Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “efficiency.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Strained-layer InGaAs/GaAs/AlGaAs single quantum well lasers with high internal quantum efficiency

Low threshold current density strained-layer In(0.2)Ga(0.8)As/GaAs/AlGaAs single quantum well lasers, emitting at 980 nm, have been grown by molecular beam epitaxy. Contrary to what has been reported for broad-area lasers with pseudomorphic InGaAs active layers grown by metalorganic chemical vapor deposition, these layers exhibit a high internal quantum efficiency (about 90 percent). The maximum external differential quantum efficiency is 70 percent, limited by an anomalously high internal loss possibly caused by a large lateral spreading of the optical mode. In addition, experimental results supporting the theoretically predicted strain-induced reduction of the valence-band nonparabolicity and density of states are presented.

Larsson, Anders↗
NASA NTRS1989

High rate concatenated coding systems using multidimensional bandwidth-efficient trellis inner codes

A concatenated coding system using two-dimensional trellis-coded MPSK inner codes and Reed-Solomon outer codes for application in high-speed satellite communication systems was proposed previously by the authors (1989). The authors extend their results to systems using symbol-oriented, multidimensional, trellis-coded MPSK inner codes. The concatenated coding systems are divided into two classes according to their achievable effective information rates. The first class uses multidimensional trellis-coded 8-PSK inner codes and achieves effective information rates around 1 b/dimension (spectral efficiency 2 b/s/Hz). The second class employs multidimensional trellis-coded 16-PSK inner codes and provides effective information rates around 1.5 b/dimension (spectral efficiency 3 b/s/Hz). Both classes provide significant coding gains over an uncoded reference system with the same effective information rate as the coded system. The results show that the symbol-oriented nature of multidimensional inner codes can provide an improvement of up to 1 dB in the overall performance of a concatenated coding system when these codes replace bit-oriented two-dimensional codes.

Deng, Robert H.↗
NASA NTRS1989

Efficiency testing of a helicopter transmission planetary reduction stage

A parametric study of the efficiency of a 310-kW (420-hp) helicopter transmission planetary test section (four planets) was performed. The purpose was to determine the planetary contribution to the overall transmission power loss. Test parameters varied were oil flow rate, oil inlet temperature, lubricant type, shaft speed, and applied torque. The measured efficiency over all the test variables ranged from 99.44 to 99.75 percent. These experimental results were compared with other experimental and computational results.

Handschuh, R. F.↗
NASA NTRS1990

Efficient real gas Navier-Stokes computations of high speed flows using an LU scheme

An efficient method to account for the chemically frozen thermodynamic and transport properties of air in three dimensional Navier-Stokes calculations was demonstrated. This approach uses an explicitly specified equation of state (EOS) so that the fluid pressure, temperature and transport properties are directly related to the flow variables. Since the pressure is explicitly known as a general function of the flow variables no assumptions are made regarding the pressure derivatives in the construction of the flux Jacobians. The method is efficient since no sub-iterations are required to deduce the pressure and temperature from the flux variables and allows different equations of state to be easily supplied to the code. The flexibility of the EOS approach is demonstrated by implementing a high order TVD upwinding scheme based upon flux differencing and Van Leer's flux vector splitting. The EOS approach is demonstrated by computing the hypersonic flow through the corner region of two mutually perpendicular flat plates and through a simplified model of a scramjet module gap-seal configuration.

Coirier, William J.↗
NASA NTRS1990

Highly efficient pseudomorphic InGaAs/GaAs/AlGaAs single quantum well lasers for monolithic integration

Highly efficient ridge waveguide pseudomorphic single quantum well lasers, emitting at 980 nm, have been fabricated from an In(0.2)Ga(0.8)As/GaAs/AlGaAs graded-index separate confinement heterostructure grown by molecular beam epitaxy. The laterial index guiding provided by the ridge reduces the anomalously large lateral loss of optical power found in gain-guided structures, thereby reducing the internal loss by more than 50 percent. The low threshold current (7.6 mA) and high differential quantum efficiency (79 percent) obtained under continuous operation as well as the transparency of the GaAs substrate to the emitted radiation render these lasers attractive for Ga-As-based optoelectronic integration.

Larsson, A.↗
NASA NTRS1990

An efficient data dependence analysis for parallelizing compilers

A novel algorithm, called the lambda test, is presented for an efficient and accurate data dependence analysis of multidimensional array references. It extends the numerical methods to allow all dimensions of array references to be tested simultaneously. Hence, it combines the efficiency and the accuracy of the both approaches. This algorithm has been implemented in PARAFRASE, a FORTRAN program parallelization restructurer developed at the University of Illinois at Urbana-Champaign. Some experimental results are presented to show its effectiveness.

