Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “boundary layer flow”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Unsteady three-dimensional marginal separation, including breakdown

A situation involving a three-dimensional marginal separation is considered, where a (steady) boundary layer flow is on the verge of separating at a point (located along a line of symmetry/centerline). At this point, a triple-deck is included, thereby permitting a small amount of interaction to occur. Unsteadiness is included within this interaction region through some external means. It is shown that the problem reduces to the solution of a nonlinear, unsteady, partial-integro system, which is solved numerically by means of time-marching together with a pseudo-spectral method spatially. A number of solutions to this system are presented which strongly suggest a breakdown of this system may occur, at a finite spatial position, at a finite time. The structure and details of this breakdown are then described.

Duck, Peter W.↗
NASA NTRS1990

On the instability of Goertler vortices to nonlinear travelling waves

Recent theoretical work by Hall and Seddougui (1989) has shown that strongly nonlinear, high wavenumber Goertler vortices developing within a boundary layer flow are susceptible to a secondary instability which takes the form of travelling waves confined to a thin region centered at the outer edge of the vortex. The case is considered in which the secondary mode could be satisfactorily described by a linear stability theory and herein the objective is to extend this investigation of Hall and Seddougui (1989) into the nonlinear regime. It was found that at this stage not only does the secondary mode become nonlinear but it also interacts with itself so as to modify the governing equations for the primary Goertler vortex. In this case then, the vortex and the travelling wave drive each other and, indeed, the whole flow structure is described by an infinite set of coupled, nonlinear differential equations. A Stuart-Watson type of weakly nonlinear analysis of these equations is undertaken and concluded, in particular, that on this basis there exist stable flow configurations in which the travelling mode is of finite amplitude. Implications of the findings for practical situations are discussed and it is shown that the theoretical conclusions drawn here are in good qualitative agreement with available experimental observations.

Seddougui, Sharon O.↗
NASA NTRS1989

Correlation of optical phase distortion with turbulent structure in a homogeneous shear flow

The relative importance of small-scale and large-scale turbulent structure to phase distortion in propagation through the homogeneous shear flow is the focus of this study. The importance of large-scale vortical structure and the associated scalar distribution to optical distortion induced by propagation through a turbulent shear flow has been established (Truman and Lee 1989). Phase errors induced in a coherent optical beam by these turbulent fluctuations are computed. This scalar field shows elongated regions of intense fluctuations which have an inclination with respect to the mean flow similar to that of the characteristic hairpin eddies. Long-term plans include an examination of the effects of inhomogeneity through consideration of direct numerical simulations of the channel flow, boundary layer or mixing layer.

Truman, C. Randall↗
NASA NTRS1989

Wind-tunnel investigations of wings with serrated sharp trailing edges

Exploratory wind-tunnel force measurements are presented for two wing geometries with small-scale planar and nonplanar serrated trailing-edge devices (chord-Reynolds numbers ranged from 1.0 - 3.7 x 10 to the 6th). The planar serrated trailing-edge extensions reduced the drag at conditions when trailing-edge separation occurred at low angles of attack. The introduction of serrations reduced or eliminated the drag penalty due to the small (1-2 percent of the chord length) nonplanar trailing-edge flaps, while maintaining the effects of increase in camber. The presence of streamwise vortices immediately downstream of the serrated trailing edges is believed to have favorably affected the boundary-layer flow approaching the trailing edge and the near-wake development, resulting in reduced pressure drag.

Vijgen, P. M. H. W.↗
NASA NTRS1989

Thermal characteristics of mountain desert terrain derived from thermal infrared multispectral scanner measurements

The spatial and temporal variability of mountain-desert territory thermal is examined with an airborne thermal infrared multispectral scanner (TIMS). The purpose of the study is to demonstrate that inhomogeneities of the surface temperatures in the area can be adequately large to influence mesoscale circulations and the turbulence characteristics of boundary-layer flow. Ground truth measurements are compared to the TIMS imagery, with focus placed on the thermal infrared sensitivity to wet and dry soils, terrain elevation, and soil type. The results indicate that variations in the thermal features are dependent on soil type and soil moisture, and that the dependence on surface radiative temperatures on terrain elevation is apparent in daytime measurements.

Astling, E. G.↗
NASA NTRS1991

On the nonlinear stability of a high-speed, axisymmetric boundary layer

The stability of a high-speed, axisymmetric boundary layer is investigated using secondary instability theory and direct numerical simulation. Parametric studies based on the temporal secondary instability theory identify subharmonic secondary instability as a likely path to transition on a cylinder at Mach 4.5. The theoretical predictions are validated by direct numerical simulation at temporally-evolving primary and secondary disturbances in an axisymmetric boundary-layer flow. At small amplitudes of the secondary disturbance, predicted growth rates agree to several significant digits with values obtained from the spectrally-accurate solution of the compressible Navier-Stokes equations. Qualitative agreement persists to large amplitudes of the secondary disturbance. Moderate transverse curvature is shown to significantly affect the growth rate of axisymmetric second mode disturbances, the likely candidates of primary instability. The influence of curvature on secondary instability is largely indirect but most probably significant, through modulation of the primary disturbance amplitude. Subharmonic secondary instability is shown to be predominantly inviscid in nature, and to account for spikes in the Reynolds stress components at or near the critical layer.

