Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “data shift”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Interchangeable Use of GNSS and Seismic Data for Rapid Earthquake Characterization: 2021 Chignik Earthquake, Alaska

Earthquake magnitude estimation using peak ground velocities (PGV) derived from 13 Global Navigation Satellite Systems (GNSS) data has shown promise for rapid 14 characterization of damaging earthquakes. Here we examine the feasibility of using 15 GNSS-derived velocity waveforms as interchangeable data for ground motion estimation 16 and other products that typically rely on strong-motion seismic records. Our study 17 compares PGVs derived from high-rate GNSS to those computed from high-rate seismic 18 records (strong-motion and velocity), at co- and closely-located stations. The recent 2021 Manuscript Click here to access/download;Manuscript;Manuscript_Final.docx 2 19 Mw 8.2 Chignik earthquake in Alaska that was recorded on co-located GNSS and strong20 motion sensors provides the perfect opportunity to compare the two data streams and 21 their application in rapid response. The Chignik velocity records appear almost identical 22 at co-located GNSS and strong-motion stations when observed at frequencies < 0.25 Hz. 23 GNSS and strong-motion derived velocity data are further employed to generate rapid 24 estimates of PGV-derived moment magnitudes for the earthquake. The moment 25 magnitude estimates from GNSS and joint GNSS/seismic data are within ~ ±0.4 26 magnitude units (Fang et al., 2020) of the final magnitude (Mw 8.2). ShakeMaps 27 generated for the 2021 Chignik earthquake using GNSS and seismic PGVs show notable 28 agreement between them, and show negligible shifts in PGV contours when co-/closely 29 located GNSS and seismic stations are substituted for one another. Therefore, we posit 30 that GNSS is a powerful alternative or addition to seismic data and vice versa.

Earthquake rapid response↗

A Data Mining Project to Identify Cardiovascular Related Factors That May Contribute to Changes in Visual Acuity Within the US Astronaut Corps

Many of the cardiovascular-related adaptations that occur in the microgravity environment are due, in part, to a well-characterized cephalad-fluid shift that is evidenced by facial edema and decreased lower limb circumference. It is believed that most of these alterations occur as a compensatory response necessary to maintain a "normal" blood pressure and cardiac output while in space. However, data from both flight and analog research suggest that in some instances these microgravity-induced alterations may contribute to cardiovascular-related pathologies. Most concerning is the potential relation between the vision disturbances experienced by some long duration crewmembers and changes in cerebral blood flow and intra-ocular pressure. The purpose of this project was to identify cardiovascular measures that may potentially distinguish individuals at risk for visual disturbances after long duration space flight. Toward this goal, we constructed a dataset from Medical Operation tilt/stand test evaluations pre- (days L-15-L-5) and immediate post-flight (day R+0) on 20 (3 females, 17 males). We restricted our evaluation to only crewmembers who participated in both shuttle and space station missions. Data analysis was performed using both descriptive and analytical methods (Stata 11.2, College Station, TX) and are presented as means +/- 95% CI. Crewmembers averaged 5207 (3447 - 8934) flight hours across both long (MIR-23 through Expedition16) and short (STS-27 through STS-101) duration missions between 1988 and 2008. The mean age of the crew at the time of their most recent shuttle flight was 41 (34-44) compared to 47 (40-54) years during their time on station. In order to focus our analysis (we did not have codes to separate out subjects by symptomotology) , we performed a visual inspection of each cardiovascular measures captured during testing and plotted them against stand time, pre- to post-flight, and between mission duration. It was found that pulse pressure most clearly differentiated the two mission types. Statistical analysis confirmed that pulse pressure was significantly higher before [45.6; (42.1 to 49.1)] and after [50.7; (46.9 to 54.6)] time on station compared with their most recent shuttle flight [31.6 (27.8 to 35.4), and 32.2 (28.3 to 36.0) respectively] even after correcting differences in age and cumulative number of mission hours. Without knowing the identity of which long duration crewmembers demonstrated visual changes, we were limited to examining whether certain crew regulate components of pulse pressure, systolic and diastolic blood pressure, differently due to microgravity exposure. To that end, we stratified crew into tertiles based on either their pre-flight measure of systolic or diastolic blood pressure. Those crew in the highest tertile for both systolic (lower tertile (n=8; 103-111), middle tertile (n=7; 113-121), and upper tertile (n=5; 125-136) and diastolic blood pressure (lower tertile (n=8; 58-64), middle tertile (n=7; 67-73), and upper tertile (n=5; 75-81) demonstrated less variability in pulse pressure between R+0 and L-10 (Figure 2). Interestingly, those crewmembers with the highest resting systolic blood pressure demonstrated either no change or in some instances an increase in total peripheral resistance, where those in the lower tertiles had lower values of total peripheral resistance compared to pre-flight levels. In this study, it was found that crewmembers in the highest tertile for both systolic and diastolic blood pressure demonstrated less variability in pulse pressure and that the decrease in variability was due in part to lower levels of compliance as indicated by similar or higher levels of total peripheral resistance after compared with before flight levels. Whether there is a relation between blood pressure regulation and total peripheral resistance in crew presenting with negative changes in visual acuity remains unknown.

