Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “hydration”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Strength-promoting mechanism of alkanolamines on limestone-calcined clay cement and the role of sulfate

This paper reports the strength-promoting mechanism of alkanolamines on limestone-calcined clay cement (LC{sup 3}). The hydration kinetics, phase formation and microstructure of LC{sup 3} with triethanolamine (TEA) or triisopropanolamine (TIPA) were investigated. TEA enhanced the strength of LC{sup 3}, while TIPA was effective at 28 days, and a correct sulfate addition promoted their effects. Alkanolamines accelerated the aluminate reaction of LC{sup 3} during early hydration, increased sulfate slowed this reaction by producing more ettringite. TIPA favoured the hydration of ferrite in clinker, not only accelerated the silicate reaction of metakaolin, but also resulted in a rapid limestone reaction. Alkanolamines altered the morphology and chemical composition of the aluminate hydrates and C-A-S-H. Alkanolamines enabled the reduction of porosity of hardened pastes and the increased sulfate further refined them. It was the large pores being induced by TIPA at early ages that were considered to have an adverse impact on the early strength of LC{sup 3}.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Investigation of aluminum nitrate as a set retarder of magnesium potassium phosphate cement: Mechanisms involved in diluted suspension

In this study, the influence of aluminum nitrate on the hydration process of magnesium potassium phosphate (MKP) cement was investigated experimentally and through thermodynamic modelling using diluted systems with Mg/PO{sub 4} molar ratio and water-to-cement ratio of 1 and 100 respectively. Three processes contributed to retard cement hydration: the acidic nature of aluminum nitrate which reduced the initial pH of the solution by two units, the early precipitation of a taranakite-like amorphous potassium aluminophosphate, which reduced the aqueous phosphate and potassium concentrations, and a salt effect due to the presence of soluble nitrate. Precipitation of potassium-containing magnesium phosphate hydrates, like Mg{sub 2}KH(PO{sub 4}){sub 2}⋅15H{sub 2}O and K-struvite, was prohibited, whereas precipitation of newberyite and cattiite was delayed. Furthermore, the modelled phase development with ongoing cement hydration agreed rather well with the experimental findings.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Prestack Waveform Inversion at GC 955: Trials and sensitivity of PWI to high-resolution seismic data (Data Report)

Understanding the spatial extent and variability of hydrate deposits has important implications for potential economic production, climate change, and assessing natural hazards risks. Seismic reflection techniques are capable of determining the extent of gas hydrate deposits and can shed light on hydrate concentrations and properties. Using high resolution prestack time migrated seismic data collected during a 2013 US Geological Survey expedition and prestack waveform inversion (PWI) techniques, we produce highly resolved velocity models and compare them to co-located well logs. Coupling our PWI results with velocity-porosity relationships and nearby well control, we compare hydrate properties at site 955 in the Green Canyon and site 313 at Walker Ridge.

03 NATURAL GAS↗
DOE OSTI2021

Modeling of aqueous species interaction energies prior to nucleation in cement-based gel systems

Arguably the most ubiquitous construction material in modern civilization, concrete is enabling the development of megacities around the globe together with increasing living standards in developing nations. However, the exact formation mechanisms of the strength-giving calcium-rich gels remain a topic of debate. Using density functional modeling, we simulate the fundamental solution-based building blocks of cement hydrates (calcium ions and silicate and aluminate monomers) and their propensity to form pair-wise complexes with bonding environments characteristic of those found in calcium-silicate-hydrate, calcium-alumino-silicate-hydrate and sodium-containing calcium-alumino-silicate-hydrate gels, as assessed from Gibbs free energies of chemical reactions. By accurately simulating the high pH pore solution chemistry in Portland cements and related systems, along with discrete solvation of the species, we hypothesize potential early age formation routes of the gels and discuss limitations and future work associated with this approach.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Effect of supplementary cementitious materials on carbonation of cement pastes

