Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “edge effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Performance Evaluation of Next-Generation Grid Automation and Controls with High PV Penetration

This paper presents a hardware-in-the-loop (BIL) simulation to evaluate the performance of an advanced grid automation architecture, referred to as data-enhanced hierarchical control (DEHC), in achieving voltage regulation and conservation voltage reduction (CVR) in distribution networks with very high photovoltaic (PV) generation. This architecture comprises an advanced distribution management system (ADMS), a distributed energy resource management system (DERMS), and grid-edge devices working synergistically to provide the grid benefits. The HIL setup used for the evaluation includes ADMS, DERMS, and grid-edge devices. The DEHC performance is evaluated in two representative scenarios considering loose and tight constraints of the power factor at the substation. The results show that the DEHC architecture is effective in achieving voltage regulation and CVR and thus enables the grid integration of high levels of PV generation.

ADMS↗
DOE OSTI2025

Observation of anomalous thermal Hall effect in a Kagome superconductor

Broken time-reversal symmetry (TRS) in superconductors can induce not only spontaneous magnetization by the finite angular momentum of Cooper pairs but also the anomalous thermal Hall effects (ATHEs), whose detection has been extremely challenging. Here, we report the successful observation of an ATHE developing below the superconducting transition temperature at zero magnetic field in the kagome-lattice superconductor CsV 3 Sb 5 . This finding is verified by the absence of a signal in a conventional type-II superconductor using the same setup and by ruling out the trapped-vortex effects through micro-Hall array measurements. Both the temperature dependence and the magnitude of the observed anomalous thermal Hall conductivity are quite different from those expected for the quantized thermal edge current of an intrinsic ATHE but consistent with extrinsic impurity-induced ATHEs in chiral superconductivity. Our study of ATHE offers an alternative approach to probe TRS breaking in the superconducting states.

Yoshida, Hiroki [Univ. of Tokyo, Chiba (Japan)] (O↗
DOE OSTI2020

Summary of Results for Idaho Accelerator Center (IAC) Experiments with Compact Electron Permanent Magnet Spectrometer (CEPMS)

The Compact Electron Permanent Magnet Spectrometer (CEPMS) shown in Figure 2 consists of collimation at the electron beam entrance, a vacuum chamber for beam transport and a removable 60 degree sector magnet constructed by SABR Enterprises (Ref 2) that is used to momentum analyze the incoming electron beam. There are electron detection planes located perpendicular to straight through and the 60 degree trajectory ports. The planes are designed to accept phosphor screens for time integrated measurements. The screens can be replaced by scintillator for time resolved measurements using gated or streak cameras. The length of the spectrometer along the beamline without the collimator is about 400mm (14”). The spectrometer requires no power supply with controls for cycling or cooling for the magnet. The entire assembly, with magnet installed, weighs about 35kg (75lbs) Figure 3 depicts central and extreme trajectories through the spectrometer for various electron energies. The chamber accommodates a +/-50mm wide detection field relative to the center trajectory. Trajectories with larger momentum (energy) are bent the least. Since the permanent magnet slides off and on with reference to the upstream edge of the vacuum chamber, it can be adjusted to various positions to slightly increase or decrease the central energy thereby changing the range of available energies. Figure 4 shows the effect of changing the location of the permanent magnet on the electron trajectory. A small inward change in r produces a longer trajectory in the magnet therefore, the same energy trajectory is bent more.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

OpenCGRA: An Open-Source Unified Framework for Modeling,Testing, and Evaluating CGRAs

