Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “geodetics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Quadrature errors in the partical derivatives required for the direct recovery of gravity anomalies from satellite observations

The equations of motion of a geodetic satellite in the earth's gravitational field expressed by gravity anomalies require the evaluation, amongst others, of the partial derivatives of the disturbing force with respect to individual gravity anomalies. Data are discussed on how anomaly blocks should be subdivided so that the partial derivatives may be numerically evaluated for each subdivision, and then finally meaned to give the value representative of the whole blocks, with accuracies better than 2 to 3 percent for all blocks. The number of subdivisions is large for the blocks nearest to the satellite subpoint and decreases away from it. The actual values of this spherical distance and the actual subdivision of the mean gravity anomaly blocks was determined numerically for 184 15 deg x 15 deg equal area blocks. Satellite heights above the earth of 400 km, 800 km and 1600 km were considered. The computer times for the suggested scheme were compared with alternative solutions.

Hajela, D. P.↗

Overall evaluation of ERTS imagery for cartographic application

The author has identified the following significant results. The apparently successful fitting of a plane coordinate (UTM) grid to an ERTS-1 bulk image represents a breakthrough of potential economic importance. If such results continue to be attained it means that ERTS-1 imagery even in bulk form can be reproduced as planimetric image maps that meet National Map Accuracy Standards up to the 1:250,000 scale. Such maps permit positions of image points to be geodetically defined to within 75 meters (rms). Previous efforts to map with ERTS-1 images resulted in errors approaching 300 meters (rms).

Colvocoresses, A. P.↗

Coordinate transformation by minimizing correlations between parameters

This investigation was to determine the transformation parameters (three rotations, three translations and a scale factor) between two Cartesian coordinate systems from sets of coordinates given in both systems. The objective was the determination of well separated transformation parameters with reduced correlations between each other, a problem especially relevant when the sets of coordinates are not well distributed. The above objective is achieved by preliminarily determining the three rotational parameters and the scale factor from the respective direction cosines and chord distances (these being independent of the translation parameters) between the common points, and then computing all the seven parameters from a solution in which the rotations and the scale factor are entered as weighted constraints according to their variances and covariances obtained in the preliminary solutions. Numerical tests involving two geodetic reference systems were performed to evaluate the effectiveness of this approach.

Kumar, M.↗

Position from gravity

Procedures for obtaining position from surface gravity observations are reviewed and their relevance assessed in the context of the application of modern geodetic techniques to programs of Earth and ocean physics. Solutions based on the use of surface layer techniques, the discrete value approach, and the development from Green's theorem are stated in summary, the latter being extended to order e cubed in the height anomaly. The representation of the surface gravity field which is required in order that this accuracy may be achieved is discussed. Interim techniques which could be used in the absence of such a representation are also outlined.

Mather, R. S.↗

A global station coordinate solution based upon camera and laser data - GSFC 1973

Results for the geocentric coordinates of 72 globally distributed satellite tracking stations consisting of 58 cameras and 14 lasers are presented. The observational data for this solution consists of over 65,000 optical observations and more than 350 laser passes recorded during the National Geodetic Satellite Program, the 1968 Centre National d'Etudes Spatiales/Smithsonian Astrophysical Observatory (SAO) Program, and International Satellite Geodesy Experiment Program. Dynamic methods were used. The data were analyzed with the GSFC GEM and SAO 1969 Standard Earth Gravity Models. The recent value of GM = 398600.8 cu km/sec square derived at the Jet Propulsion Laboratory (JPL) gave the best results for this combination laser/optical solution. Solutions are made with the deep space solution of JPL (LS-25 solution) including results obtained at GSFC from Mariner-9 Unified B-Band tracking. Datum transformation parameters relating North America, Europe, South America, and Australia are given, enabling the positions of some 200 other tracking stations to be placed in the geocentric system.

Marsh, J. G.↗

Identification and interpretation of tectonic features from ERTS-1 imagery

The author has identified the following significant results. Significant results from ERTS-1 imagery are: (1) Several new lineaments or faults have been identified. (2) Study of navigational maps and the ERTS-1 imagery suggests significant mapping errors in the geodetic position of Baja California.

Abdel-Gawad, M.↗

Overall evaluation of ERTS-1 imagery for cartographic application

The author has identified the following significant results. Scientific results may be summarized as follows: (1) A geodetic (UTM) grid can be fitted to MSS bulk images with a positional accuracy in the order of 50 meters (rms). (2) The MSS imagery as corrected and printed in bulk form is in effect or a defined map projection. This projection, if optimized for cartographic presentation, will have distortions in the order of only 1 part in 10,000. (3) The orbit of ERTS-1 and image delineation of MSS imagery can be held by NASA so that predesignated scenes may be identified and used as a basis for a map series. This concept could reduce the time and cost of ERTS-1 image map production many fold as compared to standard quadrangle format production.

Colvocoresses, A. P.↗

Mariner 9 control net of Mars, April 1973

A planet-wide geodetic control net of Mars that is based on the Mariner 9 television pictures has been in the process of being computed since January 1972. Results of the computations as of April 1973 are presented. Areocentric and areographic coordinates of 1340 control points have been computed using 613 frames and are presented tabularly. These coordinates will be revised as additional points and frames are added to the computation in the future.

Davis, M. E.↗

Cartographic products from the Mariner 9 mission

Simultaneous acquisition of geodetic, cartographic, geologic, and other scientific data on Mars from Mariner 9 required extensive modification of conventional methods of mapping. Preliminary evaluation of all data simultaneously generated an inordinately large number of interim cartographic products for a final cartographic atlas of Mars. The selection of the scales at which Mars would be mapped, the projections to be used, and the way the planet would be divided into quadrangles was based on the resolution of Mariner 9 pictures and upon the resources available over the lifetime of the Mariner Mars 1971 Project.

