Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “X RADIATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

On the mass of the Cepheid X Cygni

Using a new non-Lagrangian hydrodynamic radiation transport code, models of the Cepheid X Cygni have been calculated and compared with new observations. Adopting an effective temperature of 5300 K, the luminosity was varied for stellar masses of 6, 8, and 9 solar masses in order to obtain a period of 16.4d. The results indicate that in order to find reasonable agreement between the light curves as calculated and observed, the mass used in the models must be nearly the evolutionary mass, not some 60% less as found in earlier work for Cepheids with periods from 7d to 10d. In addition, the new observations support the physical reality of the so-called 'artificial viscosity dip'.

Davis, C. G.↗
NASA NTRS1974

The nature of Cygnus X-3 - A prototype for old population binary X-ray sources

Description of a model for Cyg X-3 based on a short-lived phase in the evolution of a U Geminorum-type binary where rapid mass transfer and mass loss occurs. X rays are generated by accretion on the white dwarf component, while both stars are enveloped in a thick stellar wind emanating from the red dwarf. Electron scattering in the cloud is responsible for the modulation of the X rays with the orbital period of 4.8 hours. Ultraviolet radiation and low-energy X rays absorbed in the cloud are reradiated in the optical and infrared, which, it is predicted, will display a 4.8-hr modulation in phase with the X-ray light curve. The X-ray absorption cutoff should also vary with phase, appearing at minimum energy when the source is at maximum light. The model also provides a framework in which certain aspects of the associated nonthermal radio source may be understood. Finally, it is suggested that the model may be applicable to Sco X-1 as well.

Davidsen, A.↗
NASA NTRS1978

OSO 8 X-ray spectra of clusters of galaxies. I - Observations of twenty clusters: Physical correlations

OSO 8 X-ray spectra from 2 to 20 keV have been analyzed for 26 clusters of galaxies. For 20 clusters temperatures, emission integrals, iron abundances, and low-energy absorption measurements are presented. The data give, in general, better fits to thermal bremsstrahlung than to power-law models. Eight clusters have positive iron emission-line detections at the 90% confidence level, and all 20 cluster spectra are consistent with Fe/H = 0.000014 by number with the possible exception of Virgo. Thus it is confirmed that X-ray emission in this energy band is predominantly thermal radiation from hot intracluster gas rather than inverse Compton radiation. Physical correlations between X-ray spectral parameters and other cluster properties are examined. It is found that (1) the X-ray temperature is approximately proportional to the square of the velocity dispersion of the galaxies; (2) the emission integral is a strong function of the X-ray temperature; (3) the X-ray temperature and emission integral are better correlated with cluster central-galaxy density than with richness; and (4) the fraction of galaxies which are spirals is correlated with the observed ram pressure in the cluster core.

Mushotzky, R. F.↗
NASA NTRS1992

Impulsive phase Fe K-alpha emission in a flare of 1989 March

Evidence for enhanced Fe K-alpha line emission that is coincident (to within 15 s) of an intense hard X-ray (greater than 50 keV) burst is presented on the basis of observations of the Fe K-alpha soft X-ray line made with the SMM. Three different models for explaining the K-alpha enhancement are investigated, namely, photoexcitation by soft X-ray thermal bremsstrahlung radiation from an isothermal source, collisional excitation by nonthermal thick-target electrons, and photoexcitation by a nonthermal hard X-ray flux distribution which extends with a power-law spectrum down to the Fe K-alpha ionization threshold at 7.1 keV. It is found that, to within the limits of isothermal temperature and emission measure set by soft X-ray observations, the thermal photoexcitation model cannot reproduce satisfactorily the intensity of enhanced K-alpha emission during the hard X-ray impulsive phase. The impulsive phase K-alpha flux exceeds that predicted by the thermal photoexcitation model by about 3 sigma. The implications of these results for the nonthermal interpretation of impulsive hard X-ray bursts in solar flares are discussed.

Zarro, D. M.↗
DOE OSTI2022

Physical optics simulations for synchrotron radiation sources

Here we describe approaches to high-accuracy physical optics calculations used for the development of x-ray beamlines at synchrotron radiation sources, as well as simulation of experiments and processing of experimental data at some of these beamlines. We pay special attention to the treatment of the partial coherence of x rays, a topic of high practical importance for modern low-emittance high-brightness synchrotron radiation facilities. The approaches are based, to a large extent, on the works of Emil Wolf and co-authors, including the basic scalar diffraction theory and the coherent mode decomposition method. The presented simulation examples are related to the case of the novel Coherent Diffractive Imaging beamline that is currently under development at the National Synchrotron Light Source II at the Brookhaven National Laboratory.

