Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cycles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Life Cycle Greenhouse Gas Emissions of Utility-Scale Wind Power: Systematic Review and Harmonization

A systematic review and harmonization of life cycle assessment (LCA) literature of utility-scale wind power systems was performed to determine the causes of and, where possible, reduce variability in estimates of life cycle greenhouse gas (GHG) emissions. Screening of approximately 240 LCAs of onshore and offshore systems yielded 72 references meeting minimum thresholds for quality, transparency, and relevance. Of those, 49 references provided 126 estimates of life cycle GHG emissions. Published estimates ranged from 1.7 to 81 grams CO{sub 2}-equivalent per kilowatt-hour (g CO{sub 2}-eq/kWh), with median and interquartile range (IQR) both at 12 g CO{sub 2}-eq/kWh. After adjusting the published estimates to use consistent gross system boundaries and values for several important system parameters, the total range was reduced by 47% to 3.0 to 45 g CO{sub 2}-eq/kWh and the IQR was reduced by 14% to 10 g CO{sub 2}-eq/kWh, while the median remained relatively constant (11 g CO{sub 2}-eq/kWh). Harmonization of capacity factor resulted in the largest reduction in variability in life cycle GHG emission estimates. This study concludes that the large number of previously published life cycle GHG emission estimates of wind power systems and their tight distribution suggest that new process-based LCAs of similar wind turbine technologies are unlikely to differ greatly. However, additional consequential LCAs would enhance the understanding of true life cycle GHG emissions of wind power (e.g., changes to other generators operations when wind electricity is added to the grid), although even those are unlikely to fundamentally change the comparison of wind to other electricity generation sources.

17 WIND ENERGY↗

The FIT 2.0 Model - Fuel-cycle Integration and Tradeoffs

All mass streams from fuel separation and fabrication are products that must meet some set of product criteria – fuel feedstock impurity limits, waste acceptance criteria (WAC), material storage (if any), or recycle material purity requirements such as zirconium for cladding or lanthanides for industrial use. These must be considered in a systematic and comprehensive way. The FIT model and the “system losses study” team that developed it [Shropshire2009, Piet2010b] are steps by the Fuel Cycle Technology program toward an analysis that accounts for the requirements and capabilities of each fuel cycle component, as well as major material flows within an integrated fuel cycle. This will help the program identify near-term R&D needs and set longer-term goals. This report describes FIT 2, an update of the original FIT model.[Piet2010c] FIT is a method to analyze different fuel cycles; in particular, to determine how changes in one part of a fuel cycle (say, fuel burnup, cooling, or separation efficiencies) chemically affect other parts of the fuel cycle. FIT provides the following: Rough estimate of physics and mass balance feasibility of combinations of technologies. If feasibility is an issue, it provides an estimate of how performance would have to change to achieve feasibility. Estimate of impurities in fuel and impurities in waste as function of separation performance, fuel fabrication, reactor, uranium source, etc.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Advanced Fuel Cycle Cost Basis – 2017 Edition

This report, commissioned by the U.S. Department of Energy (DOE) Office of Nuclear Energy (NE), provides a comprehensive set of cost data supporting a cost analysis for the relative economic comparison of options for use in the DOE Nuclear Technology Research and Development (NTRD) Program (previously the Fuel Cycle Research and Development (FCRD) and the Advanced Fuel Cycle Initiative (AFCI)). The report describes the NTRD cost basis development process, reference information on NTRD cost modules, a procedure for estimating fuel cycle costs, economic evaluation guidelines, and a discussion on the integration of cost data into economic computer models. This report contains reference cost data for numerous fuel cycle cost modules (modules A-O) as well as cost modules for a number of reactor types (R modules). The fuel cycle cost modules were developed in the areas of natural uranium mining and milling, thorium mining and milling, conversion, enrichment, depleted uranium disposition, fuel fabrication, interim spent fuel storage, reprocessing, waste conditioning, spent nuclear fuel (SNF) packaging, long-term monitored retrievable storage, managed decay storage, recycled product storage, near surface disposal of low-level waste (LLW), geologic repository and other disposal concepts, and transportation processes for nuclear fuel, LLW, SNF, transuranic, and high-level waste. Since its inception, this report has been periodically updated. The last such internal document was published in August 2015 while the last external edition was published in December of 2009 as INL/EXT-07-12107 and is available on the Web at URL: www.inl.gov/technicalpublications/Documents/4536700.pdf. This current report (Sept 2017) is planned to be reviewed for external release, at which time it will replace the 2009 report as an external publication. This information is used in the ongoing evaluation of nuclear fuel cycles by the NE NTRD program.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Dynamic Simulations of Advanced Fuel Cycles

