Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “crystallographic structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Mechanisms for long carrier lifetime in Cd(Se)Te double heterostructures

II–VI semiconductors are used in numerous electro-optical applications. For example, CdTe-based solar technology is cost competitive with other electricity generation sources, yet there is still significant room to improve. Carrier lifetime has historically been well below the radiative recombination limit. Lifetimes reaching beyond 100 ns can significantly enhance performance and enable novel device structures. Here, double heterostructures (DHs) with passivated interfaces demonstrate lifetimes exceeding 1 µs, yet this appears only for CdSeTe and not for CdTe DHs. We compare the passivation mechanisms in CdTe and CdSeTe DHs. CdSeTe lifetimes on the order of 1 µs correspond to a combination of superior intragrain lifetime, extremely low grain boundary recombination and greater Te4+ interfacial presence compared to CdTe.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Quantifying the dislocation content of atomically resolved grain boundary line defects using the Nye tensor

The Nye tensor, which quantifies the density of Burgers vector for a given dislocation line direction, can be effectively used to characterize dislocation content in bulk crystals from atomic-resolution transmission electron microscopy images. The Nye tensor can be calculated from these images, in part because the reference state is simply defined by the lattice of the perfect crystal. The application of the Nye tensor to interfacial line defects, for which the natural reference state is the dichromatic pattern of the two grains in their reference orientation, poses additional challenges. In this work, we present a method that employs the Nye tensor to characterize the edge dislocation content of line defects at grain boundaries from atomic-resolution images. This approach enables us to rapidly characterize all edge dislocation content along a grain boundary. Additionally, the Nye tensor provides information about line defect core structure. Finally, we demonstrate this method on two exemplar defects: a twin boundary disconnection and a facet junction in face-centered cubic Au.

Crystallographic defects↗
DOE OSTI2020

Operando Tailoring of Defects and Strains in Corrugated β-Ni(OH) 2 Nanosheets for Stable and High-Rate Energy Storage

Nickel hydroxide represents a technologically important material for energy storage, such as hybrid supercapacitors. It has two different crystallographic polymorphs, α- and β-Ni(OH) 2 , showing advantages in either theoretical capacity or cycling/rate performance, manifesting a trade-off trend that needs to be optimized for practical applications. In this work, the synergistic superiorities in both activity and stability of corrugated β-Ni(OH) 2 nanosheets are demonstrated through an electrochemical abuse approach. With ≈91% capacity retention after 10 000 cycles, the corrugated β-Ni(OH) 2 nanosheets can deliver a gravimetric capacity of 457 C g -1 at a high current density of 30 A g -1 , which is nearly two and four times that of the regular α- and β-Ni(OH) 2 , respectively. Operando spectroscopy and finite element analysis reveal that greatly enhanced chemical activity and structural robustness can be attributed to the in situ tailored lattice defects and the strain-induced highly curved micromorphology. This work demonstrates a multi-scale defect-and-strain co-design strategy, which is helpful for rational design and tuned fabrication of next-generation electrode materials for stable and high-rate energy storage.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Quantitative characterization of gradient microstructures: A study on friction stir spot processing of pure cobalt

Heterogeneous microstructures in polycrystalline metals can enhance the strength and ductility, outperforming homogeneous structures of similar composition. This study investigates deformed cobalt via friction stir spot processing with varying dwell times to uncover the effects of plastic deformation and heat generation on the formation of morphological, phase, and grain boundary character gradients. A new approach to quantify the morphological gradients in materials, which describes grain morphology in terms of density followed by parametric regression, enables direct quantification of processing depth and gradient sharpness. Results show that longer processing times increase the steepness of morphological gradients and reduce the deformation depth for friction stir spot processing with low plunge depths and high tool rotational speeds. The amount of retained FCC is increased in the shorter processing conditions, primarily due to refined grain size, increased defect content, and reduced heat generation. Crystallographic texture analysis of the HCP phase indicated a dominant B-fiber described by (0001) ∥ shear plane normal in the extreme processing conditions and the formation of a P-fiber, shear direction ∥ ⟨11$\bar2$0⟩ for intermediate dwell times. The texture of the FCC phase for low processing times was a C texture {100}⟨011⟩ where longer processing times were dominated by a [001] fiber texture with a main {110}⟨100⟩ orientation and emergence of a slight [111] fiber in the longest processing condition. The approaches outlined in this work give insight into quantifying gradients and improve the understanding of highly deformed cobalt.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Highly tunable band inversion in AB 2 X 4 (A=Ge, Sn, Pb; B=As, Sb, Bi; X=Se, Te) compounds