Li, Zhiyuan↗
NASA NTRS1990

The use of the FFT for the efficient solution of the problem of electromagnetic scattering by a body of revolution

The enhancement of the computational efficiency of the body of revolution (BOR) scattering problem is discused with a view to making it practical for solving large-body problems. The problem of EM scattering by a perfectly conducting BOR is considered, although the methods can be extended to multilayered dielectric bodies as well. Typically, the generation of the elements of the moment method matrix consumes a major portion of the computational time. It is shown how this time can be significantly reduced by manipulating the expression for the matrix elements to permit efficient FFT computation. A technique for extracting the singularity of the Green function that appears within the integrands of the matrix diagonal is also presented, further enhancing the usefulness of the FFT. The computation time can thus be improved by at least an order of magnitude for large bodies in comparison to that for previous algorithms.

Gedney, Stephen D.↗
NASA NTRS1990

Efficiency and discrepancy in the direct simulation methods

The paper reviews the factors that affect the versatility, computational efficiency, and accuracy of the various direct simulation methods that are being applied to problems in rarefied gas dynamics. The quality of the simulation can be affected by the underlying motivation and objectives. The influence of computer hardware developments on the cost-effectiveness is discussed, as are the software factors that influence the speed with which simulation programs can be applied to new problems. Particular attention is given to a novel method that improves the efficiency of the simulation for complex three-dimensional problems. The topical issues of reduced resolution procedures, stored lists, and variance reduction schemes are discussed in some detail.

Bird, G. A.↗
NASA NTRS1990

Operational efficiency: Automatic ascent flight design

The expected increase in launch vehicle operations to support Space Station Freedom and a Lunar/Mars exploration initiative will require a more efficient approach to ascent flight design and operations. A concept is presented of continuous improvement in ascent flight design through an evolutionary process beginning with today's vehicles and continuing into the next century with the Advanced Launch System (ALS) and Advanced Manned Launch System (AMLS). A pictorial view is given of the improvement path described. The detailed objectives necessary to obtain efficiency improvements are described. The technology milestones along this evolutionary path are outlined and the accomplishments to date are summarized. The technology issues are discussed which must be addressed.

Source record↗
NASA NTRS1989

Minimum length Pb/SCIN detector for efficient cosmic ray identification

A study was made of the performance of a minimal length cosmic ray shower detector that would be light enough for space flight and would provide efficient identification of positions and protons. Cosmic ray positions are mainly produced in the decay chain of: Pion yields Muon yields Positron and they provide a measure of the matter density traversed by primary protons. Present positron flux measurements are consistent with the Leaky Box and Halo models for sources of cosmic rays. Abundant protons in the space environment are a significant source of background that would wash out the positron signal. Protons and positrons produced very distictive showers of particles when they enter matter; many studies have been published on their behavior on large calorimeter detectors. The challenge is to determine the minimal material necessary (minimal calorimeter depth) for positive particles identification. The primary instrument for the investigation is the Monte Carlo code GEANT, a library of programs from CERN that can be used to model experimental geometry, detector responses and particle interaction processes. The use of the Monte Carlo approach is crucial since statistical fluctuations in shower shape are significant. Studies conducted during the 1988 summer program showed that straightforward approaches to the problem achieved 85 to 90 percent correct identification, but left a residue of 10 to 15 percent misidentified particles. This percentage improved to a few percent when multiple shower-cut criteria were applied to the data. This summer, the same study was extended to employ several physical and statistical methods of identifying response of the calorimeter and the efficiency of the optimal shower cuts to off-normal incidence particle was determined.

Snyder, H. David↗
NASA NTRS1990

Efficiency of N use by wheat as a function of influx and efflux of NO3

Since N assimilation is one of the most costly functions of a plant, its efflux before assimilation results in a serious energy cost and loss in efficiency which could decrease yields. Efficient crop production is critical to the Closed Ecology Life Support System (CELSS). The objective is to determine the extent of efflux of the N species NO3(-), NH4(+), NO2(-), and urea after uptake, and possible means of regulation. Researchers found that NO3 efflux became serious as its substrate level increased. Efflux/Influx (E/I) of NO3(-) was greater in darkness (35 percent) than in light (14 percent), and the ratio greatly increased with substrate NO3 (-), (up to 45 percent at 10 mM). It seems advantageous to use the lowest possible nutrient concentration of NO3(-). The feasibility of using ClO3(-) was assessed and its toxicity determined.