Pruett, C. David↗
NASA NTRS1991

Aerothermal study in an axial compression corner with shock impingement at Mach 6

An experimental study of an axial-compression interior-corner region with shock impingement was conducted in the NASA Langley 20-inch Mach 6 Tunnel to obtain aerodynamic heating rate distributions. The model, a generic hypersonic engine inlet, had a sharp leading edge forebody, cowl, and interchangeable struts with sharp and blunt leading edges. Experiments were conducted at free-stream unit Reynolds numbers of 1.68 x 10 to the 6th and 3.35 x 10 to the 6th per foot for the blunt and sharp-strut configurations, respectively. For the sharp-strut configuration, with and without trips, the peak heating occurred on the cowl, near the compression corner, downstream of the forebody oblique shock impingement region. The peak heating levels, for both the tripped and untripped boundary-layer flows were about 45 and 50 times the reference laminar heating levels, respectively. The peak heating for the blunt leading edge strut model, which was 30 times the reference value, occurred on the cowl, away from the corner, where the bow shock from the strut leading edge intersected the cowl surface.

Venkateswaran, S.↗
NASA NTRS1990

A study of turbulence models for prediction of transitional boundary layers

Calculations of two-dimensional transitional boundary layer flows in zero and favorable pressure gradients are presented. The major focus is on the evaluation of current turbulence models to predict quantities such as skin-friction and heat transfer coefficients. Three turbulence models using the mixing length concept along with a one-equation model are considered. These models are tested by comparison with the experiments of Blair and Werle, who investigated flows over a heated flat plate for various levels of free-stream turbulence.

Abid, Ridha↗
NASA NTRS1991

A numerical investigation of supersonic nozzle boundary layer transition

The boundary layer stability within the high-area-ratio nozzle at NASA Lewis was tested at five chamber pressure conditions. For all nozzle conditions examined, Taylor-Goertler vortices grew more rapidly than Tollmien-Schlichting waves. The experimental heat flux was accurately predicted by a laminar boundary layer computation, thereby confirming the laminar nature of the nozzle boundary layer flow. When the chamber pressure was increased in a series of cases, the transition point occurred farther upstream. The number of vortices contained in the dominant instability increased with chamber pressure.

Pauley, Laura L.↗
NASA NTRS1992

Three-Dimensional Turbulent Boundary Layer With Adverse Pressure Gradient

Report describes experiment to measure effects of adverse pressure gradient on three-dimensional turbulent boundary-layer flow; effect of streamwise gradient of pressure on crossflow of particular interest. Production of turbulent kinetic energy grows rapidly in vicinity of step as result of steep mean-flow velocity gradients. Dissipation grows less quickly than production; leading to net growth with distance along streamline.

Driver, David M.↗
NASA NTRS1991

Turbulence modeling

The performance of existing two-equation eddy viscosity models was examined. An effort was made to develop better models for near-wall turbulence using direct numerical simulations of plane channel and boundary layer flows. The asymptotic near-wall behavior of turbulence was used to examine the problems of current second order closure models and develop new models with the correct near-wall behavior. Rapid Distortion Theory was used to analytically study the effects of mean deformation on turbulence, obtain analytical solutions for the spectrum tensor, Reynolds stress tensor, anisotropy tensor and its invariants, which can be used in the turbulence model development. The potential of the renormalization group theory in turbulence modeling was studied, as well as compressible turbulent flows, and modeling of bypass transition.

Shih, Tsan-Hsing↗
NASA NTRS1992

Comment on two-equation models

Several turbulence models are studied and evaluated. All models are compared to each other and experimental values for flat plate boundary layer flow and channel flow. Among the models examined are: K-epsilon, k-omega, q-omega, and k-tau turbulence models. All results are presented in viewgraph format.

Lang, N.↗
NASA NTRS1990

Low Reynolds number kappa-epsilon modeling with the aid of direct simulation data

The constant C(sub mu) and the near-wall damping function f(sub mu) in the eddy-viscosity relation of the kappa-epsilon model are evaluated from direct numerical simulation (DNS) data for developed channel and boundary layer flow at two Reynolds numbers each. Various existing f(sub mu) model functions are compared with the DNS data, and a new function is fitted to the high-Reynolds-number channel flow data. The epsilon-budget is computed for the fully developed channel flow. The relative magnitude of the terms in the epsilon-equation is analyzed with the aid of scaling arguments, and the parameter governing this magnitude is established. Models for the sum of all source and sink terms in the epsilon-equation are tested against the DNS data, and an improved model is proposed.

