Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “image sensor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Shuttle imaging radar - Research sensor for earth resources observation

The operating characteristics of the Shuttle Imaging Radar (SIR) and intended experimentation to study the effects of the incidence angle, look direction, frequency, and polarization are described. SIR will be flown in 1984-1986, operate in the L- and C-bands, and have a look angle which can be varied through 15-75 deg. Polarizations of HH on the L-band and HH, VV, HV, and VH on the C-band are possible. The SIR will provide 10 and 30 m resolutions in the high and low resolution modes, respectively, with a swatch width between 35-125 km. Real-time to ground and on-board optical recording will be available, together with digital and optical processing. The antennas will be rotated in the Shuttle bay in 5 deg increments, permitting the formation of stereo pictures during several overpasses. Viewing at 1275 MHz is intended for imaging, while the 5300 MHz band can sense soil moisture

Elachi, C.↗
NASA NTRS1994

BIOME: An Ecosystem Remote Sensor Based on Imaging Interferometry

Until recent times, optical remote sensing of ecosystem properties from space has been limited to broad band multispectral scanners such as Landsat and AVHRR. While these sensor data can be used to derive important information about ecosystem parameters, they are very limited for measuring key biogeochemical cycling parameters such as the chemical content of plant canopies. Such parameters, for example the lignin and nitrogen contents, are potentially amenable to measurements by very high spectral resolution instruments using a spectroscopic approach. Airborne sensors based on grating imaging spectrometers gave the first promise of such potential but the recent decision not to deploy the space version has left the community without many alternatives. In the past few years, advancements in high performance deep well digital sensor arrays coupled with a patented design for a two-beam interferometer has produced an entirely new design for acquiring imaging spectroscopic data at the signal to noise levels necessary for quantitatively estimating chemical composition (1000:1 at 2 microns). This design has been assembled as a laboratory instrument and the principles demonstrated for acquiring remote scenes. An airborne instrument is in production and spaceborne sensors being proposed. The instrument is extremely promising because of its low cost, lower power requirements, very low weight, simplicity (no moving parts), and high performance. For these reasons, we have called it the first instrument optimized for ecosystem studies as part of a Biological Imaging and Observation Mission to Earth (BIOME).

Peterson, David L.↗
NASA NTRS1995

Airborne Visible/Infrared Imaging Spectrometer (AVIRIS): Sensor Improvements for 1994 and 1995

AVIRIS is a NASA-sponsored Earth-remote-sensing imaging spectrometer designed, built, and operated by JPL. In the time that AVIRIS has been operational since 1989, major improvements have been completed in most of the subsystems of the sensor during the winter maintenance cycles. As a consequence of these efforts, the capabilities of AVIRIS to reliably acquire and deliver consistently high quality, calibrated imaging spectrometer data continue to improve annually, significantly over those in 1989. Improvements to AVIRIS prior to 1994 have been described elsewhere. This paper details recent and planned improvements to AVIRIS in the sensor task.

remote↗
NASA NTRS2009

Radiometric Characterization of Hyperspectral Imagers using Multispectral Sensors

The Remote Sensing Group (RSG) at the University of Arizona has a long history of using ground-based test sites for the calibration of airborne and satellite based sensors. Often, ground-truth measurements at these test sites are not always successful due to weather and funding availability. Therefore, RSG has also automated ground instrument approaches and cross-calibration methods to verify the radiometric calibration of a sensor. The goal in the cross-calibration method is to transfer the calibration of a well-known sensor to that of a different sensor, This work studies the feasibility of determining the radiometric calibration of a hyperspectral imager using multispectral a imagery. The work relies on the Moderate Resolution Imaging Spectroradiometer (M0DIS) as a reference for the hyperspectral sensor Hyperion. Test sites used for comparisons are Railroad Valley in Nevada and a portion of the Libyan Desert in North Africa. Hyperion bands are compared to MODIS by band averaging Hyperion's high spectral resolution data with the relative spectral response of M0DlS. The results compare cross-calibration scenarios that differ in image acquisition coincidence, test site used for the calibration, and reference sensor. Cross-calibration results are presented that show agreement between the use of coincident and non-coincident image pairs within 2% in most brands as well as similar agreement between results that employ the different MODIS sensors as a reference.

McCorkel, Joel↗
NASA NTRS1995

Airborne Visible/Infrared Imaging Spectrometer (AVIRIS): Sensor improvements for 1994 and 1995

AVIRIS is a NASA-sponsored Earth-remote-sensing imaging spectrometer designed, built and operated by the Jet Propulsion Laboratory (JPL). While AVIRIS has been operational since 1989, major improvements have been completed in most of the sensor subsystems during the winter maintenance cycles. As a consequence of these efforts, the capabilities of AVIRIS to reliably acquire and deliver consistently high quality, calibrated imaging spectrometer data continue to improve annually, significantly over those in 1989. Improvements to AVIRIS prior to 1994 have been described previously. This paper details recent and planned improvements to AVIRIS in the sensor task.

