Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cascade”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

The upper mantle beneath the Cascade Range: A comparison with the Gulf of California

Seismograms from 22 earthquakes along the northeast Pacific rim recorded in southern California form the data set for investigation of the upper mantle beneath the Cascade Range-Juan de Fuca region, a transitional area encompassing both very young ocean floor and a continental margin. These data consist of 853 seismograms (6 deg delta 42 deg) which produce 1068 travel times and 40 ray parameter estimates. These data are compared directly to another large suite of records representative of structure beneath the Gulf of California, an active spreading center. The spreading center model, GCA, was used as a starting point in WKBJ synthetic seismogram modeling and perturb GCA until the northeast Pacific data are matched. Application of wave field continuation to these two groups of data provides checks on model's consistency with the data as well as an estimate of the resolvability of differences between the two areas. Differences between the models derived from these two data sets are interpretable in terms of lateral structural variation beneath the two regimes.

Walck, M. C.↗

Redesign and cascade tests of a supercritical controlled diffusion stator blade-section

A supercritical stator blade section, previously tested in cascade, and characterized by a flat-roof-top suction surface Mach number distribution, has been redesigned and retested. At near design conditions, the losses and air turning were improved over the original blade by 50 percent and 7 percent respectively. The key element in the improved performance was a small blade reshaping. This produced a continuous flow acceleration over the first one-third chord of the suction surface which successfully prevented a premature laminar separation bubble. Several recently available inviscid analysis and one fully viscous (Navier-Stokes) analysis code were used in the redesign process. The validity of these codes was enhanced by the test results.

Schmidt, J. F.↗

Calculation of transonic flow in a linear cascade

Turbomachinery blade designs are becoming more aggressive in order to achieve higher loading and greater range. New analysis tools are required to cope with these heavily loaded blades that may operate with a thin separated region near the trailing edge on the suction surface. An existing, viscous airfoil code was adapted to cascade conditions in an attempt to provide this capability. Comparisons with recently obtained data show that calculated and experimental surface Mach numbers were in good agreement but loss coefficients and outlet air angles were not.

Donovan, L. F.↗

Cascade variable-conductance heat pipe (A0076)

The objective is to verify the capability of a cascade variable conductance heat pipe (CVCHP) system to provide precise temperature control of long life spacecraft without the need for a feedback heater or other power sources for temperature adjustment under conditions of widely varying power input and ambient environment. Solar energy is the heat source and space the heat sink for thermally loading two series connected variable conductance heat pipes. Electronics and power supply equipment requirements are minimal. A 7.5 V lithium battery supplies the power for thermistor type temperature sensors for monitoring system performance, and a 28 V lithium battery supplies power for valve actuation.

Grote, M. G.↗

Development of a 30 percent efficient 3-junction monolithic cascade solar cell

The individual subcells of the 3-junction monolithic cascade concentrator cell are grown lattice mismatched with respect to each other, if appropriate grading layers are inserted between the mismatched layers. Under these conditions, negligible degradation of the properties of either underlying or overlying material results, and high-efficiency subcells are produced by this technique.

Lewis, C. R.↗

Calculation of the 3-D viscous flow at the endwall leading edge region of an axial annular turbine cascade

A three-dimensional viscous computer code (VANS/MD) was employed to calculate the turbulent flow field at the end wall leading edge region of a 20 inch axial annular turbine cascade. The initial boundary layer roll-up and formation of the end wall vortices were computed at the vane leading edge. The calculated flow field was found to be periodic with a frequency of approximately 1600 Hz. The calculated size of the separation region for the hub endwall vortex compared favorably with measured endwall oil traces. In an effort to determine the effects of the turbulence model on the calculated unsteadiness, a laminar calculation was made. The periodic nature of the calculated flow field persisted with the frequency essentially unchanged.

Walitt, L.↗

Hybrid C-H grids for turbomachinery cascades

The three basic types of grids available for two-dimensional cascade configurations are examined with respect to their relative advantages and disadvantages. Subsequently, a hybrid coordinate system is proposed such that it combines the major advantages of the C-type and the H-type meshes. The development of the hybrid grid system employs the patching of appropriate regions of these two basic mesh systems such that the transformed domain has a multi-block structure. Viewing the transformed domain as a three-dimensional surface enables the coordinates to be continuous across the boundaries of the patches in a natural manner.

Ghia, U.↗

An implict LU scheme for the Euler equations applied to arbitrary cascades

An implicit scheme for solving the Euler equations is derived and demonstrated. The alternating-direction implicit (ADI) technique is modified, using two implicit-operator factors corresponding to lower-block-diagonal (L) or upper-block-diagonal (U) algebraic systems which can be easily inverted. The resulting LU scheme is implemented in finite-volume mode and applied to 2D subsonic and transonic cascade flows with differing degrees of geometric complexity. The results are presented graphically and found to be in good agreement with those of other numerical and analytical approaches. The LU method is also 2.0-3.4 times faster than ADI, suggesting its value in calculating 3D problems.

Buratynski, E. K.↗

Effects of indirect bandgap top cells in a monolithic cascade cell structure

The effect of having a slightly indirect top cell in a three junction cascade monolithic stack is calculated. The minority carrier continuity equations are utilized to calculate individual junction performance. Absorption coefficient curves for general III-V compounds are calculated for a variety of direct and indirect gap materials. The results indicate that for a small excursion into the indirect region, (about 0.1 eV), the loss of efficiency is acceptably small (less than 2.5 percent) and considerably less than attempting to make the top junction a smaller direct bandgap.

