Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “grain boundary diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Ultrafast Electron Trapping and Defect-Mediated Recombination in NiO Probed by Femtosecond Extreme Ultraviolet Reflection–Absorption Spectroscopy

Understanding the chemical nature of defect sites as well as the mechanism of defect-mediated recombination is critical for the rational design of energy conversion materials with improved efficiency. Using femtosecond extreme ultraviolet (XUV) spectroscopy in conjunction with X-ray photoelectron spectroscopy (XPS), we present results on the ultrafast electron dynamics in NiO prepared with varying concentrations of defect states. We find that oxygen vacancy defects do not serve as the primary recombination center, but rather the recombination rate scales linearly with the density of Ni metal defects. This suggests that grain boundaries between Ni metal and NiO are responsible for fast carrier recombination in partially reduced NiO. Here, our kinetic model shows that the photoexcited electrons self-trap via small polaron formation on the subpicosecond time scale. Additionally, we estimate an absolute measurement of small polaron formation rates, direct versus defect-mediated recombination rates, and the small polaron diffusion coefficient in NiO. This study provides important parameters for engineering NiO based materials for solar energy harvesting applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A coupled DEM-IMB-LBM model for simulating methane hydrate exploitation involving particle dissolution

The coupled discrete element and lattice Boltzmann method using an immersed moving boundary scheme was extended to simulate methane hydrate exploitation involving mass transport and particle dissolution. In this coupled DEM-IMB-LBM model, a new Dirichlet-type thermal boundary condition is extended to simulate moving curved boundaries with constant concentration. A novel periodic boundary including an efficient searching algorithm for particle contact is proposed to reduce the computational cost and boundary effect. So, this model is validated by two numerical examples: a circular particle with concentration convection-diffusion moving in a horizontal channel and mass transport from a cylinder particle in a simple shear flow. The numerical results obtained from the proposed model agree well with previous studies. To further demonstrate the capacity of the proposed model, simulations of methane hydrate exploitation including two formations in marine sediments are carried out. The numerical results indicate that the coupled DEM-IMB-LBM is not only capable of simulating the dissolution of hydrate particles at the grain level, but also recover the sand erosion and migration process in a fundamental perspective during the methane hydrate exploitation process.

42 ENGINEERING↗

Electrical Properties of Barium and Zirconium Modified NBT Ferroelectric Ceramics

Recently a new wave of interest has risen on relaxor ferroelectrics with complex perovskite structure due to their wide use in fabrication of multilayer ceramic capacitors, electrostrictive actuators, and electromechanical transducers. The polycrystalline 0.93(Bi{sub 0.5}Na{sub 0.5})Ba{sub 0.07}Z{sub 0.04}T{sub 0.96}O{sub 3}(0.07BNBZT) ceramic material, which is in the vicinity of the morphotropic phase boundary (MPB) has been prepared by using high temperature solid state reaction method. The tolerance factor has been estimated and found to be 0.815. XRD analysis revealed a rhombohedral perovskite type structure. SEM micrographs showed highly dense grains with rectangular shape. The average grain size is found to be 1.51{mu}m. Dielectric studies in the material ha indicated relaxor behaviour with diffuse phase transition. High value of {epsilon}{sub m}>1958 is found at 1kHz, Tm (phase transition temperature) 335 deg. C, The diffuseness parameter was established to be 1.60 revealing the relaxor behaviour. Further, to confirm the relaxor behaviour in the material, Vogel-Fulcher (V-F) relation has been used. Estimated V-F parameters are found to be T{sub f} = 138 deg. C, E{sub a} = 0.080 eV and {nu}{sub o} = 2.32x10{sup 8} Hz. Cole-Cole analysis has shown a non-Debye type relaxation in the system. Conductivity studies in the material obeyed the Jonscher's power law in frequency range of (45Hz-5MHz) and temperature range of (35 deg. C - 600 deg. C). The electric conduction in the system may be due to hopping/mobility/ transportation of charge carriers.

