SEARCH · Engineering Papers

Results for “dynamic temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

All sources NASA NTRS DOE OSTI

NASA NTRS1972

Feasibility demonstration of a hyperfiltration technique to reclaim shower wastewater at elevated temperatures

A feasibility demonstration of a hyperfiltration technique to determine its capability to reclaim shower wastewater at elevated temperature was conducted. Approximately twenty (20) gallons of typical shower water were processed through a dynamically formed membrane at a temperature of 167 F. Chemical and bacterial analyses of the product water are presented which show compliance with all potable water requirements established for extended manned space missions. In addition, subsystem characteristics and capabilities are discussed.

Hester, J. C.↗

NASA NTRS1981

Control system development for an organic Rankine cycle engine

The development of a control logic to govern the toluene throttle valve and verify the stability of the speed control approach for multiple engines connected to a 1 MWe point focus solar generator installation for distributed applications is presented. The toluene is is pumped by booster and main feed pumps through a regenerator to the parabolic focus receiver, with the flow rate controlled by a valve to remain at critical level of 4.1 MPa. The valve changes the inlet pressure at the turbine nozzle block. Each concentrator would produce 76 kWth and 20 kWe. Dynamic variables in the logic account for insolation variation, fluid temperature, ac grid voltage, the thermal dynamics of the regenerator, and variations in the head supplied by the feed pump. Separate analyses are presented for the turbine shaft speed and toluene loop dynamics. The resulting logic is considered preliminary and suitable only in full insolation conditions. Extension of the model to nonlinear perturbations is indicated.

Bergthold, F. M., Jr.↗

NASA NTRSDate not supplied

Non-Additivity of the Midlatitude Circulation Response to Regional Arctic Temperature Anomalies: The Role of the Stratosphere

Previous studies have documented the impact of the Arctic sea ice loss and associated warming on the midlatitude weather and climate, especially the influence of sea ice retreat over the Barents-Kara Sea on the North Atlantic and Europe regions. However, less attention has been given to other geographical locations over the Arctic, and to the linear additivity of the circulation response to regional Arctic sea ice loss and temperature anomalies. Using a simplified dry dynamical core model, we demonstrate that responses to regional Arctic temperature anomalies over the Barents-Kara Sea, Baffin Bay-Davis Strait-Labrador Sea, and East Siberia-Chukchi Sea, separately, cause similar equatorward shift of the tropospheric jet, but different stratospheric polar vortex responses. Furthermore, responses to regional Arctic temperature anomalies are not linearly additive, and the residual resembles a positive Northern Annular Mode-like structure. Additional targeted experiments highlight the stratospheric influence in the non-additivity of the midlatitude tropospheric response.

Bithi De↗

NASA NTRSDate not supplied

The NASA Turbulent Heat Flux Experiments: Summary and Lessons Learned

The Turbulent Heat Flux (THX) experiments were conducted at NASA Glenn Research Center (GRC) in order to collect measurements of velocities and temperatures for computational fluid dynamics (CFD) validation of heated flows, with a focus on propulsion system components. The experiments spanned 5 phases; four of which were conducted in the GRC AeroAcoustic Propulsion Laboratory (AAPL) using the Small Hot Jet Flow Rig (SHJAR). In addition to making velocity measurements with Particle Image Velocimetry (PIV), the THX experiments introduced a new Raman-scattering based capability to measure temperatures. Computational studies were also conducted for each of the experimental configurations, in order to provide a baseline of expected CFD results and conduct an assessment of the capability of various CFD approaches for calculating flows where the turbulent transport of heat was important. Two of the collected sets of data were used for American Institute of Aeronautics and Astronautics (AIAA) Propulsion Aerodynamic Workshops (PAWs). The data set from the 5th phase, collected for heated supersonic jets, was also used to construct new validation cases for the NASA Turbulence Model Resource (TMR). This paper provides an overview of the experiments and associated computations for each of the 5 test phases. Key experimental findings are presented. Lessons learned are provided concerning the effect of computational modeling choice on accuracy of predicting turbulent flows where thermal transport is important. Emphasis is placed on comparing Reynolds- averaged Navier-Stokes approaches with large-eddy simulation approaches. The benefits of utilizing a conjugate heat transfer method in conjunction with CFD solver for film cooling is demonstrated.

