Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cascade”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Thin THz QCL active regions for improved continuous-wave operating temperature

We compare the performance of 10 and 5 μm thick metal–metal waveguide terahertz quantum-cascade laser ridges operating around 2.7 THz and based on a 4-well phonon depopulation active region design. Thanks to reduced heat dissipation and lower thermal resistance, the 5 μm thick material shows an 18 K increase in continuous wave operating temperature compared to the 10 μm material, despite a lower maximum pulsed-mode operating temperature and a larger input power density. A maximum continuous wave operating temperature of 129 K is achieved using the 5 μm thick material and a 15 μm wide ridge waveguide, which lased up to 155 K in the pulsed mode. The use of thin active regions is likely to become increasingly important to address the increasing input power density of emerging 2- and 3-well active region designs that show the highest pulsed operating temperatures.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Intersubband transitions in nonpolar and semipolar III-nitrides: Materials, devices, and applications

In the last two decades, the third-generation wide bandgap semiconductor III-nitrides have revolutionized a myriad of electronic and photonic devices and applications, including power electronics, extreme-environment electronics, RF amplifiers, and optoelectronics such as light-emitting diodes and laser diodes. Recently, III-nitride heterostructures (e.g., AlGaN/GaN) based intersubband transition (ISBT) has garnered considerable research interest for infrared (IR), terahertz (THz), and ultrafast optoelectronics (e.g., photodetectors and quantum cascade lasers) due to its large conduction band offset, large optical phonon energy, and promising room-temperature operation. This paper presents a comprehensive review on the recent progress and challenges of III-nitrides based ISBT from the perspectives of materials, structures, devices, and applications, with a focus on nonpolar and semipolar III-nitrides. Various device structures have been demonstrated for III-nitrides based ISBT, including quantum wells, dots, and wires, among which AlGaN/GaN quantum wells are the most widely used. The effects of device parameters, crystal orientations, and doping on the ISBT properties of AlGaN/GaN quantum wells are discussed. Although the room-temperature operation is still elusive, theoretical and experimental studies show that nonpolar and semipolar III-nitrides based ISBT exhibits tunable ISBT wavelength from far-IR to THz spectral range with higher efficiency compared with polar c-plane ISBT. This review can serve as a gateway to and an important reference for the recent progress and challenges of III-nitrides based ISBT and its potential applications in sensing, communication, ultrafast optoelectronics, and integrated photonics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Particle deceleration for collective QED signatures

Frequency upshifts have been proposed as a first experimental signature of collective effects in quantum electrodynamic cascade generated electron–positron pair plasmas. Since the high effective masses of generated pairs will reduce any frequency change, stopped pairs at a minimal Lorentz factor in the lab frame were thought to be the dominant contribution to the laser upshift. However, we demonstrate that only considering stopped particles unduly neglects the contributions of particles re-accelerated in the laser propagation direction. Re-accelerated particles should, on a per particle basis, affect the laser more strongly and over a much longer timescale. To maximize particle contributions to the laser upshift, we consider a Laguerre–Gaussian (LG) mode laser beam to better reflect generated pairs. Furthermore, the LG mode does not have an advantage in particle deceleration and re-acceleration when compared against a Gaussian beam, but the LG mode can maintain particle contributions for a longer duration, allowing for more pair density accumulation. Deceleration with a structured beam to keep pairs within the laser should create a larger upshift, thereby lowering the demands on the driving laser.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

ETG turbulence in a tokamak pedestal

This paper explores the fundamental characteristics of electron-temperature-gradient (ETG)-driven turbulence in the tokamak pedestal. The extreme gradients in the pedestal produce linear instabilities and nonlinear turbulence that are distinct from the corresponding ETG phenomenology in the core plasma. The linear system exhibits multiple (greater than ten) unstable eigenmodes at each perpendicular wave vector, representing different toroidal and slab branches of the ETG instability. Proper orthogonal decomposition of the nonlinear fluctuations reveals no clear one-to-one correspondence between the linear and nonlinear modes for most wave vectors. Moreover, nonlinear frequencies deviate strongly from those of the linear instabilities, with spectra peaking at positive frequencies, which is opposite the sign of the ETG instability. The picture that emerges is one in which the linear properties are preserved only in a narrow range of k-space. Outside this range, nonlinear processes produce strong deviations from both the linear frequencies and eigenmode structures. This is interpreted in the context of critical balance, which enforces alignment between the parallel scales and fluctuation frequencies. We also investigate the nonlinear saturation processes. We observe a direct energy cascade from the injection scale to smaller scales in both perpendicular directions. However, in the bi-normal direction, there is also nonlocal inverse energy transfer to larger scales. Neither streamers nor zonal flows dominate the saturation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Effect of a guide field on the turbulence like properties of magnetic reconnection