Sarture, C. M.↗
NASA NTRS2000

BOREAS Level-4b AVHRR-LAC Ten-Day Composite Images: At-sensor Radiance

The BOReal Ecosystem-Atmosphere Study (BOREAS) Staff Science Satellite Data Acquisition Program focused on providing the research teams with the remotely sensed satellite data products they needed to compare and spatially extend point results. Manitoba Remote Sensing Center (MRSC) and BOREAS Information System (BORIS) personnel acquired, processed, and archived data from the Advanced Very High Resolution Radiometer (AVHRR) instruments on the National Oceanic and Atmospheric Administration (NOAA-11) and -14 satellites. The AVHRR data were acquired by CCRS and were provided to BORIS for use by BOREAS researchers. These AVHRR level-4b data are gridded, 10-day composites of at-sensor radiance values produced from sets of single-day images. Temporally, the 10- day compositing periods begin 11-Apr-1994 and end 10-Sep-1994. Spatially, the data cover the entire BOREAS region. The data are stored in binary image format files.

Cihlar, Josef↗
NASA NTRS1992

Geometric fiedlity of imaging systems employing sensor arrays

A sensor assembly to be carried on an aircraft or spacecraft which will travel along an arbitrary flight path, for providing an image of terrain over which the craft travels. The assembly includes a main linear sensor array and a plurality of auxiliary sensor arrays oriented parallel to, and at respectively different distances from, the main array. By comparing the image signals produced by the main sensor array with those produced by each auxiliary array, information relating to variations in velocity of the craft carrying the assembly can be obtained. The signals from each auxiliary array will provide information relating to a respectively different frequency range.

Jones, Kenneth L.↗
NASA NTRS1990

Improving the geometric fidelity of imaging systems employing sensor arrays

A sensor assembly to be carried on an aircraft or spacecraft which will travel along an arbitrary flight path, for providing an image of terrain over which the craft travels, is disclosed. The assembly includes a main linear sensor array and a plurality of auxiliary sensor arrays oriented parallel to, and at respectively different distances from, the main array. By comparing the image signals produced by the main sensor array with those produced by each auxiliary array, information relating to variations in velocity of the craft carrying the assembly can be obtained. The signals from each auxiliary array will provide information relating to a respectively different frequency range.

Jones, Kenneth L.↗
NASA NTRS1997

Automatic registration of satellite imagery

Image registration is one of the basic image processing operations in remote sensing. With the increase in the number of images collected every day from different sensors, automated registration of multi-sensor/multi-spectral images has become an important issue. A wide range of registration techniques has been developed for many different types of applications and data. The objective of this paper is to present an automatic registration algorithm which uses a multiresolution analysis procedure based upon the wavelet transform. The procedure is completely automatic and relies on the grey level information content of the images and their local wavelet transform modulus maxima. The registration algorithm is very simple and easy to apply because it needs basically one parameter. We have obtained very encouraging results on test data sets from the TM and SPOT sensor images of forest, urban and agricultural areas.

Fonseca, Leila M. G.↗
NASA NTRS2008

Wireless Sensor Network Handles Image Data

To relay data from remote locations for NASA s Earth sciences research, Goddard Space Flight Center contributed to the development of "microservers" (wireless sensor network nodes), which are now used commercially as a quick and affordable means to capture and distribute geographical information, including rich sets of aerial and street-level imagery. NASA began this work out of a necessity for real-time recovery of remote sensor data. These microservers work much like a wireless office network, relaying information between devices. The key difference, however, is that instead of linking workstations within one office, the interconnected microservers operate miles away from one another. This attribute traces back to the technology s original use: The microservers were originally designed for seismology on remote glaciers and ice streams in Alaska, Greenland, and Antarctica-acquiring, storing, and relaying data wirelessly between ground sensors. The microservers boast three key attributes. First, a researcher in the field can establish a "managed network" of microservers and rapidly see the data streams (recovered wirelessly) on a field computer. This rapid feedback permits the researcher to reconfigure the network for different purposes over the course of a field campaign. Second, through careful power management, the microservers can dwell unsupervised in the field for up to 2 years, collecting tremendous amounts of data at a research location. The third attribute is the exciting potential to deploy a microserver network that works in synchrony with robotic explorers (e.g., providing ground truth validation for satellites, supporting rovers as they traverse the local environment). Managed networks of remote microservers that relay data unsupervised for up to 2 years can drastically reduce the costs of field instrumentation and data rec

Source record↗
NASA NTRSDate not supplied

High Latitude Considerations in the Latest GPCP monthly and daily products (V3.1)

