Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “emerging technologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS2011

Results from On-Orbit Testing of the Fram Memory Test Experiment on the Fastsat Micro-Satellite

NASA is planning on going beyond Low Earth orbit with manned exploration missions. The radiation environment for most Low Earth orbit missions is harsher than at the Earth's surface but much less harsh than deep space. Development of new electronics is needed to meet the requirements of high performance, radiation tolerance, and reliability. The need for both Volatile and Non-volatile memory has been identified. Emerging Non-volatile memory technologies (FRAM, C-RAM,M-RAM, R-RAM, Radiation Tolerant FLASH, SONOS, etc.) need to be investigated for use in Space missions. An opportunity arose to fly a small memory experiment on a high inclination satellite (FASTSAT). An off-the-shelf 512K Ramtron FRAM was chosen to be tested in the experiment.

MacLeod, Todd C.↗
NASA NTRS2011

For Spacious Skies: Self-Separation with "Autonomous Flight Rules" in US Domestic Airspace

Autonomous Flight Rules (AFR) are proposed as a new set of operating regulations in which aircraft navigate on tracks of their choice while self-separating from traffic and weather. AFR would exist alongside Instrument and Visual Flight Rules (IFR and VFR) as one of three available flight options for any appropriately trained and qualified operator with the necessary certified equipment. Historically, ground-based separation services evolved by necessity as aircraft began operating in the clouds and were unable to see each other. Today, technologies for global precision navigation, emerging airborne surveillance, and onboard computing enable traffic conflict management to be fully integrated with navigation procedures onboard the aircraft. By self-separating, aircraft can operate with more flexibility and fewer flight restrictions than are required when using ground-based separation. The AFR concept proposes a practical means in which self-separating aircraft could share the same airspace as IFR and VFR aircraft without disrupting the ongoing processes of Air Traffic Control. The paper discusses the context and motivation for implementing self-separation in US domestic airspace. It presents a historical perspective on separation, the proposed way forward in AFR, the rationale behind mixed operations, and the expected benefits of AFR for the airspace user community.

Wing, David J.↗
NASA NTRS2012

Technologies Render Views of Earth for Virtual Navigation

On a December night in 1995, 159 passengers and crewmembers died when American Airlines Flight 965 flew into the side of a mountain while in route to Cali, Colombia. A key factor in the tragedy: The pilots had lost situational awareness in the dark, unfamiliar terrain. They had no idea the plane was approaching a mountain until the ground proximity warning system sounded an alarm only seconds before impact. The accident was of the kind most common at the time CFIT, or controlled flight into terrain says Trey Arthur, research aerospace engineer in the Crew Systems and Aviation Operations Branch at NASA s Langley Research Center. In situations such as bad weather, fog, or nighttime flights, pilots would rely on airspeed, altitude, and other readings to get an accurate sense of location. Miscalculations and rapidly changing conditions could contribute to a fully functioning, in-control airplane flying into the ground. To improve aviation safety by enhancing pilots situational awareness even in poor visibility, NASA began exploring the possibilities of synthetic vision creating a graphical display of the outside terrain on a screen inside the cockpit. How do you display a mountain in the cockpit? You have to have a graphics-powered computer, a terrain database you can render, and an accurate navigation solution, says Arthur. In the mid-1990s, developing GPS technology offered a means for determining an aircraft s position in space with high accuracy, Arthur explains. As the necessary technologies to enable synthetic vision emerged, NASA turned to an industry partner to develop the terrain graphical engine and database for creating the virtual rendering of the outside environment.

