Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “classic nonlinearity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

A Method of Optimal Control for Class 8 Vehicle Platoons Over Hilly Terrain

This work develops and implements an NMPC control system to facilitate fuel-optimal platooning of Class 8 vehicles over challenging terrain. Prior research has shown that Cooperative Adaptive Cruise Control (CACC), which allows multiple Class 8 vehicles to follow in close succession, can save between 3 and 8% in overall fuel consumption on flat terrain. However, on more challenging terrain, e.g. rolling hills, platooning vehicles can experience diminished fuel savings, and, in some cases, an increase in fuel consumption relative to individual vehicle operation. This research explores the use of Nonlinear Model Predictive Control (NMPC) with predefined route grade profiles to allow platooning vehicles to generate an optimal velocity trajectory with respect to fuel consumption. In order to successfully implement the NMPC system, a model relating vehicle velocity to fuel consumption was generated and validated using experimental data. Additionally, the predefined route grade profiles were created by using the vehicle's GPS velocity over the desired terrain. The real-time NMPC system was then implemented on a two-truck platoon operating over challenging terrain, with a reference vehicle running individually. The results from NMPC platooning are compared against fuel results from a classical proportional-integral-derivative (PID) headway control method. Furthermore, this comparison yields the comparative fuel savings and energy efficiency benefit of NMPC system. In the final analysis, significant fuel savings of greater than 14 and 20% were seen for the lead and following vehicles relative to their respective traditional cruise control and platooning architectures.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

On the nature of two-photon transitions for a collection of molecules in a Fabry–Perot cavity

Here, we investigate the effect of a cavity on nonlinear two-photon transitions of a molecular system and we analyze how such an effect depends on the cavity quality factor, the field enhancement, and the possibility of dephasing. We find that the molecular response to strong light fields in a cavity with a variable quality factor can be understood as arising from a balance between (i) the ability of the cavity to enhance the field of an external probe and promote multiphoton transitions more easily and (ii) the fact that the strict selection rules on multiphoton transitions in a cavity support only one resonant frequency within the excitation range. Although our simulations use a classical level description of the radiation field (i.e., we solve Maxwell–Bloch or Maxwell–Liouville equations within the Ehrenfest approximation for the field–molecule interaction), based on experience with this level of approximation in the past studies of plasmonic and polaritonic systems, we believe that our results are valid over a wide range of external probing.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Mitigating photorefractive effect in thin-film lithium niobate microring resonators

Thin-film lithium niobate is an attractive integrated photonics platform due to its low optical loss and favorable optical nonlinear and electro-optic properties. However, in applications such as second harmonic generation, frequency comb generation, and microwave-to-optics conversion, the device performance is strongly impeded by the photorefractive effect inherent in thin-film lithium niobate. In this paper, we show that the dielectric cladding on a lithium niobate microring resonator has a significant influence on the photorefractive effect. By removing the dielectric cladding layer, the photorefractive effect in lithium niobate ring resonators can be effectively mitigated. Our work presents a reliable approach to control the photorefractive effect on thin-film lithium niobate and will further advance the performance of integrated classical and quantum photonic devices based on thin-film lithium niobate.

42 ENGINEERING↗
DOE OSTI2020

Exploring Hydrologic Model Process Connectivity at the Continental Scale Through an Information Theory Approach