Years of performing dynamic simulations of advanced nuclear fuel cycle options provide insights into how they could work and how one might transition from the current once-through fuel cycle. This paper summarizes those insights from the context of the 2005 objectives and goals of the U.S. Advanced Fuel Cycle Initiative (AFCI). Our intent is not to compare options, assess options versus those objectives and goals, nor recommend changes to those objectives and goals. Rather, we organize what we have learned from dynamic simulations in the context of the AFCI objectives for waste management, proliferation resistance, uranium utilization, and economics. Thus, we do not merely describe “lessons learned” from dynamic simulations but attempt to answer the “so what” question by using this context. The analyses have been performed using the Verifiable Fuel Cycle Simulation of Nuclear Fuel Cycle Dynamics (VISION). We observe that the 2005 objectives and goals do not address many of the inherently dynamic discriminators among advanced fuel cycle options and transitions thereof.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Photovoltaics: Life-cycle Analyses

Life-cycle analysis is an invaluable tool for investigating the environmental profile of a product or technology from cradle to grave. Such life-cycle analyses of energy technologies are essential, especially as material and energy flows are often interwoven, and divergent emissions into the environment may occur at different life-cycle-stages. This approach is well exemplified by our description of material and energy flows in four commercial PV technologies, i.e., mono-crystalline silicon, multi-crystalline silicon, ribbon-silicon, and cadmium telluride. The same life-cycle approach is applied to the balance of system that supports flat, fixed PV modules during operation. We also discuss the life-cycle environmental metrics for a concentration PV system with a tracker and lenses to capture more sunlight per cell area than the flat, fixed system but requires large auxiliary components. Select life-cycle risk indicators for PV, i.e., fatalities, injures, and maximum consequences are evaluated in a comparative context with other electricity-generation pathways.

14 SOLAR ENERGY↗

Lessons Learned From Dynamic Simulations of Advanced Fuel Cycles

Years of performing dynamic simulations of advanced nuclear fuel cycle options provide insights into how they could work and how one might transition from the current once-through fuel cycle. This paper summarizes those insights from the context of the 2005 objectives and goals of the Advanced Fuel Cycle Initiative (AFCI). Our intent is not to compare options, assess options versus those objectives and goals, nor recommend changes to those objectives and goals. Rather, we organize what we have learned from dynamic simulations in the context of the AFCI objectives for waste management, proliferation resistance, uranium utilization, and economics. Thus, we do not merely describe “lessons learned” from dynamic simulations but attempt to answer the “so what” question by using this context. The analyses have been performed using the Verifiable Fuel Cycle Simulation of Nuclear Fuel Cycle Dynamics (VISION). We observe that the 2005 objectives and goals do not address many of the inherently dynamic discriminators among advanced fuel cycle options and transitions thereof.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Using Systems Analysis to Guide Fuel Cycle Development

Systems Analysis is an important tool for guiding the development of an advanced fuel cycle. The process of nuclear research, development, and demonstration takes a relatively long time, and can require a significant amount of expensive testing. It is beneficial to minimize the amount of testing required, and systems analysis should be used as one of the first steps in downselecting technologies and streamlining the requirements. This paper discusses the application of systems analysis to advanced fuel cycle development, including using it is a tool for initial investigation of sets of technology options, as well for planning timelines for testing and downselection amongst sets of technology options. The use of Technology Readiness Levels (TRLs) in fuel cycle development is explained, together with the connection between TRLs and systems analysis via requirements development. TRLs applied to transmutation fuel development is used as an example; transmutation fuel development, including testing and qualification, is generally considered to be the most time-intensive process, from a technical point of view, in fuel cycle development, and can be the deciding factor in determining the shortest time possible for implementing an advanced fuel cycle. Using systems analysis to inform technology readiness levels provides a disciplined and informed process for advanced fuel cycle development.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A W-Geometry Ortho-TOF MS with High Resolution and Up to 100% Duty Cycle for MS/MS