Topological materials have been discovered so far largely by searching for existing compounds in crystallographic databases, but there are potentially new topological materials with desirable features that have not been synthesized. One of the desirable features is high tunability resulting from the band inversion with a very small direct band gap, which can be tuned by changes in pressure or strain to induce a topological phase transition. Here, using density-functional theory (DFT) calculations, we have studied the septuple layered AB 2 X 4 series compounds, where A=(Ge, Sn and Pb), B=(As, Sb and Bi), and X=(Se and Te). With the DFT thermodynamic stability validated by the already-reported compounds in these series, we predict stable Se compounds, which are not found in crystallographic database. Among them, we find that GeBi 2 Se 4 and GeSb 2 Se 4 having a small direct band gap at the Z point are very close to a strong topological insulator, which can be tuned by a moderate pressure to induce the band inversion. Importantly, the topological features with the small direct band gap are well isolated in both momentum and energy windows, which offers high tunability for studying the topological phase transition.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Active sampling for neural network potentials: Accelerated simulations of shear-induced deformation in Cu–Ni multilayers

Neural network potentials (NNPs) can greatly accelerate atomistic simulations relative to ab initio methods, allowing one to sample a broader range of structural outcomes and transformation pathways. In this work, we demonstrate an active sampling algorithm that trains an NNP that is able to produce microstructural evolutions with accuracy comparable to those obtained by density functional theory, exemplified during structure optimizations for a model Cu–Ni multilayer system. We then use the NNP, in conjunction with a perturbation scheme, to stochastically sample structural and energetic changes caused by shear-induced deformation, demonstrating the range of possible intermixing and vacancy migration pathways that can be obtained as a result of the speedups provided by the NNP. The code to implement our active learning strategy and NNP-driven stochastic shear simulations is openly available at https://github.com/pnnl/Active-Sampling-for-Atomistic-Potentials .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

X-ray atomic mapping of quantum dots

We report a model-independent atomic-mapping technique for quantum dots (QDs) by combining Bragg reflection x-ray standing wave (XSW) and grazing incidence diffraction (GID) measurements. In this study, we choose GaAs capped InGaAs QDs/GaAs(001) as a model system to show the locations and arrangements of indium atoms within the QDs along various [hkl] directions. This technique directly reveals the actual amount of positional anisotropy and ordering fraction of indium atoms within the QDs by probing the (1¯11), (111), (311), (1¯31), (113), and (1¯13) crystallographic planes. We find that indium atoms are outwardly shifted along the [001] direction by small fractions of the lattice constant, 0.04a GaAs and 0.06a GaAs from Ga sites for 50- and 150-Å GaAs capped InGaAs QDs, respectively. We observe that an improved coherency factor of the indium atoms within the QDs by 45–60% along the [001] and [011] directions reduces the photoluminescence linewidth by 22%, thus making the QDs efficient for QD-laser and optoelectronic device applications. Here, we also find that the position and ordering of In atoms along the (113) and (1¯13) planes are most sensitive to the thickness of the GaAs cap layer. Our XSW-based results are supported by numerical calculations using a QD-macroscopic structural model based on our GID study. We thus show that this atomic-mapping technique will be useful for studying various quantum structures and tuning their properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Magnetic topological quantum chemistry

For over 100 years, the group-theoretic characterization of crystalline solids has provided the foundational language for diverse problems in physics and chemistry. However, the group theory of crystals with commensurate magnetic order has remained incomplete for the past 70 years, due to the complicated symmetries of magnetic crystals. In this work, we complete the 100-year-old problem of crystalline group theory by deriving the small corepresentations, momentum stars, compatibility relations, and magnetic elementary band corepresentations of the 1,421 magnetic space groups (MSGs), which we have made freely accessible through tools on the Bilbao Crystallographic Server. We extend Topological Quantum Chemistry to the MSGs to form a complete, real-space theory of band topology in magnetic and nonmagnetic crystalline solids – Magnetic Topological Quantum Chemistry (MTQC). Using MTQC, we derive the complete set of symmetry-based indicators of electronic band topology, for which we identify symmetry-respecting bulk and anomalous surface and hinge states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Characterization of Nb films for superconducting qubits using phase boundary measurements