The Global Precipitation Climatology Project (GPCP) product is a popular combined satellite-gauge precipitation data set in which the long-term standards of consistency and homogeneity is underlined. Here we discuss various high latitude analysis considered in the recently released GPCP V3.1 monthly and daily products. Satellite data are used over land and ocean and obtained from the Special Sensor Microwave Imager (SSMI), Special Sensor Microwave Imager/Sounder (SSMIS), geostationary imagers and polar orbiting infrared sounders. GPCP uses the Global Precipitation Climatology Centre (GPCC) over land, as its in situ component, but prior to combination with satellite data GPCC estimates are adjusted for gauge undercatch. Advanced sensors aboard the Tropical Rainfall Measuring Mission (TRMM), CloudSat, and Global Precipitation Measurement (GPM) mission have enabled more accurate estimation of rain and snowfall rates in recent years. Started with GPCP V3.1 these observations are integrated into GPCP through the development of the Tropical Combined Climatology (TCC) used at lower latitudes and the Merged CloudSat, TRMM, and GPM (MCTG) climatology used over the extra tropics and higher latitudes. Improved calibrations of Television-Infrared Operational Satellite (TIROS) Operational Vertical Sounder (TOVS) and Advanced Infrared Sounder (AIRS) precipitation are used outside 60ºN-S, where inside this zone the Goddard Profiling (GPROF) algorithm retrievals from SSMI/SSMIS is used to calibrate geostationary IR based precipitation estimate at monthly scale. The Gravity Recovery and Climate Experiment (GRACE) mass change observations are used to determine snowfall accumulations over frozen land and arctic basins and to assess gauge undercatch corrections. Observations of snow on sea ice from NASA’s Operation IceBridge (OIB) flights are utilized as an additional tool for snowfall assessment over sea ice. GPCP V3.1 has higher spatial resolution (0.5ox0.5o) than earlier versions (2.5ox2.5o) over both land and ocean, going back to 1983. Version 3 Daily product uses the Integrated Multi-satellitE Retrievals for Global Precipitation Measurement (GPM) mission (IMERG) Final Run V06 estimates, where available (initially restricted to 60°N-S), as well as rescaled TOVS/AIRS data in high-latitude areas, all calibrated to the GPCP V3.1 Monthly estimate. GPCP V3.1 shows about 6% increase in global oceanic precipitation and about 4.5% increase over global land and ocean compared to the previous version (V2.3), some major changes occur over the ocean and around 40oS and 60 oS. We will discuss other important changes of GPCP V3.1, compared to the earlier versions, and our future plans. Through this presentation we will also discuss that while ACCP will provide key information about precipitation, synergistic use of other Earth observing systems (e.g., mass change; recognized as a designated mission in 2017 decadal survey) can also help refine precipitation analysis, especially in high latitude and cold regions.

Ali Behrangi↗
NASA NTRS2005

Development and Application of Non-Linear Image Enhancement and Multi-Sensor Fusion Techniques for Hazy and Dark Imaging

The purpose of this research was to develop enhancement and multi-sensor fusion algorithms and techniques to make it safer for the pilot to fly in what would normally be considered Instrument Flight Rules (IFR) conditions, where pilot visibility is severely restricted due to fog, haze or other weather phenomenon. We proposed to use the non-linear Multiscale Retinex (MSR) as the basic driver for developing an integrated enhancement and fusion engine. When we started this research, the MSR was being applied primarily to grayscale imagery such as medical images, or to three-band color imagery, such as that produced in consumer photography: it was not, however, being applied to other imagery such as that produced by infrared image sources. However, we felt that it was possible by using the MSR algorithm in conjunction with multiple imaging modalities such as long-wave infrared (LWIR), short-wave infrared (SWIR), and visible spectrum (VIS), we could substantially improve over the then state-of-the-art enhancement algorithms, especially in poor visibility conditions. We proposed the following tasks: 1) Investigate the effects of applying the MSR to LWIR and SWIR images. This consisted of optimizing the algorithm in terms of surround scales, and weights for these spectral bands; 2) Fusing the LWIR and SWIR images with the VIS images using the MSR framework to determine the best possible representation of the desired features; 3) Evaluating different mixes of LWIR, SWIR and VIS bands for maximum fog and haze reduction, and low light level compensation; 4) Modifying the existing algorithms to work with video sequences. Over the course of the 3 year research period, we were able to accomplish these tasks and report on them at various internal presentations at NASA Langley Research Center, and in presentations and publications elsewhere. A description of the work performed under the tasks is provided in Section 2. The complete list of relevant publications during the research periods is provided in Section 5. This research also resulted in the generation of intellectual property.