Exploring water fluxes between hydrological model (HM) components is essential to assess and improve model realism. Many classical metrics for HM diagnosis rely solely on streamflow and hence provide limited insights into model performance across processes. This study applies an information theory measure known as “transfer entropy” (TE) to systematically quantify the transfer of information among major HM components. To test and demonstrate the benefits of TE, we use the Framework for Understanding Structural Errors (FUSE) model to mimic and compare four commonly used HM structures, VIC, PRMS, SACRAMENTO, and TOPMODEL, across 671 catchments spanning a variety of hydrologic regimes in the conterminous United States. We explore connections between HM components and catchment landscape characteristics (e.g., climate, topography, soil, and vegetation) and characterize their nonlinear associations using distance correlation and Spearman correlation coefficients. Our results indicate that while the information transferred from precipitation to runoff is similar across model structures (likely as a result of calibration), the information transferred among other components can vary significantly from a FUSE structure to another. We find that aridity, precipitation duration and frequency, snow fraction, mean elevation, forest area, and leaf area index are often significantly associated with TE between the main HM components. Here, we propose that the presence of meaningful nonlinear associations can be used to diagnose process representation in HMs. Our results highlight the necessity to enhance the conventional streamflow-only calibration approach for a more realistic representation of water dynamics in the models.

large-sample hydrology↗
DOE OSTI2023

Improving multiwell petrophysical interpretation from well logs via machine learning and statistical models

Well-log interpretation estimates in situ rock properties along well trajectory, such as porosity, water saturation, and permeability, to support reserve-volume estimation, production forecasts, and decision making in reservoir development. However, due to measurement errors, variability of well logs caused by multiple measurement vendors, different borehole tools, and nonuniform drilling/borehole conditions, estimations of rock properties with original well logs without proper preprocessing may not be accurate, especially in the context of multiwell estimation. Well-log normalization techniques such as two-point scaling and mean-variance normalization are commonly used to improve the robustness of multiwell rock-property estimation. However, these techniques do not consider the correlation between well logs and require subjective knowledge for their effective implementation. To reduce uncertainties and processing time associated with multiwell rock-property estimation from well logs, we develop discriminative adversarial (DA) and linear constraint models for well-log normalization and rock-property estimation. The DA neural network model developed for well-log normalization and interpretation can perform linear and nonlinear well-log normalization while considering the joint distribution of each well log and rock properties. However, the linear constraint model uses an ensemble of predictions from linear models to constrain well-log normalization and rock-property estimation. We also develop a divergence-based type well identification method to select type (training) wells for a test well based on the statistical similarity of associated well-log distributions instead of the interwell distance. We apply the DA model to perform well-log normalization and prediction of permeability for the Seminole San Andres Unit carbonate reservoir. Compared with the permeability predicted with the classical machine learning model without well-log normalization and models with two-point scaling normalization, the DA model yields the most accurate permeability prediction by decreasing the mean-squared error of permeability prediction by 20%–50%.

Geochemistry & Geophysics↗
NASA NTRS1983

A unified mathematical theory of electrophoretic processes

A mathematical theory is presented which shows that each of the four classical electrophoretic modes (zone electrophoresis, moving boundary electrophoresis, isotachophoresis, and isoelectric focusing) is based on the same general principles and can collectively be described in terms of a single set of equations. This model can predict the evolution of the four electrophoretic modes as a function of time. The model system is one-dimensional, neglecting the effects of electroosmosis, temperature gradients, and any bulk flows of liquid. The model is based on equations which express the components' dissociation equilibria, the mass transport due to electromigration and diffusion, electroneutrality, and the conservation of mass and charge. The model consists of a system of coupled partial differential and nonlinear algebraic equations which can be solved numerically by use of a computer. The versatility of this model was verified using an example of a three-component system containing cacodylate, tris hydroxylmethylaminomethane, and histidine. Results show that this model not only correctly predicts the characteristic features of each electrophoretic mode, but also gives details of the concentration, pH, and conductivity profiles not easily amenable to direct experimental measurement.