36 MATERIALS SCIENCE↗
DOE OSTI2021

The High-energy Spectrum of the Nearby Planet-hosting Inactive Mid-M Dwarf LHS 3844

To fully characterize the atmospheres, or lack thereof, of terrestrial exoplanets, we must include the high-energy environments provided by their host stars. The nearby mid-M dwarf LHS 3844 hosts a terrestrial world that lacks a substantial atmosphere. We present a time-series UV spectrum of LHS 3844 from 1131 to 3215 Å captured by HST/COS. We detect one flare in the FUV that has an absolute energy of 8.96 ± 0.77 × 10{sup 28} erg and an equivalent duration of 355 ± 31 s. We extract the flare and quiescent UV spectra separately. For each spectrum, we estimate the Lyα flux using correlations between UV line strengths. We use Swift-XRT to place an upper limit on the soft X-ray flux and construct a differential emission model to estimate flux that is obscured by the interstellar medium. We compare the differential emission model flux estimates in the XUV to other methods that rely on scaling from the Lyα, Si iv, and N v lines in the UV. The XUV, FUV, and NUV flux of LHS 3844 relative to its bolometric luminosity is log{sub 10}(L {sub band}/L {sub Bol}) =−3.65, −4.16, and −4.48, respectively, for the quiescent state. These values agree with trends in high-energy flux as a function of stellar effective temperature found by the MUSCLES survey for a sample of early-M dwarfs. Many of the most spectroscopically accessible terrestrial exoplanets orbit inactive mid-to-late M dwarfs like LHS 3844. Measurements of M dwarf high-energy spectra are preferable for exoplanet characterization but are not always possible. The spectrum of LHS 3844 is a useful proxy for the current radiation environment for these worlds.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1978

The EUV continuum emission /1400-1960 A/ in a solar flare observed from Skylab

The total radiative output in the EUV continuum (1400-1960 A) from the 5 September 1973 flare has been obtained from the EUV spectra of the flare observed with the NRL slit spectrograph (SO82B) on Skylab. The radiative energy in the EUV continuum is of the order of 10 to the 29th ergs, which is more than a factor of 2 greater than those radiated in soft X-rays (8-20 A) and in H-alpha for the flare. Thus, the EUV continuum emission is an important radiative energy loss, and should be included in the consideration of the energy balance of the flare.

Cheng, C.-C.↗
NASA NTRS1989

Escape of fundamental electron-cyclotron maser emission from the sun and stars

It is shown that fundamental x-mode emission from flaring regions can undergo partial mode conversion at the second-harmonic absorption layer, with a fraction emerging in the o mode through a window near theta = 90 deg; fundamental o-mode radiation can emerge through this window directly. The optical depth for mode-converted x-mode radiation is up to 200 times less than the depth tau(x) for unconverted radiation; the o-mode depth is up to c-squared/V-squared (roughly 1000) times smaller than tau(x), where V is the thermal velocity of the plasma. This mechanism is linear and threshold-free, requires little scattering or refraction of the emitted radiation, and permits the strongest instability (fundamental x-mode) to dominate in producing the observed emission.

Robinson, P. A.↗
DOE OSTI2020

TMS XTRRA experiments on NIF

The study of x-ray induced rapid heating and the resulting material responses - (thermomechanical shock (TMS) and thermo-structural response (TSR)) - is important to our understanding of material behavior in extreme environments. A series of high conversion efficiency (XRCE) x-ray sources have been developed for the NIF laser facility ranging in fluence and spectral content. In conjunction with source development, we have developed a new XTRRA (X-ray Transport and Radiation Response Analysis) test cassette to hold a set of samples, each at equal distance from target chamber center (TCC) where the x-ray source is placed. Design and performance details of the x-ray sources is discussed elsewhere. Here, we describe the development and use of this TMS XTRRA test cassette. The XTRRA test cassette is a snout mounted on a NIF Diagnostic Instrument Manipulator (DIM) designed to position six samples equidistant from the x-ray source to assure uniform irradiation of all samples. Photon Displacement interferometry (PDI) is used to measure the displacement of the rear surface of each sample resulting from x-ray exposure on the front of the sample. This will help determine the x-ray generated impulse on the sample. The samples are retrieved from the snout after the shot for inspection and post-shot analysis including the measurement of sample ablated mass and engineering tests examining changes in the material structure. The data from experiments are compared to predictions from LLNL’s ASC codes and used to inform models implemented in these codes. Thus, XRCE x-ray sources with the XTRRA snout at the National Ignition Facility (NIF) laser at the Lawrence Livermore National Laboratory [1,2] provide the ability to expose a broad range of material samples directly to high x-ray fluence, measure shock transits, and recover the sample for further analysis post-shot.

