Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “elastic model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Elevated temperature contact creep and friction of nickel-based superalloys using machine learning assisted finite element analysis

Nickel-based superalloys with superior thermochemical, mechanical, and tribological properties are highly utilized for critical components in several high temperature applications such as gas turbines and nuclear reactors. Inconel 617, in particular, is considered as one of the main candidate superalloys for tribo-components in very-high-temperature gas-cooled nuclear reactors. Recent findings indicate that this alloy grows unique surface oxide especially in a high-temperature helium environment with distinctive wear, friction, and contact properties. Here, this study investigates the high temperature contact area evolution and frictional behavior of Inconel 617 using finite element simulation and provides predictive models for the contact and friction performance at different normal loads, dwell times, and temperatures. High temperature helium-aged Inconel 617 top surface properties (up to 600 °C) are utilized along with a single asperity-based deformable elastic-plastic contact model under combined normal and tangential loading. Machine learning is used to assist the finite element results and to predict friction coefficient as well as contact area evolution. While a small difference is observed in the instantaneous friction coefficient (no dwell time) for all temperatures, friction coefficient increases considerably with dwell time. This shows that the effect of contact creep for longer dwell times significantly dominants the effect of high temperature variation in basic mechanical parameters such as modulus and yield strength. It is found that increasing temperature and dwell times lead to the friction coefficient increase, yet the dominance of dwell time effects decreases at higher temperatures and loads. While the analysis is presented for Inconel 617, the methodology is easy to be generalized and can be applied to other HT alloys.

36 MATERIALS SCIENCE↗

Sensitivity Analysis of Material Model Parameters to Reproduce Crushing of Composite Tubes

The ability to predict the behavior of composite structures under impact conditions is an important challenge for engineering analysis since it requires modeling beyond the elasticity and into failure initiation and propagation. Crushing of laminate composites is the result of a combination of several and complex failure mechanisms, which are not always possible to reproduce together in a single finite element analysis (FEA). In this paper, models based on lamina-level failure criteria have been used to predict the onset of damage; once failure initiates, the mechanisms of failure propagation require reducing the material properties using several degradation schemes. Among the composite material models available in LS-DYNA, MAT-ENHANCED-COMPOSITE-DAMAGE (MAT-54) has been chosen for modeling the axial crushing of composite tubes with various resistant sections and wall slope, given the reduced experimental input parameters to insert into the card definition. Comparison with experimental data shows that such material model is able to successfully reproduce the crushing behavior, even if the numerical results are strictly correlated with some model parameters which cannot be measured experimentally or are purely mathematical expedients. Therefore, extensive calibration of these parameters by trial-and-error is necessary to achieve successful simulation results. Once done it for a structure made of the same composite material, it is possible to adopt the same card configuration for all the other cases, obtaining good agreement between numerical and experimental results. After, the attempt to model the same geometries using the MAT-LAMINATED-COMPOSITE-FABRIC (MAT-58) card with the same parameter values previously calibrated has been done obtaining results comparable with the experimental data.

36 MATERIALS SCIENCE↗

Interplaying mechanisms behind single inclusive jet suppression in heavy-ion collisions

The suppression factor for single inclusive jets in Pb + Pb collisions at the Large Hadron Collider (LHC) has a weak dependence on the transverse momentum $p_T$ and remains almost the same at two colliding energies, $\sqrt{s}$ = 2.76 and 5.02 TeV, though the central rapidity density of bulk hadrons increases by about 20%. Here, this phenomenon is investigated within the linear Boltzmann transport (LBT) model, which includes elastic and inelastic processes based on perturbative QCD for both jet shower and recoil medium partons as they propagate through a quark-gluon plasma (QGP). With the dynamic evolution of the QGP given by the 3 + 1 D CLVisc hydrodynamic model with event-by-event fully fluctuating initial conditions, single inclusive jet suppression in Pb + Pb collisions from LBT agrees well with experimental data. The weak $ \sqrt{s} $ and $p_T$ dependence of the jet suppression factor at LHC are found to result directly from the $ \sqrt{s} $ dependence of the initial jet $p_T$ spectra and slow $p_T$ dependence of the jet energy loss. Contributions from jet-induced medium response, influence of radial expansion, both of which depend on jet-cone size, and jet flavor composition all conjoin to give a slow $p_T$ dependence of jet energy loss and the single jet suppression factor R AA , their dependence on $\sqrt{s}$ , and jet-cone size. Single inclusive jet suppression at $\sqrt{s}$ = 200 GeV is also predicted that actually decreases slightly with p T in the $p_T$< 50 GeV/c range because of the steeper initial jet spectra though the $p_T$ dependence of the jet energy loss is weaker than that at LHC.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Dynamic response of some tentative compliant wall structures to convected turbulence fields

Some tentative compliant wall structures designed for possible skin friction drag reduction are investigated. Among the structural models considered is a ribbed membrane backed by polyurethane or PVS plastisol. This model is simplified as a beam placed on a viscoelastic foundation as well as on a set of evenly spaced supports. The total length of the beam may be either finite or infinite, and the supports may be either rigid or elastic. Another structural model considered is a membrane mounted over a series of pretensioned wires, also evenly spaced, and the entire membrane is backed by an air cavity. The forcing pressure field is idealized as a frozen random pattern convected downstream at a characteristic velocity. The results are given in terms of the frequency response functions of the system, the spectral density of the structural motion, and the spectral density of the boundary layer pressure including the effect of structural motion. These results are used in a parametric study of structural configurations capable of generating favorable wave lengths, wave amplitudes, and wave speeds in the structural motion for potential drag reduction.