Bier, M.↗
DOE OSTI2022

A Realistic Theory of Quantum Measurement

Abstract We propose that the ontic understanding of quantum mechanics can be extended to a fully realistic theory that describes the evolution of the wavefunction at all times, including during a measurement. In such an approach the wave equation should reduce to the standard wave equation when there is no measurement, and describe state reduction when the system is measured. The general wave equation must be nonlinear and nonlocal, and we require it to be time-symmetric; consequently, this approach is not a new interpretation but a new theory. The wave equation is an integrodifferential equation (IDE). The time symmetry requirement leads to a retrocausal approach, in which the wave equation is solved subject to initial and final conditions to determine history at intermediate times. We propose that different outcomes from (apparently) identically prepared experiments may result from uncontrolled parameters; both the nonlocality and the retrocausality of the theory imply that Bell’s Theorem cannot rule out such “hidden variables.” Beginning with Hamilton’s principle, we demonstrate the construction of such a theory by replacing the action with a functional designed to give rise to a nonlinear, nonlocal IDE as the wave equation. This IDE reduces to the standard wave equation (a differential equation) in the absence of a measurement, but exhibits state reduction to a single eigenvalue when the system interacts with another system with the properties of a measurement apparatus. We demonstrate several desirable features of this theory; for other properties we indicate their plausibility and possible avenues to a proof.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Sharing is caring: An extensive analysis of parameter-based transfer learning for the prediction of building thermal dynamics

In recent years deep neural networks have been proposed as a lightweight data-driven model to capture high-dimensional, nonlinear physical processes to predict building thermal responses. However, the need of a large amount of data for the training process of deep neural networks clashes with the potential limited data availability in most existing or new buildings. Transfer learning aims to enhance the performance of a target learner exploiting knowledge from related and similar environments. This study conducted a suite of experiments that leveraged 250 data-driven models based on a synthetic dataset of a building archetype to study the influence of data availability, energy efficiency level, occupancy and climate for the transfer process of thermal dynamics. The performance of the transfer learning process was compared against a classical machine learning approach. Here, the results suggest that building thermal dynamics can be effectively transferred under the same climatic conditions, increasing performance when dealing with different occupancy schedules, efficiency levels and low data availability. Furthermore, the paper compares the performance of both transfer learning and machine learning approaches in an online fashion, to support the implementation in real-world deployment.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Generalized symmetry in dynamical gravity

We explore generalized symmetry in the context of nonlinear dynamical gravity. Our basic strategy is to transcribe known results from Yang-Mills theory directly to gravity via the tetrad formalism, which recasts general relativity as a gauge theory of the local Lorentz group. By analogy, we deduce that gravity exhibits a one-form symmetry implemented by an operator U α labeled by a center element α of the Lorentz group and associated with a certain area measured in Planck units. The corresponding charged line operator W ρ is the holonomy in a spin representation ρ, which is the gravitational analog of a Wilson loop. The topological linking of U α and W ρ has an elegant physical interpretation from classical gravitation: the former materializes an exotic chiral cosmic string defect whose quantized conical deficit angle is measured by the latter. We verify this claim explicitly in an AdS-Schwarzschild black hole background. Notably, our conclusions imply that the standard model exhibits a new symmetry of nature at scales below the lightest neutrino mass. More generally, the absence of global symmetries in quantum gravity suggests that the gravitational one-form symmetry is either gauged or explicitly broken. The latter mandates the existence of fermions. Finally, we comment on generalizations to magnetic higher-form or higher-group gravitational symmetries.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Sampling Low-Dimensional Markovian Dynamics for Preasymptotically Recovering Reduced Models from Data with Operator Inference

This work introduces a method for learning low-dimensional models from data of high-dimensional black-box dynamical systems. The novelty is that the learned models are exactly the reduced models that are traditionally constructed with classical projection-based model reduction techniques. Thus, the proposed approach learns models that are guaranteed to have the well-studied properties of reduced models known from model reduction, without requiring full knowledge of the governing equations and without requiring the operators of the high-dimensional systems. The key ingredient is a new data sampling scheme to obtain re-projected trajectories of high-dimensional systems that correspond to Markovian dynamics in low-dimensional subspaces. The exact recovery of reduced models from these re-projected trajectories is guaranteed pre-asymptotically under certain conditions for finite amounts of data and for a large class of systems with polynomial nonlinear terms. Numerical results demonstrate that the low-dimensional models learned with the proposed approach match reduced models from traditional model reduction up to numerical errors in practice. In conclusion, the numerical results further indicate that low-dimensional models fitted to re-projected trajectories are predictive even in situations where models fitted to trajectories without re-projection are inaccurate and unstable.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2022

