SEARCH · Engineering Papers

Results for “clean energy technology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Flexible FlueCO2

Carbon dioxide (CO2) emission reductions remain a significant challenge on the path to clean energy. There are increasing legislative, social, and environmental factors motivating CO2 emissions reduction from power plants with carbon capture and storage (CCS). CCS in natural gas combined cycle (NGCC) power plants is critical to achieve a net-zero carbon electricity grid. Enhanced 45Q tax credits provide new incentives, but currently available technologies are unable to profitably operate in grids with deep variable renewable penetration which require flexible NGCC operation. Luna Labs has developed the FlueCO2 membrane to enable a profitable NGCC-CCS process. The FlueCO2 membrane couples steam transport across the membrane to CO2 transport in the opposite direction, enabling high capture efficiencies and low energy costs even at low CO2 concentrations. The dual-phase membrane can operate in the range of typical flue gas temperatures and pressures and does not require temperature or pressure cycling. Luna Labs’ FlueCO2 technology enables flexible and profitable operation of NGCC plants with lower capital investment and impact on electricity prices. In this Phase 1 project, Luna Labs utilized experimental testing, modeling, process simulation, and standardized costing methodologies to evaluate the techno-economic value of a 650 MW greenfield NGCC plant with FlueCO2 (NGCC-FlueCO2). Key design requirements for operation were established and plant performance under load-leveling conditions was validated through computational fluid dynamics and process modeling. Luna Labs developed a dynamic modeling tool which modeled plant operational modes across a variety of tax structures and electricity pricing scenarios to project the overall Net Present Value (NPV) of the NGCC-FlueCO2. FlueCO2 minimizes the impact of CCS integration on plant operation by integrating directly into the NGCC heat recovery steam generator (HRSG). By tapping into the plant’s low-pressure (LP) steam, operators can divert LP steam to the greenfield NGCC and/or CCS process in response to dynamic markets. Since FlueCO2 will not significantly affect HRSG (or NGCC) operation, CCS only turns off during peak power demand (>$250/MWh). Under baseload conditions, FlueCO2 lowers the capital (37%), energy (36%) and carbon capture (<$40/tonne) costs and can increase the overall plant lifetime NPV by approximately ~$1B in comparison with NGCC solvent-based capture reference cases (NETL Case 31B). Luna Labs has shared its costing tools with several interested partners and customers, which follows a generalizable approach to costing analysis.

Kelly, Jesse↗

DOE OSTI2022

Powering America’s Non-Powered Dams, One Byte at a Time

Compared with other hydropower development opportunities, powering underutilized water infrastructure provides an attractive option for expanding clean energy in the 21st century. Research conducted by the U.S. Department of Energy’s (DOE) Oak Ridge National Laboratory (ORNL) targets hydropower development at non-powered dams (NPD) from several angles and is increasingly looking to new and improved data sources to inform decision-making. Sponsored by the DOE Water Power Technologies Office (WPTO), ORNL’s latest efforts build on a decade of work to advance understanding and data access for improved decision-making. Outcomes of the most recent research are geared toward better informing NPD stakeholders across a wide spectrum of interests. Furthermore, these outcomes are paving the way for additional federal investments to power NPDs in the U.S., including investments in innovative new technologies that incorporate ecological and social objectives while achieving cost reductions, commercialization and deployment. Here, this research centers around improving the breadth and accessibility of NPD data. These new digital information tools and associated tools can lead to a better decision-making process and support new hydropower development, helping to power America’s NPDs, one “byte” at a time.

13 HYDRO ENERGY↗

DOE OSTI2022

Same Goal, Different Pathways for Energy Transition: A More Holistic, Multisector, Community-Driven Approach

Low- and zero-carbon power systems are central to global decarbonization efforts. Costs for renewable energy (RE) and storage have fallen significantly, and advances in technologies and practices have improved the grid flexibility and stability needed to maintain the reliability of high-RE systems. Zero-carbon power systems, in turn, enable deep decarbonization through the electrification of other sectors, including transportation, buildings, and industry.