Supplementary cementitious materials (SCM) are increasingly used in concrete for economical and environmental reasons. However, the durability of reinforced concretes against, for example, corrosion induced by carbonation varies. Here, the phase assemblage of various cement pastes with/without SCM (slag, fly ash and metakaolin), carbonated in accelerated conditions (1.5% CO{sub 2} and 65% RH) or not, has been investigated by various technics (XRD, TGA/DTA and {sup 29}Si as well as {sup 27}Al nuclear magnetic resonance spectroscopy) and compared. Results show that, after carbonation, anhydrous phases are less decalcified than hydrated phases. In cement pastes with slag, most of the calcium remains in the non-hydrated part of the slag. In contrast, the C-A,S-H phase is deeply modified and results show a coupling between C-A,S-H and hydrated aluminate phases during carbonation. In all carbonated materials, these phases tend to become an aluminosilicate gel, a very amorphous/disordered phase, containing less water than the original hydrates.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Influence of pH on chloride binding isotherms for cement paste and its components

In this paper, chloride (Cl{sup −}) binding isotherms are developed for cement hydration compounds, specifically, calcium-silicate-hydrates (CSH) and AFm phases including mono-sulfate aluminate, hydroxy-AFm, monocarbonate-AFm, and hemicarbonate-AFm, in simulated concrete pore solutions to account for the effect of pH and the presence of other ions. pH and the presence of other ions have a strong influence on the Cl{sup −} binding capacity of cement compounds, which have not been taken into consideration in previous research. A novel experimental technique is developed to characterize the binding capacity from very low (1 mM) to very high concentrations (5 M). To overcome the existing challenges of measuring both low and high Cl{sup −} concentrations without significant dilution and in the presence of SO{sub 4}{sup 2−} and OH{sup −} ions, a potentiometric method was used. The amorphous CSH in the hydrated cement paste; thus, the heterogeneity of the hydrated components of the cement paste was also quantified and accounted for in this study.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Use of microbial carbonation process to enable self‑carbonation of reactive MgO cement mixes

The low hydration and carbonation of reactive MgO cement (RMC) under ambient conditions causes prolonged setting and low compressive strengths (~4 MPa). This study proposed a unique technique which led to the enhancement of the hydration and carbonation processes via the synergistic combination of microbial carbonation process (MCP) with a hydration agent (HA) that enabled the self‑carbonation of RMC-based mixes without using of any special curing environments. Through hydrolysing urea (CO(NH{sub 2}){sub 2}) using ureolytic bacteria, CO{sub 3}{sup 2−} ions were produced to facilitate the carbonation of dissolved Mg{sup 2+} ions to form hydrated magnesium hydroxy carbonates (HMHCs). The self‑carbonation of RMC enabled by the MCP resulted in formation of brucite with a poor crystallinity and its rapid conversion into HMHCs, which improved the setting time and compressive strength of RMC-based samples. The simultaneous use of MCP with 2 M urea and HA revealed HMHCs with improved morphologies, resulting in the highest compressive strength (~15 MPa).

36 MATERIALS SCIENCE↗
DOE OSTI2023

Atomic-scale identification of defects in alite

Crystallographic defects play a crucial role in cement hydration, with initial dissolution being dominated by the formation of etch pits that rely on the intersection of defects on surfaces. However, the defects present in cement particles have remained a mystery due to the lack of detailed direct observation at the atomic scale. In this study, we used scanning transmission electron microscopy to unravel the defects in alite particles at the single-atom level. Our observations identified different types of defects, including vacancies, doping, dislocations, rough surfaces, and grain boundaries. Atomic ordering in the alite crystal was further examined based on our single-atom recognition method. Our findings indicate that defects in cement particles may serve as reactive sites during the early hydration stage, facilitating the initial dissolution and providing nucleation sites for hydration products. Finally, this work provides insights into cement defect formation at the single-atom level and offers new opportunities in tuning the hydration process through defect engineering of cement particles.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Vibrational signatures of HNO 3 acidity when complexed with microhydrated alkali metal ions, M + ∙(HNO 3 )(H 2 O) n =5 (M = Li, K, Na, Rb, Cs), at 20 K

