bioturbation induced by sand dollar feeding in estuarine sediment could be detected in an increased PLFA/PHA ratio which was due to decreased PHA synthesis if the addition of labeled substrate was by the injection technique. Addition of labeled precursors to sediment by slurry or pore-water replacement induces greater disturbance artifacts than injection techniques.

Phospholipids/analysis/biosynthesis↗
NASA NTRS1999

Experimental Investigation of Pool Boiling Heat Transfer Enhancement in Microgravity in the Presence of Electric Fields

In boiling high heat fluxes are possible driven by relatively small temperature differences, which make its use increasingly attractive in aerospace applications. The objective of the research is to develop ways to overcome specific problems associated with boiling in the low gravity environment by substituting the buoyancy force with the electric force to enhance bubble removal from the heated surface. Previous studies indicate that in terrestrial applications nucleate boiling heat transfer can be increased by a factor of 50, as compared to values obtained for the same system without electric fields. The goal of our research is to experimentally explore the mechanisms responsible for EHD heat transfer enhancement in boiling in low gravity conditions, by visualizing the temperature distributions in the vicinity of the heated surface and around the bubble during boiling using real-time holographic interferometry (HI) combined with high-speed cinematography. In the first phase of the project the influence of the electric field on a single bubble is investigated. Pool boiling is simulated by injecting a single bubble through a nozzle into the subcooled liquid or into the thermal boundary layer developed along the flat heater surface. Since the exact location of bubble formation is known, the optical equipment can be aligned and focused accurately, which is an essential requirement for precision measurements of bubble shape, size and deformation, as well as the visualization of temperature fields by HI. The size of the bubble and the frequency of bubble departure can be controlled by suitable selection of nozzle diameter and mass flow rate of vapor. In this approach effects due to the presence of the electric field can be separated from effects caused by the temperature gradients in the thermal boundary layer. The influence of the thermal boundary layer can be investigated after activating the heater at a later stage of the research. For the visualization experiments a test cell was developed. All four vertical walls of the test cell are transparent, and they allow transillumination with laser light for visualization experiments by HI. The bottom electrode is a copper cylinder, which is electrically grounded. The copper block is heated with a resistive heater and it is equipped with 6 thermocouples that provide reference temperatures for the measurements with HI. The top electrode is a mesh electrode. Bubbles are injected with a syringe into the test cell through the bottom electrode. The working fluids presently used in the interferometric visualization experiments, water and PF 5052, satisfy requirements regarding thermophysical, optical and electrical properties. A 30kV power supply equipped with a voltmeter allows to apply the electric field to the electrodes during the experiments. The magnitude of the applied voltage can be adjusted either manually or through the LabVIEW data acquisition and control system connected to a PC. Temperatures of the heated block are recorded using type-T thermocouples, whose output is read by a data acquisition system. Images of the bubbles are recorded with 35mm photographic and 16mm high-speed cameras, scanned and analyzed using various software packages. Visualized temperature fields HI allows the visualization of temperature fields in the vicinity of bubbles during boiling in the form of fringes. Typical visualized temperature distributions around the air bubbles injected into the thermal boundary layer in PF5052 are shown. The temperature of the heated surface is 35 C. The temperature difference for a pair of fringes is approximately 0.05 C. The heat flux applied to the bottom surface is moderate, and the fringe patterns are regular. In the image a bubble penetrating the thermal boundary layer is visible. Because of the axial symmetry of the problem, simplified reconstruction techniques can be applied to recover the temperature field. The thermal plume developing above the heated surface for more intensive heating is shown. The temperature distribution in the liquid is clearly 3D, and tomographic techniques have to be applied to recover the temperature distribution in such a physical situation. A sequence of interferometric images showing the temperature distribution around the rising bubble, recorded with a high-speed camera is shown. Again, the temperature distribution is 3D, and a more complex approach to the evaluation, the tomographic reconstruction has to be taken. Measurement of the temperature distribution from the fringe pattern temperature distributions that yield important information regarding heat transfer are determined. Two algorithms that allow the quantitative evaluation of interferometric fringe patterns and the reconstruction of temperature fields during boiling have been developed at the Heat Transfer Laboratory of the Johns Hopkins University. In the first algorithm the bubble is assumed to be axially symmetrical, which significantly reduces the computational effort for quantifying the temperature distribution around the bubble. For this purpose the thermal boundary layer around the bubble is divided into equidistant concentric shells, and the refractive index is assumed to be constant in each of the shells. Since large temperature gradients are expected in the vicinity of the bubble during boiling, the deflection of the light beam cannot be neglected in boiling experiments. Since the exit angle of the light beam is known, this allows to account for the deflections and phase shifts outside the boundary layer (in the bulk fluid and in the windows of the test cell). Three dimensional temperature distributions in the vicinity of the bubble are reconstructed using tomographic techniques. In tomography, the measurement volume is sliced into 2D planes. In the present study these planes are parallel to the heated surface. The objective is to determine the values of the field parameter of interest in form of the field function in these 2D planes. The field parameter is the change of the refractive index of the liquid in the measurement volume caused by temperature changes. By superimposing data for many 2D planes recorded at the same time instant, the 3D temperature distribution in the measurement volume is recovered.