Source record↗
NASA NTRS2012

2011 NASA Range Safety Annual Report

Welcome to the 2011 edition of the NASA Range Safety Annual Report. Funded by NASA Headquarters, this report provides a NASA Range Safety overview for current and potential range users. As is typical with odd year editions, this is an abbreviated Range Safety Annual Report providing updates and links to full articles from the previous year's report. It also provides more complete articles covering new subject areas, summaries of various NASA Range Safety Program activities conducted during the past year, and information on several projects that may have a profound impact on the way business will be done in the future. Specific topics discussed and updated in the 2011 NASA Range Safety Annual Report include a program overview and 2011 highlights; Range Safety Training; Range Safety Policy revision; Independent Assessments; Support to Program Operations at all ranges conducting NASA launch/flight operations; a continuing overview of emerging range safety-related technologies; and status reports from all of the NASA Centers that have Range Safety responsibilities. Every effort has been made to include the most current information available. We recommend this report be used only for guidance and that the validity and accuracy of all articles be verified for updates. Once again the web-based format was used to present the annual report. We continually receive positive feedback on the web-based edition and hope you enjoy this year's product as well. As is the case each year, contributors to this report are too numerous to mention, but we thank individuals from the NASA Centers, the Department of Defense, and civilian organizations for their contributions. In conclusion, it has been a busy and productive year. I'd like to extend a personal Thank You to everyone who contributed to make this year a successful one, and I look forward to working with all of you in the upcoming year.

Dumont, Alan G.↗
NASA NTRS2012

Stiffness and Damping Coefficient Estimation of Compliant Surface Gas Bearings for Oil-Free Turbomachinery

Foil gas bearings are a key technology in many commercial and emerging oilfree turbomachinery systems. These bearings are nonlinear and have been difficult to analytically model in terms of performance characteristics such as load capacity, power loss, stiffness, and damping. Previous investigations led to an empirically derived method to estimate load capacity. This method has been a valuable tool in system development. The current work extends this tool concept to include rules for stiffness and damping coefficient estimation. It is expected that these rules will further accelerate the development and deployment of advanced oil-free machines operating on foil gas bearings.

Della-Corte, Christopher↗
NASA NTRS2012

2012 NASA Range Safety Annual Report

This report provides a NASA Range Safety (NRS) overview for current and potential range users. This report contains articles which cover a variety of subject areas, summaries of various NASA Range Safety Program (RSP) activities performed during the past year, links to past reports, and information on several projects that may have a profound impact on the way business will be conducted in the future. Specific topics discussed in the 2012 NASA Range Safety Annual Report include a program overview and 2012 highlights; Range Safety Training; Independent Assessments; Support to Program Operations at all ranges conducting NASA launch/flight operations; a continuing overview of emerging range safety-related technologies; and status reports from all of the NASA Centers that have Range Safety responsibilities.

Dumont, Alan G.↗
NASA NTRS2013

2013 NASA Range Safety Annual Report

Welcome to the 2013 edition of the NASA Range Safety Annual Report. Funded by NASA Headquarters, this report provides an Agency overview for current and potential range users. This report contains articles which cover a variety of subject areas, summaries of various activities performed during the past year, links to past reports, and information on several projects that may have a profound impact on the way business will be conducted in the future. Specific topics discussed in the 2013 NASA Range Safety Annual Report include a program overview and 2013 highlights, Range Safety Training, Independent Assessments, support to Program Operations at all ranges conducting NASA launch/flight operations, a continuing overview of emerging range safety-related technologies, and status reports from all of the NASA Centers that have Range Safety responsibilities. Every effort has been made to include the most current information available. We recommend this report be used only for guidance and that the validity and accuracy of all articles be verified for updates. As is the case each year, we had a wide variety of contributors to this report from across our NASA Centers and the national range safety community at large, and I wish to thank them all. On a sad note, we lost one of our close colleagues, Dr. Jim Simpson, due to his sudden passing in December. His work advancing the envelope of autonomous flight safety systems software/hardware development leaves a lasting impression on our community. Such systems are being flight tested today and may one day be considered routine in the range safety business. The NASA family has lost a pioneer in our field, and he will surely be missed. In conclusion, it has been a very busy and productive year, and I look forward to working with all of you in NASA Centers/Programs/Projects and with the national Range Safety community in making Flight/Space activities as safe as they can be in the upcoming year.

Center Status↗
NASA NTRS2015

A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing

In a NASA Aeronautics Research Institute (NARI) sponsored program entitled "A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing," evaluation of emerging materials and additive manufacturing technologies was carried out. These technologies may enable fully non-metallic gas turbine engines in the future. This paper highlights the results of engine system trade studies which were carried out to estimate reduction in engine emissions and fuel burn enabled due to advanced materials and manufacturing processes. A number of key engine components were identified in which advanced materials and additive manufacturing processes would provide the most significant benefits to engine operation. In addition, feasibility of using additive manufacturing technologies to fabricate gas turbine engine components from polymer and ceramic matrix composite were demonstrated. A wide variety of prototype components (inlet guide vanes (IGV), acoustic liners, engine access door, were additively manufactured using high temperature polymer materials. Ceramic matrix composite components included first stage nozzle segments and high pressure turbine nozzle segments for a cooled doublet vane. In addition, IGVs and acoustic liners were tested in simulated engine conditions in test rigs. The test results are reported and discussed in detail.