RANS↗

NASA NTRSDate not supplied

The NASA Turbulent Heat Flux (THX) Experiments: Summary and Lessons Learned

The Turbulent Heat Flux (THX) experiments were conducted at NASA Glenn Research Center (GRC) in order to collect measurements of velocities and temperatures for computational fluid dynamics (CFD) validation of heated flows, with a focus on propulsion system components. The experiments spanned 5 phases; four of which were conducted in the GRC AeroAcoustic Propulsion Laboratory (AAPL) using the Small Hot Jet Flow Rig (SHJAR). In addition to making velocity measurements with Particle Image Velocimetry (PIV), the THX experiments introduced a new Raman-scattering based capability to measure temperatures. Computational studies were also conducted for each of the experimental configurations, in order to provide a baseline of expected CFD results and conduct an assessment of the capability of various CFD approaches for calculating flows where the turbulent transport of heat was important. Two of the collected sets of data were used for American Institute of Aeronautics and Astronautics (AIAA) Propulsion Aerodynamic Workshops (PAWs). The data set from the 5th phase, collected for heated supersonic jets, was also used to construct new validation cases for the NASA Turbulence Model Resource (TMR). This paper provides an overview of the experiments and associated computations for each of the 5 test phases. Key experimental findings are presented. Lessons learned are provided concerning the effect of computational modeling choice on accuracy of predicting turbulent flows where thermal transport is important. Emphasis is placed on comparing Reynolds-averaged Navier-Stokes approaches with large-eddy simulation approaches. The benefits of utilizing a conjugate heat transfer method in conjunction with CFD solver for film cooling is demonstrated.

RANS↗

DOE OSTI2024

Quantifying the Role of Ocean Dynamics in SST Variability across GCMs and Observations

Abstract Midlatitude SSTs forced by mesoscale oceanic processes can affect the large-scale atmosphere, pointing to the ocean’s crucial role outside the tropics. Previous studies have shown oceanic mesoscale processes’ effect on global and regional climate variability. This study quantifies the local contribution of ocean dynamics to mixed-layer temperature across the globe by directly estimating the ocean heat flux divergence resolved by state-of-the-art ocean reanalysis, eddy-resolving, and eddy-parameterized versions of two U.S. national climate models and indirectly from air–sea flux satellite-based estimates. Our results show that the eddy-resolving climate simulations resolve mixed-layer temperature variances that are larger and closer to those inferred from observations than both their eddy-parameterized counterparts and ECCO over much of the extratropics. The observations and the eddy-resolving models indicate a more significant role of ocean dynamics in the mixed-layer temperature variability than the surface fluxes over most extratropics compared to their eddy-parameterized versions. A frequency domain analysis shows that the better-resolved ocean mesoscale and thermal gradients enhance the variance over a time scale from 2 months to 30 years. Results show agreement in the ocean’s contribution among satellite-based estimates, ocean reanalysis products, and ocean eddy-resolving simulations. At the same time, differences emerge for ECCO and the eddy-parameterized models, suggesting that surface fluxes account for a larger fraction of the mixed-layer temperature variability in most of the extratropics.

Siqueira, L.↗

NASA NTRS2005

Zonal-Mean Temperature Variations Inferred from SABER Measurements on TIMED Compared with UARS Observations

In the Numerical Spectral Model (NSM, Mayr et al., 2003), small-scale gravity waves propagating in the north/south direction can generate zonal mean (m = 0) meridional wind oscillations with periods between 2 and 4 months. These oscillations tend to be confined to low latitudes and have been interpreted to be the meridional counterpart of the wave-driven Quasi Biennial Oscillation in the zonal circulation. Wave driven meridional winds across the equator should generate, due to dynamical heating and cooling, temperature oscillations with opposite phase in the two hemispheres. We have analyzed SABER temperature measurements in the altitude range between 55 and 95 km to investigate the existence such variations. Because there are also strong tidal signatures (up to approximately 20 K) in the data, our algorithm estimates both mean values and tides together from the data. Based on SABER temperature data, the intra-annual variations with periods between 2 and 4 months can have amplitudes up to 5 K or more, depending on the altitude. Their amplitudes are in qualitative agreement with those inferred Erom UARS data (from different years). The SABER temperature variations also reveal pronounced hemispherical asymmetries, which are qualitatively consistent with wave driven meridional wind oscillations across the equator. Oscillations with similar periods have been seen in the meridional winds based on UARS data (Huang and Reber, 2003).

Huang, Frank T.↗

DOE OSTI2020

Revealing nanoscale dynamics during an epoxy curing reaction with x-ray photon correlation spectroscopy

In this work the evolution of nanoscale properties is measured during the thermally triggered curing of an industrial epoxy adhesive. We use x-ray photon correlation spectroscopy (XPCS) to track the progression of the curing reaction through the local dynamics of filler particles that reflect the formation of a thermoset network. Out-of-equilibrium dynamics are resolved through identification and analysis of the intensity– intensity autocorrelation functions obtained from XPCS. The characteristic time scale and local velocity of the filler is calculated as functions of time and temperature. We find that the dynamics speed up when approaching the curing temperature (T cure ), and decay rapidly once T cure is reached. We compare the results from XPCS to conventional macroscale characterization by differential scanning calorimetry (DSC). The demonstration and implementation of nanoscale characterization of curing reactions by XPCS proves useful for future development and optimization of epoxy thermoset materials and other industrial adhesive systems.