Coarse-grained reconfigurable arrays (CGRAs),loosely defined as arrays of functional units (e.g, adder, sub-tractor, multiplier, divider, or larger multi-operation units, butsmaller than a general-purpose core) interconnected through aNetwork-on-Chip, provide higher flexibility than domain-specificASIC accelerators while offering increased hardware efficiencywith respect to fine-grained reconfigurable devices, such as FieldProgrammable Gate Arrays (FPGAs). The fast evolving fieldsof machine learning and edge computing, which are seeing acontinuous flow of novel algorithms and larger models, makeCGRAs ideal target architectures to allow domain specializationwithout loosing too much generality. They also generally offerquicker and more effective reconfigurability than FPGAs, po-tentially allowing adaptation during actual algorithm execution,and implement a dataflow programming paradigm that adaptswell to these emerging workloads. Designing and generating aCGRA, however, still requires to define the type and number ofthe specific functional units, implement their interconnect andthe network topology, and perform its simulation and validation,given a variety of workloads of interest.In this paper, we propose OpenCGRA, a Python-based unifiedframework that integrates generation, modeling, testing and eval-uation for CGRAs. OpenCGRA is the first open-source integratedframework able to support the full top-to-bottom design flow forspecializing and implementing CGRAs: modeling at different ab-straction levels (functional level, cycle level, register-transfer level),generation, simulation, testing at different granularities (unit test-ing, integration testing, property-based testing), and characteriza-tion (area, power, and timing). OpenCGRAs will be made availableon GitHub.

CGRA, synthesis↗
DOE OSTI2022

Dynamic fracture of glass fiber-reinforced ductile polymer matrix composites and loading rate effect

Here, the dynamic fracture of S-2 glass fiber-reinforced polymer matrix composites (FRPMCs) was investigated in this study. The matrix ductility was improved by a recently developed network topology modification technique via mixing partially reacted substructures (mPRS). The composite material was manufactured and characterized by micro-CT scanning and scanning electron microscopy (SEM). Dynamic single-edge notched bending (d-SENB) experiments were performed on the composites by using a modified split-Hopkinson pressure bar. Each specimen’s fracture process was visualized by ultrafast X-ray imaging. Such in-situ radiography enabled identifying the damage initiation below 50-micron scale and inspecting its propagation through the internal structures of opaque composites, thereby accurately quantifying the composites’ mechanical properties. Furthermore, the identical d-SENB experiments were designed and the digital image correlation (DIC) was employed to monitor the stress wave propagation on the composite specimens. The force and deflection measurements were modified and correlated to the physical damage processes. Besides, quasi-static SENB experiments were conducted to identify the loading rate effects on the composites’ fracture behaviors. The force and deflection history, bending stiffness, energy dissipation, and fracture toughness at different loading rates were quantified and compared. Finally, post-fracture analysis by micro-CT scanning and SEM provided physical observations on the variation of the fracture morphology by different loading rates.

42 ENGINEERING↗
DOE OSTI2023

The effect of composition, temperature and pressure on the oxidation state and coordination environment of copper in silicate melts

Copper is a redox variable element that may occur as Cu 0 , Cu + , and Cu 2+ in the Earth’s crust. The oxidation state will affect its partitioning between coexisting minerals, melts and fluids and hence its behaviour in magmatic processes. Copper bearing silicate glasses were quenched from melts with 23 synthetic compositions (19 CaO-Na 2 O-MgO-Al 2 O 3 -SiO 2 (CNMAS), two “granites” containing K 2 O ± H 2 O, and Fe-bearing “MORB” and “andesite”) equilibrated at oxygen fugacities (fO 2 ), expressed in log units relative to the fayalite-magnetite-quartz (FMQ) buffer, ranging from −0.7 to 14, temperatures from 900 to 1500 °C and pressures from 0 to 2.5 GPa. Cu K-edge X-ray absorption near edge structure (XANES) spectra were recorded from the glasses and a pre-edge feature in the XANES spectra was found to scale with the proportion of Cu + . Cu + /ΣCu (where ΣCu = Cu + + Cu 2+ ) was quantified by fitting the intensity of the pre-edge feature as a function of fO 2 to the thermodynamically expected relationship. Cu + /ΣCu was found to only weakly depend on melt composition, with more basic melts (e.g., basalts rather than granites) preferentially stabilising Cu 2+ . Increasing temperature stabilises Cu + , while increasing pressure had little effect on Cu + /ΣCu in CNMAS melts but preferentially stabilised Cu 2+ in granite melts. Cu + /ΣCu can be predicted in silicate melts by the empirical equation: log(Cu 2+ /Cu + ) = 0.25(ΔFMQ + 8.58 − 25050/T + 940P/T – 0.02P) − 4.73 + 5400/T + 1.99Λ + (280P – 90P2) where T is temperature in K, P is pressure in GPa and is the optical basicity of the composition. The effects of fO 2 , melt composition, temperature and pressure on Cu + /ΣCu indicate that Cu + will be the dominant oxidation state in terrestrial silicate melts (e.g., Cu + /ΣCu = 99% in an andesitic melt at 900 °C, 1 GPa and ΔFMQ = 1). The electron exchange reaction Cu 2+ + Fe 2+ → Cu + + Fe 3+ occurs on cooling and, given the abundance of Fe in natural melts, the oxidation state of Cu in natural glasses is unlikely to correspond to that in the original melt.

