Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “boundary layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

The analysis of a nonsimilar laminar boundary layer

A computer code is described which yields accurate solutions for a broad range of laminar, nonsimilar boundary layers, providing the inviscid flow field is known. The boundary layer may be subject to mass injection for perfect-gas, nonreacting flows. If no mass injection is present, the code can be used with either perfect-gas or real-gas thermodynamic models. Solutions, ranging from two-dimensional similarity solutions to solutions for the boundary layer on the Space Shuttle Orbiter during reentry conditions, have been obtained with the code. Comparisons of these solutions, and others, with solutions presented in the literature; and with solutions obtained from other codes, demonstrate the accuracy of the present code.

Stalmach, D. D.↗
NASA NTRS1975

Wall Cooling Effects on Hypersonic Transitional/Turbulent Boundary Layers at High Reynolds Numbers

A 4 degree wedge was used to produce a thick turbulent boundary layer with an edge Mach number of 11. By using a two-dimensional model, the boundary layer was nearly free from upstream history effects associated with nozzle wall turbulent boundary layers. Heat-transfer distributions were used to define regions of laminar, transitional, and turbulent flow at several values of T(sub w)/T(sub t) for an edge unit Reynolds number of 0.47 x lot per cm. Pitot and total temperature profiles and skin-friction measurements were obtained at selected stations along the model. Turbulence parameters (mixing length/sigma and epsilon) were derived from the fully turbulent profiles and used to more completely define the "low Reynolds number" effect. Turbulent Prandtl number distributions are also presented.

Watson, Ralph D.↗
NASA NTRS2019

Evaluation of the Antarctic Boundary Layer Thermodynamic Structure In MERRA2 Using Dropsonde Observations from the Concordiasi Campaign

Recent high-resolution dropsonde observations from the 2010 Concordiasi field campaign in austral spring season show that surface-based inversions (SBIs) over Antarctica are frequently eroded, with well-mixed boundary layers occurring 33% and 18% of the time in West and East Antarctica, respectively. In this study, using the dropsonde observations, we evaluate the performance of the Modern-Era Retrospective analysis for Research and Applications, version 2 (MERRA2) in representing the Antarctic boundary layer thermodynamic structure. Results show that MERRA2 has a good overall representation of the Antarctic surface stability and correctly predicts 82% of the SBIs. However, an under prediction of less stable boundary layer occurrence, especially over the elevated East Antarctic plateau, is favored during conditions of increased lower tropospheric stability associated with model dynamics, indicating difficulty in parameterizing turbulence in very stable boundary layers. In addition, a lower tropospheric cool bias (first model level and above) is observed in the MERRA2 reanalysis, especially over West Antarctica, which amplifies in the boundary layer during mixed conditions. The near-surface cold bias is most pronounced when the model fails to predict mixed layers over West Antarctica, and is expected to negatively impact the representation of surface energy budget and melt processes.

Manisha Ganeshan↗
NASA NTRS1993

Electron generation of electrostatic waves in the plasma sheet boundary layer

Broadband electrostatic noise (BEN) has been shown to occur in conjunction with ion beams; extensive investigations of possible ion beam-related instabilities that could generate the observed wave spectra have been conducted. It has also been demonstrated that unstable electron distribution functions are sometimes measured in the plasma sheet boundary layer. We present simultaneous observations of ion and electron distribution functions and electric field wave spectra measured by ISEE 1 and ISEE 2 in the Earth's magnetotail. As the spacecraft moved from the tail lobe toward the plasma sheet, the fast indication of boundary layer plasma was seen in the electron distributions, followed some minutes later by the detection of boundary layer ions. The onset of large-amplitude electrostatic waves at frequencies up to the electron plasma frequency was coincident with the onset of the boundary layer electrons, suggesting that broadband electrostatic waves may often be generated by unstable electron distributions in the plasma sheet boundary layer, particularly the higher frequency portion of the wave spectrum. The observed changes in the electron distribution functions indicate that the plasma was not heated locally by the waves.

Onsager, T. G.↗
NASA NTRS2000

Measurements in a Transitional Boundary Layer Under Low-Pressure Turbine Airfoil Conditions

This report presents the results of an experimental study of transition from laminar to turbulent flow in boundary layers or in shear layers over separation zones on a convex-curved surface which simulates the suction surface of a low-pressure turbine airfoil. Flows with various free-stream turbulence intensity (FSTI) values (0.5%, 2.5% and 10%), and various Reynolds numbers (50,000, 100,000 200,000 and 300,000) are investigated. Reynold numbers in the present study are based on suction surface length and passage exit mean velocity. Flow separation followed by transition within the separated flow region is observed for the lower-Re cases at each of the FSTI levels. At the highest Reynolds numbers and at elevated FSn, transition of the attached boundary layer begins before separation, and the separation zone is small. Transition proceeds in the shear layer over the separation bubble. For both the transitional boundary layer and the transitional shear layer, mean velocity, turbulence intensity and intermittency (the fraction of the time the flow is turbulent) distributions are presented. The present data are compared to published distribution models for bypass transition, intermittency distribution through transition, transition start position, and transition length. A model developed for transition of separated flows is shown to adequately predict the location of the beginning of transition, for these cases, and a model developed for transitional boundary layer flows seems to adequately predict the path of intermittency through transition when the transition start and end are known. These results are useful for the design of low-pressure turbine stages which are known to operate under conditions replicated by these tests.

Simon, Terrence W.↗
NASA NTRS1992

An experimental examination of the effects of incoming boundary layer modifications on the dynamics of a turbulent compression corner interaction

This experimental study examines the effects of modifications to the incoming turbulent boundary layer on the highly separated shock wave/boundary layer interaction generated by an unswept compression corner. Particular focus is placed on the motion of the unsteady separation shock wave. The flowfield was generated by a 28 deg ramp in a Mach 5 flow with a freestream Reynolds number of 50 x 10 exp 6/m. The incoming turbulent boundary layer transitioned naturally and developed under near-adiabatic wall conditions. Modification of the flow entering the interaction was effected through either a single plate boundary layer manipulator (BLM) or riblets. The BLM reduced the length of separation by 35-45 percent and reduced the streamwise extent of the separation shock motion by 36-74 percent. Examination of the flowfield downstream of the BLM showed this result to be due to the inviscid preturning of the flow by the BLM, and not by changes to the boundary layer dynamics. The riblets had no measurable effect on the compression corner interaction.

Mcclure, W. B.↗
NASA NTRS1972

The effect of angle of attack on boundary-layer transition on cones.

Boundary-layer transition on 5- and 15-deg half-angle cones was studied as a function of angle of attack (ranging from 0 to 20 deg) in a 3.5 ft hypersonic wind tunnel at a freestream Mach number of 7.4. It is shown that the influence of the angle of attack on the transition Reynolds number is a function of the meridian angle. On the windward ray of the 15-deg cone, transition Reynolds numbers show an initial slight increase and then a decrease with increasing angle of attack; leeward-ray Reynolds numbers for this cone decrease rapidly with angle of attack. Windward-ray transition Reynolds numbers increase monotonically with angle of attack on the 5-deg cone, but the effect of the angle of attack on the leeward ray is the same as for the 15-deg cone.

Mateer, G. G.↗