SEARCH · Engineering Papers

Results for “Visual Examination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Atomic-scale visualization of defect-induced localized vibrations in GaN

Phonon engineering is crucial for thermal management in GaN-based power devices, where phonon-defect interactions limit performance. However, detecting nanoscale phonon transport constrained by III-nitride defects is challenging due to limited spatial resolution. Here, we used advanced scanning transmission electron microscopy and electron energy loss spectroscopy to examine vibrational modes in a prismatic stacking fault in GaN. By comparing experimental results with ab initio calculations, we identified three types of defect-derived modes: localized defect modes, a confined bulk mode, and a fully extended mode. Additionally, the PSF exhibits a smaller phonon energy gap and lower acoustic sound speeds than defect-free GaN, suggesting reduced thermal conductivity. Our study elucidates the vibrational behavior of a GaN defect via advanced characterization methods and highlights properties that may affect thermal behavior.

36 MATERIALS SCIENCE↗

NASA NTRS1978

A study of the absorption-line spectra of six high-redshift quasi-stellar objects

High-resolution spectrograms of six QSOs with apparent visual magnitudes of 17.0 to 18.5 and redshifts greater than 2 are studied for absorption lines. Accurate wavelengths are measured for all the absorption lines that could be detected, attempts are made to identify redshift systems, and the redshifts in each object are examined. Analysis of the absorption-line spectra shows that: (1) a large number of redshifts covering a wide range of values are present in five of the QSOs; (2) about two-thirds of the absorption lines remain unidentified, cannot be of Galactic origin, and are not associated with existing redshift systems; (3) many comparatively small absorption redshifts exist which, if they are due to intervening galaxies, must be produced by very large halos; and (4) in one QSO there is a possible redshift system containing five lines with an absorption redshift that is significantly greater than the emission redshift.

Roberts, D. H.↗

NASA NTRS1981

Holographic flow visualization at the Langley Expansion Tube

A holographic system used for flow visualization at the Langley Expansion Tube is described. A ruby laser which can be singly or doubly pulsed during the short run time of less than 300 microns is used as the light source. With holography, sensitivity adjustments can be optimized after a run instead of before a run as with conventional flow visualization techniques. This results in an increased reliability of the flow visualization available for the study of real-gas effects on flow about models. Holographic techniques such as single-plate schlieren and shadowgraph, two plate interferometry, double pulse interferometry for perfect infinite-fringe interferograms, and double-pulse interferometry used to examine changes in the flow over a short time period are described and examples presented.

Goad, W. K.↗

NASA NTRS1993

Design of a reading test for low vision image warping

NASA and the University of Houston College of Optometry are examining the efficacy of image warping as a possible prosthesis for at least two forms of low vision - maculopathy and retinitis pigmentosa. Before incurring the expense of reducing the concept to practice, one would wish to have confidence that a worthwhile improvement in visual function would result. NASA's Programmable Remapper (PR) can warp an input image onto arbitrary geometric coordinate systems at full video rate, and it has recently been upgraded to accept computer-generated video text. We have integrated the Remapper with an SRI eye tracker to simulate visual malfunction in normal observers. A reading performance test has been developed to determine if the proposed warpings yield an increase in visual function; i.e., reading speed. We will describe the preliminary experimental results of this reading test with a simulated central field defect with and without remapped images.

Loshin, David S.↗

NASA NTRS2004

Plate Scattering Visualization: Images, Near Fields, Currents, and Far Field Patterns

This paper presents a case study of a simple yet robust target for demonstration of the EM visualization process. A five lambda square plate exhibits many scattering mechanisms depending on excitation angle and polarization: specular scattering, leading and trailing edge diffraction, traveling wave, and edge wave scattering. Bistatic k space radiation images, currents maps, and near scattered / total fields are examined for each of these scattering mechanisms.

Shaeffer, John↗

NASA NTRS2006

Automated, on-board terrain analysis for precision landings

Advances in space robotics technology hinge to a large extent upon the development and deployment of sophisticated new vision-based methods for automated in-space mission operations and scientific survey. To this end, we have developed a new concept for automated terrain analysis that is based upon a generic image enhancement platform|multi-scale retinex (MSR) and visual servo (VS) processing. This pre-conditioning with the MSR and the vs produces a "canonical" visual representation that is largely independent of lighting variations, and exposure errors. Enhanced imagery is then processed with a biologically inspired two-channel edge detection process, followed by a smoothness based criteria for image segmentation. Landing sites can be automatically determined by examining the results of the smoothness-based segmentation which shows those areas in the image that surpass a minimum degree of smoothness. Though the msr has proven to be a very strong enhancement engine, the other elements of the approach|the vs, terrain map generation, and smoothness-based segmentation|are in early stages of development. Experimental results on data from the Mars Global Surveyor show that the imagery can be processed to automatically obtain smooth landing sites. In this paper, we describe the method used to obtain these landing sites, and also examine the smoothness criteria in terms of the imager and scene characteristics. Several examples of applying this method to simulated and real imagery are shown.

