Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coupling constant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Ab initio multireference study of the BN molecule

The lowest 1Sigma(+) and 3Pi states of the BN molecule are studied using multireference configuration interaction (MRCI) and averaged coupled-pair functional (ACPF) methods and large atomic natural orbital (ANO) basis sets, as well as several coupled cluster methods. Our calculations strongly support a 3Pi ground state, but the a1Sigma(+) state lies only 381 +/- 100/cm higher. The a1Sigma(+) state wave function exhibits strong multireference character and, consequently, the predictions of the perturbationally-based single-reference CCSD(T) coupled cluster method are not as reliable in this case as the multireference results. The theoretical predictions for the spectroscopic constants of BN are in good agreement with experiment for the Chi3Pi state, but strongly suggest a misassignment of the fundamental vibrational frequency for the a1Sigma(+) state.

Martin, J. M. L.↗
NASA NTRS1996

Jet Evolution Visualized and Quantified Using Filtered Rayleigh Scattering

Filtered Rayleigh scattering was utilized as a flow diagnostic in an investigation of a method for enhancing mixing in supersonic jets. The primary objectives of the study were to visualize the effect of vortex generating tabs on supersonic jets, to exact quantitative data from these planar visualizations, and to detect the presence of secondary flows (i.e., streamwise vorticity) generated by the tabs. An injection seeded frequency-doubled Nd:YAG was the light source and a 14 bit Princeton Instruments iodine charge coupled display (ICCD) camera recorded the image through an iodine cell. The incident wave length of the laser was held constant for each flow case so that the filter absorbed unwanted background light, but permitted part of the thermally broadened Rayleigh scattering light to pas through. The visualizations were performed for axisymmetric jets (D=1.9 cm) operated at perfectly expanded conditions for Mach 1.0, 1.5, and 2.0. All data were recorded for the jet cross section at x/D=3. One hundred instantaneous images were recorded and averaged for each case, with a threshold set to eliminate unavoidable particulate scattering. A key factor in these experiments was that the stagnation air was heated such that the expansion of the flow in the nozzle resulted in the static temperature in the jet being equal to the ambient temperature, assuming isentropic flow. Since the thermodynamic conditions of the flow were approximately the same for each case, increases in the intensity recorded by the ICCD camera could be directly attributed to the Doppler shift, and hence velocity. Visualizations were performed for Mach 1.5 and Mach 2.0 jets with tabs inserted at the nozzle exit. The distortion of the jet was readily apparent and was consistent with Mie scattering-based visualizations. Asymmetry in the intensities of the images indicate the presence of secondary flow patterns which are consistent with the streamwise vortices measured using more traditional diagnostics in subsonic jets with the same tab configurations. Because each tab causes shocks to form, the assumption of isentropic flow is not valid for these cases. However, within a reasonable first-order estimation,the intensity across the illuminated plane for these cases can be related to a value combining density and velocity.

Reeder, Mark F.↗
NASA NTRSDate not supplied

Preliminary Results Using Galvanic Vestibular Reduction as a Non-Pharmaceutical Tool for Motion Sickness Mitigation

Introduction: Alterations in vestibular sensory processing following G-transitions lead to motion sickness and spatial disorientation upon return to Earth’s gravity. The use of non-pharmaceutical mitigation for motion sickness has several potential advantages over drug treatment options. The purpose of this study was to validate a non-pharmaceutical tool using galvanic vestibular reduction (GVR) to mitigate G-transitional induced motion sickness and spatial disorientation. Methods: Using a repeated measures counter-balanced design, motion sickness and perception are obtained during Coriolis cross-coupling stimuli on a rotating chair across three GVR treatment interventions: throughout stimulus testing (prevention), following symptom onset (rescue), and placebo control. Subjects perform up to 10 sets of pitch head movements during constant rotation. For each set, head movement is cued every 10 seconds, alternating between pitch forward (chin resting to chest) and pitch backward (head upright) for a total of 7 forward and backward movements. During each head movement, subjects are asked to use a joystick to record the magnitude of their perceived rotation along all three axes. During the 2-minute pause between sets, motion sickness symptom scoring was obtained using the Pensacola Diagnostic Index and subject discomfort (0-20) ratings. Performance on a sensorimotor and cognitive test battery is measured during a fourth session to map changes in GVR level with functional performance. Results: Fifteen of 30 subjects have completed testing to date. Preliminary findings suggest GVR may be more effective in reducing symptoms in subjects who self-report less susceptibility on a pre-test motion sickness susceptibility questionnaire. Based on the joystick measures, GVR significantly reduces both the magnitude (mean 22% - 34%) and duration (mean 42% - 49%) of perceived roll and pitch sensation with head movements during constant rotation. It is important to note that comparable levels of GVR (up to 2.5mA) does not impair performance on a functional test battery including mobility and balance tasks. Discussion: Our preliminary findings suggest GVR may be useful in reducing disorienting roll and pitch illusions associated with Coriolis cross-coupling stimuli. While transfer to post-flight treatment will need to be validated, the potential advantages of our non-pharmaceutical countermeasure approach would be to provide rapid therapeutic effect while allowing continuous titration of GVR amplitude during recovery to maintain operational performance.