Orthogonal injection time-of-flight (orthoTOF) mass spectrometry (MS) is the most prevalent form of TOFMS, owing to its greater control over incoming ion energy, the ability to correct for aberrations in incoming ion velocity and position, and its ability to provide an entire mass spectrum within a single scan. However, the duty cycle of orthoTOFMS is low compared with scanning analyzers, which can have 100% duty cycle when measuring a single type of ion. Typical duty cycles for orthoTOFMS range from 1% to 30%, depending on instrument geometry. Generally, as instrument resolution increases, duty cycle decreases. Additionally, the greatest duty cycle is achieved for the highest m/z ion recorded in the spectrum, and decreases for all other ions as a function of m/z. In a prior publication [Loboda, A.V.; Chernushevich, I.V. J. Am. Soc. Mass Spectrom. 20, 1342–1348 (20)], a novel trapping/release method for restoring the duty cycle of a V-geometry orthoTOFMS to near 100% (referred to as “Zeno pulsing”) was presented. Here, we apply that method to a W-TOF geometry analyzer with analog detection. Across a m/z range of 100–2000, sensitivity gains of ~5–20 are observed, for total ion currents approaching ~10{sup 7} ions·s{sup −1}. Zeno pulsing, or similar strategies for restoring duty cycle, will continue to be important as instrument resolution in orthoTOFMS is increased through the use of ion mirrors. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Long noncoding RNA LOXL1-AS1 regulates prostate cancer cell proliferation and cell cycle progression through miR-541-3p and CCND1

Highlights: • LOXL1-AS1 regulates proliferation and cell cycle in prostate cancer cells. • miR-541-3p regulates CCND1 expression in prostate cancer cells. • LOXL1-AS1 sponges and regulates the expression of miR-541-3p. • LOXL1-AS1 regulates proliferation and cell cycle through miR-541-3p and CCND1. Prostate cancer is one of the most frequent malignancies affecting men. Long non-coding RNAs (lncRNAs) are involved in the pathogenesis of prostate cancer. LncRNA LOXL1-AS1 participates in the pathogenesis of the exfoliation syndrome. However, the role of LOXL1-AS1 in cancer remains largely unknown. Here, we found that LOXL1-AS1 down-regulation inhibited prostate cancer cell proliferation and cell cycle progression. RNA sequencing analysis revealed that it regulates the expression of cell cycle-related genes. LOXL1-AS1 is predominantly distributed in the cytoplasm, where it interacts with miR-541-3p. In addition, miR-541-3p targets the cell cycle regulator CCND1 in prostate cancer cells. LOXL1-AS1 down-regulation inhibits the expression of CCND1 and cell cycle progression, whereas these effects are abolished upon miR-541-3p suppression. In summary, our study revealed that LOXL1-AS1 regulates prostate cancer cell proliferation and cell cycle progression through miR-541-3p and CCND1. Modulation of their levels may be used to treat prostate cancer.

60 APPLIED LIFE SCIENCES↗

Solar hydrogen production using Ce{sub 1-x}Li{sub x}O{sub 2-{delta}} solid solutions via a thermochemical, two-step water-splitting cycle

The reactivity of Ce{sub 1-x}Li{sub x}O{sub 2-{delta}} (x=0.025, 0.05, 0.075 and 0.1) solid solutions during the redox and two-step water-splitting cycles has been investigated in this work. Thermogravimetric analysis (TGA), X-ray diffraction (XRD) patterns and field-emission scanning electron microscopy (FE-SEM) indicate that there are two reaction mechanisms in the O{sub 2}-releasing step and the shift in the reaction mechanisms occurs in the O{sub 2}-releasing step because of sintering at high temperatures, and a decrease in the concentration of lattice oxygen occurs as the O{sub 2}-releasing step proceeds. The reaction in the O{sub 2}-releasing step follows a second-order mechanism over a temperature range of 1000-1170 Degree-Sign C and a contracting-area model over a temperature range of 1170-1500 Degree-Sign C. According to direct gas mass spectroscopy (DGMS), ceria doped at 5 mol% Li exhibits the highest reactivity in the O{sub 2}-releasing step during both redox cycles in air and two-step water-splitting cycles, whereas ceria doped at 2.5 mol% Li yields the highest amount of hydrogen (4.79 ml/g) in the H{sub 2}-generation step during the two-step water-splitting cycles, which is higher than ceria doped with other metals. DGMS and electrochemical impedance spectroscopy (EIS) suggest that the average reaction rate in the H{sub 2}-generation step is influenced by the concentration of extrinsic oxygen vacancies, and thus, the reactivity in the H{sub 2}-generation step, to some degree, could be tuned by varying the concentration of extrinsic oxygen vacancies (Li content). - Graphical abstract: Average reduction fraction of Ce{sub 1-x}Li{sub x}O{sub 2-{delta}} (x=0.025, 0.05, 0.075 and 0.10) solid solutions versus Li content in the O{sub 2}-releasing step during the redox cycles in air and the two-step water-splitting cycles. Highlights: Black-Right-Pointing-Pointer We have investigated Li-doped ceria for hydrogen production using two-step water-splitting cycles. Black-Right-Pointing-Pointer The sintering effect on the reaction mechanisms was first clarified. Black-Right-Pointing-Pointer The shift of reaction mechanisms occurs during the O{sub 2}-releasing step. Black-Right-Pointing-Pointer The reaction-mechanism shift occurs because of sintering at high temperatures. Black-Right-Pointing-Pointer Doping at 2.5 mol% Li results in the highest H{sub 2} yield and cyclability for hydrogen production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultrahigh coulombic efficiency electrolyte enables Li||SPAN batteries with superior cycling performance