Copper↗
DOE OSTI2024

Loss cone effects and monotonic sheath conditions of a partially magnetized plasma sheath

In this Letter, we propose the conditions for monotonic plasma sheaths adjacent to a floating wall in the presence of an applied, oblique magnetic field. The electron velocity distribution function (VDF) at the sheath edge obtained from a kinetic model exhibits a loss cone shaped truncation. Using an approximation of the truncated VDF, we derive an analytical framework of the sheath edge condition (i.e., Bohm condition), namely, the relation of ion injection velocity and sheath potential drop as a function of the magnetic field angle. The results show that the sheath edge velocity and total potential drop decrease for a steady-state sheath, which eventually collapses when the magnetic field lines become parallel to the wall.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Deep level study of chlorine-based dry etched β-Ga 2 O 3

Chlorine-based gases are used for the reactive ion etching (RIE) of β-Ga 2 O 3 . However, the effects of Cl-plasma on the electronic properties of β-Ga 2 O 3 are not known. In order to shed light on this topic, we carried out an experimental and theoretical study on β-Ga 2 O 3 epilayers treated with Cl 2 /Ar or BCl 3 /Ar plasma. We found four traps in the 0.2–0.8 eV energy range below the conduction band edge (EC). Two of these, located at E C -0.24 eV and E C -0.28 eV, arise only when the epilayers are treated with BCl 3 /Ar. While the involvement of Cl in their microscopic structure is not discarded, the possibility that these two levels might have an intrinsic nature seems more plausible. Our findings might explain the reported effects on the Schottky barrier diodes of β-Ga 2 O 3 when RIE is employed during processing.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Abelian SU(N) 1 chiral spin liquids on the square lattice

In the physics of the Fractional Quantum Hall (FQH) effect, a zoo of Abelian topological phases can be obtained by varying the magnetic field. Aiming to reach the same phenomenology in spin-like systems, in this work we propose a family of SU(N)-symmetric models in the fundamental representation, on the square lattice with short-range interactions restricted to triangular units, a natural generalization for arbitrary N of an SU(3) model studied previously where time-reversal symmetry is broken explicitly. Guided by the recent discovery of SU(2) 1 and SU(3) 1 chiral spin liquids (CSL) on similar models we search for topological SU(N) 1 CSL in some range of the Hamiltonian parameters via a combination of complementary numerical methods such as exact diagonaliza- tions (ED), infinite density matrix renormalization group (iDMRG) and infinite Projected Entangled Pair State (iPEPS). Extensive ED on small (periodic and open) clusters up to N = 10 and an innovative SU(N)-symmetric version of iDMRG to compute entanglement spectra on (infinitely-long) cylinders in all topological sectors pro- vide unambiguous signatures of the SU(N) 1 character of the chiral liquids. An SU(4)-symmetric chiral PEPS, constructed in a manner similar to its SU(2) and SU(3) analogs, is shown to give a good variational ansatz of the N = 4 ground state, with chiral edge modes originating from the PEPS holographic bulk-edge correspondence. Finally, we discuss the possible observation of such Abelian CSL in ultracold atom setups where the possibility of varying N provides a tuning parameter similar to the magnetic field in the physics of the FQH effect.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2021

Investigations of LHW-plasma coupling and current drive at high density related to H-mode experiments in EAST