100% clean electricity↗

DOE OSTI2024

Computational Approaches for Clean Energy Materials

Currently, 80% of the global final energy consumption occurs in form of fuels and only 20% as electricity. On the other hand, renewable energy additions come almost exclusively in the form of electricity (dominantly photovoltaics and wind). Thus, a successful energy transition will require enormous growth in renewables, sufficient to convert excess electricity into fuels, as well as the development of non-electricity based solar fuel technologies. As much as photovoltaic capacities have grown over the past 20 years, it is far from clear that current technologies and materials are up to the task to grow from here by yet another factor 100 until 2050. Therefore, sustained research efforts on emerging inorganic semiconductors for solar electricity and fuels are essential for facing the double challenge of climate change and energy security. Computational materials science can make important contributions, guiding and supporting research activities through both materials search and discovery and through detailed studies that help to develop a mechanistic understanding of materials performance and bottlenecks. This presentation will highlight three recent computational projects with relevance for photovoltaics and solar fuels (1) Defect graph neural networks (dGNN) for materials discovery in solar thermochemical hydrogen (STCH) [1]. The dGNN approach facilitates broad and fast materials screening for defect properties. (2) Modeling highly off-stoichiometric systems by evaluating the free energy of defect interaction [2]. This approach allows quantitative prediction of H2 production in complex STCH oxides. (3) First-principles atomic structure prediction for interfaces [3]. This work showed how an atomically thin CdCl2 interlayer phase enables in principle ideal electron transport across the incommensurate SnO2/CdTe interface. [1] M.D. Witman, A. Goyal, T. Ogitsu, A.H. McDaniel, S. Lany, Nat. Comput. Sci. (2023). https://doi.org/10.1038/s43588-023-00495-2. [2] A. Goyal, M.D. Sanders, R.P. O'Hayre, S. Lany, PRX Energy 3, 013008 (2024). https://doi.org/10.1103/PRXEnergy.3.013008. [3] A. Sharan, M. Nardone, D. Krasikov, N. Singh, S. Lany, Appl. Phys. Rev. 9, 041411 (2022). https://doi.org/10.1063/5.0104008.

density functional theory↗

DOE OSTI2020

Mysteries of Nuclear Fusion: How can we build a star on Earth? [Slides]

This presentation given at the Women's Physics Summer Camp focuses on nuclear fusion as an alternative to fossil fuels, renewable energy sources and nuclear fission energy. The presentation explains plasma physics and how it might be used to generate power. Current attempts and potential applications are outlined. An appeal is made for people trained in mathematics, physics, chemistry, engineering, computer science to solve these problems. If technical problems can be overcome, fusion technology will play a part in a clean, prosperous Earth and expand humanity’s reach to the stars.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2020

Integrating Clean Energy in Mining Operations: Opportunities, Challenges, and Enabling Approaches

The mining industry is a major source of raw materials for several industries such as manufacturing, transportation, construction, energy, and mining industry itself. It is anticipated that demand for raw materials is going to increase as the population growth and many low-income economies shift to middle-income countries. The increase in mineral demand accompanies by falling mineral ore grade is expected to increase energy demand raising concern of greenhouse gas emission (GHG). Renewable energy can provide mine operators with solutions to several of the challenges they face today, including energy costs, fossil fuel volatility, social license to operate, and meeting environmental, societal, and governance goals. However, the integration of wind, solar, storage, and other renewable technologies face several barriers that are generally not well understood. Many of these barriers will require further research, development, demonstration, and deployment before we see higher levels of renewables adoption in the mining industry. Thus, this report highlights renewable opportunities, barriers, and enabling approaches.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2025

Clean Water Production in Cooling Towers

This project developed and demonstrated a novel technology that produces clean water from cooling tower recirculating water by using the natural evaporation and condensation cycle inside cooling towers. The system captures the escaping plume and converts blowdown quality water into high purity water suitable for on-site reuse such as boiler feed. The technology uses electric fields to ionize exhaust plumes, charge the entrained droplets, and direct them toward collection electrodes where they coalesce and flow downward. This allows water recovery at a low energy cost while reducing visible plume emissions. In addition, we developed a complementary software platform that improves overall cooling tower performance. The system uses wireless sensors and physics-based machine learning algorithms to optimize key parameters of the cooling process. For power generation facilities, this increases the thermal efficiency of the cooling loop and condenser, resulting in measurable cycle efficiency gains. Improvements of one percent or more can deliver significant increases in electricity production for the same fuel input.