Raising the coulombic efficiency of lithium metal anode cycling is the deciding step in realizing long-life rechargeable lithium batteries. Here, we designed a highly concentrated salt/ether electrolyte diluted in a fluorinated ether: 1.8 M LiFSI in DEE/BTFE (diethyl ether/bis(2,2,2-trifluoroethyl)ether), which realized an average coulombic efficiency of 99.37% at 0.5 mA cm -2 and 1 mAh cm -2 for more than 900 cycles. This electrolyte also maintained a record coulombic efficiency of 98.7% at 10 mA cm -2 , indicative of its ability to provide fast-charging with high cathode loadings. Morphological studies reveal dense, dendrite free Li depositions after prolonged cycling, while surface analyses confirmed the formation of a robust LiF-rich SEI layer on the cycled Li surface. Moreover, we discovered that this ether-based electrolyte is highly compatible with the low-cost, high-capacity SPAN (Sulfurized polyacrylonitrile) cathode, where the constructed Li||SPAN cell exhibited reversible cathode capacity of 579 mAh g -1 and no capacity decay after 1200 cycles. A cell where a high areal loading SPAN electrode (>3.5 mAh cm -2 ) is paired with only onefold excess Li was constructed and cycled at 1.75 mA cm -2 , maintaining a coulombic efficiency of 99.30% for the lithium metal. Computational simulations revealed that at saturation, the Li-FSI complex forms contact ion pairs, with a first solvation shell comprising DEE molecules, and a second solvation shell with a mix of DEE/BTFE. This study provides a path to enable high energy density Li||SPAN batteries with stable cycling.

36 MATERIALS SCIENCE↗

An Ordered P2/P3 Composite Layered Oxide Cathode with Long Cycle Life in Sodium-Ion Batteries

Developing stable cathode materials represents a crucial step toward long-life sodium-ion batteries. P2-type layered oxides are important as cathodes for their reversibility, but their long-term performance in full cells remains a key challenge. Herein, we report Na 0.75 Co 0.125 Cu 0.125 Fe 0.125 Ni 0.125 Mn 0.5 O 2 with an intergrowth of ordered P2 and P3 phases, studied by neutron diffraction and Rietveld refinement. A stable electrochemical performance is achieved in Na half cells with 100% capacity retention at a rate of C/10 after 100 cycles (initial capacity of 90 mAh/g), 96% capacity retention at a rate of 1 C after 500 cycles (initial capacity of 70 mAh/g), and 85% capacity retention at a rate of 5 C after 1000 cycles (initial capacity of 55 mAh/g). Stable full cell performance is achieved with 84.2% capacity retention after 1000 cycles at a rate of 1 C. Synchrotron X-ray diffraction, spectroscopy, and imaging are applied to elucidate the relationship between chemical/structural evolution and battery performance. A reversible local and global structural evolution is observed during initial cycles. Meanwhile, the challenges with enabling prolonged cycling (beyond 1000 cycles) may be associated with Fe dissolution and formation of a copper oxide phase. This study implies that cathodes with complex chemical and structural formations may stabilize electrochemical performance and highlights the importance of decoupling the contribution of each transition metal to performance degradation.