Herman, Cila↗
NASA NTRS1980

Solar Power Satellite (SPS) fiber optic link assessment

A feasibility demonstration of a 980 MHz fiber optic link for the Solar Power Satellite (SPS) phase reference distribution system was accomplished. A dual fiber-optic link suitable for a phase distribution frequency of 980 MHz was built and tested. The major link components include single mode injection laser diodes, avalanche photodiodes, and multimode high bandwidth fibers. Signal throughput was demonstrated to be stable and of high quality in all cases. For a typical SPS link length of 200 meters, the transmitted phase at 980 MHz varies approximately 2.5 degrees for every deg C of fiber temperature change. This rate is acceptable because of the link length compensation feature of the phase control design.

Source record↗
NASA NTRS1983

Advanced Automotive Diesel Assessment Program, executive summary

The objectives of this analytical study were: to select one advanced automotive diesel engine (AAD) concept which would increase the tank mileage of a 3,000 pound passenger car from the present 35 mpg to at least 52 mpg; to identify long term component research and development work required to bring the selected concept to fruition; and to prepare a development strategy that will bring the selected concept to a prototype testing phase. Cummins Engine Company has completed this study. The selected concept is a 4 stroke cycle, direct injection, spark assisted, advanced adiabatic diesel engine with positive displacement compounding plus expander and part load air preheating. The engine does not use a liquid coolant nor liquid lubricants. It is a 4 cylinder, in-line, 77 mm bore x 77 mm stroke, 1.434 liters displacement engine weighing 300 lb, and rated at 70 BHP at 3000 rpm. Installation dimensions are 621 mm length x 589 mm width x 479 mm height (24.4 inch x 22 inch x 18.9 inch).

Source record↗
NASA NTRS1987

Remote measurement of in-plane diffusivity components in plates

A method of determining thermal diffusivity in thin plates is presented. The method, using infrared images of evolving thermal patterns previously injected with a laser, is noncontacting, one-sided, and remote. It does not require independent estimates of either the emissivity of the sample or the sample thickness. With a line-segment pattern for thermal input, it yields the inplane components of the diffusivity tensor in anisotropic materials and also the rate of heat loss to the environment of the plate. Two methods of data analysis are presented, one corresponding to a heating line of general cross section and the other considering a Gaussian cross section, thereby saving considerable computer time. Both methods produce a statistical evaluation of measurement quality as well as estimates of diffusivity and loss rate. Results are shown for plates of metals and graphite-epoxy composite materials. Principal components and orientation for the diffusivity tensor are obtained in the anisotropic graphite-epoxy sample.