Gaurav Pradhan↗
DOE OSTI2020

Modeling of thermal pressurization in tight claystone using sequential THM coupling: Benchmarking and validation against in-situ heating experiments in COx claystone

We apply thermoporoelasticity and a sequentially coupling technique for modeling thermally-driven coupled Thermo-Hydro-Mechanical (THM) processes in tight claystone. A THM benchmark case with a corresponding analytic solution for thermoporoelasticity under a constant heat loading verifies the model. Thereafter, two in situ heating experiments are simulated for model validation: a smaller-scale heating experiment (TED experiment) and a larger-scale experiment (ALC experiment) in Callovo-Oxfordian (COx) claystone at the Meuse/Haute-Marne underground research laboratory in France. The model exhibits good performance to match the observed temperature and pore pressure evolution for the smaller-scale TED experiment. For the larger-scale ALC experiment, general trends of thermal-pressurization are captured in the modeling, but pressure is underestimated at some monitoring points during cool-down. This indicates that the THM response in the field may be affected by the variability of rock's properties or irreversible or time-dependent mechanical processes that are not included in the current thermoporoelastic model. The main contributions of this work are as follows: (1) we verify and validate the numerical simulator, TOUGH-FLAC, to be a valuable coupled THM modeling tool; (2) prove that the laboratory determined material parameters can be used as reference values for upscaling experiments. However, to better identify and quantify THM processes with modeling of in situ tests, more emphasize should be dedicated to obtaining high-quality mechanical deformation data.

58 GEOSCIENCES↗
DOE OSTI2025

First Look at Quartic-in-Spin Binary Dynamics at Third Post-Minkowskian Order

We compute the conservative and radiation-reaction contributions to classical observables in the gravitational scattering between a spinning and a spinless black hole to the fourth order in spin and third order in the gravitational constant. The conservative results are obtained from two-loop amplitudes for the scattering process of a massive scalar with a massive spin-𝑠 field (𝑠=0, 1, 2) minimally coupled to gravity, employing the recently introduced spin interpolation method to resolve all spin-Casimir terms. The two-loop amplitude exhibits a spin-shift symmetry in both probe limits, which we conjecture to be a sign of yet unknown integrability of Kerr orbits through the quartic order in spin and to all orders in the gravitational constant. We obtain the radial action from the finite part of the amplitude and use it to compute classical observables, including the impulse and spin kick. This is done using the recently introduced covariant Dirac brackets, which allow for the computation of classical scattering observables for general (nonaligned) spin configurations. Finally, employing the radiation-reaction amplitude proposed by Alessio and Di Vecchia, together with the Dirac brackets, we obtain radiation-reaction contributions to observables at all orders in spin and beyond the aligned-spin limit. We find agreement with known results up to the quadratic order in spin for both conservative and radiation-reaction contributions. Our results advance the state of the art in the understanding of spinning binary dynamics in general relativity and demonstrate the power and simplicity of the Dirac bracket formalism for relating scattering amplitudes to classical observables.

general relativity↗
DOE OSTI2021

Spatial profiles of photon chemical potential in near-field thermophotovoltaic cells