36 MATERIALS SCIENCE↗

Hot Hydrogen Testing of W-Coated UN Kernels in a Mo30W Matrix

Ceramic uranium mononitride (UN) is being considered as a reactor fuel for nuclear thermal propulsion. To avoid or reduce the dissociation of UN at the high temperatures needed, embedding it in a metallic matrix (cermet) has been proposed. To assess the viability of this concept, hot hydrogen testing of tungsten-coated UN kernels embedded in a Mo-30 wt% W (Mo30W) alloy matrix has been performed at temperatures from 1800°C to 2300°C. Both the isolated kernels and kernels consolidated by spark plasma sintering in the Mo30W matrix were tested. In addition to direct observations and mass loss measurements, the samples were analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM)/energy dispersive X-ray spectroscopy (EDS) after each run. The decomposition of UN started at 1800°C despite the coating and matrix, and increased at 2000°C. Uranium seeped through the tungsten grain boundaries of the coating at all temperatures. The consolidated sample expanded irregularly at 2000°C through the formation of voids, and SEM/EDS analysis showed uranium-containing veins in the matrix consisting of U 2 Mo according to the XRD data. The observed pore generation at 2000°C was explained by the formation of water vapor from residual oxides and diffused hydrogen. At 2200°C and above, both the kernels and the consolidated samples melted through the formation of uranium or low–melting point uranium-molybdenum alloys.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Structural development in the Santa Catharina meteorite

A metallographic study was undertaken to seek support for the idea that Santa Catharina is really massive cloudy taenite. Available metal-rich nuggets of Santa Catharina appear to have been single crystals of taenite in the few centimeter size range, separated from each other by grain boundaries occupied by troilite and schreibersite. Metallographic and electron microprobe data allow one to postulate the following cooling and structural development history: (1) single crystal taenite formed at high temperature; (2) phosphate formed within the taenite and grain boundary schreibersite formed at interfaces with troilite or with other taenite crystals; (3) schreibersite began to precipitate within taenite at about 650 C; (4) at about 450 C the meteorite entered the three phase field at which point kamacite precipitated and started growing; and (5) kamacite/schreibersite interface measurements indicate that cooling continued down to about 350 C, with large Ni diffusion gradients developing within schreibersites.

Clarke, R. S., Jr.↗

Numerical Simulations of Cathodoluminescence Measurements in Thin-Film Solar Cells

Cathodoluminescence (CL) measurements can be applied to assess grain-boundary (GB) and grain-interior (GI) recombination in thin-film solar cell materials and made quantitative if we can develop CL models that account for material and measurement complexities. Recently, we developed a three-dimensional numerical CL model, based in MATLAB, that simulates the GI CL intensity as a function of four parameters: grain size, GI lifetime, and GB and surface recombination velocities. The model assumes that GB electrostatic potentials are screened by the high excesscarrier densities used in the CL measurement such that transport is governed by ambipolar diffusion. Here, we develop models to address directly GB potentials and their effects on these measurements. First, we transfer the MATLAB-based model to COMSOL software, and then introduce shallow donors to the GBs to produce potentials. We also develop a two-dimensional model in COMSOL to simulate CL GB contrast with GB potentials. Simulations indicate that GB potentials can increase or decrease CL intensities relative to the zero-potential case. However, the high electron-beam currents typically applied in CL measurements minimize the impact of GB potentials.

14 SOLAR ENERGY↗

Electropolishing-induced topographic defects in niobium: insights and implications for superconducting radio frequency applications

Electropolishing (EP) is the premier surface preparation method for high-Q, high-gradient superconducting RF cavities made of Nb. This leaves behind an apparently smooth surface, yet the achievable peak magnetic fields fall well below the superheating field of Nb, in most cases. Here, in this work, the ultimate surface finish of EP was investigated by studying its effect on highly polished Nb samples. EP introduces high slope angle sloped-steps at grain boundaries. The magnetic field enhancement and superheating field suppression factors associated with such a geometry are calculated in the London theory. Despite the by-eye smoothness of electropolished Nb, such defects compromise the stability of the low-loss Meissner state, likely limiting the achievable peak accelerating fields in superconducting RF cavities. Finally, the impact of surface roughness on impurity diffusion is investigated which can link surface roughness to the effectiveness of heat treatments like low-temperature baking or nitrogen infusion in the vortex nucleation or hydride hypotheses. Surface roughness tends to decrease the effective dose of impurities as a result of the expansion of impurities into regions with greater internal angle. The effective dose of impurities can be protected by minimizing slope angles and step heights, ensuring uniformity.