Continued advances in superconducting qubit performance require more detailed understandings of the many sources of decoherence. Within these devices, two-level systems arise due to defects, interfaces, and grain boundaries and are thought to be a major source of qubit decoherence at millikelvin temperatures. In addition to Al, Nb is a commonly used metallization layer in superconducting qubits. Consequently, a significant effort is required to develop and qualify processes that mitigate defects in Nb films. As the fabrication of complete superconducting qubits and their characterization at millikelvin temperatures is a time and resource intensive process, it is desirable to have measurement tools that can rapidly characterize the properties of films and evaluate different treatments. Here, we show that measurements of the variation of the superconducting critical temperature T c with an applied external magnetic field H (of the phase boundary T c – H⁠) performed with very high-resolution show features that are directly correlated with the structure of the Nb films. In combination with x-ray diffraction measurements, we show that one can even distinguish variations in the size and crystal orientation of the grains in a Nb film by small but reproducible changes in the measured superconducting phase boundary.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Quantum Mechanical Evaluation of CZTS Properties for Photovoltaic Applications

As a quaternary semiconductor, CZTS (Cu 2 ZnSnS 4 ) shows promise as a thin-film solar cell material. The constituent elements in CZTS are abundant and non-toxic, and CZTS has an ideal band gap (~1.5 eV) for solar cell applications, which produces a large absorption coefficient. Unfortunately, the low efficiencies and difficulties in synthesizing the desired crystallographic phase (kesterite) and the associated formation of antisite defects limit its deployment. Using theoretical and computational tools, we investigated these current limitations, explored strategies to resolve these issues, and developed design guidelines to improve the efficiency of CZTS-based sunlight absorbers. We first sought to understand the challenges associated with synthesizing the kesterite phase and proposed ways to favor kesterite growth, thus adding to the understanding of CZTS photovoltaics. We also analyzed the major limitations at the atomic scale lowering the efficiency of CZTS: the low open-circuit voltage (V oc ) and the short carrier lifetime, thus addressing the technical effectiveness of CZTS photovoltaics. We believe the latter is due to Shockley-Read-Hall (SRH) recombination centers associated with point defects. We also studied the electronic structure of interfaces and defects introducing such recombination centers, and explored doping strategies to reduce SRH recombination. Ultimately, these efforts will benefit the public by contributing to the development of cheap and efficient solar energy conversion technologies made from abundant, non-toxic materials.

14 SOLAR ENERGY↗
DOE OSTI2021

Molecular Origin of Strain-Induced Chain Alignment in PDPP-Based Semiconducting Polymeric Thin Films

Donor–acceptor (D–A) type semiconducting polymers have shown great potential for the application of deformable and stretchable electronics in recent decades. However, due to their heterogeneous structure with rigid backbones and long solubilizing side chains, the fundamental understanding of their molecular picture upon mechanical deformation still lacks investigation. Here, the molecular orientation of diketopyrrolopyrrole (DPP)-based D–A polymer thin films is probed under tensile deformation via both experimental measurements and molecular modeling. The detailed morphological analysis demonstrates highly aligned polymer crystallites upon deformation, while the degree of backbone alignment is limited within the crystalline domain. Besides, the aromatic ring on polymer backbones rotates parallel to the strain direction despite the relatively low overall chain anisotropy. Additionally, the effect of side-chain length on the DPP chain alignment is observed to be less noticeable. These observations are distinct from traditional linear-chain semicrystalline polymers like polyethylene due to distinct characteristics of backbone/side-chain combination and the crystallographic characteristics in DPP polymers. Furthermore, a stable and isotropic charge carrier mobility is obtained from fabricated organic field-effect transistors. This study deconvolutes the alignment of different components within the thin-film microstructure and highlights that crystallite rotation and chain slippage are the primary deformation mechanisms for semiconducting polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Marine Atmospheric Corrosion of Additively Manufactured Stainless Steels

Additively manufactured (AM) stainless steels exhibit numerous microstructural differences compared to their wrought counterparts, such as Cr enriched dislocation cell structures. The influence these unique features have on a SSs corrosion resistance are still under investigation with most current works limited to laboratory experiments. The work herein shows the first documented study of AM 304L and 316L exposed to a severe marine environment on the eastern coast of Florida with comparisons made to wrought counterparts. Coupons were exposed for 21 months and resulted in significant pitting corrosion to initiate after 1 month of exposure for all conditions. At all times, the AM coupons exhibited lower average and maximum pit depths than their wrought counterparts. After 21 months, pits on average were 4 μm deep for AM 316L specimen and 8 μm deep for wrought specimen. Pits on the wrought samples tended to be nearly hemispherical and polished with some pits showing crystallographic attack while pits on AM coupons exhibited preferential attack at melt pool boundaries and the cellular microstructure.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Exploring competitive metal binding and crystallization of UO 2 2+ and Cu 2+ tetrahydrofuran-2,3,4,5-tetracarboxylic acid complexes