Welch, Christopher S.↗
NASA NTRS1987

Magnetospheric plasma sputtering of Io's atmosphere

Neutral coronae due to magnetospheric ion sputtering from the exobase are generated, and ion and neutral injection into the plasma torus are calculated, on the assumption of the existence of an atmosphere on Io and a consideration of that atmosphere's various possible characteristics. Through the inclusion of the sputtered atmospheric corona that emerges from an assumed unattenuated incident ion flux, it becomes possible to satisfy the supply rate to the torus with an exobase that is close to the surface; such an exobase would imply that the Io atmosphere is insufficiently robust to support a fully dissociated corona, and that a significant fraction of the incident plasma ions can penetrate to the surface to furnish a sputter source of atmospheric gas.

Mcgrath, M. A.↗
NASA NTRS1988

Moving wall, continuous flow electronphoresis apparatus

This invention relates generally to electrophoresis devices and more particularly to a moving wall, continuous flow device in which an electrophoresis chamber is angularly positionable with respect to the direction of moving belt walls. A frame with an electrophoresis chamber is rotatably supported between two synchronously driven belt walls. This allows the chamber to be angularly positionable with respect to the direction of belt travel, which compensates for electroosmotic flow within the electrophoresis chamber. Injection of a buffer solution via an opening and a homogenous sample stream via another opening is performed at the end of a chamber, and collection of buffer and the fractionated species particles is done by a conventional collection array at an opposite end of the chamber. Belts are driven at a rate which exactly matches the flow of buffer and sample through the chamber, which entrains the buffer to behave as a rigid electrophoretic medium, eliminating flow distortions (Poiseuille effect). Additionally, belt material for each belt is stored at one end of the device and is taken up by drive wheels at an opposite end. The novelty of this invention particularly lies in the electrophoresis chamber being angularly positionable between two moving belt walls in order to compensate for electroosmotic flow. Additionally, new belt material is continuously exposed within the chamber, minimizing flow distortion due to contamination of the belt material by the sample.

Rhodes, Percy H.↗
NASA NTRS1993

The PIT MkV pulsed inductive thruster

The pulsed inductive thruster (PIT) is an electrodeless, magnetic rocket engine that can operate with any gaseous propellant. A puff of gas injected against the face of a flat (spiral) coil is ionized and ejected by the magnetic field of a fast-rising current pulse from a capacitor bank discharge. Single shot operation on an impulse balance has provided efficiency and I(sub sp) data that characterize operation at any power level (pulse rate). The 1-m diameter MkV thruster concept offers low estimated engine mass at low powers, together with power capability up to more than 1 MW for the 1-m diameter design. A 20 kW design estimate indicates specific mass comparable to Ion Engine specific mass for 10,000 hour operation, while a 100,000 hour design would have a specific mass 1/3 that of the Ion Engine. Performance data are reported for ammonia and hydrazine. With ammonia, at 32 KV coil voltage, efficiency is a little more than 50 percent from 4000 to more than 8000 seconds I(sub sp). Comparison with data at 24 and 28 kV indicates that a wider I(sub sp) range could be achieved at higher coil voltages, if required for deep space missions.

Dailey, C. Lee↗
NASA NTRS1992

Effect of magnetic helicity upon rectilinear propagation of charged particles in random magnetic fields

When charged particles spiral along a large constant magnetic field, their trajectories are scattered by any random field components that are superposed on the guiding field. If the random field configuration embodies helicity, the scattering is asymmetrical with respect to a plane perpendicular to the guiding field, for particles moving into the forward hemisphere are scattered at different rates from those moving into the backward hemisphere. This asymmetry gives rise to new terms in the transport equations that describe propagation of charged particles. Helicity has virtually no impact on qualitative features of the diffusive mode of propagation. However, characteristic velocities of the coherent modes that appear after a highly anisotropic injection exhibit an asymmetry related to helicity. Explicit formulas, which embody the effects of helicity, are given for the anisotropies, the coefficient diffusion, and the coherent velocities. Predictions derived from these expressions are in good agreement with Monte Carlo simulations of particle transport, but the simulations reveal certain phenomena whose explanation calls for further analytical work.