Westby, Christian M.↗

Effects of Convective Transport of Solute and Impurities on Defect-Causing Kinetics Instabilities

For in-situ studies of the formation and evolution of step patterns during the growth of protein crystals, we have designed and assembled an experimental setup based on Michelson interferometry with the surface of the growing protein crystal as one of the reflective surfaces. The crystallization part of the device allows optical monitoring of a face of a crystal growing at temperature stable within 0.05 C in a developed solution flow of controlled direction and speed. The reference arm of the interferometer contains a liquid-crystal element that allows controlled shifts of the phase of the interferograms. We employ an image processing algorithm which combines five images with a pi/2 phase difference between each pair of images. The images are transferred to a computer by a camera capable of capturing 6-8 frames per second. The device allows data collection data regarding growth over a relatively large area (approximately .3 sq. mm) in-situ and in real time during growth. The estimated dept resolution of the phase shifting interferometry is about 100 A. The lateral resolution, depending on the zoom ratio, varies between 0.3 and 0.6 micrometers. We have now collected quantitative results on the onset, initial stages and development of instabilities in moving step trains on vicinal crystal surfaces at varying supersaturation, position on the facet, crystal size and temperature with the proteins ferritin, apoferritin and thaumatin. Comparisons with theory, especially with the AFM results on the molecular level processes, see below, allow tests of the rational for the effects of convective flows and, as a particular case, the lack thereof, on step bunching.

Vekilov, Peter G.↗

Effects of Resonance in Quasi-Periodic Oscillators of Neutron Star Binaries

Using a large quantity of Rossi X-Ray Timing Explorer data presented in the literature, I offer a detailed investigation into the accuracy of the quasi-periodic oscillation (QPO) frequency determination. The QPO phenomenon seen in X-ray binaries is possibly a result of the resonance of the intrinsic (eigen) oscillations and harmonic driving forces of the system. I show that the resonances, in the presence of the damping of oscillations, occur at frequencies that are systematically and randomly shifted with respect to the eigenfrequencies of the system. The shift value strongly depends on the damping rate that is measured by the half-width of the QPO feature. Taking into account this effect, I analyze the QPO data for four Z sources, Scorpius X-I, GX 340+0, GX 5-1, and GX 17+2, and two atoll sources, 4U 1728-34 and 4U 0614+09. The transition-layer model (TLM) predicts the existence of the invariant quantity delta, an inclination angle of the magnetospheric axis with respect to the normal to the disk. I calculate delta and the error bars of delta using the resonance shift, and I find that the inferred delta-values are consistent with constants for these four Z sources, in which horizontal-branch oscillation and kilohertz frequencies have been detected and correctly identified. It is shown that the inferred delta are in the range between 5.5 deg and 6.5 deg. I conclude that the TLM seems to be compatible with the data.

