SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Finding very low loss waveguides in the millimeter/submillimeter wave range has been a problem of considerabel interest for many years. Starting from fundamentals, we have found a new way to design a waveguide structure which is capable of providing an attenuation coefficient of less than 10dB/km for the guided dominant mode.
Properties of the Brewster angle and internal reflection in a dielectric prism are proposed as the basis of a new type of element for use in oversize waveguide in quasi-optical microwave components. Waveguide loss is reduced and precision broadband attenuators, phase shifters, and directional couplers can be constructed on the basis of the properties.
A matched waveguide termination was required as part of the noise temperature calibration facility in the receiving system at the Goonhilly earth-station. For routine measurement of overall system noise temperature, this termination is at ambient temperature. For other noise measurements, and in particular for the measurement of the effective input noise temperature of the maser, the waveguide termination is cooled to 77°K by immersion in liquid nitrogen.
Microwave analysis and measurements in study of reducing antenna noise by refrigerating waveguides and waveguide components
Mercury-doped germanium photodetector uses waveguide which increases the absorption of microwave energy within the photodetectors. Waveguide and photodetector are placed in liquid helium Dewar and cooled. A carbon dioxide laser is light source and klystron provides microwave energy. Measured response times are approximately 1 nanosecond.
Microwave power divider for providing variable output power to output waveguide in a fixed waveguide system.
Development of waveguide iris for microwave coupling applications using thin film techniques is discussed. Production process and installation of iris are described. Iris improves power transmission properties of waveguide window.
Description of the various major components useful in a 30- to 60-GHz varactor doubler circuit employing quasi-optical techniques. A description is given of the required directional filters, waveguide tuners, and varactor mounts. An attempt is made to determine the potential efficiency of various quasi-optical multiplier mounts and also to compare the efficiency obtainable by quasi-optical techniques with that achievable in standard-waveguide multiplier mounts.
Antenna systems for a Ku-band synchronous orbit communications satellite were considered. A multiple beam offset feed cluster used in conjunction with an offset parabolic reflector was chosen for the antenna realization. For radiating elements in the feed array, polyrod or dielectric rod radiators fed by waveguide are investigated. Polyrod antennas shrink the cross section of the waveguide required, are fairly directive, and can be tapered to reduce sidelobes. As a consequence, it is thought that mutual coupling effects between adjacent elements will be minimal and the resultant physically small elements will allow greater packing densities for the drive elements in the feed array than would otherwise be possible.
The mixer consists of a small metallic wafer, in which are embedded the semiconductor diodes, the waveguide mount is used to couple the diode wafer to the signal circuit, an RF tuning element, and a 3 mm coaxial connector for the IF output terminal. The cross-sectional dimension is that of the waveguide flange (19 mm x 19 mm, 0.75" x 0.75"), the overall length is nominally 25 mm (1.0 inch). This component is to be used as a single-ended RF mixer with four replacement mixer diodes, operating in the three millimeter wavelength band.
The test results of combustor noise measurements taken with waveguide probes are presented. Waveguide probes were shown to be a viable measurement technique for determining high sound pressure level broadband noise. A total of six full-scale annular combustors were tested and included the three advanced combustor designs: swirl-can, radial/axial, and double annular.
Corrugated, conical horn, ring-loaded antenna can be fed through vertex of cone with wideband waveguides, such as double-ridged rectangular or quad-ridged circular, or simply ring-loaded, corrugated waveguides. Antenna is also fed through coupling apertures in side of cone at appropriate diameters.
A preliminary meteorological radar facility (MRF) array design was completed in support of the slot conductance measurement program. Three different slot measurement techniques were evaluated. The selection of the probe comparison measurement technique was selected as the principal experimental method with the impedance measurement technique chosen to measure a few higher conductance slots to be used as reference slots. The impedance of 43 slots in 0.9 x 0.4 inch standard waveguide and of 40 slots in 0.835 x 0.4 inch waveguide was measured. Also, impedance measurements were made of a few slots using image planes to simulate mutual coupling effects. The measured and theoretical conductance, susceptance, and radiation phase data are presented in graphic form as a function of slot displacement for constant slot length, and of slot length for constant slot displacement. It is concluded that the proposed MRF array design approach is a feasible one.
Aspheric shaping of geodesic lenses in optical waveguides is suggested as a means for correcting spherical aberrations. The technique is complementary to the method of Spiller and Harper, in which geodesic lens aberrations are reduced by thickening the waveguiding layer in the lens region. The properties of a family of oblate-spheroidal lenses with no third-order spherical aberrations are described theoretically. Diffraction-limited performance over apertures up to one-half the full lens aperture is predicted for lenses with true f/numbers (focal length divided by useful aperture) in the range 2-12. By combining spheroidal-shaping and mode-index correction techniques, geodesic lenses free from both third- and fifth-order aberrations can be designed. These lenses show diffraction-limited performance over apertures of a centimeter or more when true f/numbers are in the range 1.5-9.5.
The X-band feeds in the Deep Space Network were upgraded to include selectable polarization in time for the Voyager missions to the outer planets. The modified antenna feed has the following major items added: two circular waveguide rotary joints, drive motor and gear reducer, gear assembly, two microswitches, and a polarization control junction box. The overall length of the feed remains the same because circular waveguide spacing sections were designed into the original feed to readily permit such modifications. There is no significant increase in antenna noise temperature compared to the original feed.
A waveguide laser oscillator was designed and experimental measurements made of relationships among output power, pressure, pump power, pump frequency, cavity tuning, output beam pattern, and cavity mirror properties for various active gases. A waveguide regenerative amplifier was designed and gain measurements were made for various active gases. An external Fabry-Perot interferometer was fabricated and used for accurate wavelength determination and for measurements of the refractive indices of solids transparent in the far infrared. An electronic system was designed and constructed to provide an appropriate error signal for use in feedback control of pump frequency. Pump feedback from the FIR laser was decoupled using a vibrating mirror to phase modulate the pump signal.
Ultrasonic equipment and x-y recorder indicate where back side of joint is properly welded. Wire waveguide placed in groove at root of joint to be welded is fused when joint is adequately penetrated. Ultransonic signal moving down waveguide is reflected where guide is melted. Change in reflected-signal arrival time with change in weld-head position is nearly constant unless joint is incompletely penetrated. Method permits determination of penetration depth in preweld samples without opening vacuum chamber and sectioning weld. Technique is particularly valuable when back side of joint is inaccessible.
Several microwave systems for use in solar cell fabrication were developed and experimentally tested. The first system used a standing wave rectangular waveguide horn applicator. Satisfactory results were achieved with this system for impedance matching and wafer surface heating uniformity. The second system utilized a resonant TM sub 011 mode cylindrical cavity but could not be employed due to its poor energy coupling efficiency. The third and fourth microwave systems utilized a circular waveguide operating in the TM sub 01 and TM sub 11 but had problems with impedance matching, efficiency, and field uniformity.