Solvent extractions are used to separate actinide elements from fission products in nuclear waste streams and the successful isolation of specific species utilize subtle differences in metal ligand binding. Metal ligand binding is also important in crystallization of metal organic materials and herein we explore the importance of competitive binding in the tetrahydrofuran-2,3,4,5-tetracarboxylic acid (THFTCA) system. This ligand has been previously evaluated for the selective extraction of uranium from other lanthanides and actinides and in the current research, we evaluate the crystallization of uranyl-THFTCA complexes in the presence of Cu 2+ , Sr 2+ , Th 4+ , and Ce 3+ . Three major phases were formed in the crystallization experiments and characterized with single crystal X-ray diffraction, powder X-ray diffraction, thermogravimetric analysis, and Raman spectroscopy. Two of the resulting phases were novel (UTHF1 ((C 4 H 10 N 2 )[UO 2 (C 8 H 8 O 9 ) 2 ]∙2H 2 O) and UTHF2 (Na[(UO 2 )(C 8 H 5 O 9 )(H 2 O)]∙ 3.5 H 2 O)), whereas the third (CuTHF1) was previously reported in the literature. Raman spectroscopy was utilized to evaluate spectral changes in the mother liquor of UTHF1, UTHF2, and CuTHF1 over time to assess the crystallization process. Further, isothermal titration calorimetry was used to determine the binding constants for UO 2 2+ and Cu 2+ to the THFTCA ligand in solution and evaluate the role of competitive metal binding in this system. The thermodynamic parameters and the crystallographic data were used to justify the formation of a weaker UO 2 2+ -THFTCA complex. Formation of a weaker UO 2 2+ -THFTCA complex supports our findings that UTHF1 only forms in homomeric systems, but suggests that the crystallization of UTHF2 and CuTHF1 is reliant on the presence of additional counter ions and ligands to change the amount of available THFTCA ligand.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Deep operator network surrogate for phase-field modeling of metal grain growth during solidification

A deep operator network (DeepONet) has been constructed that generates accurate representations of phase-field model simulations for evolving two dimensional metal grain morphology growing from melt. These representations serve as lower resolution, computationally efficient stand-ins for quick parameter space exploration of solutions to the the Allen-Cahn equations that dictate the phase-field model simulations. The experimental target for the phase-field model is a uranium casting system cooling a 434 g uranium charge from a maximum temperature of 1400° C at an average rate of 30° C / min , traversing the crystallographic phases of the pure metal. Experimental parameters inform the phase-field model, whose higher resolution computational model solutions are used to train the DeepONet in a given parameter space with the aim of developing a faster, more efficient method for predicting the solidifying metal's microstructure at different potential experimental values. The final DeepONet generates high accuracy, lower resolution predictions with cumulative relative approximation error over all timesteps of less than 0.5%, while ensuring solutions remain within physically feasible ranges. Further, these relative error values are comparable with other state-of-the-art DeepONet models for microstructure evolution, while significantly reducing the amount of training data required. Training a convolutional neural network simultaneously with the DeepONet, enforcing realistic values at the complex metal grain boundaries, and mathematically encoding boundary conditions into the structure of the DeepONet improved prediction accuracy and computational efficiency over a standard DeepONet model.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Magnetic and transport behaviors of non-centrosymmetric Nd 7 Ni 2 Pd

Crystallographic, magnetic, electrical transport and thermodynamic properties of pseudo-binary Nd 7 Ni 2 Pd compound have been studied using temperature-dependent x-ray powder diffraction and physical property measurements. Compared to the ferromagnetic parent Nd 7 Pd 3 , the ground state of Nd 7 Ni 2 Pd is antiferromagnetic, and it exhibits strong metamagnetism. The measurements indicate two antiferromagnetic transitions in fields less than 8 kOe: a second-order paramagnetic to antiferromagnetic at T N2 = 29 K and a weak first-order antiferromagnetic to antiferromagnetic transition at T N1 = 24.5 K. Here, the compound becomes ferromagnetic in fields of 8 kOe and higher with T C = 30 K. Temperature dependence of lattice parameters is anomalous, most prominently in the basal plane at ~30 K; however, there is no detectable structural distortion or clear volume discontinuity around 25 K, suggesting a significant weakening of the first-order transition when compared to the binary Nd 7 Pd 3 .