Hryhorenko, Oleksandr [Thomas Jefferson National A↗

Electropolishing-induced topographic defects in niobium: Insights and Implications for SRF

Electropolishing (EP) is the premier surface preparation method for high-Q, high-gradient superconducting RF cavities made of Nb. This leaves behind an apparently smooth surface, yet the achievable peak magnetic fields fall well below the superheating field of Nb, in most cases. In this work, the ultimate surface finish of EP was investigated by studying its effect on highly polished Nb samples. EP introduces high slope angle sloped-steps at grain boundaries. The magnetic field enhancement and superheating field suppression factors associated with such a geometry are calculated in the London theory. Despite the by-eye smoothness of electropolished Nb, such defects compromise the stability of the low-loss Meissner state, likely limiting the achievable peak accelerating fields in superconducting RF cavities. Finally, the impact of surface roughness on impurity diffusion is investigated which can link surface roughness to the effectiveness of heat treatments like low-temperature baking or nitrogen infusion in the vortex nucleation or hydride hypotheses. Surface roughness tends to decrease the effective dose of impurities as a result of the expansion of impurities into regions with greater internal angle. The effective dose of impurities can be protected by minimizing slope angles and step heights, ensuring uniformity.

Lechner, Eric [Thomas Jefferson National Accelerat↗

Creep ductility limiting mechanisms in an additively manufactured Al-Ce-Ni-Mn-Zr alloy

Tensile creep response and cavitation damage evolution in an additively manufactured Al-7.5Ce-4.5Ni-0.4Mn-0.7Zr (wt%) alloy with peak-aging and overaging treatments were investigated in the 300–400 ºC range. Microstructural heterogeneity and its response to heat treatment and subsequent creep deformation were studied to understand the interplay between cavity formation, creep lifetime and ductility. Increasing the applied stress activated the nucleation of more cavities, an experimental observation that is well described using the vacancy accumulation model. Cavities nucleated prematurely due to localized plasticity in the denuded zones that formed at/near melt-pool or grain boundaries. Microstructure/deformation heterogeneity with consequent evolution of stress triaxiality, especially at lower stresses, causes accelerated cavitation, thus producing low creep ductility (∼ 0.2–2.4 %), compared to (∼12–21 %) ductility of the alloy measured by regular tensile tests at equivalent temperatures. A constrained diffusional cavity growth mechanism with continuous cavity nucleation during creep is established as the dominant mechanism, implying that cavitation involves vacancy diffusion, yet its growth rate is dictated by the minimum creep rate. In conclusion, the ductility-limiting creep and cavitation mechanisms discussed here provide new insight into the creep behavior of 3D-printed metallic alloys.

Additive manufacturing↗

Degradation Mechanisms of SOFC Anodes in Coal Gas Containing Phosphorus

The interaction of phosphorus in synthetic coal gas with the nickel-based anode of solid oxide fuel cells has been investigated. Tests with both anode-supported and electrolyte-supported button cells were performed at 700 to 800oC in synthetic coal gas containing 0.5 to 10 ppm phosphorus, introduced as phosphine. Two primary modes of degradation were observed. The most obvious was the formation of a series of bulk nickel phosphide phases, of which Ni3P, Ni5P2, Ni12P5 and Ni2P were identified. Phosphorus was essentially completely captured by the anode, forming a sharp boundary between converted and unconverted anode portions. These products partially coalesced into large grains, which eventually affected electronic percolation through the anode support. Thermodynamic calculations predict that formation of the first binary nickel phosphide phase is possible at sub-parts per billion concentrations in coal gas at temperatures relevant to fuel cell operation. A second mode of degradation is attributed to surface diffusion of phosphorus to the active anode/electrolyte interface to form an adsorption layer. Direct evidence for the presence of such an adsorption layer on nickel was obtained by surface spectroscopies on fracture surfaces. Further, cell performance losses were observed well before the entire anode was converted to bulk nickel phosphide. Impedance spectroscopy revealed that these losses were primarily due to growth in electrodic resistance, whereas large ohmic increases were visible when the entire anode was converted to nickel phosphide phases. The rate of resistance growth for anode-supported cells showed a very low dependence on phosphorus concentration, attributed to phosphorus activity control within the anode by bulk nickel phosphide products.