Rahman, Zia-ur↗
NASA NTRS2012

Development of Thermal Infrared Sensor to Supplement Operational Land Imager

The thermal infrared sensor (TIRS) is a quantum well infrared photodetector (QWIP)-based instrument intended to supplement the Operational Land Imager (OLI) for the Landsat Data Continuity Mission (LDCM). The TIRS instrument is a far-infrared imager operating in the pushbroom mode with two IR channels: 10.8 and 12 m. The focal plane will contain three 640 ~512 QWIP arrays mounted onto a silicon substrate. The readout integrated circuit (ROIC) addresses each pixel on the QWIP arrays and reads out the pixel value (signal). The ROIC is controlled by the focal plane electronics (FPE) by means of clock signals and bias voltage value. The means of how the FPE is designed to control and interact with the TIRS focal plane assembly (FPA) is the basis for this work. The technology developed under the FPE is for the TIRS focal plane assembly (FPA). The FPE must interact with the FPA to command and control the FPA, extract analog signals from the FPA, and then convert the analog signals to digital format and send them via a serial link (USB) to a computer. The FPE accomplishes the described functions by converting electrical power from generic power supplies to the required bias power that is needed by the FPA. The FPE also generates digital clocking signals and shifts the typical transistor-to-transistor logic (TTL) to }5 V required by the FPA. The FPE also uses an application- specific integrated circuit (ASIC) named System Image, Digitizing, Enhancing, Controlling, And Retrieving (SIDECAR) from Teledyne Corp. to generate the clocking patterns commanded by the user. The uniqueness of the FPE for TIRS lies in that the TIRS FPA has three QWIP detector arrays, and all three detector arrays must be in synchronization while in operation. This is to avoid data skewing while observing Earth flying in space. The observing scenario may be customized by uploading new control software to the SIDECAR.

Shu, Peter↗
NASA NTRS2012

The Physics of Imaging with Remote Sensors : Photon State Space & Radiative Transfer

Standard (mono-pixel/steady-source) retrieval methodology is reaching its fundamental limit with access to multi-angle/multi-spectral photo- polarimetry. Next... Two emerging new classes of retrieval algorithm worth nurturing: multi-pixel time-domain Wave-radiometry transition regimes, and more... Cross-fertilization with bio-medical imaging. Physics-based remote sensing: - What is "photon state space?" - What is "radiative transfer?" - Is "the end" in sight? Two wide-open frontiers! center dot Examples (with variations.

clouds↗
NASA NTRS1984

Structural investigation of the Grenville Province by radar and other imaging and nonimaging sensors

The structural investigation of the Canadian Shield by orbital radar and LANDSAT, is outlined. The area includes parts of the central metasedimentary belt and the Ontario gneiss belt, and major structures as well-expressed topographically. The primary objective is to apply SIR-B data to the mapping of this key part of the Grenville orogen, specifically ductile fold structures and associated features, and igneous, metamorphic, and sedimentary rock (including glacial and recent sediments). Secondary objectives are to support the Canadian RADARSAT project by evaluating the baseline parameters of a Canadian imaging radar satellite planned for late in the decade. The baseline parameters include optimum incidence and azimuth angles. The experiment is to develop techniques for the use of multiple data sets.

Lowman, P. D., Jr.↗
NASA NTRS2003

Fuzzy image processing in sun sensor

This paper will describe how the fuzzy image processing is implemented in the instrument. Comparison of the Fuzzy image processing and a more conventional image processing algorithm is provided and shows that the Fuzzy image processing yields better accuracy then conventional image processing.

MEMS sun sensor APS attitude determination fuzzy i↗
NASA NTRS1993

Advanced data visualization and sensor fusion: Conversion of techniques from medical imaging to Earth science

Hughes Aircraft Company and the University of Chicago propose to transfer existing medical imaging registration algorithms to the area of multi-sensor data fusion. The University of Chicago's algorithms have been successfully demonstrated to provide pixel by pixel comparison capability for medical sensors with different characteristics. The research will attempt to fuse GOES (Geostationary Operational Environmental Satellite), AVHRR (Advanced Very High Resolution Radiometer), and SSM/I (Special Sensor Microwave Imager) sensor data which will benefit a wide range of researchers. The algorithms will utilize data visualization and algorithm development tools created by Hughes in its EOSDIS (Earth Observation SystemData/Information System) prototyping. This will maximize the work on the fusion algorithms since support software (e.g. input/output routines) will already exist. The research will produce a portable software library with documentation for use by other researchers.

Savage, Richard C.↗
NASA NTRS1993

Study of optical techniques for the Ames unitary wind tunnel: Digital image processing, part 6

A survey of digital image processing techniques and processing systems for aerodynamic images has been conducted. These images covered many types of flows and were generated by many types of flow diagnostics. These include laser vapor screens, infrared cameras, laser holographic interferometry, Schlieren, and luminescent paints. Some general digital image processing systems, imaging networks, optical sensors, and image computing chips were briefly reviewed. Possible digital imaging network systems for the Ames Unitary Wind Tunnel were explored.

Lee, George↗