36 MATERIALS SCIENCE↗
DOE OSTI2021

Decoupling Lattice and Magnetic Instabilities in Frustrated CuMnO2

The AMnO 2 delafossites (A = Na, Cu) are model frustrated antiferromagnets, with triangular layers of Mn 3+ spins. At low temperatures (T N = 65 K), a C2/m → P$\bar1$ transition is found in CuMnO 2 , which breaks frustration and establishes magnetic order. In contrast to this clean transition, A = Na only shows short-range distortions at T N . Here, we report a systematic crystallographic, spectroscopic, and theoretical investigation of CuMnO 2 . We show that, even in stoichiometric samples, nonzero anisotropic Cu displacements coexist with magnetic order. Using X-ray/neutron diffraction and Raman scattering, we show that high pressures act to decouple these degrees of freedom. This manifests as an isostuctural phase transition at ~10 GPa, with a reversible collapse of the c-axis. This is shown to be the high-pressure analogue of the c-axis negative thermal expansion seen at ambient pressure. Density functional theory (DFT) simulations confirm that dynamical instabilities of the Cu + cations and edge-shared MnO 6 layers are intertwined at ambient pressure. However, high pressure selectively activates the former, before an eventual predicted reemergence of magnetism at the highest pressures. Our results show that the lattice dynamics and local structure of CuMnO 2 are quantitatively different from nonmagnetic Cu delafossites and raise questions about the role of intrinsic inhomogeneity in frustrated antiferromagnets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Pyridinium Salts of Dehydrated Lanthanide Polychlorides

The reaction of lanthanide (Ln) chloride hydrates ([Ln(H 2 O) n (Cl) 3 ]) with pyridine (py) yielded a set of dehydrated pyridinium (py-H) Ln-polychloride salts. These species were crystallographically characterized as [[py-H-py][py-H] 2 [LnCl 6 ]] (Ln-6; Ln = La, Ce, Pr, Nd, Sm, Eu, Gd) or [[py-H] 2 [LnCl 5 (py)]] ((Ln-5; Ln = Tb, Dy, Ho, Er, Tm, Yb, Lu). The Ln-6 metal centers adopt an octahedral (OC-6) geometry, binding six Cl ligands. The -3 charge is off-set by two py-H moieties and a di-pyridinium (py-H-py) ion. For the Ln-5 species, an OC-6 anion is formed by the Ln cation binding a single py and five Cl ligands. The remaining -2 charge is offset by two py-H + cations that H-bond to the anion. Significant H-bonding occurs between the various cation/anion moieties inducing the molecular stability. The change in structure from the Ln-6 to Ln-5 is believed to be due to the Ln-contraction producing a smaller unit cell, which prevents formation of the py-H-py + cation, leading to the loss of the H-bonding-induced stability. Based on this, it was determined that the Ln-5 structures only exist when the lattice energy is small. While dehydrated polychloride salts can be produced by simply mixing in pyridine, the final structures adopted result from a delicate balance of cation size, Coulombic charge, and stabilizing H-bonding.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Exploring cycling induced crystallographic change in NMC with X-ray diffraction computed tomography

This study presents the application of X-ray diffraction computed tomography for the first time to analyze the crystal dimensions of LiNi 0.33 Mn 0.33 Co 0.33 O 2 electrodes cycled to 4.2 and 4.7 V in full cells with graphite as negative electrodes at 1 μm spatial resolution to determine the change in unit cell dimensions as a result of electrochemical cycling. The nature of the technique permits the spatial localization of the diffraction information in 3D and mapping of heterogeneities from the electrode to the particle level. An overall decrease of 0.4% and 0.6% was observed for the unit cell volume after 100 cycles for the electrodes cycled to 4.2 and 4.7 V. Additionally, focused ion beam-scanning electron microscope cross-sections indicate extensive particle cracking as a function of upper cut-off voltage, further confirming that severe cycling stresses exacerbate degradation. Finally, the technique facilitates the detection of parts of the electrode that have inhomogeneous lattice parameters that deviate from the bulk of the sample, further highlighting the effectiveness of the technique as a diagnostic tool, bridging the gap between crystal structure and electrochemical performance.

25 ENERGY STORAGE↗