The effect of an external guide field on the turbulence-like properties of magnetic reconnection is studied using five different 2.5D kinetic particle-in-cell (PIC) simulations. The magnetic energy spectrum is found to exhibit a slope of approximately −5/3 in the inertial range, independent of the guide field. On the contrary, the electric field spectrum in the inertial range steepens more with the guide field and approaches a slope of −5/3. In addition, spectral analysis of the different terms of the generalized Ohm's law is performed and found to be consistent with PIC simulations of turbulence and MMS observations. Finally, the guide field effect on the energy transfer behavior is examined using the von Kármán–Howarth (vKH) equation based on incompressible Hall-MHD. The general characteristics of the vKH equation with constant rate of energy transfer in the inertial range are consistent in all the simulations. This suggests that the qualitative behavior of energy spectrum and energy transfer in reconnection are similar to that of turbulence, indicating that reconnection fundamentally involves an energy cascade.

Physics↗
DOE OSTI2023

Energy transfer and scale dynamics in 2D and 3D laser-driven jets

We demonstrate a methodology for diagnosing the multiscale dynamics and energy transfer in complex HED flows with realistic driving and boundary conditions. The approach separates incompressible, compressible, and baropycnal contributions to energy scale-transfer and quantifies the direction of these transfers in (generalized) wavenumber space. We use this to compare the kinetic energy (KE) transfer across scales in simulations of 2D axisymmetric vs fully 3D laser-driven plasma jets. Using the FLASH code, we model a turbulent jet ablated from an aluminum cone target in the configuration outlined. We show that, in addition to its well known bias for underestimating hydrodynamic instability growth, 2D modeling suffers from significant spurious energization of the bulk flow by a turbulent upscale cascade. In 2D, this arises as vorticity and strain from instabilities near the jet's leading edge transfer KE upscale, sustaining a coherent circulation that helps propel the axisymmetric jet farther (⁠ ≈25% by 3.5 ns) and helps keep it collimated. In 3D, the coherent circulation and upscale KE transfer are absent. Here, the methodology presented here may also help with inter-model comparison and validation, including future modeling efforts to alleviate some of the 2D hydrodynamic artifacts highlighted in this study.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Three-dimensional shear-flow instability saturation via stable modes

Turbulence in three dimensions (3D) supports vortex stretching that has long been known to accomplish energy transfer to small scales. Moreover, net energy transfer from large-scale, forced, unstable flow-gradients to smaller scales is achieved by gradient-flattening instability. Despite such enforcement of energy transfer to small scales, it is shown here that the shear-flow-instability-supplied 3D-fluctuation energy is largely inverse-transferred from the fluctuation to the mean-flow gradient, and such inverse transfer is more efficient for turbulent fluctuations in 3D than in two dimensions (2D). The transfer is due to linearly stable eigenmodes that are excited nonlinearly. The stable modes, thus, reduce both the nonlinear energy cascade to small scales and the viscous dissipation rate. The vortex-tube stretching is also suppressed. Up-gradient momentum transport by the stable modes counters the instability-driven down-gradient transport, which also is more effective in 3D than in 2D (≈70% vs ≈50%). From unstable modes, these stable modes nonlinearly receive energy via zero-frequency fluctuations that vary only in the direction orthogonal to the plane of 2D shear flow. The more widely occurring 3D turbulence is thus inherently different from the commonly studied 2D turbulence, despite both saturating via stable modes.

Mechanics↗
DOE OSTI2023

Hydrogen irradiation-driven computational surface chemistry of lithium oxide and hydroxide

We have investigated, using molecular dynamics, the surface chemistry of hydrogen incident on the amorphous and crystalline lithium oxide and lithium hydroxide surfaces upon being slowed down by a collision cascade and retained in the amorphous surface of either Li 2 O or LiOH. We looked for the bonding of H to the resident structures in the surface to understand a possible chain of chemical reactions that can lead to surface transformation upon H atom impact. Our findings, using Density-Functional Theory (DFT) trained ReaxFF force field/electronegativity equalization method potentials, stress the importance of inclusion of polarization in the dynamics of a Li–O–H system, which is also illustrated by DFT energy minimization and quantum–classical molecular dynamics using tight binding DFT. The resulting polar-covalent chemistry of the studied systems is complex and very sensitive to the instantaneous positions of all atoms as well as the ratio of concentrations of various resident atoms in the surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