01 COAL, LIGNITE, AND PEAT↗

NASA NTRS1982

Dish concentrators for solar thermal energy: Status and technology development

Point-focusing concentrators under consideration for solar thermal energy use are reviewed. These concentrators differ in such characteristics as optical configuration, optical materials, structure for support of the optical elements and of the receiver, mount, foundation, drive, controls and enclosure. Concentrator performance and cost are considered. Technology development is outlined, including wind loads and aerodynamics; precipitation, sand, and seismic considerations; and maintenance and cleaning.

Jaffe, L. D.↗

DOE OSTI2023

Cost and life cycle analysis for deep CO 2 emissions reduction of steelmaking: Blast furnace-basic oxygen furnace and electric arc furnace technologies

Iron and steel manufacturing is the largest contributor to CO 2 emissions among heavy industries worldwide. This is mostly due to the use of coal in blast furnace-basic oxygen furnace (BF-BOF) process for virgin (primary) steel production. The electricity generation mix used in the electric arc furnace (EAF) process to recycle scrap steel also contributes to the CO 2 emission associated with secondary steel production. To decarbonize iron and steel sector, we investigated decarbonization options for BF-BOF and EAF processes, including energy efficiency, carbon capture and storage, and the use of clean energy sources, in various BF-BOF and EAF process configurations. Additionally, for each decarbonization approach, we evaluated the CO 2 reduction potential via life cycle analysis (LCA) and estimated the associated cost through techno-economic analysis (TEA). A typical U.S. BF-BOF for virgin steel production has a cradle-to-gate (CTG) CO 2 emissions of 1,990 kg/MT steel with a levelized cost of steel (LCOS) of $\$439$/MT steel, while a typical U.S. EAF process for secondary steel production in the United States has a CTG CO 2 emissions of 270 kg/MT steel with a LCOS of $\$365$/MT steel. Combining renewable energy sources and carbon capture, BF-BOF CTG CO 2 emissions can be reduced to 16 kg/MT steel, and EAF configurations can achieve similar deep reductions to reach 25 kg/MT steel. The corresponding LCOS with these decarbonization levels is estimated to increase to $\$542$/MT steel and $\$348$/MT steel, respectively. The estimated CO 2 avoidance costs vary from -$\$90$/MT CO 2 to $\$646$/MT CO 2 , depending on the various decarbonization technologies and energy prices.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2024

Experimental investigation of the small-scale prototype of the dew point water recovery system

The article presents experimental investigation of the Dew Point Water Recovery (DPWR) system designed for clean water recovery using the dew point cooling phenomenon. The technology is a novel distillation process which allows for highly efficient water recovery. It is a first distillation technology which allows for water distillation through direct contact with atmospheric air. The authors designed, built, and tested an original prototype of a laboratory-scale DPWR system to verify its basic operating principles and perform performance analysis. It was shown that on average 10 × 10 −6 m 3 of clean water could be recovered from each cubic meter of the supply air with an average GOR of 1.9. Although the operation of the DPWR system requires electricity to drive fans, pumps and other associated equipment, the actual driving force of the system is thermal energy. The average thermal energy demand of the DPWR system was 370 kWh/m 3 , and more than half of this energy was based on the thermodynamic potential of the supply air. Based on experimental data, the mathematical model of the DPWR system was verified and it was found that the average relative discrepancy in predicting air temperature did not exceed 8%, and in predicting air humidity: 5%. In conclusion, the conducted experiments confirmed that the proposed DPWR system is feasible and has the potential to fill the technological gap in terms of a low-energy and easily accessible water recovery method.