25 ENERGY STORAGE↗

Long-term behavior of CaO-based pellets supported by calcium aluminate cements in a long series of CO{sub 2} capture cycles

A series of carbonation/calcination tests consisting of 1000 cycles was performed with CaO-based pellets prepared using hydrated lime and calcium aluminate cement. The change in CO{sub 2} carrying capacity of the sorbent was investigated in a thermogravimetric analyzer (TGA) apparatus and the morphology of residues after those cycles in the TGA was examined by scanning electron microscopy (SEM). Larger quantities of sorbent pellets underwent 300 carbonation/calcination cycles in a tube furnace (TF), and their properties were examined by nitrogen physisorption tests (BET and BJH). The crushing strength of the pellets before and after the CO{sub 2} cycles was determined by means of a custom-made strength testing apparatus. The results showed high CO{sub 2} carrying capacity in long series of cycles with an extremely high residual activity of the order of 28%. This superior performance is a result of favorable morphology due to the existence of large numbers of nanosized pores suitable for carbonation. This morphology is relatively stable during cycles due to the presence of mayenite (Ca{sub 12}Al{sub 14}O{sub 33}) in the CaO structure. However, the crushing tests showed that pellets lost strength after 300 carbonation/calcination cycles, and this appears to be due to the cracks formed in the pellets. This effect was not observed in smaller particles suitable for use in fluidized bed (FBC) systems.

01 COAL, LIGNITE, AND PEAT↗

Quantifying Carbon Cycle Extremes and Attributing Their Causes Under Climate and Land Use and Land Cover Change From 1850 to 2300

The increasing atmospheric carbon dioxide (CO 2 ) mole fraction affects global climate through radiative (trapping longwave radiation) and physiological effects (reduction of plant transpiration). We use the simulations of the Community Earth System Model (CESM1-BGC) forced with Representative Concentration Pathway 8.5 to investigate climate-vegetation feedbacks from 1850 to the year 2300. Human-induced land use and land cover change (LULCC), through biogeochemical and biogeophysical processes, alter the climate and modify photosynthetic activity. The changing characteristics of extreme anomalies in photosynthesis, referred to as carbon cycle extremes, increase the uncertainty of terrestrial ecosystems to act as a net carbon sink. However, the role of LULCC in altering carbon cycle extremes under business-as-usual (continuously rising) CO 2 emissions is unknown. Here we show that LULCC magnifies the intensity, frequency, and extent of carbon cycle extremes, resulting in a net reduction in expected photosynthetic activity in the future. We found that large temporally contiguous negative carbon cycle extremes are due to a persistent decrease in soil moisture, which is triggered by declines in precipitation. With LULCC and global warming, vegetation exhibits increased vulnerability to hot and dry environmental conditions, increasing the frequency of fire events and resulting in considerable losses in photosynthetic activity. While most regions show strengthening of negative carbon cycle extremes, a few locations show a weakening effect driven by declining vegetation cover or benign climate conditions for photosynthesis. Increasing hot, dry, and fire-driven carbon cycle extremes are essential for improving carbon cycle modeling and estimation of ecosystem responses to LULCC and rising CO 2 mole fractions. Moreover, large aberrations in vegetation productivity represent potential and growing threats to human lives, wildlife, and food security.

54 ENVIRONMENTAL SCIENCES↗

Realistic Precipitation Diurnal Cycle in Global Convection-Permitting Models by Resolving Mesoscale Convective Systems

Accurately representing the precipitation diurnal cycle has long been a challenge for global climate models (GCMs). Here we evaluate the precipitation diurnal cycle in the DYAMOND global convection-permitting models (CPMs) and CMIP6 HighResMIP models. Comparison of the high- (25–50 km) and low-resolution (100–250 km) models with parameterized convection in HighResMIP shows that simply increasing model resolution does not noticeably improve the precipitation diurnal cycle. In contrast, CPMs can better capture the observed amplitude and timing of precipitation diurnal cycle. However, the simulated spatial variation of timing in CPMs is smaller than observed, leading to an exaggeration of the spatially averaged diurnal amplitude. The better-simulated precipitation diurnal cycle in the CPMs is tied to mesoscale convective systems (MCSs), which contribute about half of the total precipitation. The observed life cycle of MCSs, including initiation and mature stages, is well captured in the CPMs, leading to a more realistic precipitation diurnal cycle.

54 ENVIRONMENTAL SCIENCES↗

TOWARD A MAGNETOHYDRODYNAMIC THEORY OF THE STATIONARY ACCRETION SHOCK INSTABILITY: TOY MODEL OF THE ADVECTIVE-ACOUSTIC CYCLE IN A MAGNETIZED FLOW