Two important issues in achieving lower hybrid current drive (LHCD) high confinement plasma in EAST are to improve lower hybrid wave (LHW)-plasma coupling and to drive the plasma current at a high density. Studies in different configurations with different directions of toroidal magnetic field (Bt) show that the density near the antenna is affected by both the radial electric field induced by plasma without a LHW (Er-plasma) in the scrape off layer (SOL), and the radial electric field induced by LHW power (Er-LH) near the grill. Investigations indicate that Er× Btin the SOL leads to a different effect of configuration on the LHW-plasma coupling and Er-LH× Btaccounts for the asymmetric density behaviour in the SOL observed in the experiments, where Eris the total radial electric field in the SOL. Modelling of parametric instability (PI), collisional absorption (CA) and scattering from density fluctuations (SDF) in the edge region, performed considering the parameters of high density LHCD experiments in EAST, has shown that these mechanisms could be responsible for the low current drive (CD) efficiency at high density. Radiofrequency probe spectra, useful for documenting PI occurrence, show sidebands whose amplitude in the case of the lithiated vacuum chamber is smaller than in the case of poor lithiation, consistently with growth rates from PI modeling of the respective reference discharges. Since strong lithiation is also expected to diminish the parasitic effect on the LHCD of the remaining possible mechanisms, this appears to be a useful method for improving LHCD efficiency at a high density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Hydrokinetic energy harvesting from slow currents using flow-induced oscillations

To harness marine hydrokinetic energy from slow flows, which constitute the majority of currents, tides, and rivers, new Passive Turbulence Control (PTC), consisting of large turbulence stimulators, is tested experimentally on circular cylinders on springs. Here, this study experimentally investigates the effect of PTC on the onset of Flow-Induced Oscillations (FIO) and particularly the relative onset of Vortex-Induced Vibrations (VIV) and galloping. Experiments are conducted in the Low Turbulence Free Surface Water Channel, University of Michigan. Fixed are: mass ratio m* = 1.48, aspect ratio l/D = 10.29, and total damping ratio ζ = 0.04. Parameters are: cylinder diameter D, spring stiffness K, PTC location and height, and flow speed U$\in$[0.36 m/s-1.45 m/s]. Placing the leading edge of PTC at 40–60° induces high amplitude FIO while placement at 10–20° suppresses FIO. As PTC height increases, VIV and galloping initiate earlier and exhibit higher amplitude with a steeper slope. Lower spring stiffness initiates VIV earlier by reducing the oscillator natural frequency in water. Even though large PTC maintained its effectiveness in initiating galloping early, it has no effect on the earlier initiation of VIV, which starts at a nearly fixed reduced velocity. Lower spring stiffness and large PTC enable power generation at low current speed (0.2 m/s).

16 TIDAL AND WAVE POWER↗
DOE OSTI2020

Single-Crystal Growth and Room-Temperature Magnetocaloric Effect of X-Type Hexaferrite Sr 2 Co 2 Fe 28 O 46

X-type hexaferrites have been receiving considerable attention due to their promising applications in many magnetic-electronic fields. However, the growth of single-crystal X-type hexaferrite is still a challenge. Herein we reported, for the first time, the preparation of single crystal X-type hexaferrite Sr 2 Co 2 Fe 28 O 46 (Sr 2 Co 2 X) with high-quality and large size using floating-zone method with laser as the heating source. The crystals show rhombohedral symmetry with space group of R-3m (No. 166, a = 5.8935(1) Å and c = 83.7438(17) Å). Co 2+ and Fe 3+ oxidation states were confirmed by the X-ray absorption near-edge spectroscopy. The prepared Sr 2 Co 2 X exhibits a spin reorientation transition from easy-cone to easy-axis at T 2 of 343 K and a ferrimagnetism–paramagnetism transition at Curie temperature (TC) of ~743 K. The spin reorientation transition was accompanied by magnetocaloric effect (MCE). Both conventional and inverse MCEs were observed near T 2 with a magnetic field applied along the c-axis. The maximum value of the magnetic entropy change along the c-axis was evaluated to be 1.1 J/kg·K for a magnetic field change of 5 T.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Effect of oxidation on the release of multiple metals from industrially polluted sediments and synchrotron-based evidence of Cu–S dynamic association