42 ENGINEERING↗

DOE OSTI2025

Develop a Simulation Framework for Understanding Physico-Chemical Processes and Optimization of CHZ' Plastic Thermolyze Technology (CRADA Final Report)

Thermolyzer(TM) technology is a third-generation, multi-reactor, oxygen-free, low pressure, slow pyrolysis process. It has proven to be remarkably versatile in successfully processing all types of hydrocarbon waste. These include all seven types of plastics, tires, auto shredder residue, carpet, electronic waste, and composites. Working with the IACMI, Thermolyzer(TM) technology has recovered the glass and carbon fibers from wind turbine blades for reuse into new applications. Its primary output is a synthesis gas that is rich in H 2 , CH 4 , and small amounts of C 2-4 aliphatic hydrocarbons. Other components are CO and CO 2 . Three unique features set Thermolyzer(TM) apart from other pyrolysis systems: the syngas is clean enough to run in Siemens or Solar gas turbines or IC engines without fouling, clean, salable, byproducts are produced, and CO 2 emissions are lower than natural gas power plants. Research results have been obtained from an operating 7 ton/day facility. A 44 ton/day plant has successfully operated as noted above. The process works because it makes use of the recoverable embodied energy in the feedstock. Surprisingly, a pound of some plastics has the same recoverable energy content as a pound of gasoline. Thus, it is imperative to develop a process that economically converts scrap plastics (including ocean plastics) into energy and thereby conserve the non-renewable fossil fuels for future generations. The Thermolyzer(TM) technology can also be used to create liquid fuels like gasoline and diesel from hydrocarbon wastes. Because of the high hydrogen content of the synthesis gas, hydrogen can be recovered more inexpensively than the current solar or wind energy being used to electrolyze water. That hydrogen can be used for fuel cell powered vehicles or converted into ammonia for agriculture or as a hydrogen storage medium. Extension of this technology to other wastes such as tires, auto shredder residue or wood wastes would expand the circular economy.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Collaborating with Utilities to Meet Underserved Community Needs: A Guide to Equitable Commercial Solar and Solar + Storage Deployment

Communities of color and low-income populations dedicate a disproportionate amount of their income to pay for energy. They also experience more frequent and prolonged service disruptions, impacting community health and safety. When designed correctly, commercial solar + storage installations have the potential to ameliorate these issues. However, utility programs created to support such installations are frequently underutilized because communities often lack the time and resources needed to access them. Further, historically, few utilities have had the motivation and incentives or experience to account for this barrier. RMI provided process support to Solar Energy Innovation Network teams, and described their experiences in accessing these clean energy resources to support historically underserved communities in our latest report. The report also outlines the roles of key stakeholders (e.g., utilities, building owners, and community organizations) in supporting program delivery and recommended practices to collaborate to meet community needs. The report focuses on commercial solar and solar + storage resources, including solar + storage microgrids. These technologies can offer benefits to communities who do not own their own properties. When designed to act as a "resilience hub," they can also support communities in times of electricity disruption. The report includes a step-by-step guide to collaborating with utilities to implement programs for historically underserved customers. Utilities can support these projects with financing assistance, modernized rate designs, and, in the deployment phase, technical assistance for system design and interconnection.

14 SOLAR ENERGY↗

DOE OSTI2023

AI-Based Faster-Than-Real-Time Stability Assessment of Large Power Systems with Applications on WECC System

Achieving clean energy goals will require significant advances in regard to addressing the computational needs for next-generation renewable-dominated power grids. One critical obstacle that lies in the way of transitioning today’s power grid to a renewable-dominated power grid is the lack of a faster-than-real-time stability assessment technology for operating a fast-changing power grid. This paper proposes an artificial intelligence (AI) -based method that predicts the system’s stability margin information (e.g., the frequency nadir in the frequency stability assessment and the critical clearing time (CCT) value in the transient stability assessment) directly from the system operating conditions without performing the conventional time-consuming time-domain simulations over detailed dynamic models. Since the AI method shifts the majority of the computational burden to offline training, the online evaluation is extremely fast. This paper has tested the AI-based stability assessment method using multiple dispatch cases that are converted and tuned from actual dispatch cases of the Western Electricity Coordinating Council (WECC) system model with more than 20,000 buses. The results show that the AI-based method could accurately predict the stability margin of such a large power system in less than 0.2 milliseconds using the offline-trained AI agent. Therefore, the proposed method has great potential to achieve faster-than-real-time stability assessment for practical large power systems while preserving sufficient accuracy.