The effect of a magnetic field on the linear phase of the advective-acoustic instability is investigated as a first step toward a magnetohydrodynamic (MHD) theory of the stationary accretion shock instability taking place during stellar core collapse. We study a toy model where the flow behind a planar stationary accretion shock is adiabatically decelerated by an external potential. Two magnetic field geometries are considered: parallel or perpendicular to the shock. The entropy-vorticity wave, which is simply advected in the unmagnetized limit, separates into five different waves: the entropy perturbations are advected, while the vorticity can propagate along the field lines through two Alfven waves and two slow magnetosonic waves. The two cycles existing in the unmagnetized limit, advective-acoustic and purely acoustic, are replaced by up to six distinct MHD cycles. The phase differences among the cycles play an important role in determining the total cycle efficiency and hence the growth rate. Oscillations in the growth rate as a function of the magnetic field strength are due to this varying phase shift. A vertical magnetic field hardly affects the cycle efficiency in the regime of super-Alfvenic accretion that is considered. In contrast, we find that a horizontal magnetic field strongly increases the efficiencies of the vorticity cycles that bend the field lines, resulting in a significant increase of the growth rate if the different cycles are in phase. These magnetic effects are significant for large-scale modes if the Alfven velocity is a sizable fraction of the flow velocity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simulating evaporative wet and dry cycles in Gale crater, Mars using thermochemical modeling techniques

The aim of this work is to provide a model‐backed hypothesis for the formation of evaporites—sulfates, borates—in Gale crater using thermochemical modeling to determine constraints on their formation. We test the hypothesis that primary evaporites required multiple wet–dry cycles to form, akin to how evaporite assemblages form on Earth. Starting with a basalt‐equilibrated Mars fluid, Mars‐relevant concentrations of B and Li were added, and then equilibrated with Gale lacustrine bedrock. We simulated the cycles of evaporation followed by groundwater recharge/dilution to establish an approximate minimum number of wet–dry cycles required to form primary evaporites. We determine that a minimum of 250 wet–dry cycles may be required to start forming primary evaporites that consist of borates and Ca‐sulfates. We estimate that ~14,250 annual cycles (~25.6 k Earth years) of wet and dry periods may form primary borates and Ca‐sulfates in Gale crater. These primary evaporites could have been remobilized during secondary diagenesis to form the veins that the Curiosity rover observes in Gale crater. No Li salts form after 14,250 cycles modeled for the Gale‐relevant scenario (approximately 10 6 cycles would be needed) which implies Li may be leftover in a groundwater brine after the time of the lake. No major deposits of borates are observed to date in Gale crater which also implies that B may be leftover in the subsequent groundwater brine that formed after evaporites were remobilized into Ca‐sulfate veins.

58 GEOSCIENCES↗

TU-G-BRA-07: Characterization of Tumor Proliferation During Successive Cycles of Anti-Angiogenic Therapy Using [F-18]FLT PET/CT

Purpose: Studies have shown cessation of anti-angiogenic treatment during the first cycle of therapy resulted in rebound of tumor proliferation (flare). This study characterized proliferation dynamics during the first and third cycle of anti-angiogenic treatment using [F-18]FLT PET. Methods: Thirteen patients with various solid cancers were treated with Axitinib (Pfizer, Inc) at a dose of 5mg orally, twice daily, on contiguous three-week cycles with intermittent dosing (two-weeks-on/one-week-off). All patients received three FLT PET/CT scans during cycle 1 (C1): at baseline (C1D0), peak Axitinib concentration (C1D14), and the end of washout (C1D21). Ten patients received up to an additional three scans at corresponding time points during cycle 3 (C3). Lesions were identified by a nuclear medicine physician and manually contoured. Tumor burden was quantified using standard SUV metrics. Correlations between imaging metrics across C1 and C3 were calculated using the Spearman correlation. Results: At C1 peak drug concentration 11/13 patients had decreases in SUVtotal, with median decrease of 50% (change from C1D0 to C1D14). At C3 peak drug concentration 7/7 patients had decreases in SUVtotal, with median decrease of 20% (C3D0 to C3D14). Proliferative flare during C1 washout (>20% increase from C1D14 to C1D21) occurred in 9/13 patients, with median SUVtotal increase of 190%. Flare was also seen in C3 for 5/5 patients, with median SUVtotal increase of 70% (change from C3D14 to C3D21). Correlations were found between changes in imaging metrics across C1 and C3, notably the change in SUVtotal from C1D0 to C1D21 and the change in SUVtotal from C1D0 to C3D0 (ρ = 0.80). Conclusion: Measurements of SUVtotal showed that both patient response to treatment and flare were evident in both cycles of treatment. Correlation between changes in SUVtotal across C1 and C3 suggest early time points could be used to characterize patient response in later cycles. Research funded in part by Pfizer.

60 APPLIED LIFE SCIENCES↗