The speciation of strong acids like HNO 3 under conditions of restricted hydration is an important factor in the rates of chemical reactions at the air-water interface. Here we explore the trade-offs in play when HNO 3 is attached to alkali ions (Li + -Cs + ) with four water molecules in their primary hydration shells. This is achieved by analyzing the vibrational spectra of the M + ∙(HNO 3 )(H 2 O) 5 clusters cooled to about 20 K in a cryogenic photofragmentation mass spectrometer. The local acidity of the acidic OH group is estimated by the extent of the red shift in its stretching frequency when attached to a single water molecule. Here, the persistence of this local structural motif (HNO 3 -H 2 O) in all of these alkali metal clusters enables us to determine the competition between the effect of the direct complexation of the acid with the cation, which acts to enhance acidity, and the role of the water network in the first hydration shell around the ions, which acts to counter (screen) the intrinsic effect of the ion. Analysis of the vibrational features associated with the acid molecule as well as those of the water network reveal how cooperative interactions in the micro hydration regime conspire to effectively offset the intrinsic enhancement of HNO 3 acidity afforded by attachment to the smaller cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

First-Principles Simulations of CuCl in High-Temperature Water Vapor

Experimental data suggest that the solubility of copper in high-temperature water vapor is controlled by the formation of hydrated clusters of the form CuCl(H 2 O) n , where the average number of water molecules in the cluster generally increases with increasing density [Migdisov, A. A.; et al. Geochim. Cosmochim. Acta2014, 129, 33–53]. However, the precise nature of these clusters is difficult to probe experimentally. Moreover, there are some discrepancies between experimental estimates of average cluster size and prior simulation work [Mei, Y. Geofluids2018, 2018, 4279124]. Here, we have performed first-principles Monte Carlo (MC) and molecular dynamics (MD) simulations to explore these clusters in finer detail. We find that molecular dynamics is not the most appropriate technique for studying aggregation in vapor phases, even at relatively high temperatures. Specifically, our MD simulations exhibit substantial problems in adequately sampling the equilibrium cluster size distribution. In contrast, MC simulations with specialized cluster moves are able to accurately sample the phase space of hydrogen-bonding vapors. At all densities, we find a stable, slightly distorted linear H 2 O–Cu–Cl structure, which is in agreement with the earlier simulations, surrounded by a variable number of water molecules. The surrounding water molecules do not form a well-defined second solvation shell but rather a loose network of hydrogen-bonded water with molecular CuCl on the outside edge of the water cluster. We also find a broad distribution of hydration numbers, especially at higher densities. In contrast to previous simulation work but in agreement with experimental data, we find that the average hydration number substantially increases with increasing density. Moreover, the value of the hydration number depends on the choice of cluster definition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Probing the proton exchange kinetics of BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3− δ ceramic electrolyte by operando diffuse reflectance infrared Fourier transform spectroscopy

Proton exchange kinetics plays an important role in governing the performance of intermediate-temperature protonic ceramic electrolysis cells (PCECs) for hydrogen production. Our understanding of the nature of the surface hydration reaction at the single-cell level, however, remains very limited, hampering further efficiency improvements. Here, in this study, we developed a custom operando diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) platform that operates under high temperature and steam conditions with applied bias. Quantitative investigations of surface H 2 O/D 2 O isotope exchange in a BaZr 0.1 Ce 0.7 Y 0.1 Yb 0.1 O 3−δ (BZCYYb1711) protonic electrolyte-based single cell were conducted under different applied voltages using this DRIFTS platform, to gain molecular-level insight into hydration kinetics. The findings show that the application of an external voltage significantly enhances the surface proton exchange rate, decreasing the apparent activation energy from 29.1 kJ mol −1 at open-circuit voltage (OCV) to 6.8 kJ mol −1 at 1.3 V. In addition, distinct voltage-induced spectral shifts in O–D vibrations point to dynamic changes in surface hydration. These findings demonstrate a sensitive spectroscopic platform for probing interfacial proton processes and reveal strong electrochemical control over surface proton kinetics, offering new opportunities for probing electrolyte hydration behavior in PCECs.