Rahman, Zia-ur↗

NASA NTRS2006

Automated On-board Terrain Analysis for Precision Landings

Advances in space robotics technology hinge to a large extent upon the development and deployment of sophisticated new vision-based methods for automated in-space mission operations and scientific survey. To this end, we have developed a new concept for automated terrain analysis that is based upon a generic image enhancement platform-multi-scale Retinex (MSR) and visual servo (VS) processing. This pre-conditioning with the MSR and the VS produces a "canonical" visual representation that is largely independent of lighting variations, and exposure errors. Enhanced imagery is then processed with a biologically inspired two-channel edge detection process, followed by a smoothness based criteria for image segmentation. Landing sites can be automatically determined by examining the results of the smoothness-based segmentation which shows those areas in the image that surpass a minimum degree of smoothness. Though the MSR has proven to be a very strong enhancement engine, the other elements of the approach, the VS, terrain map generation, and smoothness-based segmentation, are in early stages of development. Experimental results on data from the Mars Global Surveyor show that the imagery can be processed to automatically obtain smooth landing sites. In this paper, we describe the method used to obtain these landing sites, and also examine the smoothness criteria in terms of the imager and scene characteristics. Several examples of applying this method to simulated and real imagery are shown.

Rahman, Zia-ur↗

NASA NTRS2001

Effects of Normal Aging on Visuo-Motor Plasticity

Normal aging is associated with declines in neurologic function. Uncompensated visual and vestibular problems may have dire consequences including dangerous falls. Visuomotor plasticity is a form of behavioral neural plasticity which is important in the process of adapting to visual or vestibular alteration, including those changes due to pathology, pharmacotherapy, surgery or even entry into a microgravity or underwater environment. In order to determine the effects of aging on visuomotor plasticity, we chose the simple and easily measured paradigm of visual-motor re-arrangement created by using visual displacement prisms while throwing small balls at a target. Subjects threw balls before, during and after wearing a set of prisms which displace the visual scene by twenty degrees to the right. Data obtained during adaptation were modeled using multilevel analyses for 73 subjects aged 20 to 80 years. We found no statistically significant difference in measures of visuomotor plasticity with advancing age. Further studies are underway examining variable practice training as a potential mechanism for enhancing this form of behavioral neural plasticity.

Roller, Carrie A.↗

NASA NTRS1978

Advanced designs for fluid flow visualization

Research was carried out on existing and new designs for minimally intrusive measurement of flow fields in the Geophysical Fluid Flow Cell and the proposed Atmospheric General Circulation Experiment. The following topics are discussed: (1) identification and removal of foreign particles, (2) search for higher dielectric photochromic solutions, (3) selection of uv light source, (4) analysis of refractive techniques and (5) examination of fresnel lens applicability.

Source record↗

NASA NTRSDate not supplied

"Giovanni at 20: Consistency and Persistency in Making Earth Remote Sensing Data Available (and Useful) to the Earth Science Community"

Since its creation in the year 2000, the NASA Geospatial Interactive Online Visualization ANd aNalysis Infrastructure (Giovanni) has been an exemplar of how to provide remotely-sensed satellite data and related Earth science datasets to a broad and globally diverse researcher community. One of the hallmarks of Giovanni system usage is that it is common to see practitioners of many branches of science – particularly those in fields not traditionally associated with remote-sensing data, such as animal behavior and paleooceanography – both accessing and employing datasets which the system provides. This usage pattern is attested to by the diversity of published science citing Giovanni. Giovanni has evolved through several versions, each of which increased analytical and visualization options while also enhancing ease-of-use. Information resources supporting Giovanni from the Goddard Earth Sciences Data and Information Services Center (GES DISC), which hosts the system, start with basic mapping and plotting functions and extend to “How-to” recipes demonstrating interusability with other data analysis systems and software. Giovanni is now being developed for use in a cloud environment, potentially expanding datasets the system can be applied to, and also improving performance for data having high spatial and temporal resolution. This presentation covers the system’s historical success with interesting examples of Giovanni-citing research, and will apply its current capabilities to a multi-dataset examination of derecho events associated with mesoscale convective phenomena in the summer of 2020, indicating how Giovanni is prepared for ongoing support of Earth science in a changing world.