24 POWER TRANSMISSION AND DISTRIBUTION↗

NASA NTRS1980

A New Image for the Water Hyacinth

Walt Disney Company activated a sewage treatment plan using NASA technology to create water hyacinths to clean wastewater by absorbing and metabolizing pollutants. Plants have exciting promise as a natural water purification system which can be established at a fraction of the cost of a conventional sewage treatment facility. Harvested plants can be used as fertilizer. They can also be heat-treated to produce consumer energy in the form of methane gas. If an economical method of drying plants can be developed they may find further utility as high protein animal feed.

Source record↗

DOE OSTI2025

Important Human Actions for Advanced Reactors: Implications for Human Factors

As advanced reactor platforms continue to develop and gain traction in the energy sector there is a need for risk-informed, scalable regulations that match that progress. This is a core component of the U.S. Nuclear Regulatory Commission’s proposed Part 53 Rule Making; the Accelerating Deployment of Versatile, Advanced Nuclear for Clean Energy (ADVANCE) Act; and other efforts that seek to update nuclear power regulations. This paper covers one key aspect of that regulatory evolution: Important Human Actions (IHA). In this paper, we discuss how the understanding and definitions of IHAs have changed and what that means for human factors engagement through the process of developing these technologies. Instead of a narrow focus on control actions that led to an increase in core damage risk, the new focus is on IHAs is “wherever they occur.” What this means is that having a highly automated or passive safety system does not eliminate IHAs. Rather, it shifts the focus point to all the actions that enable these systems. Everything from maintenance, to design, to training can be considered an IHA and that dramatically shifts the efforts and level of engagement necessary for human factors to enable these technologies. We discuss the notions of risk-informed human factors that underpin these efforts, give several examples, and briefly describe the risk assessment methodologies that will be needed. In the past, IHAs were identified and then became a focus point of human factors engineering (HFE) activities to ensure a robust evaluation of the task was completed. The future is less clear. HFE for nuclear energy will need to evolve and become more integrated in technology development than ever before.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗

NASA NTRS2026

Ultrasonic Washer–Dryer System for Space Habitats: Design Upgrades and Parabolic Flight Readiness

Clothing makes up nearly 25% of all non-food supplies sent to the International Space Station (ISS). To support sustainable human missions in deep space, NASA’s Life Support and Habitation Systems Focus Area looks to advance technologies to support and improve logistics. Our team is creating a compact ultrasonic clothing washer/dryer system that bypasses traditional limitations and is suitable for space. Thermal drying uses a lot of energy to evaporate water, while our ultrasonic drying method offers a quicker, more efficient alternative. It uses piezoelectric transducers to vibrate textiles at the micron scale, mechanically removing water as cold mist rather than evaporating it. This speeds up drying and reduces energy use, no matter the fabric makeup. This paper details recent upgrades to a full-scale ultrasonic washer–dryer system, readying it for parabolic flight testing. Improvements include an enhanced human–machine interface, better packaging, and optimized performance and control. We also present extensive pre-flight ground tests conducted to ensure reliability and identify potential risks. Collaborating with P&G, we report preliminary cleaning tests using various detergents. These results lay a crucial foundation for the laundry system designed specifically for space. By cutting clothing-related payload and waste by over 97%, this technology supports long-term human exploration missions on the ISS, the Moon, Mars, and beyond.

Ultrasonic↗

NASA NTRS2026

Ultrasonic Washer–Dryer System for Space Habitats: Design Upgrades and Parabolic Flight Readiness

Laundry↗

DOE OSTI2022

Porous materials for hydrogen storage

Hydrogen is a clean energy carrier and a promising candidate to realize carbon-neutral systems for a sustainable future because the combustion of hydrogen produces only water. The large-scale implementation of hydrogen, particularly in zero-emission hydrogen-powered fuel-cell automobiles, requires efficient hydrogen storage systems; however, the current on-board hydrogen storage technologies mainly rely on costly and potentially unsafe high-pressure compression strategies that reach pressures of up to 700 bar. Recently, solid-state porous materials, such as metal-organic frameworks, have emerged as sorbents that can conceivably store comparable amounts of hydrogen in a safer and more efficient manner relative to the current high-pressure storage technologies. Here this review summarizes the current progress on the development of state-of-the-art porous materials and their composites for hydrogen storage. We hope this work will inspire efforts toward creating next-generation hydrogen storage materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