Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “USe”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Assessing Reliability of NDE Flaw Detection Using Smaller Number of Demonstration Data Points

The paper provides an engineering analysis approach for assessing reliability of NDE flaw detection using smaller number of demonstration data points. It explores dependence of probability of detection (POD), probability of false positive (POF), on contrast-to-noise ratio, and net decision threshold-to-noise ratio in a simulated data; and draws some generically applicable inferences to devise the approach. ASTM nondestructive evaluation standards provide requirements on signal-to-noise ratio and/or contrast-to-noise ratio in order to provide reliable flaw detection and limit false positive calls. POD analysis of inspection test data results in an estimated flaw size, denoted by 𝑎90/95. This flaw size has 90% POD and minimum 95% confidence. POF is also estimated in the analysis. POD demonstration requires specimens with flaws of known size. In many situations, it is very expensive to produce the large number of flaws required for the POD analysis. In some situations, only real flaws can truly represent the flaws for demonstration. Real flaws of correct size and location in part configuration specimen may be difficult to produce, if not impossible. Here, an engineering analysis approach is devised using simulation to assess reliability of NDE technique when a limited number of flaws are available for demonstration. In this simulation, a technique is considered reliable, if it provides flaw detectability size equal to or better than the theoretical 𝑎90𝑡ℎ used in simulation and also provides a POF less than or equal to a chosen value. The paper uses simulated signal response versus flaw size data to devise the approach. Linear correlation is used between the signal response data and flaw size. POD software mh1823 uses generalized linear model (GLM) in POD analysis after transforming the flaw size and signal response, if needed, using logarithm. Therefore, this approach is in agreement with the linear signal correlation used in mh1823. Using the POD analysis of data, generic conditions on contrast-to-noise ratio and net decision threshold-to-noise ratio are derived for reliable flaw detection. In order to assess technique reliability using the engineering approach, signal response-to-flaw size correlation about the flaw size of concern is needed. In addition, measurement of noise is also needed. If the technique meets the above requirements, assumption of linear signal-to-flaw size correlation and conditions on noise, then the technique can be assessed using this analysis as it fits the underlying POD model used here. The approach is conservative and is designed to provide a larger flaw size compared to the POD approach. Such NDE technique assessment approach, although, not as rigorous as POD, can be cost effective if the larger flaw size can be tolerated. Typically, this is a situation for all quality control NDE inspections. Here, an NDE technique needs to be reliable and 𝑎90/95 is not estimated, but the assessed flaw size is assumed to be larger than the unknown a90 due to conservative factors or margins. Applicability of the approach for assessing reliability of flaw detection in x-ray radiography and 2D imaging in general is also explored.

Koshti, Ajay M.↗
NASA NTRS2019

3+2+X: What Is the Most Useful Depolarization Input for Inverting Lidar Measurements of Non-Spherical Particles to Microphysical Properties?

The typical multiwavelength aerosol lidar data set for inversion of optical to microphysical parameters is composed of three backscatter coefficients (β ) at 355, 532, and 1064 nm and two extinction coefficients (α ) at 355 and 532 nm. This data combination is referred to as 3β +2α or 3+2 data set. This set of data is sufficient for retrieving some important microphysical particle parameters if the particles have spherical shape. Here, we investigate the effect of including the particle linear depolarization ratio (δ) as a third input parameter to the inversion of lidar data. The inversion algorithm is generally not used if measurements show values of δ that exceed 0.10 at 532 nm, i.e. in the presence of non-spherical particles such as desert dust, volcanic ash, and under special circumstances biomass-burning smoke.We use experimental data collected with instruments that are capable of measuring δ at all three lidar wavelengths with an inversion routine that uses the theory of light scattering by randomly oriented spheroids to replicate scattering properties of non-spherical particles. This is the first systematic test of the effect of using all theoretically possible combinations of δ taken at 355, 532, and 1064 nm as input in the lidar data inversion. We find that depolarization information at least at one wavelength already provides useful information in the in version of optical data that describe light-scattering by nonspherical particles. However, any choice of δ(λ) will give lower values of the single-scattering albedo than the traditional 3+2 data set. We find that input data sets that include 355 give a non-spherical fraction that closely resembles the dust ratio we obtain from using β(532) and δ(532) in a methodology applied in aerosol-type separation. The use of 355 in data sets of two or three reduces the fraction of non-spherical particles that is retrieved when using δ(532) and δ(1064). Use of the latter two without accounting for 355 generally leads to high fractions of non-spherical particles that we consider not trustworthy. The use of three δ(λ) instead of two δ(λ) including the constraint that one of these is measured at 355 nm does not provide any advantage over using 3+2+δ(355). Because of the technical challenges involved with accurately measuring δ(1064) we conclude that — depending on measurement capability — the future standard input for inversion using spheroid kernels might be 3+2+δ(355) or 3+2+δ(355)+δ(532).