01 COAL, LIGNITE, AND PEAT↗

Mesoscale martensitic transformation in single crystals of topological defects

Liquid-crystal blue phases (BPs) are highly ordered at two levels. Molecules exhibit orientational order at nanometer length scales, while chirality leads to ordered arrays of double-twisted cylinders over micrometer scales. Past studies of polycrystalline BPs were challenged by the existence of grain boundaries between randomly oriented crystalline nanodomains. Here, the nucleation of BPs is controlled with precision by relying on chemically nanopatterned surfaces, leading to macroscopic single-crystal BP specimens where the dynamics of mesocrystal formation can be directly observed. Theory and experiments show that transitions between two BPs having a different network structure proceed through local reorganization of the crystalline array, without diffusion of the double-twisted cylinders. In solid crystals, martensitic transformations between crystal structures involve the concerted motion of a few atoms, without diffusion. The transformation between BPs, where crystal features arise in the submicron regime, is found to be martensitic in nature when one considers the collective behavior of the double-twist cylinders. Single-crystal BPs are shown to offer fertile grounds for the study of directed crystal nucleation and the controlled growth of soft matter.

36 MATERIALS SCIENCE↗

Study on the creep deformation behavior and characterization of 9Cr-1Mo-V-Nb steel at elevated temperatures

Highlights: • The true creep deformation mechanism has been found by an evaluation of threshold stresses. • The analysed creep data suggest that the rate-controlling mechanism of creep is dislocation climb. • Coarsening of the M{sub 23}C{sub 6} carbides has been observed at 650 °C and 700 °C during creep. In this study, creep tests were conducted on a set of specimens made from the same tube of T91 steel at different temperatures (600 °C, 650 °C and 700 °C) with the applied stresses ranging from 30 MPa to 180 MPa and rupture times from 28.7 to 7957 h for understanding the creep mechanism. The stress dependence of minimum creep rates exhibits a power law with different exponents were found to be 14.3, 11 and 4.6 at 600 °C, 650 °C and 700 °C, respectively. Activation energy of creep was determined to be ~573 kJ/mol, which is ~53% higher than that of the lattice self-diffusion in α-iron. Based on the stress exponents, the modified Bird-Murkherjee-Dorn (BMD) equation was used to find the threshold stresses which has shown the strongly dependent on the test temperature. After incorporating the threshold stress, true activation energy of creep was found to be decreased ~271 kJ/mol, which is equivalent to that of lattice-self diffusion in α-iron. This subsequently led to evaluation of true stress exponent ~4. The results of creep data suggest that the rate-controlling mechanism of creep is dislocation climb for T91 steel. Microstructural observation of T91 steel is mainly consisting of lath martensite structure with fine MX carbonitrides and M{sub 23}C{sub 6} carbides were characterized using the scanning and transmission electron microscopes. The stress dependence of creep rupture life has shown that the operating mechanism of creep is similar. Furthermore, creep data was analysed for validity of the Monkman-Grant relationship and creep damage tolerance parameter. The qualitative microstructure of the crept samples show that less number of MX carbonitrides within grains is responsible for creep cavity formation and decreasing the rupture life. Thus, microstructural degradation is attributed to M{sub 23}C{sub 6} carbides coarsened and dislocation sub-structure boundaries are mainly responsible for creep damage. The fracture morphology of the samples has revealed with dimples is a typical transgranular ductile failure.

36 MATERIALS SCIENCE↗

Grain Boundary Segregation Suppresses Local Short‐Range Ordering in Nanocrystalline High‐Entropy Alloys