Ceramic Matrix Composites↗
NASA NTRS2015

A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing

In a NASA Aeronautics Research Institute (NARI) sponsored program entitled "A Fully Non-Metallic Gas Turbine Engine Enabled by Additive Manufacturing", evaluation of emerging materials and additive manufacturing technologies was carried out. These technologies may enable fully non-metallic gas turbine engines in the future. This paper highlights the results of engine system trade studies which were carried out to estimate reduction in engine emissions and fuel burn enabled due to advanced materials and manufacturing processes. A number of key engine components were identified in which advanced materials and additive manufacturing processes would provide the most significant benefits to engine operation. In addition, feasibility of using additive manufacturing technologies to fabricate gas turbine engine components from polymer and ceramic matrix composite were demonstrated. A wide variety of prototype components (inlet guide vanes (IGV), acoustic liners, engine access door) were additively manufactured using high temperature polymer materials. Ceramic matrix composite components included first stage nozzle segments and high pressure turbine nozzle segments for a cooled doublet vane. In addition, IGVs and acoustic liners were tested in simulated engine conditions in test rigs. The test results are reported and discussed in detail.

Additive Manufacturing↗
NASA NTRS2016

Growth Mechanism of Nanowires: Ternary Chalcogenides

In the past two decades there has been a large rise in the investment and expectations for nanotechnology use. Almost every area of research has projected improvements in sensors, or even a promise for the emergence of some novel device technologies. For these applications major focuses of research are in the areas of nanoparticles and graphene. Although there are some near term applications with nanowires in photodetectors and other low light detectors, there are few papers on the growth mechanism and fabrication of nanowire-based devices. Semiconductor nanowires exhibit very favorable and promising optical properties, including high transparency and a several order of magnitude better photocurrent than thin film and bulk materials. We present here an overview of the mechanism of nanowire growth from the melt, and some preliminary results for the thallium arsenic selenide material system. Thallium arsenic selenide (TAS) is a multifunctional material combining excellent acousto-optical, nonlinear and radiation detection properties. We observed that small units of (TAS) nanocubes arrange and rearrange at moderate melt undercooling to form the building block of a nanowire. In some cases very long wires (less than mm) are formed. Since we avoided the catalyst, we observed self-nucleation and uncontrolled growth of wires from different places.

Singh, N. B.↗
NASA NTRS2018

Role of a Chemist in Modern Industries: Design and Development of Nanoengineered Multifunctional Materials

During the past fifteen years significant investment has been made for the applications of nanotechnology in almost every aspect of life. Almost every area of research has projected improvements including biotechnology, bioinspired electronic, optical and radiological sensors, or a promise for the emergence of some novel device technologies. For such applications major focus has been placed on research nanoparticles, nanotubes nanorods and two-dimensional structures similar to that of graphene. Some near- term applications of nano- particles and nanowires have produced very promising results for better synthesis of energy storage materials, design of biologically active composites like apatites, laser host crystals, photodetectors and sensor materials for radiation detection. To achieve desired morphologies, nanomaterials can be utilized some organic melt and orient the grains by the directional solidification method. The organic treated materials produce different characteristics than coarsened oxide materials. The focus is also understanding the morphology and performance function in human organs that occur because of aging or disease, and responses to interventions. We annealed to determine the changes in morphologies and hence effect of aging. In this presentation, we will discuss correlation between the designed composition, micromorphology and the performance parameters of nanomaterials. To understand the mechanism of formation of nanoparticles, nanoboloids, fibers experimental details and observations on the of multinary compounds will be presented. These observations on the transition of nanomorphology can highlight the mechanism of the phase transition in some oxides and selenides.