Batson, R. M.↗

Precision geodesy via radio interferometry.

Very-long-baseline interferometry experiments, involving observations of extragalactic radio sources, were performed in 1969 to determine the vector separations between antenna sites in Massachusetts and West Virginia. The 845.130-kilometer baseline was estimated from two separate experiments. The results agreed with each other to within 2 meters in all three components and with a special geodetic survey to within 2 meters in length; the differences in baseline direction as determined by the survey and by interferometry corresponded to discrepancies of about 5 meters. The experiments also yielded positions for nine extragalactic radio sources and allowed the hydrogen maser clocks at the two sites to be synchronized.

Hinteregger, H. F.↗

Mini-arc orbit determination for the Geos C altimetry experiment.

The problem is, given simultaneous observations of an altimeter-bearing geodetic satellite, from three or more high-precision radar stations, to determine its orbit to submeter accuracy in the presence of perturbations arising from strong, localized gravitational anomalies. A new solution to this problem involves the use of an f and g series specialized to the determination of radial distance (pertinent to the satellite altimeter experiment) to process data over a very short arc (e.g., 6 sec to 10 min). Such a short arc is termed a 'mini-arc.' In this approach, the data batches are connected by dynamics, rather than by the usual curve fit to a power series in time. A nonunity value of the mass factor is introduced to serve as an 'alias' for the perturbations that affect the satellite's path during the mini arc. The essence of the mini-arc approach is to include the influence of the far, or relatively lower-order, force field analytically and to solve for the remaining fine structure with accuracies that can approach a few centimeters.

Baker, R. M. L., Jr.↗

Orbit determination by range-only data.

The determination of satellite orbits for use in geodesy using range-only data has been examined. A recently developed recursive algorithm for rectification of the nominal orbit after processing each observation has been tested. It is shown that when a synchronous satellite is tracked simultaneously with a subsynchronous geodetic target satellite, the orbits of each may be readily determined by processing the range information. Random data errors and satellite perturbations are included in the examples presented.

Duong, N.↗

The ATS-F/Nimbus-E tracking experiment.

The objective of the ATS-F/Nimbus-E tracking experiment, the first of its kind, is presented. Specifically, this experiment has a twofold purpose: first, to gain experience in the practical use of satellite-to-satellite range and range rate data for very accurate orbit determination (this was its original intent); and second, to evaluate the real usefulness of such a technique for geodetic studies despite the fact that the 1000-km Nimbus orbit is not ideally suited for such a purpose. The accuracies of the tracking systems of the satellite-to-satellite and satellite-to-ground link (ATS-F to the Rosman, N.C. ground station) will be about 0.035 cm/sec in range rate and about 1 m in range - utilizing a 10 sec integration time. With these values it is possible to obtain, based upon performed error analyses, orbit height errors of the order of 0.1 to 0.3 m for the near earth orbiting Nimbus spacecraft. This experiment will therefore hopefully prove to be a significant first step for future earth applications spacecraft carrying altimeters systems for measuring ocean height variations.

Von Bun, F. O.↗

Digital processing of Mariner 9 television data.

The digital image processing performed by the Image Processing Laboratory (IPL) at JPL in support of the Mariner 9 mission is summarized. The support is divided into the general categories of image decalibration (the removal of photometric and geometric distortions from returned imagery), computer cartographic projections in support of mapping activities, and adaptive experimenter support (flexible support to provide qualitative digital enhancements and quantitative data reduction of returned imagery). Among the tasks performed were the production of maximum discriminability versions of several hundred frames to support generation of a geodetic control net for Mars, and special enhancements supporting analysis of Phobos and Deimos images.

Green, W. B.↗

Precise attitude control of the Stanford relativity satellite.

A satellite being designed by the Stanford University to measure (with extremely high precision) the effect of General Relativity is described. Specifically, the satellite will measure two relativistic precessions predicted by the theory: the geodetic effect (6.9 arcsec/yr), due solely to motion about the earth, and the motional effect (0.05 arcsec/yr), due to rotation of the earth. The gyro design requirements, including the requirement for precise attitude control and a dynamic model for attitude control synthesis, are discussed. Closed loop simulation of the satellite's natural dynamics on an analog computer is described.

Bull, J. S.↗

Mariner 9 control net of Mars, August 1972

Results are presented for a planet-wide geodetic control net of Mars which is based on Mariner 9 pictures as of August 1972. Aerocentric and aerographic coordinate of 809 control points were computed from 407 television frames. Photogrammetric parameters and methodology used in the computations are discussed. The coordinates of the features are given and figures that show the locations of the control points on the surface of Mars are included.

Davies, M. E.↗

Satellite-tracking and earth-dynamics research programs

Satellite tracking and earth dynamics research programs are discussed. Geodetic and geophysical investigations are reported along with atmospheric research using satellite drag data. Satellite tracking network functions and support groups which are discussed include: network operations, communications, data-services division, moonwatch, and programming group.

Source record↗

Photogrammetric calibration of the NASA-Wallops Island image intensifier system

An image intensifier was designed for use as one of the primary tracking systems for the barium cloud experiment at Wallops Island. Two computer programs, a definitive stellar camara calibration program and a geodetic stellar camara orientation program, were originally developed at Wallops on a GE 625 computer. A mathematical procedure for determining the image intensifier distortions is outlined, and the implementation of the model in the Wallops computer programs is described. The analytical calibration of metric cameras is also discussed.

Harp, B. F.↗