Earl, James A.↗
NASA NTRS1994

Effects of Prostaglandin E2 and Risedronate Administration on Cancellous Bone in Older Female Rats

The effects of Prostaglandin E2 (PGE2) and Risedronate (Ris) both separately and in combination (PGE2 + Ris) were studied on the intact aged female rat skeleton to determine whether the combination of PGE2 with an antiresorptive agent is more effective anabolically than PGE2 alone. Nine month-old Sprague-Dawley rats were injected subcutaneously either with vehicle, 6 mg PGE2/kg per day, 1 or 5 microgram Ris/kg twice a week, or 6 mg PGE2/kg per day plus 1 or 5 microgram Ris/kg twice a week (PGE2 + 1 Ris or PGE2 + 5 Ris) for 60 days. After the treatment, we determined the longitudinal bone growth rate, the qualitative appearance of the primary spongiosa (PS), and the static and dynamic bone histomorphometry of the secondary spongiosa (SS) of the proximal tibial metaphysis (PTM) by examining undecalcified longitudinal sections after double fluorescent labeling. The relative effects of these treatments on longitudinal bone growth were ranked as follows: PGE2 + 5 Ris greater than PGE2 + 1 Ris = basal greater than PGE2 greater than 1 microgram Ris = 5 microgram Ris = aging. The density of the PS was ranked as follows: PGE2 + 5 Ris greater than PGE2 + 1 Ris = PGE2 = 5 microgram Ris = 1 microgram Ris greater than basal = aging. The increase in density of the PS was the result of stimulated longitudinal growth and the action of bisphosphonate. Bone mass in the SS was ranked as follows: PGE2 + 5 Ris = PGE2 + 1 Ris = PGE2 greater than 5 microgram Ris = 1 microgram Ris = aging = basal. However, PGE2 alone and its cotreatment with Ris accumulated bone by different tissue mechanisms. PGE2 alone created new bone by increasing activation frequency 8.3-fold and the formation to resorption ratio 1.3-fold from the controls. The combination of PGE2 and Ris depressed activation frequency (-54% to -74%), and bone formation rate (tissue-based -31%, and bone-based -42%) and eroded surface (-79% to -81%), so as to increase the formation to resorption ratio (three- to four-fold) over PGE2 alone. The increased ratio was due primarily to a greater decrease in eroded perimeter than in labeled perimeter. The major finding of this study is that the combination of PGE2 and a bisphosphonate (Ris) is more anabolic than PGE2 or Ris alone when endochondral ossification is active, but PGE2 + Ris is no more anabolic than PGE2 alone in old bone without endochondral ossification. However, the tissue mechanisms by which PGE2 alone and PGE2 + Ris treatments accumulated bone differed in that the latter allowed the same bone mass to accumulate with lower levels of cell recruitment and activity.

Lin, B. Y.↗
NASA NTRS2016

Modeling the Rapid Boil-Off of a Cryogenic Liquid When Injected into a Low Pressure Cavity

Many launch vehicle cryogenic applications require the modeling of injecting a cryogenic liquid into a low pressure cavity. The difficulty of such analyses lies in accurately predicting the heat transfer coefficient between the cold liquid and a warm wall in a low pressure environment. The heat transfer coefficient and the behavior of the liquid is highly dependent on the mass flow rate into the cavity, the cavity wall temperature and the cavity volume. Testing was performed to correlate the modeling performed using Thermal Desktop and Sinda Fluint Thermal and Fluids Analysis Software. This presentation shall describe a methodology to model the cryogenic process using Sinda Fluint, a description of the cryogenic test set up, a description of the test procedure and how the model was correlated to match the test results.