Disposal operations for industrially polluted sediments are usually accompanied by disturbance and resuspension, which can induce metal remobilization and secondary pollution. Evaluating the risk of metal release under various redox conditions is fundamental for predicting contaminant mobilization and guiding remediation measures. An abandoned oxidation pond, Yanjia Lake, China, was selected as a typical industrially polluted site. Re-suspension experiments were carried out by mixing polluted sediments with lake water under oxic or anoxic conditions, then investigating the effect of oxidation conditions on the release of multiple metals. Metal concentrations and aqueous chemistry in the overlying water were monitored. Synchrotron-based methods, including X-ray absorption near-edge structure (XANES) and extended X-ray absorption fine structure (EXAFS), were used to characterize oxidation states and coordination conditions of metals in sediments. The release of metals, including Cr, Co, Ni, Cu, Zn, Se, Mo, Sn, Cd, and Pb, was enhanced under oxic vs. anoxic conditions. The XANES analysis revealed that elevated Cr and Zn concentrations under oxic conditions likely resulted from the oxidation of Cr(III) and oxidizing dissolution of ZnS, respectively. K-edge Cu XANES, S XANES, and Cu EXAFS analyses reconstructed the Cu–S association, indicating that S-related oxidation promoted Cu release and Cu–O partly replaced Cu–S in the sediment after a 7-day oxic treatment. The release of most metals was promoted under oxic conditions, resulting from the oxidation of sulfides and metals as indicated by aqueous and synchrotron-based evidence. The risk of secondary pollution is greatly enhanced under oxic conditions, which suggests that measures should be taken to minimize the redox disturbance during sediment remediation. This information can guide the management of sediments in Yanjia Lake and other contaminated sites with similar properties.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Countercurrent flow characteristics of next generation solvent in novel 3D printed columns for carbon capture

Solvent based absorption for carbon dioxide capture in a packed column is being considered as an efficient technology for the decarbonization process of point source. Significant efforts are underway to improve the design of packings with the cutting edge 3D printing technology for efficient carbon capture. Accordingly, multiphase flow studies were conducted to assess the performance of novel 3D printed columns with various triply periodic minimal surface (TPMS) designs. The effects of solvent properties, liquid and gas loads on the performance of TPMS columns are extensively explored. Hydrodynamics of the potential water-lean solvents (EEMPA) as well as aqueous monoethanolamine (MEA) solvent for carbon capture are evaluated and compared. The interfacial area and liquid holdup increase with increasing liquid loads (q L ) for TPMS columns. Schwarz column consistently shows the highest liquid holdup value. The EEMPA exhibits higher values for the interfacial area (10–15 %) and liquid holdup (~4 %) in comparison to the MEA. TPMS columns exhibit the intermediate value of dry pressure drop between the random and the structure packed columns. Among selected TPMS columns, the gyroid packing shows the lowest pressure drop. The gas load has marginal impact on the interfacial area at lower value while a higher gas load leads to column’s flooding. Prior to the flooding, the interfacial area in TMPS packings rises with increased gas load at a fixed liquid load except Schwarz packing where interfacial area is incentive to the gas load. Additionally, the liquid holdup and wet pressure drop rise as gas load increases in TPMS columns. Overall, Fisher Koch packing is more susceptible to flood as compared to other TPMS packings. Flow regimes: loading and flooding are also delineated in the TPMS packings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Active wall conditioning through boron powder injection compatible $\mathrm{ELM}$ control in $\mathrm{EAST}$

Real-time wall conditioning and edge-localized mode (ELM) suppression through real-time boron powder injection into high-confinement mode discharges of the Experimental Advanced Superconducting Tokamak (EAST) have been investigated. The boron powder injection effectively conditioned the plasma-facing components, as shown by the reductions in low-Z and high-Z impurities and the global recycling level in the whole inner vessel, and suppressed the strong magnetohydrodynamic (MHD) activity in the plasma core. The improved wall conditions also resulted in an earlier transition from L- to H-mode. Boron powder injection also effectively suppressed ELM in the lower single null configuration with BT in the favorable direction while leaving the plasma density and stored energy largely unaffected.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Clar’s Goblet on Graphene: Field-Modulated Charge Transfer in a Hydrocarbon Heterostructure