Titarchuk, Lev↗

Experimental investigation of a double-diffused MOS structure

Self-aligned polysilicon gate technology was applied to double-diffused MOS (DMOS) construction in a manner that retains processing simplicity and effectively eliminates parasitic overlap capacitance because of the self-aligning feature. Depletion mode load devices with the same dimensions as the DMOS transistors were integrated. The ratioless feature results in smaller dimension load devices, allowing for higher density integration with no increase in the processing complexity of standard MOS technology. A number of inverters connected as ring oscillators were used as a vehicle to test the performance and to verify the anticipated benefits. The propagation time-power dissipation product and process related parameters were measured and evaluated. This report includes (1) details of the process; (2) test data and design details for the DMOS transistor, the load device, the inverter, the ring oscillator, and a shift register with a novel tapered geometry for the output stages; and (3) an analytical treatment of the effect of the distributed silicon gate resistance and capacitance on the speed of DMOS transistors.

Lin, H. C.↗

A CW ultrasonic bolt-strain monitor

There exists a need for a relatively inexpensive system for measuring strain in bolts. The torque wrench is one technique for straining bolts which has been widely applied. Unfortunately, friction in the bolt threads and between the nut and the work tend to make such a simple system inaccurate. In practice, a torque wrench is unacceptable for many situations where strain is critical. In this article, an ultrasonic technique is described which can indicate changes in bolt strain to better than one part in 10,000. The technique is based on the one-dimensional propagating-ultrasonic-wave model and uses a new ultrasonic instrument called a Reflection Oscillator Ultrasonic Spectrometer which is a closed-loop feedback marginal-oscillator system that frequency locks the device to the peak of a mechanical resonance in the bolt. The instrument indicates a shift in the bolt resonance frequency due to elongation and changes in velocity of sound due to strain. Data are presented comparing a standard torque wrench to the ultrasonic monitor for different measured stresses on the bolt as well as for different bolt conditions. The strain instrument can be used to monitor changing stresses, to measure material properties and may be applied as a strain gage or load cell.

Heyman, J. S.↗

A determination of the orbit of GX 301-2

The pulse phase of GX 301-2(4U 1223-62) was tracked for 30 days with the SAS 3 satellite during 1979 January and February. It is suggested that most of the observed changes in pulse period are the result of Doppler shifts in a binary orbit, as opposed to changes in the intrinsic pulse period alone. The SAS 3 data allow orbital periods P(orb) equal to or greater than 23 days when a constant rate of change in the intrinsic pulse period is allowed as a free parameter in the orbital fits. For each trial orbital period the other orbital elements of the binary system are well determined. The SAS 3 data is combined with the Ariel 5 pulse arrival-time data to further restrict the allowed orbits. In both data sets a sharp minimum is observed in the Doppler delays of the pulse arrival times. Evidence is presented that the correct orbit is most likely the one with P(orb) = 35.0d, a projected semimajor axis for the neutron star of 304 light-seconds, and an eccentricity of 0.44. The relation of this system to the six X-ray binaries whose orbits have been determined previously is also discussed.

Kelley, R.↗

Modulation/demodulation techniques for satellite communications. Part 4: Appendices

The use of the Viterbi algorithm in a general context is examined. The generalized transfer function bounds are given which permit the following applications to be carried out: maximum likelihood demodulation of such bandwidth modulations as minimum-shift-keying and continuous phase frequency-shift-keying, demodulation of intersymbol interference and partial response signals, estimation and smoothing, and simultaneous phase synchronization, and data detection. Sufficient conditions are reviewed for tightening Chernoff and Rhattacharyya bounds.

Omura, J. K.↗

Binary Correlator for Electromagnetic Signal Patterns

Modulation patterns recognized with extensive calculations. Set of shift registers contains patterns of 1's and 0's representing presence or absence of received signal in designated time/frequency bins. Pattern in shift registers correlated with pattern of expected signal by shifting each cell to right according to expected pattern and summing shift-register outputs in analog summing network. Useful in applications requiring identification of smaller pattern of 1-bit data within larger matrix of such data.