On the statistical theory of self-gravitating collisionless dark matter flow: High order kinematic and dynamic relations

Dark matter, if it exists, accounts for five times as much as ordinary baryonic matter. To better understand the self-gravitating collisionless dark matter flow on different scales, a statistical theory involving kinematic and dynamic relations must be developed for different types of flow, e.g., incompressible, constant divergence, and irrotational flow. This is mathematically challenging because of the intrinsic complexity of dark matter flow and the lack of a self-closed description of flow velocity. Here, this paper extends our previous work on second-order statistics Xu to kinematic relations of any order for any type of flow. Dynamic relations were also developed to relate statistical measures of different orders. The results were validated by N-body simulations. On large scales, we found that (i) third-order velocity correlations can be related to density correlation or pairwise velocity; (ii) the pth-order velocity correlations follow ∝ a (p+2)/2 for odd p and ∝ a p/2 for even p, where a is the scale factor; (iii) the overdensity δ is proportional to density correlation on the same scale, $\langle$δ$\rangle$∝$\langle$δδ'$\rangle$; (iv) velocity dispersion on a given scale r is proportional to the overdensity on the same scale. On small scales, (i) a self-closed velocity evolution is developed by decomposing the velocity into motion in haloes and motion of haloes; (ii) the evolution of vorticity and enstrophy are derived from the evolution of velocity; (iii) dynamic relations are derived to relate second- and third-order correlations; (iv) while the first moment of pairwise velocity follows $\langle$Δu L $\rangle$=-Har (H is the Hubble parameter), the third moment follows $\langle$(Δu L ) 3 $\rangle$ ∝ ε u ar that can be directly compared with simulations and observations, where ε u ≈ 10 -7 m 2 /s 3 is the constant rate for energy cascade; (v) the pth order velocity correlations follow ∝ a (3p-5)/4 for odd p and ∝ a 3p/4 for even p. Finally, the combined kinematic and dynamic relations lead to exponential and one-fourth power-law velocity correlations on large and small scales, respectively.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Gallium oxide (Ga 2 O 3 ) energy dependent scintillation response to fast neutrons and flash gamma-rays

Gallium oxide is a newly emerged ultrawide bandgap (4.9 eV) semiconductor that is suitable as a combined electronics and radiation detection platform. We have experimentally demonstrated fast neutron and gamma-ray scintillation from Czochralski-grown β-Ga 2 O 3 in a recent series (October 2023) of experiments at the unmoderated pulsed neutron spallation source located at the Los Alamos Neutron Science Center. Using the neutron time-of-flight (TOF) technique and a fast-gated intensified CCD camera, we observed energy-dependent neutron scintillation for neutron energies ranging from 1 to 400 MeV, including the 14.1 MeV neutron energy relevant to D–T fusion. Neutron flux is quantified and calibrated by cascading the scintillator after the fission chamber, enabling a detailed analysis of temporal and energy-dependent characteristics of the scintillation events. Further, a pronounced scintillation signal from the spallation gamma flash with a temporal full width of half maximum of ~4 ns is indicative of the material’s rapid response. Neutron energy dependent scintillation is observed using the TOF method at a 22.6-m distance from the neutron source. These results highlight the possibility of developing a Ga 2 O 3 based fusion neutron diagnostic platform integrated with both scintillation and electronics functions on the integrated chip scale.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

On the statistical theory of self-gravitating collisionless dark matter flow: Scale and redshift variation of velocity and density distributions

The statistics of velocity and density fields are crucial for cosmic structure formation and evolution. Here, this paper extends our previous work on the two-point second-order statistics for the velocity field [Phys. Fluids 35, 077105 (2023)] to one-point probability distributions for both density and velocity fields. The scale and redshift variation of density and velocity distributions are studied by a halo-based non-projection approach. First, all particles are divided into halo and out-of-halo particles so that the redshift variation can be studied via generalized kurtosis of distributions for halo and out-of-halo particles, respectively. Second, without projecting particle fields onto a structured grid, the scale variation is analyzed by identifying all particle pairs on different scales $r$. We demonstrate that: (i) Delaunay tessellation can be used to reconstruct the density field. The density correlation, spectrum, and dispersion functions were obtained, modeled, and compared with the N-body simulation; (ii) the velocity distributions are symmetric on both small and large scales and are non-symmetric with a negative skewness on intermediate scales due to the inverse energy cascade on small scales with a constant rate $\varepsilon_u$; (iii) On small scales, the even order moments of pairwise velocity $\Delta u_L$ follow a two-thirds law $\propto{(-\varepsilon_ur)}^{2/3}$, while the odd order moments follow a linear scaling $\langle(\Delta u_L)^{2n+1}\rangle=(2n+1)\langle(\Delta u_L)^{2n}\rangle\langle\Delta u_L\rangle\propto{r}$; (iv) The scale variation of the velocity distributions was studied for longitudinal velocities $u_L$ or $u_L^{'}$, pairwise velocity (velocity difference) $\Delta u_L$=$u_L^{'}$-$u_L$ and velocity sum $\Sigma u_L$=$u^{'}_L$+$u_L$. Fully developed velocity fields are never Gaussian on any scale, despite that they can initially be Gaussian; (v) On small scales, $u_L$ and $\Sigma u_L$ can be modeled by a $X$ distribution to maximize the entropy of the system. The distribution of $\Delta u_L$ can be different; (vi) On large scales, $\Delta u_L$ and $\Sigma u_L$ can be modeled by a logistic or a $X$ distribution, while $u_L$ has a different distribution; (vii) the redshift variation of the velocity distributions follows the evolution of the $X$ distribution involving a shape parameter $\alpha(z)$ decreasing with time.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Statistical analysis of displacement damage in small devices from neutron and ion irradiation