36 MATERIALS SCIENCE↗

NASA NTRS2002

The Influence of Tropospheric Processes in Modeling the Middle Atmosphere with Gravity Waves

Our Numerical Spectral Model (NSM) extends from the ground up into the thermosphere and has a vertical grid point resolution of about 0.5 km to resolve the interactions of gravity waves (GWs) described with Hines' Doppler Spread Parameterization (DSP). This model produces in the stratosphere and mesosphere the major features of QBO, SAO, tides, and planetary waves. The purpose of this paper is to discuss results from an initial study with our 3D model that shows how certain tropospheric processes can affect the dynamics of the middle atmosphere. Under the influence of tropospheric heating, and augmented by GW interactions, two distinct but related processes can be identified. (1) A meridional circulation develops in the stratosphere, with rising motions at low latitudes that are in magnitude comparable to the downward propagation of the QBO. As Dunkerton pointed out, a larger GW source is then required to reproduce the observed QBO, which tends to move us closer to the values recommended for the DSP. This has significant consequences for our model results that describe the upper mesosphere, considering the general importance of GWs for this region and in influencing planetary waves (e.g., 2-day wave) and tides in particular. (2) Tropospheric heating produces zonal jets near the tropopause that are related to latitudinal variations in pressure and reversing temperature variations (resembling the dynamical conditions near the mesopause), which in turn is conducive to generate baroclinic instability. Modeling results show that our ability to generate the QBO critically depends on the magnitude of the temperature reversal that is a measure of this instability. Planetary waves are generated in this process, which can apparently interfere with or augment the GW interactions. As originally demonstrated by Lindzen and Holton, the eastward propagating Kelvin waves and westward propagating Rossby gravity waves (generated by tropospheric convection) can in principle provide the acceleration to influence the QBO, and we were able to confirm this with our 3D model.

Mayr, H. G.↗

NASA NTRS2009

Simulation of RCC Crack Growth Due to Carbon Oxidation in High-Temperature Gas Environments

The carbon wall oxidation technique coupled with a CFD technique was employed to study the flow in the expanding crack channel caused by the oxidation of the channel carbon walls. The recessing 3D surface morphing procedure was developed and tested in comparison with the arcjet experimental results. The multi-block structured adaptive meshing was used to model the computational domain changes due to the wall recession. Wall regression rates for a reinforced carbon-carbon (RCC) samples, that were tested in a high enthalpy arcjet environment, were computationally obtained and used to assess the channel expansion. The test geometry and flow conditions render the flow regime as the transitional to continuum, therefore Navier-Stokes gas dynamic approach with the temperature jump and velocity slip correction to the boundary conditions was used. The modeled mechanism for wall material loss was atomic oxygen reaction with bare carbon. The predicted channel growth was found to agree with arcjet observations. Local gas flow field results were found to affect the oxidation rate in a manner that cannot be predicted by previous mass loss correlations. The method holds promise for future modeling of materials gas-dynamic interactions for hypersonic flight.

Titov, E. V.↗

NASA NTRS2001

Packaging Technology Developed for High-Temperature Silicon Carbide Microsystems

High-temperature electronics and sensors are necessary for harsh-environment space and aeronautical applications, such as sensors and electronics for space missions to the inner solar system, sensors for in situ combustion and emission monitoring, and electronics for combustion control for aeronautical and automotive engines. However, these devices cannot be used until they can be packaged in appropriate forms for specific applications. Suitable packaging technology for operation temperatures up to 500 C and beyond is not commercially available. Thus, the development of a systematic high-temperature packaging technology for SiC-based microsystems is essential for both in situ testing and commercializing high-temperature SiC sensors and electronics. In response to these needs, researchers at Glenn innovatively designed, fabricated, and assembled a new prototype electronic package for high-temperature electronic microsystems using ceramic substrates (aluminum nitride and aluminum oxide) and gold (Au) thick-film metallization. Packaging components include a ceramic packaging frame, thick-film metallization-based interconnection system, and a low electrical resistance SiC die-attachment scheme. Both the materials and fabrication process of the basic packaging components have been tested with an in-house-fabricated SiC semiconductor test chip in an oxidizing environment at temperatures from room temperature to 500 C for more than 1000 hr. These test results set lifetime records for both high-temperature electronic packaging and high-temperature electronic device testing. As required, the thick-film-based interconnection system demonstrated low (2.5 times of the room-temperature resistance of the Au conductor) and stable (decreased 3 percent in 1500 hr of continuous testing) electrical resistance at 500 C in an oxidizing environment. Also as required, the electrical isolation impedance between printed wires that were not electrically joined by a wire bond remained high (greater than 0.4 GW) at 500 C in air. The attached SiC diode demonstrated low (less than 3.8 W/mm2) and relatively consistent dynamic resistance from room temperature to 500 C. These results indicate that the prototype package and the compatible die-attach scheme meet the initial design standards for high-temperature, low-power, and long-term operation. This technology will be further developed and evaluated, especially with more mechanical tests of each packaging element for operation at higher temperatures and longer lifetimes.