Nijim, H. H.↗

Short-wavelength buckling and shear failures for compression-loaded composite laminates

The short-wavelength buckling (or the microbuckling) and the interlaminar and inplane shear failures of multi-directional composite laminates loaded in uniaxial compression are investigated. A laminate model is presented that idealizes each lamina. The fibers in the lamina are modeled as a plate, and the matrix in the lamina is modeled as an elastic foundation. The out-of-plane w displacement for each plate is expressed as a trigonometric series in the half-wavelength of the mode shape for laminate short-wavelength buckling. Nonlinear strain-displacement relations are used. The model is applied to symmetric laminates having linear material behavior. The laminates are loaded in uniform end shortening and are simply supported. A linear analysis is used to determine the laminate stress, strain, and mode shape when short-wavelength buckling occurs. The equations for the laminate compressive stress at short-wavelength buckling are dominated by matrix contributions.

Shuart, M. J.↗

Application of the operator spline technique to nonlinear estimation and control of moving elastic systems

A bilinear model of the vibrational dynamics of a deformable maneuvering body is described. Estimates of the deformation state are generated through a low dimensional operator spline interpolator of bilinear systems combined with a feedback linearized based observer. Upper bounds on error estimates are also generated through the operator spline, and potential application to shaping control purposes is highlighted.

Karray, Fakhreddine↗

Theoretical Study of Mechanical Stability and Physical Properties of Co{sub 2}V{sub 1−x}Zr{sub x}Ga

The mechanical stability and physical properties of Co{sub 2}V{sub 1−x}Zr{sub x}Ga (x = 0, 0.25, 0.50, 0.75, 1) have been predicted by using ab initio calculations based on density functional theory. The exchange-correlation potentials are treated within the generalized gradient approximation-Perdew-Burke and Ernzerhhof (GGA-PBE) and Hubbard coefficient (GGA+U). The investigated minimum lattice parameter of Co{sub 2}VGa is 5.8030 Å, which is in excellent agreement with available experimental and theoretical data and for Co{sub 2}V{sub 1−x}Zr{sub x}Ga (x = 0.25, 0.50, 0.75, 1) are 5.9026, 5.9625, 6.0060 and 6.0021 Å, respectively, which are predicted for the very first time. The total magnetic moments decrease with increasing concentration of x in Co{sub 2}V{sub 1−x}Zr{sub x}Ga, in agreement with the Slater-Pauling rule. Band structure and density of states calculations show that the minority spin channel exhibits band gaps of 0.43, 0.46, 0.52, 0.54 and 1.01 eV for GGA+U scheme around the Fermi level confirming that all the studied composites are half-metallic in nature. In this study, we also studied the elastic constant and it is established that all the materials are mechanically stable and ductile in nature. The Co{sub 2}VGa is stiffer than other materials and all the studied composites have anisotropic behaviour. Moreover, by using a quasi-harmonic Debye model and calculated elastic constant, the Debye temperature and temperature-dependent constant volume heat capacity have been investigated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Helicity conservation hypothesis and pp-elastic scattering

We propose the helicity conservation model for description of polarization effects in the pp -elastic scattering at asymptotic energies. In this model the complete set of experiments will consist of only three observables. The predictions of model are compared with experimental data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

η{sup 7}Li Scattering in the αt-Cluster Model

The cross sections for elastic and inelastic η-meson scattering on {sup 7}Li nuclei are obtained on the basis of the αt-cluster representation of the target nucleus. The experimentally known values of the parameters of elastic ηα and αt scattering are used in exactly solving three-body Faddeev equations with separable two-body potentials. The η{sup 7}Li elastic-scattering scattering length found from respective calculations is a{sub η7}Li = −0.310 − i0.198 fm.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

An exactly solvable model for calculating critical misfit and thickness in epitaxial superlattices - Layers of equal elastic constants and thicknesses

A parabolic interaction potential has been used to develop a model for calculating the misfit dislocation (MD) energy in the case of a superlattice of alternating layers of materials with equal elastic constants and thicknesses. The model, which is believed to be a good one for small misfits and to have some merit for covalent bonded materials, is exactly solvable for the critical thickness above which it is energetically favorable to lose coherency by the introduction of MDs into the interfaces. It was found, for a given misfit f, that the critical thickness for epitaxial superlattices free from their substrate is somewhat more than four times that for a single epilayer on a thick substrate. Furthermore, the critical thickness varies almost inversely with misfit to the power 1.22 when Poisson's ratio is 1/3. It was also shown that the critical misfit f(c) obtained by equating maximal misfit strain and MD energies is a significant overestimate of f(c). The results for a superlattice are compared with those of a thin layer on a thick substrate.