In certain configurations, the aromatic properties of benzene ring structured molecules allow for unpaired, reactive valence electrons (known as radicals). Clar’s goblets are such molecules. With an even number of unpaired radicals, these nanographenes are topologically frustrated hydrocarbons in which π-bonding network and topology of edges give rise to the magnetism. Clar’s goblets are therefore valued as prospective qubits provided they can be modulated between magnetic states. Here, using first-principles DFT, we demonstrate the effects of adsorption on both molecule and substrate in a graphene–Clar’s goblet heterostructure. We look at the energy difference bewteen FM and AFM states of the system and discuss underlying physical and chemical mechanisms in reference to the highest occupied molecular orbital (HOMO) and second HOMO (HOMO–1). We find that the HOMO of the molecule in the FM state is right at the Fermi surface, which leads to the hybridization between molecular state and the graphene state near the Dirac point. Furthermore, we investigate qualitative changes in charge realignment and magnetic state under a variable electric field. Transitions from FM to AFM and back to FM states are observed.

Bruce, Adam V.↗
DOE OSTI2026

Highly-destabilized ligand field excited states of iron carbene complexes and their relation to charge transfer state lifetimes

Lifetimes of photoexcited charge transfer (CT) states in transition metal chromophores are influenced by low-lying ligand field (LF) excited states, especially for 3d metal complexes. To manipulate interactions between LF and CT states, it is important to be able to control LF excited state energies using tunable synthetic variables. In this report, we use Fe 2p3d L 3 -edge resonant inelastic X-ray scattering (RIXS) to measure LF excited state energies of three homoleptic iron chromophores coordinated by strong-field N-heterocyclic carbenes (NHCs). We investigate the effect of oxidation state and ligand scaffold on LF energies and covalency parameters. A cyclometalated bis(NHC) ligand affords both high LF excited state energies (and thus high 10 Dq) as well as high metal–ligand covalency compared to other iron complexes with very strong-field ligands. However, for the set of complexes investigated, we do not observe meaningful correlation between the LF excited state energies and the CT excited state lifetimes. These results illustrate that targeting long-lived CT excited states necessitates control of multiple molecular excited state properties, with destabilization of the LF excited state energies proving necessary, but insufficient, to control the CT excited state lifetime in Fe carbene complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

An automated fast neutron computed tomography instrument with on-line focusing for non-destructive evaluation

A fast neutron tomography imaging instrument has been designed, built, and tested at The Ohio State University 500 kW Research Reactor on a fast neutron beamline with a peak neutron flux ≈5.4 × 107 n·cm−2·s−1 at 1.6 MeV median neutron energy. The instrument and beamline are also configurable for thermal neutron imaging. The imaging apparatus is composed of a lens coupled, water-cooled Electron Multiplying Charge Coupled Device camera, a front-surface mirror, and a high light yield plastic Polyvinyl toluene scintillator. The instrument sits on a mobile cart. A total of 5 motion-control stages are built into the system for XYZ and rotational degrees of freedom for sample positioning; the fifth stage fine tunes the focal distance between the camera and the scintillator to achieve on-line focusing. A Python code with a user-friendly graphical user interface controls the fully automated image acquisition, not requiring user interaction, yet facilitating tracking of the image acquisition. A complete fast neutron computed tomography dataset with 360 projections requires less than 3 h, with 30 s per projection. On-line focusing is accomplished with a commercial, off-the-shelf, dielectrically actuated liquid lens. Finally, tomographic reconstructions are visualized using the Livermore Tomography Tools software package. The effective pixel size (width and height) is ≈0.1058 mm, yielding a minimum voxel size of 0.1058 × 0.1058 × 0.1058 mm3, and produces a spatial resolution of 231 μm when calculated from knife-edge measurements.

Bisbee, M. G. (ORCID:0000000313466697)↗