Rodi, W.↗
NASA NTRS1990

High Reynolds Number Test of the Boeing TR77 Airfoil in the Langley 0.3-Meter Transonic Cryogenic Tunnel

A Boeing TR77 airfoil associated with the Advanced Technology Airfoil Test (ATAT) program was tested in the Langley 0.3 m Transonic Cryogenic Tunnel. Limited analysis of the data indicated that increasing Reynolds number for a fixed Mach number resulted in increased normal-force, nose-down pitching moment, and decreased drag coefficient. Increasing Mach number while keeping the Reynolds number constant yielded the expected increase in normal-force slopes, nose-down pitching moment coefficients, and decrease in angle of attack associated with maximum normal-force coefficient. Turbulent boundary layer flow was achieved over the airfoil at low Reynolds numbers for the test Mach number range using aluminum discs.

Chu, Julio↗
NASA NTRS1991

Heat transfer in the turbulent boundary layer with a step change in surface roughness

Measurements of Stanton numbers, velocity profiles, temperature profiles, and turbulence intensity profiles are reported for turbulent flat plate boundary layer flows with a step change in surface roughness. The first 0.9 m length of the test surface is roughened with 1.27 mm diameter hemispheres spaced 2 base diameters apart in a staggered array. The remaining 1.5 m length is smooth. The experiments show that the step change from a rough to a smooth surface has a dramatic effect on the convective heat transfer. In many cases, the Stanton number drops below the smooth-wall correlation immediately downstream of the change in roughness. The Stanton number measurements are compared with predictions using the discrete element method with excellent results.

Taylor, Robert P.↗
NASA NTRS1991

On the nonlinear stability of a high-speed, axisymmetric boundary layer

The stability of a high-speed, axisymmetric boundary layer is investigated using secondary instability theory and direct numerical simulation. Parametric studies based on the temporal secondary instability theory identify subharmonic secondary instability as a likely path to transition on a cylinder at Mach 4.5. The theoretical predictions are validated by direct numerical simulation at temporally-evolving primary and secondary disturbances in an axisymmetric boundary-layer flow. At small amplitudes of the secondary disturbance, predicted growth rates agree to several significant digits with values obtained from the spectrally-accurate solution of the compressible Navier-Stokes equations. Qualitative agreement persists to large amplitudes of the secondary disturbance. Moderate transverse curvature is shown to significantly affect the growth rate of axisymmetric second mode disturbances, the likely candidates of primary instability. The influence of curvature on secondary instability is largely indirect but most probably significant, through modulation of the primary disturbance amplitude. Subharamonic secondary instability is shown to be predominantly inviscid in nature, and to account for spikes in the Reynolds stress components at or near the critical layer.

Pruett, C. D.↗
NASA NTRS1991

Near-wall modeling of the dissipation rate equation

Near-wall modeling of the dissipation rate equation is investigated and its asymptotic behavior is studied in detail using a k-epsilon model. It is found that all existing modeled dissipation rate equations predict an incorrect behavior for the dissipation rate near a wall. An improvement is proposed and the resulting near-wall dissipation rate distribution is found to be similar to that given by numerical simulation data. To further validate the improved k-epsilon model, it is used to calculate flat-plate turbulent boundary-layer flows at high- as well as low-turbulence Reynolds numbers, and the results are compared with measurements, numerical simulation data, and the calculations of three different two-equation models. These comparisons show that all the models tested give essentially the same flow properties away from the wall; significant differences only occur in a region very close to the wall. In this region, the calculations of the improved k-epsilon model are in better agreement with measurements and numerical simulation data. In particular, the modeled distribution of the dissipation rate is significantly improved and a maximum is predicted at the wall instead of away from the wall. Furthermore, the improved k-epsilon model is found to be the most asymptotically consistent among the four different two-equation models examined.

So, R. M. C.↗
NASA NTRS1992

Direct numerical simulation of laminar breakdown in high-speed, axisymmetric boundary layers

Temporal direct numerical simulation of laminar breakdown via subharmonic secondary instability in high-speed axisymmetric boundary layers has been accomplished using a highly accurate, fully explicit algorithm which combines spectral collocation and high-order compact-difference techniques. Numerical test cases confirm that subharmonic secondary instability is confirmed to be a viable path to transition in high-speed boundary-layer flow. Secondary instability is shown to account for peaks in the Reynolds stresses at or near the critical layer which are not possible from the second-mode primary instability alone. Reynolds stresses spatially reconstructed from the temporal model via the Gaster transformation show a 'spreading angle' of about 12 deg, in qualitative agreement with experimental findings. The rate of broadening of the Reynolds stress peak is a strongly nonlinear phenomenon which cannot be reproduced by secondary instability theory.

Pruett, C. D.↗