Emitted photons stemming from the radiative recombination of electron–hole pairs carry chemical potential in radiative energy converters. This luminescent effect can substantially alter the local net photogeneration in near-field thermophotovoltaic cells. Several assumptions involving the luminescent effect are commonly made in modeling photovoltaic devices; in particular, the photon chemical potential is assumed to be zero or a constant prescribed by the bias voltage. The significance of photon chemical potential depends upon the emitter temperature, the semiconductor properties, and the injection level. Hence, these assumptions are questionable in near-field thermophotovoltaic devices with nanoscale separation distances between the emitter and the cell. In the present work, an iterative solver that combines fluctuational electrodynamics with the drift-diffusion model is developed to tackle the coupled photon and charge transport problem, enabling the determination of the spatial profile of photon chemical potential beyond the detailed balance approach. Here, the difference between the results obtained by allowing the photon chemical potential to vary spatially and by assuming a constant value demonstrates the limitations of the conventional approaches. This study is critically important for performance evaluation of near-field thermophotovoltaic systems with nanoscale vacuum gaps.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2023

Superconductivity in the Li-B-C system at 100 GPa

Layer Li-B-C compounds have been shown to have feasible superconductivity. Using the adaptive genetic algorithm, we predict the structures of the Li-B-C system at 100 GPa. Here we identify several low-enthalpy metallic phases with stoichiometries of Li B 2 C, Li B 3 C, Li 2 BC 2 , Li 3 B 2 C 3 , Li 3 BC, and Li 5 BC. Using a fast screening method of electron-phonon interaction, we find that Li B 3 C is a promising candidate for superconductivity. The consecutive calculations using the full Brillouin zone confirm the existence of the strong electron-phonon coupling (EPC) in this system. The anharmonic B-C phonon modes near the zone center provide the major contribution to the EPC. The EPC constant is 1.40, and the estimated critical temperature is 22 K. In this paper, we indicate that superconductivity can also happen without a layered structural motif in the Li-B-C system. We also demonstrate an effective strategy for crystal structure prediction of superconducting materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Electrochemical Oxidation of HMF via Hydrogen Atom Transfer and Hydride Transfer on NiOOH and the Impact of NiOOH Composition

Abstract A great deal of attention has been directed toward studying the electrochemical oxidation of 5‐hydroxymethylfurfural (HMF), a molecule that can be obtained from biomass‐derived cellulose and hemicellulose, to 2,5‐furandicarboxylic acid (FDCA), a molecule that can replace the petroleum‐derived terephthalic acid in the production of widely used polymers such as polyethylene terephthalate. NiOOH is one of the best and most well studied electrocatalysts for achieving this transformation; however, the mechanism by which it does so is still poorly understood. This study quantitatively examines how two different dehydrogenation mechanisms on NiOOH impact the oxidation of HMF and its oxidation intermediates on the way to FDCA. The first mechanism is a well‐established indirect oxidation mechanism featuring chemical hydrogen atom transfer to Ni 3+ sites while the second mechanism is a newly discovered potential‐dependent (PD) oxidation mechanism involving electrochemically induced hydride transfer to Ni 4+ sites. The composition of NiOOH was also tuned to shift the potential of the Ni(OH) 2 /NiOOH redox couple and to investigate how this affects the rates of indirect and PD oxidation as well as intermediate accumulation during a constant potential electrolysis. The new insights gained by this study will allow for the rational design of more efficient electrochemical dehydrogenation catalysts.

2,5-furandicarboxylic acid↗
DOE OSTI2024

Tunability and Long-Range Enhancement of Resonance Energy Transfer Facilitated by Plasmonic Nanorods