Giovanni Derecho visualization↗

DOE OSTI2021

Multiscale X-ray phase contrast imaging of human cartilage for investigating osteoarthritis formation

The evolution of cartilage degeneration is still not fully understood, partly due to its thinness, low radio-opacity and therefore lack of adequately resolving imaging techniques. X-ray phase-contrast imaging (X-PCI) offers increased sensitivity with respect to standard radiography and CT allowing an enhanced visibility of adjoining, low density structures with an almost histological image resolution. This study examined the feasibility of X-PCI for high-resolution (sub-) micrometer analysis of different stages in tissue degeneration of human cartilage samples and compare it to histology and transmission electron microscopy. Ten 10%-formalin preserved healthy and moderately degenerated osteochondral samples, post-mortem extracted from human knee joints, were examined using four different X-PCI tomographic set-ups using synchrotron radiation the European Synchrotron Radiation Facility (France) and the Swiss Light Source (Switzerland). Volumetric datasets were acquired with voxel sizes between 0.7 × 0.7 × 0.7 and 0.1 × 0.1 × 0.1 µm 3 . Data were reconstructed by a filtered back-projection algorithm, post-processed by ImageJ, the WEKA machine learning pixel classification tool and VGStudio max. For correlation, osteochondral samples were processed for histology and transmission electron microscopy. X-PCI provides a three-dimensional visualization of healthy and moderately degenerated cartilage samples down to a (sub-)cellular level with good correlation to histologic and transmission electron microscopy images. X-PCI is able to resolve the three layers and the architectural organization of cartilage including changes in chondrocyte cell morphology, chondrocyte subgroup distribution and (re-)organization as well as its subtle matrix structures. X-PCI captures comprehensive cartilage tissue transformation in its environment and might serve as a tissue-preserving, staining-free and volumetric virtual histology tool for examining and chronicling cartilage behavior in basic research/laboratory experiments of cartilage disease evolution.

3D analysis↗

DOE OSTI2024

Direct observation of a magnetic-field-induced Wigner crystal

Wigner predicted that when the Coulomb interactions between electrons become much stronger than their kinetic energy, electrons crystallize into a closely packed lattice. A variety of two-dimensional systems have shown evidence for Wigner crystals (WCs). However, a spontaneously formed classical or quantum WC has never been directly visualized. Neither the identification of the WC symmetry nor direct investigation of its melting has been accomplished. Here we use high-resolution scanning tunnelling microscopy measurements to directly image a magnetic-field-induced electron WC in Bernal-stacked bilayer graphene and examine its structural properties as a function of electron density, magnetic field and temperature. At high fields and the lowest temperature, we observe a triangular lattice electron WC in the lowest Landau level. The WC possesses the expected lattice constant and is robust between filling factor ν ≈ 0.13 and ν ≈ 0.38 except near fillings where it competes with fractional quantum Hall states. Increasing the density or temperature results in the melting of the WC into a liquid phase that is isotropic but has a modulated structure characterized by the Bragg wavevector of the WC. At low magnetic fields, the WC unexpectedly transitions into an anisotropic stripe phase, which has been commonly anticipated to form in higher Landau levels. Furthermore, analysis of individual lattice sites shows signatures that may be related to the quantum zero-point motion of electrons in the WC lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

Machine-learning-assisted analysis of transition metal dichalcogenide thin-film growth

In situ reflective high-energy electron diffraction (RHEED) is widely used to monitor the surface crystalline state during thin-film growth by molecular beam epitaxy (MBE) and pulsed laser deposition. With the recent development of machine learning (ML), ML-assisted analysis of RHEED videos aids in interpreting the complete RHEED data of oxide thin films. The quantitative analysis of RHEED data allows us to characterize and categorize the growth modes step by step, and extract hidden knowledge of the epitaxial film growth process. In this study, we employed the ML-assisted RHEED analysis method to investigate the growth of 2D thin films of transition metal dichalcogenides (ReSe2) on graphene substrates by MBE. Principal component analysis (PCA) and K-means clustering were used to separate statistically important patterns and visualize the trend of pattern evolution without any notable loss of information. Using the modified PCA, we could monitor the diffraction intensity of solely the ReSe2 layers by filtering out the substrate contribution. These findings demonstrate that ML analysis can be successfully employed to examine and understand the film-growth dynamics of 2D materials. Further, the ML-based method can pave the way for the development of advanced real-time monitoring and autonomous material synthesis techniques.