Fluid Mechanics↗
NASA NTRS1979

Turnover of Biogenic Amines in the Hypothalamus of Rats during Pyrogen Fever

Many pharmacological studies have implicated the biogenic amines in the hypothalamus as playing a role in the production of fever, but few investigations of endogenous neurochemicals have been made during fever. Turnover rates of transmitters utilizing radioactive precursors may be one of the most accurate measurements of activity in brain regions. The present study was designed to measure the turnover of 5-hydroxytryptamine (5-HT) norepinephrine (NE) and dopamine (DA) in the hypothalamus of rats during pyrogen fever. Salmonella typhosa (Wyeth, 8 units) was previously found in our laboratory to produce a significant hyperthermia in most rats by 2.5 hours. This pyrogen (N = l2) or saline control (N = 8) was injected intraperitoneally and the rats killed 2.75 hours later. Rectal temperatures (Tr) were monitored continuously with thermocouples taped to the tail and recorded automatically every 3 minutes. Half of each group received an injection of radioactive precursors, (3)H-tryptophan (0.5 mCi) and (3)H-tryptophan (1.0 mCi), via an indwelling jugular catheter 60 minutes before killing, and the other half at 90 minutes. The rats were killed by near freezing in liquid nitrogen and the brains dissected in the cold. Turnover was measured by the method of Lane (Life Sci 21, 1101, 1977). At the time of killing most of the pyrogen group showed a significant (p < .02) increase (mean +/- s.e.m.) in Tr above pre injection levels (0.75 +/- 0.13 C, N = 10). The saline group showed no change (-0.025 +/- 0.16, N = 8), and the difference between groups was also significant. No significant differences were found in the levels of the amines between the pyrogen and saline groups. A significant difference was found in the specific activity of NE between the 60 minute pyrogen and saline groups (4.41 +/- 0.41 vs 2.6 +/- 0.51 dpm/pmole) but no change in turnover. This suggests an increased accumulation of (3)H-NE in the pyrogen group, but no change in utilization. An increased turnover of DA for the pyrogen group (44.5 vs 19.2 pmole/mg protein/hr) was found. However, DA is mainly a precursor in the hypothalamus and measurement was near the limit of sensitivity for the assay; these limitations Must be considered in interpreting this data. The most significant finding was an increase in the turnover of 5-HT in the pyrogen group (41.3 vs 7.3 pmole/mg protein/hr), indicating a resynthetization rate of 77% of the total pool per hour. These results suggest that at the time point measured, an increase in the utilization of 5-HT in the hypothalamus is-correlated with pyrogen fever.

Penn, P. E.↗
NASA NTRS1976

Performance characteristics of a diesel engine using low- and medium-energy gases as a fuel supplement (fumigation)

The use of low- and medium-energy gases derived from solid waste is investigated. Gases that simulate those gases that could be derived from refuse were injected into the air inlet of a 298-kilowatt (400 horsepower) diesel engine as a fuel supplement. This process is called fumigation. Three different gases with thermal-energy contents of 6.11 MJ/cu m (164 Btu/cu ft), 18.1 MJ/cu m (485 Btu/cu ft), and 18.8 MJ/cu m (505 Btu/cu ft, respectively, were used at rates ranging as high as 20 percent of the normal fuel oil energy at four different engine load points. The test results indicated approximately 100 percent gas energy utilization with no observable deleterious effect on the engine.

Monford, L. G.↗
NASA NTRS1984

Deposition of Na2SO4 from salt-seeded combustion gases of a high velocity burner rig

The mechanism of deposition of Na2SO4 was studied under controlled laboratory conditions and the results have been compared to a recently developed comprehensive theory of vapor deposition. Thus Na2SO4, NaCl, NaNO3 and simulated sea salt solutions were injected into the combustor of a nominal Mach 0.3 burner rig burning jet fuel at constant fuel/air ratios. The deposits formed on inert collectors, rotation in the cross flow of the combustion gases, were weighed and analyzed. Collector temperature was uniform and could be varied over a large range by internal air cooling. Deposition rates and dew point temperatures were determined. Supplemental testing included droplet size measurements of the atomized salt solutions. These tests along with thermodynamic and transport calculations were utilized in the interpretation of the deposition results.

Santoro, G. J.↗