Singh, N. B.↗
NASA NTRS2019

Bounding Methods for Heterogeneous Lidar-derived Navigational Geofences

Safe Unmanned Aerial Vehicle (UAV) operations near the ground require navigation methods that avoid fixed obstacles such as buildings, power lines and trees. Aerial lidar surveys of ground structures are available with the precision and accuracy to geolocate obstacles, but the high volume of raw survey data can exceed the compute power of onboard processors and the rendering ability of ground-based flight planning maps. Representing ground structures with bounding polyhedra instead of point clouds greatly reduces the data size and can enable effective obstacle avoidance, as long as the bounding geometry envelopes the structures with high spatial fidelity. This report describes in detail four methods to compute bounding geometries of ground obstacles from lidar point clouds. The four methods are: 1) 2.5D Maximum Elevation Box, 2) 2.5D Ground Map Extrusion, 3) 3D Bounding Cylinder, and 4) 3D Bounding Box. The methods are applied to five point cloud datasets from lidar surveys of UAV flight research sites in Georgia and Virginia with an average point spacing that ranges from 0.1m to 0.6m. The methods are assessed using survey areas with geometrically heterogeneous ground structures: buildings, vegetation, power lines, and sub-meter structures such as road signs and guy wires. The 2.5D Maximum Elevation Box method is useful for simple structures. The 2.5D Ground Map Extrusion method efficiently encloses vegetation, but requires handdrawn ground footprints. The 3D Bounding Cylinder method excels at enclosing linear structures such as power lines and fences. The 3D Bounding Box method excels at enclosing planar structures such as buildings. The methods are compared on the basis of data compression and boundary fidelity on selected areas. The 2.5D methods yield the highest data compression but the polyhedra produced by them enclose significant amounts of empty space. Boundary fidelity is superior for the 3D methods, though this fidelity comes at the cost of a roughly thirtyfold lower data compression ratio than the 2.5D Maximum Elevation Box method. A mix of these output geometries is proposed for autonomous UAV navigation with limited on-board computing. Both the accuracy and spatial detail of emerging satellite-based survey technology lower than that of aerial lidar scanning survey technology. Sub-meter structures and thin linear structures are not reliably mapped at present by satellite-based surveys.

Moore, Andrew J.↗
NASA NTRSDate not supplied

Massless Exploration – Humans as a Solar System Species

A vision for exploration of the solar system in an earth independent manner is presented taking into account key drivers, challenges and future technological advances. This work was in response to requirements set by the NASA Advanced Exploration Systems (AES) Office. Planetary targets, key assumptions and approaches to utilizing non-terrestrial resources are presented. The mission was divided into four sprints. The first sprint aims at a settlement on Earth’s moon. The second sprint aims at establishing a Lagrangian point station near the moon. The third sprint leads to the colonization of Mars and its moons. The fourth and final sprint investigated the exploration of Callisto, a moon of Jupiter. Bio-inspired approaches to technology and processes were considered to ensure that the in-space habitats are Earth like. The conclusion based on exploring the four sprints is that it is feasible to colonize the solar system without relying on earth but this relies on critical technology development and investments in emerging areas.

In-situ resource utilization↗
NASA NTRSDate not supplied

Massless Exploration: Humans as a Solar System Species

A vision for exploration of the solar system in an earth independent manner is presented taking into account key drivers, challenges and future technological advances. This work was in response to requirements set by the NASA Advanced Exploration Systems (AES) Office. Planetary targets, key assumptions and approaches to utilizing non-terrestrial resources are presented. The mission was divided into four sprints. The first sprint aims at a settlement on Earth’s moon. The second sprint aims at establishing a Lagrangian point station near the moon. The third sprint leads to the colonization of Mars and its moons. The fourth and final sprint investigated the exploration of Callisto, a moon of Jupiter.. Bio-inspired approaches to technology and processes were considered to ensure that the in-space habitats are Earth like. The conclusion based on exploring the four sprints is that it is feasible to colonize the solar system without relying on earth but this relies on critical technology development and investments in emerging areas.