36 MATERIALS SCIENCE↗

NASA NTRS1976

On the white dwarf HZ 43 as an extreme-ultraviolet source

It is confirmed by atmospheric modeling that both the visual continuum and the XUV spectrum (60 to 600 A) of HZ 43 can be fitted self-consistently with the emergent flux from a stellar atmosphere having an effective temperature of about 125,000 K and log g of at least 7. An examination of theoretical white-dwarf cooling sequences and estimates of the stellar luminosity indicate that the parameters of HZ 43 are consistent with a hot white dwarf of 0.6 to 1.2 solar masses. The age is estimated to be as short as 100,000 years, raising the possibility that the star may have ejected a planetary nebula or may be surrounded by an expanding H II region. It is concluded that the detection of a planetary nebula shell or an H II region around HZ 43 may provide an astrophysical test of the direct neutrino-electron interaction.

Durisen, R. H.↗

NASA NTRS1986

Spatial and temporal variability of infrared-observable properties of the Jovian atmosphere: A partial survey

Examination of infrared characteristics of the Jovian atmosphere are made using Voyager IRIS mapping from 1979, groud based scanning from 1979-1983, and ground based mapping from 1983 to the present. In general, there is a strong correlation between tropospheric thermal properties and the visual cloud albedo for all observations. The Voyager IRIS maps show no strong evidence for day/night differences. Temperature differences diminish with depth in the troposphere. Temporal changes over several weeks indicate a high correlation between thermal and visual properties, although no changes in the distribution of para H2 and ortho H2 are seen. Stratospheric banded organization is different from the troposphere, and there is a temperature enhancement near the north magnetic pole. The spatial distributions of ammonia gas and ammonia ice absorption are different. Stratospheric temperatures exhibit seasonal hemispheric asymmetry. Other temperature changes at and below the 150-mb level correlate with changes in the Jovian visual structure. The stratospheric temperature field is uncorrelated with visual features or temperatures below the 150-mb level. Elevated temperatures are observed near both north and south magnetic pole positions. Both the meridional positions and the relative intensities of stratospheric banded organization change significantly, especially after 1982. Ground based mapping confirms a correlation between temperatures and various measures of cloud distribution. Complex and unexpected characteristics are observed in the stratospheric temperature field; these include dramatic temporal changes on short time scales.

Orton, Glenn S.↗

NASA NTRS1990

Computer graphics aid mission operations

The application of computer graphics techniques in NASA space missions is reviewed. Telemetric monitoring of the Space Shuttle and its components is discussed, noting the use of computer graphics for real-time visualization problems in the retrieval and repair of the Solar Maximum Mission. The use of the world map display for determining a spacecraft's location above the earth and the problem of verifying the relative position and orientation of spacecraft to celestial bodies are examined. The Flight Dynamics/STS Three-dimensional Monitoring System and the Trajectroy Computations and Orbital Products System world map display are described, emphasizing Space Shuttle applications. Also, consideration is given to the development of monitoring systems such as the Shuttle Payloads Mission Monitoring System and the Attitude Heads-Up Display and the use of the NASA-Goddard Two-dimensional Graphics Monitoring System during Shuttle missions and to support the Hubble Space Telescope.

Jeletic, James F.↗

NASA NTRS1991

Three-dimensional tracking with misalignment between display and control axes

Consideration is given to experiments for examining 3D pursuit tracking when operators of teleoperation simulations are faced with misalignment between the display and control frames of reference. It is concluded that manual 3D pursuit tracking errors produced by display-control rotational misalignments have two linearly separable components: a purely visual component and a visual-motor component. Both components may independently influence the tracking performance. Human subjects can simultaneously adapt to a variety of display-control misalignments if position control during pursuit tracking is used with a simulation update rate of at least 30 Hz. This capability will enable trained operators to quickly adapt to changes in the position and orientation of viewing cameras during teleoperation and telemanipulation.

Ellis, Stephen R.↗

DOE OSTI2025

Visualization of Hemispherical Post‐Detonation Fireball Internal Structures

Hemispherical charges are initiated above a transparent plate in a half‐plane configuration, allowing optical access to the internal regions of the luminous fireball. High‐speed visualization enables characterization of the internal luminous structure, showing clearly the bright shell and dark core regions. Spectroscopic and pyrometric diagnostics are applied to these flows, generating quantitative information on the spatial distribution of temperature inside the fireball. Both cased and uncased charges can be examined using this methodology, and several different high explosives are tested. This approach can be useful in validation of detailed explosive fireball models. Initial comparisons with such models are presented.

detonation↗