Curtis, H. B.↗

Long-time states of inverse cascades in the presence of a maximum length scale

It is shown numerically, both for the two-dimensional Navier-Stokes (guiding-center plasma) equations and for two-dimensional magnetohydrodynamics, that the long-time asymptotic state in a forced inverse-cascade situation is one in which the spectrum is completely dominated by its own fundamental. The growth continues until the fundamental is dissipatively limited by its own dissipation rate. Previously announced in STAR as N83-23546

Hossain, M.↗

Redesign and cascade tests of a supercritical controlled diffusion stator blade-section

A supercritical stator blade section, previously tested in cascade, and characterized by a flat-roof-top suction surface Mach number distribution, has been redesigned and retested. At near design conditions, the losses and air turning were improved over the original blade by 50 percent and 7 percent, respectively. The key element in the improved performance was a small blade reshaping. This produced a continuous flow acceleration over the first one-third chord of the suction surface which successfully prevented a premature laminar separation bubble. Several recently available inviscid analysis codes and one fully viscous (Navier-Stokes) analysis code were used in the redesign process. The validity of these codes was enhanced by the test results. Previously announced in STAR as N84-22533

Schmidt, J. F.↗

Calculation of transonic flow in a linear cascade

Turbomachinery blade designs are becoming more aggressive in order to achieve higher loading and greater range. New analysis tools are required to cope with these heavily loaded blades that may operate with a thin separated region near the trailing edge on the suction surface. An existing, viscous airfoil code was adapted to cascade conditions in an attempt to provide this capability. Comparisons with recently obtained data show that calculated and experimental surface Mach numbers were in good agreement but loss coefficients and outlet air angles were not. Previously announced in STAR as N84-24539

Donovan, L. F.↗

Optimization and mechanisms of mistuning in cascades

In the present inverse design procedure for the optimum mistuning of a high bypass ratio shroudless fan that is modeled as a cascade of blades (each with a single torsional degree-of-freedom), linearized supersonic aerodynamic theory is used to compute the unsteady aerodynamic forces in the 'influence coefficient' form at a typical blade section. The mistuning pattern is then numerically optimized in order to achieve a specified increase in the aeroelastic stability margin with a minimum amount of mistuning. If the blades are self-damped, an optimized mistuning pattern can be found that achieves a given stability margin for a much lower level of mistuning than required for the alternate mistuning pattern, which requires only two blade frequencies and is relatively insensitive to implementation errors.

Crawley, E. F.↗

Inverse design technique for cascades

A numerical technique to generate cascades is presented. The basic prescribed parameters are: inlet angle, exit pressure, and distribution of blade thickness and lift along a blade. Other sets of parameters are also discussed. The technique is based on the lambda scheme. The problem of stability of the computation as a function of the prescribed set of parameters and the treatment of boundary conditions is discussed. A one dimensional analysis to indicate a possible way for assuring stability for any two dimensional calculation is provided.

Zannetti, L.↗

Heat transfer results and operational characteristics of the NASA Lewis Research Center Hot Section Cascade Test Facility

The NASA Lewis Research Center gas turbine hot section test facility has been developed to provide a real-engine environment with well known boundary conditions for the aerothermal performance evaluation/verification of computer design codes. The initial aerothermal research data obtained are presented and the operational characteristics of the facility are discussed. This facility is capable of testing at temperatures and pressures up to 1600 K and 18 atm which corresponds to a vane exit Reynolds number range of 0.5x10(6) to 2.5x10(6) based on vane chord. The component cooling air temperature can be independently modulated between 330 and 700 K providing gas-to-coolant temperature ratios similar to current engine application. Research instrumentation of the test components provide conventional pressure and temperature measurements as well as metal temperatures measured by IR-photography. The primary data acquisition mode is steady state through a 704 channel multiplexer/digitizer. The test facility was configured as an annular cascade of full coverage filmcooled vanes for the initial series of research tests.

Gladden, H. J.↗

Estimating unsteady aerodynamic forces on a cascade in a three-dimensional turbulence field

An analytical method has been developed to estimate the unsteady aerodynamic forces caused by flow field turbulence on a wind tunnel turning vane cascade system (vane set). This method approximates dynamic lift and drag by linearly perturbing the appropriate steady state force equations, assuming that the dynamic loads are due only to free stream turbulence and that this turbulence is homogeneous, isotropic, and Gaussian. Correlation and unsteady aerodynamic effects are also incorporated into the analytical model. Using these assumptions, equations relating dynamic lift and drag to flow turbulence, mean velocity, and vane set geometry are derived. From these equations, estimates for the power spectra and rms (root mean squared value, delta) loading of both lift and drag can be determined.

Norman, T.↗

Multiplicity distributions in interaction models used for cascade simulations

In cascade simulations, conservation of energy is of paramount importance. It is pointed out that it is possible to construct algorithms in which energies of secondaries are chosen from physically correct distributions in such a way as to conserve energy, and give physically correct multiplicity distributions without further adjustment. The resulting non-Poissonian nature of the distribution and the approximate KNO scaling are related to the large fluctuations in the energy available for pion production and to the detailed shape of the inclusive momentum distribution. Two multiparticle production algorithms are described which have these features. One is the algorithm used in the simulation of C jets, the other is for a hadron-nucleus interaction model used in the calculation of muon and neutrino fluxes.

Ellsworth, R. W.↗

Numerical analysis of electromagnetic cascades in emulsion chambers

A new calculational scheme of the Monte Carlo method assigned for the investigation of the development of high and extremely high energy electromagnetic cascades (EMC) in the matter was elaborated. The scheme was applied to the analysis of angular and radial distributions of EMC electrons in the atmosphere. By means of this scheme the EMC development in dense medium is investigated and some preliminary data are presented on the behavior of EMC in emulsion chambers. The results of more detailed theoretical analysis of the EMC development in emulsion chambers are discussed.

Plyasheshnikov, A. V.↗