The Importance of Internal Climate Variability in Climate Impact Projections

Uncertainty in climate projections is driven by three components: scenario uncertainty, intermodel uncertainty, and internal variability. Although socioeconomic climate impact studies increasingly take into account the first two components, little attention has been paid to the role of internal variability, although underestimating this uncertainty may lead to underestimating the socioeconomic costs of climate change. Using large ensembles from seven coupled general circulation models with a total of 414 model runs, we partition the climate uncertainty in classic dose–response models relating county-level corn yield, mortality, and per-capita gross domestic product to temperature in the continental United States. The partitioning of uncertainty depends on the time frame of projection, the impact model, and the geographic region. Internal variability represents more than 50% of the total climate uncertainty in certain projections, including mortality projections for the early 21st century, although its relative influence decreases over time. We recommend including uncertainty due to internal variability for many projections of temperature-driven impacts, including early-century and midcentury projections, projections in regions with high internal variability such as the Upper Midwest United States, and impacts driven by nonlinear relationships.

climate impacts↗
NASA NTRS1993

Quasi-linear analysis of ion Weibel instability in the earth's neutral sheet

A quasi-linear analysis of the ion Weibel instability (IWI) for waves with parallel propagation is carried out for parameters appropriate to the earth's neutral sheet during the substorm interval. For ion drift speed reaching sizable fraction of the ion thermal speed, unstable waves grow to a nonlinear regime in a time interval greater than an ion gyroperiod. The saturation level is attained with current density reduced to about 15-28 percent of its preactivity level. The unstable wave amplitude normalized to the initial ambient field is found to be in the range of 0.2-0.8. This is accompanied by ion heating along the magnetic field with the parallel temperature being enhanced by 25-90 percent. Thus, the IWI can provide nonadiabatic heating of ions in current disruptions during substorms. The associated anomalous resistivity is estimated to be about 1 x 10 exp -7 to 1 x 10 exp -6 s, which is about 11 to 12 orders of magnitude above the classical resistivity.

Lui, Anthony T. Y.↗
DOE OSTI2023

Preparation for quantum simulation of the ( 1 + 1 ) -dimensional O(3) nonlinear σ model using cold atoms

The 1+1D O(3) non-linear σ-model is a model system for future quantum lattice simulations of other asymptotically-free theories, such as non-Abelian gauge theories. We find that utilizing dimensional reduction can make efficient use of two-dimensional layouts presently available on cold atom quantum simulators. A new definition of the renormalized coupling is introduced, which is applicable to systems with open boundary conditions and can be measured using analog quantum simulators. Monte Carlo and tensor network calculations are performed to determine the quantum resources required to reproduce perturbative short-distance observables. In particular, we show that a rectangular array of 48 Rydberg atoms with existing quantum hardware capabilities should be able to adiabatically prepare low-energy states of the perturbatively-matched theory. Furthermore, these states can then be used to simulate non-perturbative observables in the continuum limit that lie beyond the reach of classical computers.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS2010