36 MATERIALS SCIENCE↗
NASA NTRS1985

X-ray images of W28 and 3C400.2 - Two radio-shell supernova remnants with centrally-peaked X-ray emission

X-ray images of the supernova remnants (SNRs) W28 and 3C400.2 were obtained using the Imaging Proportional Counter (IPC) on the Einstein Observatory. Despite the shell-like radio morphology of these remnants, their X-ray emission is centrally peaked. Two possible X-ray emission mechanisms are explored: synchrotron emission due to an active central pulsar, and thermal emission from a thin hot plasma filling the interior of the remnant. Comparisons of X-ray and radio properties of W28 and 3C400.2 with known Crab-like remnants suggest that synchrotron emission is not a very plausible X-ray emission mechanism. Optical and radio observations suggest that both SNRs exploded in a dense cloud and have evolved rapidly to the radiative stage. The X-ray morphology observed is similar to that predicted for SNRs in such an environment.

Matsui, Y.↗
DOE OSTI2021

Disentangling x-ray dichroism and birefringence via high-purity polarimetry

High-brilliance synchrotron radiation sources have opened new avenues for x-ray polarization analysis that go far beyond conventional polarimetry in the optical domain. With linear x-ray polarizers in a crossed setting, polarization extinction ratios down to 10 -10 can be achieved. This renders the method sensitive to probe the tiniest optical anisotropies that would occur, for example, in strong-field quantum electrodynamics due to vacuum birefringence and dichroism. Here we show that high-purity polarimetry can be employed to reveal electronic anisotropies in condensed matter systems with utmost sensitivity and spectral resolution. Taking CuO and La 2 CuO 4 as benchmark systems, we present a full characterization of the polarization changes across the Cu K-absorption edge and their separation into dichroic and birefringent contributions. At diffraction-limited synchrotron radiation sources and x-ray lasers, where polarization extinction ratios of 10 -12 can be achieved, our method has the potential to assess birefringence and dichroism of the quantum vacuum in extreme electromagnetic fields.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1973

Radiative lifetimes and band oscillator strengths for metal oxides. II - SiO E 1 Sigma /+/-X 1 Sigma /+/

Use of an electron-beam phase-shift apparatus to obtain the radiative lifetimes for vibrational levels of the SiO E 1 Sigma (+) state. It is found that the radiative lifetimes for the vibrational transitions of the E-X band are independent of the vibrational upper state. The measured phase shifts yield cascade free lifetimes of 10.5 plus or minus 1.1 nsec for v' from 1 to 7. Spectroscopic data from Elander and Lagerqvist (1971) were used to calculate potential curves by the Klein-Dunham procedure, and Franck-Condon factors and r-centroids for the transition were computed.

Elander, N.↗
NASA NTRS2018

New Technologies Advancing Thermophysics

Researchers at NASA Ames in California have built a new facility that uses multiple 50-kW continuous wave lasers to add the capability for simulating radiative heating on thermal protection materials. The new facility, the Laser Enhanced Arc-jet Facility (LEAF-Lite), was added to NASA Ames’s Interaction Heating Facility arc-jet and now allows for test articles to be heated by both convective and radiative heat flux, making the facility more like flight. Using this new system, researchers can now simulate radiant heating with the laser and convective heating with the arc-jet simultaneously on a single test article. During its initial test in October 2017, the lasers radiatively heated a 6” x 6” Avcoat wedge sample to 405 W/sq.cm while the arc-jet simultaneously provided 160 W/sq.cm of convective heat, resulting in a total heat flux of 565 W/sq.cm. Radiative heating is more prevalent in missions with higher atmospheric entry speeds like the Orion space capsule or interplanetary scientific probes. Later this year, scientists will expand the spot size to cover 17” x 17” to test an Orion TPS panel.

Brandis, Aaron↗
DOE OSTI2022

Memory and CPU efficient coherent mode decomposition of partially coherent synchrotron radiation with subtraction of common quadratic phase terms

Application examples of a memory and CPU efficient coherent mode decomposition (CMD) method for wave-optics based simulation of the partially coherent undulator radiation propagation through a hard X-ray beamline in a 3rd generation synchrotron radiation source are presented. The high efficiency of the method is achieved thanks to the analytical treatment of the common quadratic phase terms that are developed in the phase of cross-spectral density (CSD) of partially coherent radiation at a distance from source. This treatment allows for a considerable, several orders of magnitude, reduction of the 4D CSD mesh density (and the memory occupied by the CSD) required for ensuring sufficient accuracies of wavefront propagation simulations with the modes produced by the CMD at a beamline entrance. This method, implemented in the “Synchrotron Radiation Workshop” open-source software, dramatically increases the feasibility of the CMD of 4D CSD for producing 2D coherent modes for a large variety of applications at storage rings and other types of radiation sources.

36 MATERIALS SCIENCE↗