Resonance energy transfer (RET) between molecules or quantum dots is an important process in many energy-related applications. Different environmental structures have been studied and demonstrated to be able to enhance the RET rates between a nearby donor–acceptor pair. In particular, cylindrical silver nanorods and nanowires have shown an extraordinary ability to transfer energy along their longitudinal axes over large distances. However, the detailed mechanism of such transfer and the effects on the molecular RET process are as yet elusive. In this study, we use the recently developed computational tool based on the plasmon-coupled RET method to systematically study the effects of nanorods with different dimensions on the RET rates. We find that highly frequency-dependent coupling factor (CF) spectra, whose amplitudes determine RET rates, can be obtained due to the localized surface plasmon polariton modes of the rods with nanoscale dimensions. Simple phenomenological models can be derived for the wavelengths of CF peaks in relation to the length and width of the nanorods, providing easy tunability for enhancing the RET rate in specific wavelength ranges. When coupled to longer rods with mesoscale lengths, exponential decay of the CF over long donor–acceptor distances with a small decay constant is observed, leading to the possibility of long-range RET processes. Furthermore, drumhead resonance modes emerge on the flat ends of the rod when the rod’s diameter reaches 300 nm, resulting in extra enhancement to RET rate compared to certain thinner rods. Furthermore, these findings shed new light on the mechanism of plasmonic enhancement with silver nanorods and establish design principles for how to optimally utilize these structures to manipulate RET processes for various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Crystalline Order Yet Glass-Like Heat Transport Driven by Hidden Local Distortions as the Structural Origin of Ultralow Thermal Conductivity in AgErTe 2

Given their rich chemical diversity and the interplay among the p-, d-, and f-orbitals of chalcogens, transition metals, and lanthanides, respectively, rare-earth transition-metal chalcogenides exhibit a wide variety of structural, magnetic, and transport phenomena. As a result, they form a particularly appealing platform for investigating structure–property relationships, emergent electronic and magnetic behaviors, and thermal transport. Here we investigate AgErTe 2 as a model system to understand phonon-glass behavior in ordered crystalline solids, which establishes the design principles for thermal barrier coatings and next-generation thermoelectrics. The local bonding asymmetry and lattice softness suppress the inherently low lattice thermal conductivity, resembling the characteristics of amorphous materials. This suppression is significantly influenced by local off-centering of Ag atoms, which breaks lattice periodicity while maintaining global crystallinity. The presence of antibonding states just below the Fermi level, arising from Ag 4d and Te 5p orbital interactions, leads to lattice softening and destabilizes ideal tetrahedral coordination, resulting in a pseudo Jahn–Teller distortion. Furthermore, the coexistence of weaker, more polarizable Ag–Te bonds and stronger Er–Te bonds creates a complex vibrational landscape enriched with low-frequency modes and enhanced phonon scattering. A pronounced disparity in interatomic force constants gives rise to highly localized, low-energy optical phonons linked to Ag rattling. These flat vibrational modes exhibit strong coupling with transverse acoustic phonons, resulting in ultrashort phonon lifetimes and mean free paths approaching interatomic distances. These features collectively enhance phonon scattering across a broad range of length and energy scales. This work offers a framework for engineering suppressed thermal conductivity in crystalline systems without the introduction of alloying elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Phase diagram of a bilayer superconductor under an in-plane magnetic field

We study a double layer superconductor in the presence of a parallel magnetic field Bby obtaining self-consistent solutions of the Bogoliubov-de Gennes equations, and also using the Pakrovsky- Talapov model for the free energy expressed in terms of the relative phase, namely the difference in the phases of the superconducting order parameters in the two layers. We find that with increasing B, a continuous transition occurs from the Bardeen-Cooper-Schrieffer (BCS) state, where the relative phase is constant, into a state which contains stripes of the BCS state separated by localized vortices in the relative phase. This state is predicted to manifest through oscillations in the amplitude of the superconducting gap and an alternating pattern of supercurrents. With increasing B, the BCS stripe state continuously evolves into the Fulde-Ferrell-Larkin-Ovchinnikov state with linearly varying relative phase and a constant gap amplitude. Furthermore, these predictions apply to superconductivity in bilayer transition-metal-dichalcogenide systems with Ising spin-orbit coupling, and ought to be testable in a recently studied experimental system.