Physics-Based Methods of Failure Analysis and Diagnostics in Human Space Flight

The Integrated Health Management (IHM) for the future aerospace systems requires to interface models of multiple subsystems in an efficient and accurate information environment at the earlier stages of system design. The complexity of modern aeronautic and aircraft systems (including e.g. the power distribution, flight control, solid and liquid motors) dictates employment of hybrid models and high-level reasoners for analysing mixed continuous and discrete information flow involving multiple modes of operation in uncertain environments, unknown state variables, heterogeneous software and hardware components. To provide the information link between key design/performance parameters and high-level reasoners we rely on development of multi-physics performance models, distributed sensors networks, and fault diagnostic and prognostic (FD&P) technologies in close collaboration with system designers. The main challenges of our research are related to the in-flight assessment of the structural stability, engine performance, and trajectory control. The main goal is to develop an intelligent IHM that not only enhances components and system reliability, but also provides a post-flight feedback helping to optimize design of the next generation of aerospace systems. Our efforts are concentrated on several directions of the research. One of the key components of our strategy is an innovative approach to the diagnostics/prognostics based on the real time dynamical inference (DI) technologies extended to encompass hybrid systems with hidden state trajectories. The major investments are into the multiphysics performance modelling that provides an access of the FD&P technologies to the main performance parameters of e.g. solid and liquid rocket motors and composite materials of the nozzle and case. Some of the recent results of our research are discussed in this chapter. We begin by introducing the problem of dynamical inference of stochastic nonlinear models and reviewing earlier results. Next, we present our analytical approach to the solution of this problem based on the path integral formulation. The resulting algorithm does not require an extensive global search for the model parameters, provides optimal compensation for the effects of dynamical noise, and is robust for a broad range of dynamical models. In the following Section the strengths of the algorithm are illustrated illustrated by inferring the parameters of the stochastic Lorenz system and comparing the results with those of earlier research. Next, we discuss a number of recent results in application to the development of the IHM for aerospace system. Firstly, we apply dynamical inference approach to a solution of classical three tank problems with mixed unknown continuous and binary parameters. The problem is considered in the context of ground support system for filling fuel tanks of liquid rocket motors. It is shown that the DI algorithm is well suited for successful solution of a hybrid version of this benchmark problem even in the presence of additional periodic and stochastic perturbation of unknown strength. Secondly, we illustrate our approach by its application to an analysis of the nozzle fault in a solid rocket motor (SRM). The internal ballistics of the SRM is modelled as a set of one-dimensional partial differential equations coupled to the dynamics of the propellant regression. In this example we are specifically focussed on the inference of discrete and continuous parameters of the nozzle blocking fault and on the possibility of an application of the DI algorithm to reducing the probability of "misses" of an on-board FD&P for SRM. In the next section re-contact problem caused by first stage/upper stage separation failure is discussed. The reaction forces imposed on the nozzle of the upper stage during the re-contact and their connection to the nozzle damage and to the thrust vector control (TVC) signal are obtained. It is shown that transient impact induced torquean be modelled as a response of an effective damped oscillator. A possible application of the DI algorithm to the inference of damage parameters and predicting fault dynamics ahead of time using the actuator signal is discussed. Finally, we formulate Bayesian inferential framework for development of the IHM system for in-flight structural health monitoring (SHM) of composite materials. We consider the signal generated by piezoelectric actuator mounted on composite structure generating elastic waves in it. The signal received by the sensor is than compared with the baseline signal. The possibility of damage inference is discussed in the context of development of the SHM.

Smelyanskiy, Vadim N.↗
DOE OSTI2024

Posterior comparison of model dynamics in several hybrid turbulence model forms

Hybrid turbulence models that can accurately reproduce unsteady three-dimensional flow physics across the entire range of grid scales and turbulence dynamics from Reynolds-averaged Navier–Stokes (RANS), through large-eddy simulation (LES), down to direct numerical simulations (DNS) are of increasing interest to the turbulence modeling community. However, despite decades of research and development, the basic tasks of eliminating poor-performing hybrid RANS-LES models and accelerating adoption of superior models through well-designed validation and verification have yet to occur. As a step in this direction, in this work we evaluate thirteen different hybrid RANS-LES models via systematic grid refinement of decaying homogeneous isotropic turbulence. We further derive a novel mathematical framework for assessing the energy partitioning dynamics of each Hybrid RANS-LES model, wherein model-to-model variations in energy partitioning can be interpreted as different feedback mechanisms operating on a low-dimensional nonlinear dynamical system. We found that model forms similar to the flow simulation methodology—also often termed very-large eddy simulation—are dynamically inconsistent with DNS at all resolutions. Additionally, we found a strong dynamical similarity in the feedback mechanisms of all models related to detached eddy simulation and partially averaged Navier–Stokes that is inherent to their general model forms.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Jets from shocked metal surfaces with grooves: Missing experiments