In-situ resource utilization↗
NASA NTRSDate not supplied

Initial Regulatory and Certification Approach for the SUSAN Electrofan Concept

New aircraft concepts and associated technologies are required to meet emerging environ-mental impact goals, while still meeting established airworthiness certification standards and regulations. The SUbsonic Single Aft eNgine (SUSAN) Electrofan is one of these concepts, utilizing a single aft-mounted engine, electrified aircraft propulsion, and an emergency backup battery. This paper explores the current certification and regulatory barriers to this novel aircraft design and the potential methods for adapting certification and regulatory requirements for the SUSAN Electrofan concept. Although some certification requirements, such as the Extended Operations regulations for continued operation after the loss of an engine, can be met with only minor changes, other requirements require modifications to the regulations or the aircraft concept for compliance. Early insight to the certification approach for the SUSAN concept, while the design is still undergoing trade space exploration, allows the development of the aircraft alongside any modifications to certification standards.

SUSAN Electrofan↗
NASA NTRSDate not supplied

Large-scale Additive Manufacturing for Exploration

Additive Manufacturing (AM) is emerging as a mainstream manufacturing technology, and demand for large part manufacturing is getting stronger. Direct Metal Deposition (DMD) is a DED technology based on laser and powder metal application using a closed-loop-feedback control system. This webinar focuses on additive manufacturing of NASA’s RS-25 engine nozzle liner using DMD technology. This liner (10ft in height and 8ft in diameter) is beyond the print capability of existing 3D printing processes. To print this part, significant advancements were made to the DMD technology by deploying two process heads in the machine and expanding the machine work envelop to allow manufacturing of such large parts in a safe and efficient environment. A successful demonstration of the AM of the RS25 engine nozzle liner marks a new era in 3D printing and elevates the current 3D printing technology to a new level for affordable manufacturing of large metal parts.

Additive Manufacturing↗
NASA NTRSDate not supplied

A High-Performance Computing GNSS-aware Path Planning Algorithm for Safe Urban Flight Operations

The emergence and development of advanced technologies and vehicle types have created a growing demand for new forms of flight operations. These new and increasingly complex operational paradigms, such as Advanced and Urban Air Mobility (AAM/UAM), present regulatory authorities and the aviation community with several design-and-implementation challenges – particularly for highly autonomous vehicles. An overarching and daunting task is to develop protocols that can integrate these operations without compromising safety or disrupting traditional airspace operations. A shift toward a more predictive, autonomous, risk mitigation capability becomes critical to meet this challenge. This paper proposes and evaluates a computationally-efficient path planning approach to perform pre-flight planning and autonomous in-flight re-routing to minimize exposures to selected hazards. In our evaluation, hazards associated with degraded and missing critical GPS navigation data are considered. In this paper, we first present a high-performance computing path planning approach based on an adapted Bellman-Ford algorithm, developed in the CUDA programming language. Using the adapted path planning algorithm, we test this algorithm when encountering issues with GPS quality, and deliver an implementation that can produce flight paths that minimize exposure to risks, while maintaining a low computational burden. In our evaluation, the computation of periodic and aperiodic path updates are evaluated, prioritizing specific events as triggers for updates, based on changes to satellite availability. These critical events can lead to significant exposure to navigational hazards if not dealt with correctly.

GNSS↗
NASA NTRSDate not supplied

A High-Performance Computing GNSS-aware Path Planning Algorithm for Safe Urban Flight Operations

The emergence and development of advanced technologies and vehicle types have created a growing demand for new forms of flight operations. These new and increasingly complex operational paradigms, such as Advanced and Urban Air Mobility (AAM/UAM), present regulatory authorities and the aviation community with several design-and-implementation challenges – particularly for highly autonomous vehicles. An overarching and daunting task is to develop protocols that can integrate these operations without compromising safety or disrupting traditional airspace operations. A shift toward a more predictive, autonomous, risk mitigation capability becomes critical to meet this challenge. This paper proposes and evaluates a computationally-efficient path planning approach to perform pre-flight planning and autonomous in-flight re-routing to minimize exposures to selected hazards. In our evaluation, hazards associated with degraded and missing critical GPS navigation data are considered. In this paper, we first present a high-performance computing path planning approach based on an adapted Bellman-Ford algorithm, developed in the CUDA programming language. Using the adapted path planning algorithm, we test this algorithm when encountering issues with GPS quality, and deliver an implementation that can produce flight paths that minimize exposure to risks, while maintaining a low computational burden. In our evaluation, the computation of periodic and aperiodic path updates are evaluated, prioritizing specific events as triggers for updates, based on changes to satellite availability. These critical events can lead to significant exposure to navigational hazards if not dealt with correctly.

GNSS↗