Modern semiconductor devices, such as gate-all-around nanosheet field-effect transistors (GAA NS FETs), are smaller than displacement damage cascades from fission neutrons. In this regime, device failure may occur through low-probability single events, rather than by parametric degradation previously seen in larger devices. Here, we present a statistical model that predicts the probability of a damage event in a small device and the probability distribution of the magnitude, i.e., number of displacements within the device, from each event. The model is developed first for neutron irradiation and then for energetic ion irradiation. The model is consistent with results from recent experiments in which lithium-ion irradiation produced stepwise increases in subthreshold current in GAA NS FETs.

Wampler, W. R.↗
DOE OSTI2025

General kinetic ion-induced electron emission model for metallic walls applied to biased Z-pinch electrodes

A kinetic ion-induced electron emission (IIEE) model for general applications is developed to obtain the emitted electron energy spectrum for a distribution of ion impacts on a metallic surface. We assume an ionization cascade mechanism and use empirical models for the ion and electron stopping powers. The emission spectrum and the secondary electron yield (SEY) are validated for a variety of materials. The IIEE model is used to study the effect of IIEE on the plasma-material interactions of Z-pinch electrodes. Un-magnetized Boltzmann-Poisson simulations are performed for a Z-pinch plasma doubly bounded by two biased copper electrodes with and without IIEE at bias potentials from 0 to 9 kV. At the anode, the SEY decreases from 0 to 1 kV, but then increases at higher bias potentials. At the cathode, the SEY is much larger due to higher energy ion bombardment and grows with bias potential. As the bias potential increases, the emitted cathode electrons are accelerated to higher energies into the domain, collisionally heating the plasma. Above 1 kV, the heating is strong enough to increase the plasma potential. Despite SEY greater than 1, only a classical sheath forms as opposed to a space-charge limited or inverse sheath due to the emitted electron flux not reaching the space charge current saturation limits. Furthermore, the current in the emissionless cases saturates to a value lower than experiment. With IIEE, the current does not saturate and continues to increase with the 4 kV case, matching most closely with the experiment.

Carbon based materials↗
DOE OSTI2026

Hot electron preheat effects in two-photon polymerization plastic lattice laser-driven shock-tube experiments on the OMEGA laser

We present simulations of Omega shock tube experiments designed to investigate hot electron preheat effects in 3D-printed, two-photon polymerization (2PP) plastic lattices. Preheat is inferred in the experiments from the expansion of a plastic witness disk embedded in the lattice. Using the Eulerian radiation-hydrodynamics code xRAGE, we model shock propagation and preheat from both radiative and hot electron energy sources to evaluate their relative impact. To simulate the transport of laser-generated hot electrons, the nonlocal electron heat transport model proposed by Schurtz, Nicolaï, and Busquet (SNB) is extended with a hot electron source term and an energy cascade algorithm. We explore how variations in ablator, lattice geometry, and laser drive affect the shock velocity and witness disk expansion. Simulations show that the inclusion of a 5 μm gold layer reduces shock pressure by 60% and shock speeds by 30%–40% but does not significantly reduce the hot electron preheat, and that different lattice geometries lead to enhanced shock velocities—up to 40% faster than in homogeneous foams. However, radiative and conductive preheat from classical mechanisms alone fail to match experiment. By including a hot electron source term, we reproduce experimental observables such as disk expansion rates and spatial radiographic features. We find that a hot electron population corresponding to 4%–8% of the incident laser energy with T hot = 50 keV produces expansion which agrees with the experimental data, suggesting hot electron preheat is the most plausible explanation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Time-resolved unsteady shock motion and spectral analysis of a hypersonic shock-wave/boundary-layer interaction over a double-cone