36 - MATERIALS SCIENCE↗
DOE OSTI2025

Expedition UT-GOM2-2 Summary

In the summer and fall of 2023, the University of Texas (UT) Deepwater Hydrate Coring Expedition (UT-GOM2-2) drilled, cored, made downhole measurements, and analyzed samples from the seafloor to the base of the gas hydrate stability zone at Site H, in the Walker Ridge Protracted Area Block 313 (Site H, WR313), in the Terrebonne Basin, deepwater Gulf of America (Gulf of Mexico). Analyses of data and samples from the expedition will inform biological, geochemical, and geomechanical models to constrain the role of gas hydrates in the carbon cycle and the potential for gas hydrates as an energy resource.

03 NATURAL GAS↗
DOE OSTI2024

Use of a Lignin-Based Admixture for Tailoring the Rheological Properties of Mortars for 3D Printing: Preprint

Efforts toward decarbonizing construction materials and industrial processes related to cement and concrete can be aided via multifaceted approaches that target alternative admixtures as well as precision control of fabrication. Chemical admixtures for water reduction have played a crucial role in the development of advanced concrete mixtures. Newer biomass processing techniques developed for aviation fuel production from corn stover biomass produce a more reactive lignin byproduct that is suitable for chemical modifications to mimic the properties of polycarboxylate ether admixtures with a smaller carbon footprint. The present study examines the use of lignin-based water-reducing admixture in cement pastes and mortar mixtures for 3D printing. The experimental program explores the use of different dosages of lignin-based admixture to produce 3D-printed samples with appropriate extrudability and buildability. The rheological characterization was performed to determine the flow curve of various mixtures. Finally, the heat of hydration of cement pastes was monitored via isothermal calorimetry to assess the impact of lignin-based admixtures on the hydration process of cement. The results of this study indicate that the use of biomass by-products, such as lignin-based admixtures have great potential to effectively control the fresh-state properties of cement-based materials.

bio-based admixtures↗
DOE OSTI2022

Aqueous spray-drying synthesis of alluaudite Na 2+2x Fe 2–x (SO 4 ) 3 sodium insertion material: studies of electrochemical activity, thermodynamic stability, and humidity-induced phase transition

In pursuit of high-energy density sodium insertion materials, polyanionic frameworks can be designed with tuneable high-voltage operation stemming from inductive effect. Alluaudite Na 2 Fe 2 (SO 4 ) 3 polysulfate forms one such earth-abundant compound registering the highest Fe 3+ /Fe 2+ redox potential (ca. 3.8 V vs. Na/Na + ). While this SO 4 -based system exhibits high voltage operation, it is prone to thermal decomposition and moisture attack leading to hydrated derivatives, making its synthesis cumbersome. Also, the Na–Fe–S–O quaternary system is rich with (anhydrous to hydrated) phase transitions. Herein, we demonstrate scalable aqueous-based spray drying synthesis of alluaudite Na 2+2x Fe 2–x (SO 4 ) 3 sodium insertion material involving the formation of bloedite Na 2 Fe(SO 4 ) 2 ·4H 2 O as an intermediate phase. Moreover, a reversible phase transition from alluaudite to bloedite under controlled conditions of temperature and relative humidity is reported for the first time. Thermochemistry measurements revealed the enthalpies of formation (ΔH° f ) of alluaudite and bloedite are exothermic. Hydrated bloedite (ΔH° f = –117.16 ± 1.10 kJ/mol) was found to be significantly more energetically stable than anhydrous alluaudite (ΔH° f = –11.76 ± 1.25 kJ/mol). The calorimetric data support the observed synthesis and transformation (hydration-dehydration) pathways. Spray drying route led to spherical morphology delivering capacity ~80 mAh/g. Spray drying can be extended for rapid economic synthesis of sulfate class of battery materials.