Multi-principal-element alloys like high-entropy alloys (HEAs) have potential applications in many engineering fields due to their unique mechanical/functional properties. While HEAs are generally considered random solid solutions, recent studies revealed that they are prone to short-range-ordering (SRO) due to the complex multi-pair-wise interactions among the constituent elements. Meanwhile, SROs' evolution can sometimes be deleterious, and it is necessary to have control over their evolution. Examining the AlCoCrFe-Zr model alloy, long-range ordering occurs following the expectation of enthalpic predictions. Advanced characterization techniques—transmission electron microscopy, high-energy synchrotron X-ray diffraction/pair distribution function, and atom probe tomography, reveal that SRO is suppressed in as-milled and GB-decorated NC-(AlCoCrFe)100-xZrx (x = 0–1.5 atomic %). Warren-Cowley coefficient calculations are further used to validate the suppression of SRO. Besides the low segregation enthalpies of Cr, Fe, and Zr, and the high-mixing enthalpy of Cr and Fe, the short diffusion path to GBs due to high-GB density in the NC-HEAs and the higher energy state of the GBs than the matrix promotes GB-segregation that further alters the matrix chemistry and consequently disfavors SRO formation within the matrix. Despite the GB-segregation of Cr, Fe, and Zr, the matrices and GBs remain in a random solid solution.

36 MATERIALS SCIENCE↗

Differential multi-probe thermal transport measurements of multi-walled carbon nanotubes grown by chemical vapor deposition

Carbon nanotubes (CNTs) are quasi-one dimensional nanostructures that display both high thermal conductivity for potential thermal management applications and intriguing low-dimensional phonon transport phenomena. In comparison to the advances made in the theoretical calculation of the lattice thermal conductivity of CNTs, thermal transport measurements of CNTs have been limited by either the poor temperature sensitivity of Raman thermometry technique or the presence of contact thermal resistance errors in sensitive two-probe resistance thermometry measurements. Here we report advances in a multi-probe measurement of the intrinsic thermal conductivity of individual multi-walled CNT samples that are transferred from the growth substrate onto the measurement device. The sample-thermometer thermal interface resistance is directly measured by this multi-probe method and used to model the temperature distribution along the contacted sample segment. The detailed temperature profile helps to eliminate the contact thermal resistance error in the obtained thermal conductivity of the suspended sample segment. A differential electro-thermal bridge measurement method is established to enhance the signal-to-noise ratio and reduce the measurement uncertainty by over 40%. The obtained thermal resistances of multiple suspended segments of the same MWCNT samples increase nearly linearly with increasing length, revealing diffusive phonon transport as a result of phonon-defect scattering in these MWCNT samples. The measured thermal conductivity increases with temperature and reaches up to 390 ± 20 W m –1 K –1 at room temperature for a 9-walled MWCNT. In conclusion, theoretical analysis of the measurement results suggests submicron phonon mean free paths due to extrinsic phonon scattering by extended defects such as grain boundaries. The obtained thermal conductivity is decreased by a factor of 3 upon electron beam damage and surface contamination of the CNT sample.

42 ENGINEERING↗

New High-Performance SiC Fiber Developed for Ceramic Composites

Sylramic-iBN fiber is a new type of small-diameter (10-mm) SiC fiber that was developed at the NASA Glenn Research Center and was recently given an R&D 100 Award for 2001. It is produced by subjecting commercially available Sylramic (Dow Corning, Midland, MI) SiC fibers, fabrics, or preforms to a specially designed high-temperature treatment in a controlled nitrogen environment for a specific time. It can be used in a variety of applications, but it currently has the greatest advantage as a reinforcement for SiC/SiC ceramic composites that are targeted for long-term structural applications at temperatures higher than the capability of metallic superalloys. The commercial Sylramic SiC fiber, which is the precursor for the Sylramic-iBN fiber, is produced by Dow Corning, Midland, Michigan. It is derived from polymers at low temperatures and then pyrolyzed and sintered at high temperatures using boron-containing sintering aids (ref. 1). The sintering process results in very strong fibers (>3 GPa) that are dense, oxygen-free, and nearly stoichiometric. They also display an optimum grain size that is beneficial for high tensile strength, good creep resistance, and good thermal conductivity (ref. 2). The NASA-developed treatment allows the excess boron in the bulk to diffuse to the fiber surface where it reacts with nitrogen to form an in situ boron nitride (BN) coating on the fiber surface (thus the product name of Sylramic-iBN fiber). The removal of boron from the fiber bulk allows the retention of high tensile strength while significantly improving creep resistance and electrical conductivity, and probably thermal conductivity since the grains are slightly larger and the grain boundaries cleaner (ref. 2). Also, as shown in the graph, these improvements allow the fiber to display the best rupture strength at high temperatures in air for any available SiC fiber. In addition, for CMC applications under oxidizing conditions, the formation of an in situ BN surface layer creates a more environmentally durable fiber surface not only because a more oxidation-resistant BN is formed, but also because this layer provides a physical barrier between contacting fibers with oxidation-prone SiC surface layers (refs. 3 and 4). This year, Glenn demonstrated that the in situ BN treatment can be applied simply to Sylramic fibers located within continuous multifiber tows, within woven fabric pieces, or even assembled into complex product shapes (preforms). SiC/SiC ceramic composite panels have been fabricated from Sylramic-iBN fabric and then tested at Glenn within the Ultra-Efficient Engine Technology Program. The test conditions were selected to simulate those experienced by hot-section components in advanced gas turbine engines. The results from testing at Glenn demonstrate all the benefits expected for the Sylramic-iBN fibers. That is, the composites displayed the best thermostructural performance in comparison to composites reinforced by Sylramic fibers and by all other currently available high-performance SiC fiber types (refs. 3 and 5). For these reasons, the Ultra-Efficient Engine Technology Program has selected the Sylramic-iBN fiber for ongoing efforts aimed at SiC/SiC engine component development.