Huffaker, R. C.↗
NASA NTRS1991

High energy efficiency and high power density proton exchange membrane fuel cells: Electrode kinetics and mass transport

The development of proton exchange membrane (PEM) fuel cell power plants with high energy efficiencies and high power densities is gaining momentum because of the vital need of such high levels of performance for extraterrestrial (space, underwater) and terrestrial (power source for electric vehicles) applications. Since 1987, considerable progress has been made in achieving energy efficiencies of about 60 percent at a current density of 200 mA/sq cm and high power densities (greater than 1 W/sq cm) in PEM fuel cells with high (4 mg/sq cm) or low (0.4 mg/sq cm) platinum loadings in electrodes. The following areas are discussed: (1) methods to obtain these high levels of performance with low Pt loading electrodes - by proton conductor impregnation into electrodes, localization of Pt near front surface; (2) a novel microelectrode technique which yields electrode kinetic parameters for oxygen reduction and mass transport parameters; (3) demonstration of lack of water transport from anode to cathode; (4) modeling analysis of PEM fuel cell for comparison with experimental results and predicting further improvements in performance; and (5) recommendations of needed research and development for achieving the above goals.

Supramaniam Srinivasan↗
NASA NTRS1990

Ideal efficiency of propellers - Theodorsen revisited

Theodorsen's 1948 analog evaluation of the parameters governing the ideal (friction-free) efficiency of propellers is updated and extended by computer. The results are presented both in his format and in a much more convenient one by Kramer that avoids iteration: curves of power coefficient at constant ideal efficiency are plotted vs propeller advance coefficient. The curves for a wide range of blade numbers are collapsed into just three sets (with some approximation) by use of multiple, shifted (and distorted) abscissae scales. Along with an overview of Theodorsen's theory, analytic asymptotic results at low and high advance coefficients are given. At the low end, the disagreement with actuator disk theory is given support and physical interpretation. At the high end, exact agreement is found with the thrust of a slender twisted delta propeller.

Ribner, H. S.↗
NASA NTRS1991

Numerical algorithm comparison for the accurate and efficient computation of high-incidence vortical flow

Computations from two Navier-Stokes codes, NSS and F3D, are presented for a tangent-ogive-cylinder body at high angle of attack. Features of this steady flow include a pair of primary vortices on the leeward side of the body as well as secondary vortices. The topological and physical plausibility of this vortical structure is discussed. The accuracy of these codes are assessed by comparison of the numerical solutions with experimental data. The effects of turbulence model, numerical dissipation, and grid refinement are presented. The overall efficiency of these codes are also assessed by examining their convergence rates, computational time per time step, and maximum allowable time step for time-accurate computations. Overall, the numerical results from both codes compared equally well with experimental data, however, the NSS code was found to be significantly more efficient than the F3D code.

Chaderjian, Neal M.↗
NASA NTRS1990

A high-efficiency ferruleless coupled-cavity traveling-wave tube with phase-adjusted taper

The design and performance of the first traveling-wave tube (TWT) to be built with a phase-adjusted taper (PAT) is discussed. By adjusting the phase of the electron bunch with respect to the RF wave for strong electron bunch formation at the beginning of the taper and strong power conversion at the end, the PAT achieves a high efficiency of power conversion from the electron beam to the RF wave. A PAT incorporated into the output section of a baseline 29-30 GHz ferruleless coupled-cavity TWT experimentally increased the peak RF power from 420 to 1000 W and the peak RF interaction efficiency from 9.6 to 22.6 percent.

Wilson, Jeffrey D.↗
NASA NTRS1991

Aperture efficiency of integrated-circuit horn antennas

The aperture efficiency of silicon integrated-circuit horn antennas has been improved by optimizing the length of the dipole probes and by coating the entire horn walls with gold. To make these measurements, a new thin-film power-density meter was developed for measuring power density with accuracies better than 5 percent. The measured aperture efficiency improved from 44 percent to 72 percent at 93 GHz. This is sufficient for use in many applications which now use machined waveguide horns.

Guo, Yong↗
NASA NTRS1991

Efficient use of direct solvers for the calculation of compressible flows

While the direct solution of systems of linear equations resulting from fluid dynamic problems has generally not been practical in the past, it is presently demonstrated that the direct method is often more efficient than the most popular iterative schemes when constructed in such a way as to take advantage of presently available vector processing capabilities and large memory. The vertical line Gauss-Seidel algorithm was chosen as the iterative method to be compared with the direct method. It is fond that the direct method becomes efficient only when large residual reductions are desired.

Riggins, David W.↗