25 ENERGY STORAGE↗
DOE OSTI2020

Small molecule crystals with 1D water wires modulate electronic properties of surface water networks

This work evaluates the effect of water vapor pressure on the surface conductivity of a hydrated small molecule crystal under dry and wet conditions. The crystal contains a discrete metal complex with waters of hydration in structural positions and in 1D water wires. Under dry conditions, the surface of the hydrated crystal behaves as a near ideal capacitor. Under wet conditions, the waters of hydration serve as a template to assemble surface water networks by organization of water from the environment. The surface water provides pathways for charge transfer attributed to proton mobility that increases conductivity by > 3 orders in magnitude. Modulation between wet and dry conditions tunes the conductivity of the crystal surface via a two-step process, which has been evaluated kinetically as a function of the water vapor pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Iron speciation in blast furnace slag cements

Slag-containing pastes and concretes were analysed by element-specific synchrotron-based techniques to determine the speciation of iron on crushed materials through spatially resolved micro-spectroscopic studies. The investigated cement samples were hydrated either in the laboratory, or exposed to river or sea water. Metallic iron, along with minor proportions of iron sulphide and magnetite was detected in the laboratory sample. Iron sulphide, goethite, and siliceous hydrogarnet were discovered in the blended slag cements hydrated in contact with river water for up to 7 years. In contrast, no Fe(0) was observed in blended concretes exposed to sea water. Instead, iron sulphide, iron(II)-hydroxide and -oxide, hematite, magnetite, siliceous hydrogarnet, and goethite were detected as well as ilmenite (FeTiO{sub 3}) in the aggregates. The strong acceleration of Fe oxidation in samples exposed to sea water and the long-term passivation observed in the other samples indicate comparable processes as those occurring on steel bars.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Accelerated carbonation and structural transformation of blast furnace slag by mechanochemical alkali-activation

Alternative cements and production routes are necessary to offset the considerable global CO 2 emissions of Portland cement production. The combination of alkali-activation and mechanochemical milling in a CO 2 rich atmosphere is a promising green direction for synthesizing cementitious material as it upcycles hazardous material (slag) while capturing wt% of CO 2 during synthesis. We investigate the resulting structural transformations incurred during synthesis and hydration using a suite of characterization techniques including solid-state 27 Al, 29 Si, and 13 C NMR. The local aluminosilicate network structure of the processed clinker is best described by a melilite-type structure. Upon hydration, the network polymerizes to form a calcium, sodium aluminosilicate hydrate gel. The synthesis route also creates various metastable carbonates and bicarbonates from captured CO 2 and alkali-additives that transform into stable carbonate phases like calcite, aragonite, and gaylussite, after hydration. These findings indicate accelerated carbonation reactions occur during clinker production and demonstrates novelty as a green cement technology.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Graphene nanoplatelet for enhancement the mechanical properties and durability characteristics of alkali activated binder

The effects of the addition of graphene nanoplatelets (GNPs) on the microstructure, heat of hydration, mechanical properties and durability characteristics of alkali activated binders were investigated. A simple mixing process led to reasonably uniform dispersion of GNPs in the matrix, with minor agglomeration of GNPs detected via scanning electron microscopy. Tests on engineering properties indicated that the compressive strength of the alkali activated binder increased with the addition of GNPs at relatively low concentrations. Gains were also realized in the abrasion resistance and moisture sorptivity of the binder with GNPs addition. The heat of hydration investigations indicated that the addition of GNPs accelerates the hydration process and increases the amount of hydration products, especially at early ages. Scanning electron microscope investigations further indicated that GNPs could impede the development of microcracks and mitigate their propagation within matrix; indications of good bonding between the GNPs and the alkali activated matrix were also noted.

36 MATERIALS SCIENCE↗