Direct experimental measurements of double-cone shock-wave/boundary-layer interaction dynamics at Mach 7.2 were collected using a schlieren-based shock-detection algorithm at the University of Texas at San Antonio. The points of flow separation and reattachment were spatially and spectrally evaluated at 300 kHz for time-resolved characterization of the unsteadiness of this flow field. The separation bubble was found to rapidly expand and contract about a large mean length. Spectral analysis of the velocity fluctuations of this motion revealed this behavior to be a turbulent phenomenon, with spectral energy trends consistent with the Kolmogorov theory for the turbulent energy cascade.

Glasby, Ryan [ORNL]↗
DOE OSTI2026

Precision ultranarrow-linewidth resonance excitation (PURE) preparation of a molecular beam of nitric oxide molecules for inelastic scattering with argon

We recently reported a novel technique that utilizes narrow-linewidth lasers to selectively excite molecules into a pure quantum state with a well-resolved, tunable distribution of velocities [O. A. Krohn and D. W. Chandler, J. Phys. Chem. Lett. 15(50), 12455–12463 (2024)]. We refer to the preparation of molecules by this technique as precision ultranarrow-linewidth resonant excitation (PURE) preparation. Here, in this study, we pair this PURE preparation methodology with active frequency stabilization of the quantum cascade laser that drives the excitation. In doing so, highly velocity-resolved packets of molecules are possible, with the limitations of this velocity resolution set by the stability of the laser locking and the spectral linewidth of the transition. We show that side-of-fringe locking to a Doppler-broadened absorption spectrum of our target molecule is sufficiently stable for PURE preparation of molecules for long timescales (several hours) with highly resolved velocity spreads (σ < 3 m/s). To demonstrate the scientific utility of this new capability, we present differential cross sections from scattering between a neat molecular beam of argon and a velocity-selected beam of nitric oxide (NO) in a pure quantum state. We observe well-resolved quantum diffraction oscillations in the forward-scattered collisions as well as general trends consistent with prior characterized collisions of NO + Ar.

Krohn, Olivia A. [Sandia National Laboratories (SN↗
DOE OSTI2026

Radiation-induced segregation in dilute Fe–Cr: A rate-theory framework for the Cr enrichment–depletion transition at the grain boundary

Radiation-induced segregation (RIS) poses a significant challenge for ferritic Fe–Cr alloys under irradiation, as it can compromise mechanical integrity and increase susceptibility to intergranular corrosion. Yet, the mechanisms governing Cr segregation remain incompletely understood. Here, in this study, we present a physics-based rate-theory model parameterized using self-consistent mean field theory-based Onsager transport coefficients to investigate RIS at the grain boundary in dilute Fe-(0.1 at. %) Cr. Under equal production rates of vacancies and self-interstitial atoms (SIA), and their equal absorption rates by bulk dislocations, the model simulates the experimentally observed transition from Cr enrichment at low temperatures to depletion at higher temperatures. Under these unbiased conditions, systematic investigation reveals that while temperature-dependent transport properties dictate the segregation direction, dose rate, grain size, and dislocation density only influence the magnitude and spatial extent of Cr segregation. However, under more realistic conditions of preferential vacancy production within damage cascade and/or preferential SIA absorption by bulk dislocations, the enrichment-to-depletion transition shifts to lower temperatures. Our findings demonstrate that RIS predictions based solely on transport coefficients are valid only under symmetric point defect flux conditions, and that biases in defect production and absorption must be considered for accurate predictions. This work provides a mechanistic framework for understanding RIS in ferritic alloys and informs alloy design for advanced nuclear systems.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Hanging droplets from liquid surfaces

Natural and man-made robotic systems use the interfacial tension between two fluids to support dense objects on liquid surfaces. Here, we show that coacervate-encased droplets of an aqueous polymer solution can be hung from the surface of a less dense aqueous polymer solution using surface tension. The forces acting on and the shapes of the hanging droplets can be controlled. Sacs with homogeneous and heterogeneous surfaces are hung from the surface and, by capillary forces, form well-ordered arrays. Locomotion and rotation can be achieved by embedding magnetic microparticles within the assemblies. Direct contact of the droplet with air enables in situ manipulation and compartmentalized cascading chemical reactions with selective transport. Applications including functional microreactors, motors, and biomimetic robots are evident.

36 MATERIALS SCIENCE↗