Chen, Liang-Yu↗

NASA NTRS1976

Development of a solid propellant viscoelastic dynamic model

The results of a one year study to develop a dynamic response model for the Space Shuttle Solid Rocket Motor (SRM) propellant are presented. An extensive literature survey was conducted, from which it was concluded that the only significant variables affecting the dynamic response of the SRM propellant are temperature and frequency. Based on this study, and experimental data on propellants related to the SRM propellant, a dynamic constitutive model was developed in the form of a simple power law with temperature incorporated in the form of a modified power law. A computer program was generated which performs a least-squares curve-fit of laboratory data to determine the model parameters and it calculates dynamic moduli at any desired temperature and frequency. Additional studies investigated dynamic scaling laws and the extent of coupling between the SRM propellant and motor cases. It was found, in agreement with other investigations, that the propellant provides all of the mass and damping characteristics whereas the case provides all of the stiffness.

Hufferd, W. L.↗

DOE OSTI2025

Real-Time Lifetime Prediction of Semiconductor Devices Using Hardware-in-the-Loop

This paper presents a unique approach to enable real-time lifespan prediction of semiconductor power modules using a Hardware-in-the-Loop (HIL) system. By integrating the module's overall loss characteristics-specifically switching and conduction losses-with a thermoelectric model of the thermal management system, this research demonstrates that the model can dynamically estimates the junction temperature profile of the semiconductor devices in response to a changing torque demand profile for the motor drive system. This capability enables continuous monitoring of the module's operational time and cumulative stress induced on the devices to compute accumulated remaining lifetime or time-to-failure (TTF). This study provides an architectural framework for the HIL system with high-fidelity component models of multiple physical domains, allowing simulation of dynamic behaviors of a closely-coupled motor drive system. The advanced real-time computation and measurement functionalities of the HIL system allow for both dynamic lifetime calculations based on simulated data and aggregate lifetime predictions utilizing historical data. Moreover, this paper details an algorithm that not only computes cumulative damage but also synthesizes these data into a comprehensive aggregated lifetime metric. This methodology can enhance the maintenance scheduling strategies and operational reliability of semiconductor devices in critical applications, ultimately extending their service life while optimizing performance.

hardware-in-the-loop (HIL)↗

DOE OSTI2026

Utilizing the deuterium-tritium fusion resonance to diagnose thermal runaway in igniting plasmas

For high-efficiency inertial confinement fusion implosions, it is predicted that a burning hot spot will successfully encompass all surrounding fuel and then transition into a thermal runaway where the internal energy increase from fusion occurs on a timescale faster than the expansion of the fuel is able to quench the fusion chain reaction after ignition occurs. Observation of this dynamic phase transition would indicate distinct burn properties and indicate an implosion's robustness. A technique for diagnosing the presence of thermal runaway from measurements of nuclear reaction history is presented. The technique is based on taking the logarithmic derivative of the nuclear reaction history, called the 𝛼 curve, and allowing a mathematical decoupling of the mass, volume, and thermal reactivity in the fusion reaction rate equation. During thermal runaway, where the thermal temperature dominates the burn dynamics, a maximum in the 𝛼 curve is found where there is a maximum in the first derivative of the thermal fusion reactivity, an effect to the deuterium-tritium (DT) fusion cross-section resonance. This provides a distinct signature related to the fundamental nature of the DT fusion nuclear resonance and signifies the transition into the fusion thermal instability. Impacts of charged particle transport on the effect are also assessed and the analytical formulas are compared and found to be in agreement with radiation hydrodynamic codes.

high-energy-density plasmas↗

DOE OSTI2024

Photo‐Induced Charge State Dynamics of the Neutral and Negatively Charged Silicon Vacancy Centers in Room‐Temperature Diamond