Garrison, J. B.↗

Stress-relaxation and stress-strain behavior of poly(ethylene-co-vinylacetate) at varying crosslink density

The stress-relaxation modulus of an unfilled ethylene vinyl acetate polymer at three different degrees of crosslinking was measured at 15 temperatures over a temperature span of about 160 C. At each temperature, the time response was measured for at least three decades of time. From these data it was possible to construct a master curve for each degree of crosslinking. The time-temperature shift factors, alpha(T), were found to be related to temperature by the relation log alpha(T) = -A(T - 273), where the parameter A has an average value of 0.234 for the three materials.

Fedors, R. F.↗

Three-dimensional structure of the heliosphere as inferred from observations with a Japanese Halley spacecraft

A sinusoidal neutral line with a pair of giant regions appeared on the sun about one year before the launch of 'Sakigake', the first of two Japanese Comet Halley spacecraft. The Sakigake magnetometer data during the early part of the mission (February-March 1985) are well interpreted by an eastward shift of the tilting neutral sheet. The shift is further explained by an effect of a new giant region appearing at about 10 deg heliolatitude and about 50 deg Carrington longitude in August 1984. The toward polarity ratio of IMF observed by Sakigake changed from about 22 percent in February to about 62 percent in early June and then increased rapidly up to 98 percent. This ratio is interpreted as a decrease of the tilt angle of the sheet down to only about 4 deg. It is the first spacecraft observation of 'the disappearing sector structure' with such small tilt angle.

Saito, T.↗

Frequencies of low-degree solar acoustic oscillations and the phase of the solar cycle

A study of the solar total irradiance data of the Active Cavity Radiometer Irradiance Monitor on the SMM satellite shows a small but formally significant shift in the frequencies of solar acoustic (p-mode) oscillations between the epochs of maximum and minimum solar activity. Specifically, the mean frequency of the strongest p-mode resonances of low spherical-harmonic degree (l = 0-2) is approximately 1.3 parts in 10,000 higher in 1980, near the time of sunspot maximum, than at around 1985, near sunspot minimum. The observed frequency shift may be an 11-yr effect but the precise mechanism is not clear.

Woodard, Martin F.↗

A physical model for earthquakes. I - Fluctuations and interactions. II - Application to southern California

The idea that earthquakes represent a fluctuation about the long-term motion of plates is expressed mathematically through the fluctuation hypothesis, under which all physical quantities which pertain to the occurance of earthquakes are required to depend on the difference between the present state of slip on the fault and its long-term average. It is shown that under certain circumstances the model fault dynamics undergo a sudden transition from a spatially ordered, temporally disordered state to a spatially disordered, temporally ordered state, and that the latter stages are stable for long intervals of time. For long enough faults, the dynamics are evidently chaotic. The methods developed are then used to construct a detailed model for earthquake dynamics in southern California. The result is a set of slip-time histories for all the major faults, which are similar to data obtained by geological trenching studies. Although there is an element of periodicity to the events, the patterns shift, change and evolve with time. Time scales for pattern evolution seem to be of the order of a thousand years for average recurring intervals of about a hundred years.

Rundle, John B.↗

AVIRIS performance during the 1987 flight season: An AVIRIS project assessment and summary of the NASA-sponsored performance evaluation

Results are presented of the assessment of AVIRIS performance during the 1987 flight season by the AVIRIS project and the earth scientists who were chartered by NASA to conduct an independent data quality and sensor performance evaluation. The AVIRIS evaluation program began in late June 1987 with the sensor meeting most of its design requirements except for signal-to-noise ratio in the fourth spectrometer, which was about half of the required level. Several events related to parts failures and design flaws further reduced sensor performance over the flight season. Substantial agreement was found between the assessments by the project and the independent investigators of the effects of these various factors. A summary of the engineering work that is being done to raise AVIRIS performance to its required level is given. In spite of degrading data quality over the flight season, several exciting scientific results were obtained from the data. These include the mapping of the spatial variation of atmospheric precipitable water, detection of environmentally-induced shifts in the spectral red edge of stressed vegetation, detection of spectral features related to pigment, leaf water and ligno-cellulose absorptions in plants, and the identification of many diagnostic mineral absorption features in a variety of geological settings.