Van Der Merwe, Jan H.↗

Elastic lithosphere thickness on the moon from mare tectonic features - A formal inversion

The thickness (T) of the lunar elastic lithosphere at the time (3.6 to 3.8 billion years ago) of the earliest preserved basalt flows in circular mare basins can be estimated by inverting the observed locations of extensional tectonic features in and surrounding the maria. In performing the inversion, the lithosphere is modeled as an elastic shell with a liquid interior, and the basalt load for each mare is approximated by a set of concentric cylinders. To permit solving the forward problem of placing radial limits on the positions of the rilles around a given mare, an additional parameter F, the ratio of the radial stress at the radial limits to the maximum radial stress, is introduced. T and F are chosen to give the best weighted-squares fit of the radial limits to the observations, and are used as the initial values in a linearized matrix inversion to check the resolution and estimate errors. The application of the procedure to three maria with prominent extensional features, Humorum, Orientale, and Serenitatis, gives values of T from about 40 + or - 10 to 50 + or - 10 km, and in each case the linearized matrix equation has an exact inverse.

Comer, R. P.↗

Injection-Molded Long-Fiber Thermoplastic Composites: From Process Modeling to Prediction of Mechanical Properties

This article illustrates the predictive capabilities for long-fiber thermoplastic (LFT) composites that first simulate the injection molding of LFT structures by Autodesk® Simulation Moldflow® Insight (ASMI) to accurately predict fiber orientation and length distributions in these structures. After validating fiber orientation and length predictions against the experimental data, the predicted results are used by ASMI to compute distributions of elastic properties in the molded structures. In addition, local stress-strain responses and damage accumulation under tensile loading are predicted by an elastic-plastic damage model of EMTA-NLA, a nonlinear analysis tool implemented in ABAQUS® via user-subroutines using an incremental Eshelby-Mori-Tanaka approach. Predicted stress-strain responses up to failure and damage accumulations are compared to the experimental results to validate the model.

Injection molding, long fiber thermoplastic, proce↗

Peridynamic modeling of fracture in elastomers and composites.

The peridynamic model of solid mechanics is a mathematical theory designed to provide consistent mathematical treatment of deformations involving discontinuities, especially cracks. Unlike the partial differential equations (PDEs) of the standard theory, the fundamental equations of the peridynamic theory remain applicable on singularities such as crack surfaces and tips. These basic relations are integro-differential equations that do not require the existence of spatial derivatives of the deformation, or even continuity of the deformation. In the peridynamic theory, material points in a continuous body separated from each other by finite distances can interact directly through force densities. The interaction between each pair of points is called a bond. The dependence of the force density in a bond on the deformation provides the constitutive model for a material. By allowing the force density in a bond to depend on the deformation of other nearby bonds, as well as its own deformation, a wide spectrum of material response can be modelled. Damage is included in the constitutive model through the irreversible breakage of bonds according to some criterion. This criterion determines the critical energy release rate for a peridynamic material. In this talk, we present a general discussion of the peridynamic method and recent progress in its application to penetration and fracture in nonlinearly elastic solids. Constitutive models are presented for rubbery materials, including damage evolution laws. The deformation near a crack tip is discussed and compared with results from the standard theory. Examples demonstrating the spontaneous nucleation and growth of cracks are presented. It is also shown how the method can be applied to anisotropic media, including fiber reinforced composites. Examples show prediction of impact damage in composites and comparison against experimental measurements of damage and delamination.

36 MATERIALS SCIENCE↗

Mechanism of Spontaneous Blebbing Motion of an Oil–Water Interface: Elastic Stress Generated by a Lamellar–Lamellar Transition

A quaternary system composed of surfactant, cosurfactant, oil, and water showing spontaneous motion of the oil-water interface-under far-from-equilibrium condition is studied in order to understand nanometer-scale structures and their roles in spontaneous motion. We characterize the interfacial motion by the repetitive. extension and retraction of spherical protrusions at the interface, i.e, blebbing motion. During, the, blebbing motion, elastic aggregates are accumulated, which were characterized as surfactant lamellar structures with mean repeat distances d of 25 to 40 nm. The relationship between the structure formation and, the dynamics of the interfacial motion is still unclear. In the present study, we find that a new lamellar structure with d larger than. 80 run is formed at. the blebbing oil-water interface,. while the resultant elastic aggregates, which are the one reported before, have a lamellar structure with smaller d (25 to 40 nm). Such transition of lamellar structures from the larger d to smaller d is induced by a penetration of surfactants from an aqueous phase into the aggregates. We propose a model in which elastic stress generated by the transition-drives the blebbing motion at the interface. These results explain the link between nanometer-scale transition of lamellar structure and millimeter-scale dynamics at an oil water interface.

36 MATERIALS SCIENCE↗