Abstract The silicon vacancy (SiV) center in diamond is drawing much attention due to its optical and spin properties, attractive for quantum information processing and sensing. Comparatively little is known, however, about the dynamics governing SiV charge state interconversion mainly due to challenges associated with generating, stabilizing, and characterizing all possible charge states, particularly at room temperature. Here, multi‐color confocal microscopy and density functional theory are used to examine photo‐induced SiV recombination — from neutral, to single‐, to double‐negatively charged — over a broad spectral window in chemical‐vapor‐deposition (CVD) diamond under ambient conditions. For the SiV 0 to SiV ‐ transition, a linear growth of the photo‐recombination rate with laser power at all observed wavelengths is found, a hallmark of single photon dynamics. Laser excitation of SiV ‒ , on the other hand, yields only fractional recombination into SiV 2‒ , a finding that is interpreted in terms of a photo‐activated electron tunneling process from proximal nitrogen atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Step-loaded creep testing of Zircaloy-4 cladding at higher temperatures in the α-phase

A refined understanding of zirconium-based cladding thermomechanical performance during rapid transients is essential for enhancing the safety and operation of light-water reactors. Traditional models for zirconium alloys under accident conditions generally assume that creep dominates fuel cladding performance. Here, these historic models have largely remained unchanged and serve as the basis for safety criteria development. As the U.S. nuclear industry pursues higher burnup levels, the increased release of fission gases during transients raises the risk of cladding failure in the low-temperature hcp α-phase, making the fidelity of these models of greater importance. Creep testing was conducted from 550–700°C with 25–120 MPa applied hoop stresses to investigate Zircaloy-4 deformation at accident-relevant temperatures in the α-phase. Step-loading was employed to capture creep behavior across a wide stress range from a single sample. The stress-strain rate data at higher temperatures (650 and 700°C) were well-described by isotropic versions of the Erbacher and Kaddour models, while the lower temperature data (550 and 600°C) were underpredicted by both anisotropic and isotropic model variants. Greater strain rates during the initial loading step at 650 and 700°C were attributed to recrystallization and grain growth of sub-micron crystallites. Yet, texture analysis revealed the basal split texture remained after testing. These observations produced results suggesting Zircaloy-4 claddings experience higher creep rates across the α-phase than previously thought, possibly related to dynamic anisotropy due to temperature dependent activation of deformation mechanisms, effects of biaxial loading, and variation in material condition between the current testing used in previous model development.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Drivers of Historical and Future Coastal Runoff Across the Arctic and Sub‐Arctic Subregions of Alaska, USA

This study investigates historical and future coastal runoff across the Arctic and sub-Arctic subregions of Alaska, USA, emphasising changes in terrestrial hydrology and their implications for coastal discharge. Using the physically based SnowModel-HydroFlow framework, historical (1991–2020) and future (2071–2100) coastal discharge climatologies were simulated, incorporating meteorological, topographic, and land cover inputs. Results reveal distinct seasonal and spatial patterns in temperature, precipitation, and snow dynamics across the Beaufort, Chukchi, Yukon, and Bristol subregions. Future projections suggest significant warming and shifts in hydrological regimes, such as increased annual precipitation and coastal discharge totals. Following a high emissions, business as usual pathway (SSP5-8.5), coastal discharge hydrographs in the Beaufort and Yukon subregions remain snow dominated with increases in discharge in nearly all months, while Chukchi and Bristol subregions shift from snow dominated to rain dominated. These changes are linked to rising temperatures, decreasing snow precipitation fractions, and altered freezing levels, with implications for water storage, timing, and availability. This research provides insights into the drivers and consequences of hydrological changes in a rapidly warming Arctic, supporting efforts to predict and mitigate the impacts on coastal and marine ecosystems.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Microscopic Dynamics of Inverse Wormlike Micelles Probed Using X-ray Photon Correlation Spectroscopy

Wormlike micelles (WLMs) are ubiquitous viscoelastic modifiers that share properties with polymer solutions. While 5 their macroscopic rheology is well-understood, their microscopic dynamics are less studied because they span a large range of time 6 and length scales. In this work, we demonstrate the use of X-ray photon correlation spectroscopy to interrogate the segmental 7 dynamics of inverse WLM solutions swollen with a rubidium chloride solution. We observe a diffusive scaling of the dynamics and 8 extract a temperature-dependent diffusion coefficient, which we associate with the thermal interactions of the slow segmental 9 dynamics near entanglement points. Further, we probe this relaxation process across the unbranched to branched topological transition and 10 find no microstructural evidence of branch formation in the slow mode. Instead, we observe that the dynamics become more 11 homogeneous and prominent as the temperature is reduced and water content increases.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