Vane, Gregg↗

Advanced technology satellite demodulator development

Ford Aerospace has developed a proof-of-concept satellite 8 phase shift keying (PSK) modulation and coding system operating in the Time Division Multiple Access (TDMA) mode at a data range of 200 Mbps using rate 5/6 forward error correction coding. The 80 Msps 8 PSK modem was developed in a mostly digital form and is amenable to an ASIC realization in the next phase of development. The codec was developed as a paper design only. The power efficiency goal was to be within 2 dB of theoretical at a bit error rate (BER) of 5x10(exp 7) while the measured implementation loss was 4.5 dB. The bandwidth efficiency goal was 2 bits/sec/Hz while the realized bandwidth efficiency was 1.8 bits/sec/Hz. The burst format used a preamble of only 40 8 PSK symbol times including 32 symbols of all zeros and an eight symbol unique word. The modem and associated special test equipment (STE) were fabricated mostly on a specially designed stitch-weld board although a few of the highest rate circuits were built on printed circuit cards. All the digital circuits were ECL to support the clock rates of from 80 MHz to 360 MHz. The transmitter and receiver matched filters were square-root Nyquist bandpass filters realized at the 3.37 GHz i.f. The modem operated as a coherent system although no analog phase locked (PLL) loop was employed. Within the budgetary constraints of the program, the approach to the demodulator has been proven and is eligible to proceed to the next phase of development of a satellite demodulator engineering model. This would entail the development of an ASIC version of the digital portion of the demodulator, and MMIC version of the quadrature detector, and SAW Nyquist filters to realize the bandwidth efficiency.

Ames, Stephen A.↗

Phase ambiguity resolution for offset QPSK modulation systems

A demodulator for Offset Quaternary Phase Shift Keyed (OQPSK) signals modulated with two words resolves eight possible combinations of phase ambiguity which may produce data error by first processing received I(sub R) and Q(sub R) data in an integrated carrier loop/symbol synchronizer using a digital Costas loop with matched filters for correcting four of eight possible phase lock errors, and then the remaining four using a phase ambiguity resolver which detects the words to not only reverse the received I(sub R) and Q(sub R) data channels, but to also invert (complement) the I(sub R) and/or Q(sub R) data, or to at least complement the I(sub R) and Q(sub R) data for systems using nontransparent codes that do not have rotation direction ambiguity.

Nguyen, Tien M.↗

Optimal extraction of quasar Lyman limit absorption systems from the IUE archive

The IUE archive contains a wealth of information on Lyman limit absorption systems (LLS) in quasar spectra. QSO spectra from the IUE data base were optimally extracted, coadded, and analyzed to yield a homogeneous samples of LLS at low red shifts. This sample comprise 36 LLS, twice the number previously analyzed low z samples. These systems are ideal for the determination of the origin, redshift evolution, ionization, velocity dispersions and the metal abundances of absorption systems. Two of them are also excellent targets for the primordial Deuterium to Hydrogen ratio.

Tytler, David↗

A Historical Perspective on Dynamics Testing at the Langley Research Center

The history of structural dynamics testing research over the past four decades at the Langley Research Center of the National Aeronautics and Space Administration is reviewed. Beginning in the early sixties, Langley investigated several scale model and full-scale spacecraft including the NIMBUS and various concepts for Apollo and Viking landers. Langley engineers pioneered the use of scaled models to study the dynamics of launch vehicles including Saturn I, Saturn V, and Titan III. In the seventies, work emphasized the Space Shuttle and advanced test and data analysis methods. In the eighties, the possibility of delivering large structures to orbit by the Space Shuttle shifted focus towards understanding the interaction of flexible space structures with attitude control systems. Although Langley has maintained a tradition of laboratory-based research, some flight experiments were supported. This review emphasizes work that, in some way, advanced the state of knowledge at the time.

Horta, Lucas G.↗