Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “down conversion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Laser energy conversion

Laser radiation could possibly provide a feasible approach for the transmission of energy between stations and vehicles in space and on earth. The transmitted energy could be used for the operational requirements of the receiving space station, lunar base, or spacecraft. In addition, laser energy could also be employed to provide power for the propulsion of vehicles in space. The present status of development regarding the various technological areas involved in an implementation of these objectives is examined, taking into account the possibility of further advances needed to satisfy the technical requirements. Attention is given to laser-induced chemistry for converting the radiation energy into chemical energy. Other subjects considered are related to photovoltaics, optical diodes, thermo-electronics, laser rockets, and photon engines.

Billman, K. W.↗

Graphic-to-digital conversion system

Computer-controlled system allows operator to record only those data points selected. It consists of commercially available X-Y plotter, computer, and A/D and D/A converters. New component is strain gage controller and amplifier which can be adapted to existing systems.

Rosenthal, F. L.↗

DC-to-DC conversion with voltage multipliers

Compact device uses transformerless capacitor/diode voltage multiplier. Advantages include efficiency at high power levels, increased reliability due to elimination of magnetics and associated electrical transients, no magnetic shielding requirement, and adaptability to modular or integrated circuit systems.

Harrigill, W. T., Jr.↗

Analog-to-binary conversion of video data

Accurate and controllable technique for converting television information to binary form has been developed for systems requiring video signals to be used with automatic data-processing equipment. High-speed comparator circuit ignores out-of-focus features and is insensitive to overall brightness changes in picture.

Acuna, M. H.↗

Energy conversion system

Scheme based on chemical decomposition and recombination converts energy collected at relatively low temperatures (300 C) to higher temperatures required for efficient operation of steam-driven electrical generators. Approach uses one or more cyclical reversible chemical reactions in which compound is made to decompose and absorb thermal energy at low temperature by shifting equilibrium.

Miller, C. G.↗

Integrated photovoltaic-thermal solar energy conversion systems

A combined photovoltaic/thermal collector has been built and is now being tested. Initial tests have concentrated on evaluating the thermal efficiency of the collector before and after the silicon cells are mounted. With likely improvements in bonding between cells and receiver and in the absorptivity of the cells, thermal efficiencies greater than 50% can be expected for the combined receiver operating at 100 C.

Samara, G. A.↗

Direct solar energy conversion for large scale terrestrial use

Various techniques to increase the open circuit voltage are being explored. It had been previously observed that cells made on CdS deposited from a single source gave a consistently higher V sub oc. Further tests have now shown that this effect may in fact relate to differences in source and substrate temperatures. The resulting differences in CdS structure and crystallinity are being documented. Deposits of mixed CdS and ZnS are being produced and will be initially made into cells using the conventional barriering technique. Analysis of I-V characteristics at temperatures between 25 and 110 C is being perfected to provide nondestructive analysis of the Cu2S. Changes due to vacuum heat treatments and exposure to oxygen are also being monitored by the same technique. Detailed spectral response measurements are being made.

Boeer, K. W.↗

Silicon Schottky photovoltaic diodes for solar energy conversion

Various factors in Schottky barrier solar cell fabrication are evaluated in order to improve understanding of the current flow mechanism and to isolate processing variables that improve efficiency. Results of finger design, substrate resistivity, surface finishing and activation energy studies are detailed. An increased fill factor was obtained by baking of the vacuum system to remove moisture.

Anderson, W. A.↗

Conversion of laser energy to chemical energy by the photoassisted electrolysis of water

Ultraviolet irradiation of the n-type semiconductor TiO2 crystal electrode of an aqueous electrochemical cell evolves O2 at the TiO2 electrode and H2 at the Pt electrode. The gases are typically evolved in a 2:1 (H2:O2) volume ratio. The photoassisted reaction seems to require applied voltages, but values as low as 0.25 V do allow the photoassisted electrolysis to proceed. Prolonged irradiation in either acid or base evolves the gaseous products in amounts which clearly demonstrate that the reaction is catalytic with respect to the TiO2. The wavelength response of the TiO2 and the correlation of product yield and current are reported. The results support the claim that TiO2 is a true photoassistance agent for the electrolysis of water. Minimum optical storage efficiencies of the order of 1 percent can be achieved by the production of H2.

Wrighton, M. S.↗

Thermo electronic laser energy conversion

The thermo electronic laser energy converter (TELEC) is described and compared to the Waymouth converter and the conventional thermionic converter. The electrical output characteristics and efficiency of TELEC operation are calculated for a variety of design variables. Calculations and results are briefly outlined. It is shown that the TELEC concept can potentially convert 25 to 50 percent of incident laser radiation into electric power at high power densities and high waste heat rejection temperatures.

Hansen, L. K.↗

Space-based solar power conversion and delivery systems (study), engineering analysis

A systems analysis of synchronous, orbit-based power generation and relay systems that could be operational in the 1990's is described along with a comparison with earth-based systems to be operational in the same time frame. Operational and economic requirements for the orbiting systems and near term research activities which will be required to assure feasibility, development, launch and operational capabilities of such systems in the post- 1990 time frame are examined.

Nathan, C. A.↗

NASA thermionic-conversion program

Current out-of-core emphases allow converter material and design freedoms previously prohibited by in-core nucleonic and geometric restrictions. As a result, potential improvements indicate possibilities for severalfold increases in efficiencies. The new TEC-ART program concentrated initially on low-work function collectors and interelectrode-loss reduction and revealed much in a short time. This new emission capability coupled with improved collectors that maintain performance with emitter-vapor deposit accumulations are requisites for efficient, enduring thermionic converters.

Morris, J. F.↗

Energy Conversion Alternatives Study (ECAS), Westinghouse phase 1. Volume 3: Combustors, furnaces and low-BTU gasifiers

Information is presented on the design, performance, operating characteristics, cost, and development status of coal preparation equipment, combustion equipment, furnaces, low-Btu gasification processes, low-temperature carbonization processes, desulfurization processes, and pollution particulate removal equipment. The information was compiled for use by the various cycle concept leaders in determining the performance, capital costs, energy costs, and natural resource requirements of each of their system configurations.

Hamm, J. R.↗

Energy Conversion Alternatives Study (ECAS), Westinghouse phase 1. Volume 4: Open recuperated and bottomed gas turbine cycles

Open-cycle recuperated gas turbine plant with inlet temperatures of 1255 to 1644 K (1800 to 2500 F) and recuperators with effectiveness values of 0, 70, 80 and 90% are considered. A 1644 K (2500 F) gas turbine would have a 33.5% plant efficiency in a simple cycle, 37.6% in a recuperated cycle and 47.6% when combined with a sulfur dioxide bottomer. The distillate burning recuperated plant was calculated to produce electricity at a cost of 8.19 mills/MJ (29.5 mills/kWh). Due to their low capital cost $170 to 200 $/kW, the open cycle gas turbine plant should see duty for peaking and intermediate load duty.

Amos, D. J.↗