2-dimensional systems↗
DOE OSTI2022

Dynamical exponent of a quantum critical itinerant ferromagnet: A Monte Carlo study

Here we consider the effect of the coupling between two-dimensional (2D) quantum rotors near an XY ferromagnetic quantum critical point and spins of itinerant fermions. We analyze how this coupling affects the dynamics of rotors and the self-energy of fermions. A common belief is that near a q = 0 ferromagnetic transition, fermions induce an Ω/q Landau damping of rotors (i.e., the dynamical critical exponent is z = 3) and Landau overdamped rotors give rise to non-Fermi liquid fermionic self-energy Σ∝ω 2/3 . This behavior has been confirmed in previous quantum Monte Carlo (QMC) studies. Here we show that for the XY case the behavior is different. We report the results of large-scale quantum Monte Carlo simulations, which show that at small frequencies z = 2 and Σ∝ω 1/2 . We argue that the new behavior is associated with the fact that a fermionic spin is by itself not a conserved quantity due to spin-spin coupling to rotors, and a combination of self-energy and vertex corrections replaces 1/q in the Landau damping by a constant. We discuss the implication of these results to experiments.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Time-delayed gamma-ray signatures of heavy axions from core-collapse supernovae

Heavy axions that couple to both quantum electrodynamics and quantum chromodynamics with masses on the order of MeV–GeV and high-scale decay constants in excess of ∼ 10 8 GeV may arise generically in, e.g., axiverse constructions. In this work we provide the most sensitive search to date for the existence of such heavy axions using Fermi-LAT data toward four recent supernovae (SN): Cassiopea A, SN1987A, SN2023ixf, and SN2024ggi. We account for heavy axion production in the proto-neutron-star cores through nuclear and electromagnetic processes and then the subsequent decay of the axions into photons. While previous works have searched for gamma rays from SN1987A using the Solar Maximum Mission that observed SN1987A during the SN itself, we show that using Fermi Large Area Telescope data provides an approximately 5 orders of magnitude improvement in flux sensitivity for axions with lifetimes larger than around 10 yrs. We find no evidence for heavy axions and exclude large regions of previously unexplored parameter space.

Axions↗
DOE OSTI2023

Commercialization of a Comprehensive Spark-Ignition Model for Automotive Engine Applications in CONVERGE CFD

The work completed under this CRADA commercializes an advanced hybrid Lagrangian-Eulerian spark-ignition (LESI) model for multi-dimensional engine simulations. In this report, LESI is coupled with combustion models (WSR, TFM, G-equation) to model spark channel elongation and kernel and flame development in a constant volume combustion vessel, and a four-valve direct-injection spark-ignition (4VDISI) engine in two operating conditions: stoichiometric E30 with no dilution, and stoichiometric PACE-20 with dilution using CONVERGE CFD solver.

42 ENGINEERING↗
NASA NTRS1970

A study of passive microwave techniques applied to geologic problems

Passive microwave techniques were applied to geologic problems, in order to establish the microwave properties of representative rocks and minerals, and to examine the feasibility of using microwave radiometry for geologic mapping problems. A review of microwave pertaining to geology was conducted, coupled with laboratory and field investigations of the microwave emission characteristics of various geologic features. The laboratory studies consisted of dielectric constant measurements of rocks and minerals. A majority of field investigations conducted in the western United States, involved the microwave emission charateristics of rock types, and a portion of the study was concerned with microwave properties of mineralized areas. Experiments were also conducted in the vicinity of a coal seam fire in Colorado and across the San Andreas Fault Zone near the Salton Sea, in Southern California.

Edgerton, A. T.↗
NASA NTRS1973

Proton collisional excitation in the ground configuration of Fe/+12/. II

Improved values of the proton impact excitation cross sections at coronal energies for all the Fe(+12) ground configuration transitions are presented. These were obtained by direct computer integration of the Schroedinger equation (with the states expressed in intermediate coupling) resulting from the semiclassical Coulomb excitation theory formulation of the process. Comparison is made with previous results. The associated rate constants at coronal temperatures are given and compared with the corresponding electron impact excitation rate constants.

Landman, D. A.↗
NASA NTRS1979

Analysis of Lunar Seismic Signals: Determination of Instrumental Parameters and Seismic Velocity Distributions

Inverse filters were designed to correct the effect of instrumental response, coupling of the seismometer to the ground, and near surface structures. The least squares technique was used to determine the instrumental constants and the transfer functions of the long period lunar seismographs. The influence of noise and the results of these calculations are discussed.

Horvath, P.↗