DiCarlo, James A.↗

Thermochemical Stability of Ca2Yb8(SiO4)6O2 Apatite in Presence of Molten Calcium-Magnesium-AluminoSilicate (CMAS)

Thermochemical stability of ytterbium silicon oxyapatite Ca 2 Yb 8 (SiO 4 ) 6 O 2 (CYbS) in the presence of molten calcium-magnesium aluminosilicate (CMAS) has been investigated at elevated temperatures. CYbS apatite powder was synthesized from the constituent oxides via solid state reaction method. Hot pressed apatite substrates were exposed to molten CMAS at 1200, 1300, and 1400 °C for 1, 10, and 50 h. Development of phases in the interaction region of the heat-treated specimens was monitored using scanning electron microscopy, transmission electron microscopy, high angle annular dark field imaging, selected area electron diffraction and energy dispersive X-ray spectroscopy. Monoclinic cyclosilicate Ca 3 Yb 2 (Si 3 O 9 ) 2 formed from interaction of CYbS apatite with CaO in the CMAS melt at the apatite-CMAS reaction front and continued to nucleate and grow within the residual CMAS in diffusion couples annealed for 1-50 h at 1200 °C and those heat treated at 1300 °C for 1 h. Residual CMAS was Ca-depleted when cyclosilicate was present. Dendritic wollastonite CaSiO 3 was observed within the residual CMAS in couples annealed at 1200 and 1300 °C. Ingress of molten CMAS, because of its exponential decrease in viscosity, occurred through open pores and along the grain boundaries of the apatite substrates without any detectable chemical reaction at 1300 and 1400 °C. Results of this study indicate that Ca 2 Yb 8 (SiO 4 ) 6 O 2 apatite has the potential to mitigate the CMAS corrosion up to about 1200 °C but not at higher temperatures.

X-ray diffraction↗

Understanding formation mechanisms of intermetallic compounds in dissimilar Al/steel joint processed by resistance spot welding

Here, this paper confirmed the formation mechanism of intermetallic compounds (IMCs) in Al/steel resistance spot welds with transmission electron microscopy, electron backscatter diffraction, nanoindentation and thermodynamic calculations. In particular, the formation of AlFe with BCC_B2 structure, which is not commonly seen in welds, was identified. The formation mechanism of IMCs at the high welding energy region is described as follows. Al 13 Fe 4 first nucleates from the Al side, followed by Al 5 Fe 2 growth with Fe atoms accumulating at the Al 13 Fe 4 grain boundaries. Then, Al 5 Fe 2 grains grow continuously to coarse columnar grains, and AlFe forms at the interface of Al 5 Fe 2 grains and the ferrite phase. Lastly, the needle-like Al 13 Fe 4 forms in the cooling process. At the middle welding energy region, only equiaxed Al 5 Fe 2 and small Al 13 Fe 4 grains are formed at the interface because of the lower diffusion rates of Al and Fe, hence postponing the growth of Al 5 Fe 2 and Al 13 Fe 4 . At the low welding energy region, only sporadic Al 5 Fe 2 and Al 13 Fe 4 grains are formed surrounded by the Al phase.

42 ENGINEERING↗