Many studies have investigated the mass outflows generated when a planar shock transits an imperfect (“defected”) metal surface, where the defects are symmetric triangular or sinusoidal grooves. Yet a fundamental question remains unanswered: how does the quantity of outflow mass and its maximum velocity vary as a function of the groove cross-sectional aspect ratio? We identify two sets of missing experiments that must be addressed to answer the question. The aspect ratio (groove depth over width) is equivalently represented by θ, the cross sectional half angle, or by η 0 k, the amplitude multiplied by an effective wavenumber. Low θ (high η 0 k) grooves comprise the first set of missing experiments, which are necessary to determine the validity of theoretical predictions of the nonlinear regime (η 0 k ≥ 1, θ < 57.5°). The second set of missing experiments are those in which the volume of the groove (or equivalently, the axial cross-sectional area) has been held constant as θ or η 0 k are varied. Such experiments are necessary to independently measure the effects of variations in groove volume and groove aspect ratio on the resulting jets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

The Spiral Galaxies Flat Rotational Velocity Curve Explained by the Constant Group Velocity of a Nonlinear Density Wave

The rotation velocity curves of stars in galaxies, the motions of pairs of galaxies, and the behavior of galaxies in clusters and super-clusters all indicate that there is a lack of mass on different scales in the universe. In this paper, we derive the expression for rotational velocity using the nonlinear density wave theory considering only stellar components and we show that such theory can support the observed flat rotational velocity curve due to the main property of the soliton wave, which is a constant group velocity of the wave. The surface mass density (SMD) function, used to derive gravitational potential gradient and rotational velocity, is not assumed but rather derived as a solution of the nonlinear Srödinger equation, on the contrary to the widely used, in the literature, exponential disk approximation. Three parameters relevant to the curve shape are the intensities of equilibrium SMD, the amplitude of the wave, and total angular velocity or differential rotation, equivalently. Since the shape of the rotational velocity is highly sensitive to the mentioned parameters, this theory eventually provides a method for a very accurate estimation of galaxy mass and angular velocity as well.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Subspace Methods in Multi-Parameter Seismic Full Waveform Inversion

In full waveform inversion (FWI) high-resolution subsurface model parameters are sought. FWI is normally treated as a nonlinear least-squares inverse problem, in which the minimum of the corresponding misfit function is found by updating the model parameters. When multiple elastic or acoustic properties are solved for, simple gradient methods tend to confuse parameter classes. This is referred to as parameter cross-talk; it leads to incorrect model solutions, poor convergence and strong dependence on the scaling of the different parameter types. Determining step lengths in a subspace domain, rather than directly in terms of gradients of different parameters, is a potentially valuable approach to address this problem. The particular subspace used can be defined over a span of different sets of data or different parameter classes, provided it involves a small number of vectors compared to those contained in the whole model space. Additionally, in a subspace method, the basis vectors are defined first, and a local minimum is found in the space spanned by these. We examine the application of the subspace method within acoustic FWI in determining simultaneously updates for velocity and density. We first discuss the choice of basis vectors to construct the spanned space, from linear updates by distinguishing only the contributions of different parameter classes towards nonlinear updates by adding the contributions of higher-order perturbations of each parameter class. The numerical character of FWI solutions generated via subspace methods involving different basis vectors is then analyzed and compared with traditional FWI methods. The subspace methods can provide better reconstructions of the model, especially for the velocity, as well as improved convergence rates, while the computational costs are still comparable with the traditional FWI methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