Tesche, M.↗
NASA NTRSDate not supplied

Variance Decomposition of MEDLI2 Reconstructed Heating Using Neural Networks

The Mars Entry, Descent, and Landing Instrumentation (MEDLI2) sensor suite collected data during entry of the Mars 2020 Perseverance rover into Mars’ atmosphere. This suite included a network of MEDLI2 Instrumented Sensor Plugs (MISPs). Each MISP was comprised of a cylinder made of Thermal Protection System (TPS) material with 1-3 embedded thermocouples (TCs), and it was flush mounted into the heatshield or backshell. Data from these in-depth TCs were used to reconstruct the aeroheating environment of the vehicle throughout entry. Surface heating was posed as an inverse problem, with the goal of estimating the surface heating by minimizing an objective function of the difference between MISP temperature measurements during flight and the temperature predictions derived from the Fully Implicit Ablation and Thermal response (FIAT) program. Given an aerothermal environment, FIAT calculates the material response and provides in-depth temperatures throughout the TPS material. To achieve the reverse, an internal tool called FIAT_Opt runs through multiple different environments until the output temperature at the TC depth closely matches the flight data. 95% confidence intervals on the reconstructed surface heating were obtained using Monte Carlo analysis, in which uncertainties in the thermocouple depth and the TPS material properties (e.g., density, thermal conductivity, heat capacity, emissivity) based on flight-lot material testing were included. A variance decomposition method using Sobol indices was employed to assess the sensitivity of the reconstructed peak heating to the TC placement and material property uncertainties. Variance decomposition was found to require tens of thousands of FIAT_Opt runs in order for the Sobol indices to converge. With a single FIAT_Opt run taking on the order of 40 minutes, the required number of computations would take months to complete, even if using multiple CPUs. To mitigate this problem, three machine learning models (ridge regression with cross-validation, random forest regression, and a deep neural network) were trained and tested using the 2000 Monte Carlo runs that were already completed. A subset of 1600 runs were used to train the model (i.e., training set), while the remaining 400 runs were used as the test set. The predictions from the deep neural network (DNN) on the test set showed nearly perfect agreement to the actual values computed with FIAT_Opt (R2 > 0.99). Using the DNN as a surrogate model, the variance decomposition using 50,000 runs was completed within minutes. The resulting Sobol indices showed that the reconstructed peak surface heating was most sensitive to the uncertainties in the thermal conductivity (ST = 0.37) and heat capacity (ST = 0.26). This method can be leveraged to provide requirements for material property measurements needed to improve the accuracy of surface heating prediction and ultimately lead to the reduction of design margins in the future. This presentation will include background on the MEDLI2 suite; the method used for inverse heating estimation; the way that material property uncertainties were accounted for using Monte Carlo analysis; a brief background on variance decomposition; the motivation for using machine learning in this context; how a neural network was trained on the data to enable variance decomposition in a fraction of the time; and the variance decomposition results for one of the MISPs.

Hannah Alpert↗
NASA NTRSDate not supplied

Using Machine Learning to Infer Material Properties of Debris Fragments from X-ray Images in the DebriSat Project

The DebriSat project is a collaboration effort with the NASA Orbital Debris Program Office, the U.S. Space Force Space Systems Command Center, The Aerospace Corporation, and the University of Florida. To date, over 200,000 fragments from this ground-based, hypervelocity impact experiment have been collected, and processing is underway to determine their physical characteristics, such as material, shape, color, characteristic length, and average cross-sectional area. The x-ray process is primarily used to identify the location of the fragments and estimated size for extraction, so that these physical characteristics can be assessed. This paper proposes a machine learning-based approach to characterize materials from x-ray images of debris fragments embedded in soft-catch foam used in the DebriSat project. The novel methodology discussed in this paper will highlight the use of x-ray imagery data to characterize these fragments without extraction or a human-in-the-loop. Both supervised and unsupervised machine learning techniques are utilized with this approach to infer the physical parameters of the fragments embedded in the soft-catch foam panels used in the impact experiment based on x-ray images of the foam panels. Additionally, 3D reconstructions of the extracted fragments are created with images taken from two different angles using the structure from motion (SfM) method. The characteristic lengths and shape from the 3D reconstruction, alongside the physical characteristics of the debris, are used in the inference of the material type. To develop and test the approach, a dataset of x-ray images of debris fragments of varying sizes and materials is collected. Supervised learning methods such as convolutional neural networks (CNNs), support vector machines (SVM), decision trees, and random forest classifiers are used due to the high-dimensional feature spaces of the debris and nonlinear decision boundaries for material categorization. Given the limited pre-labeled data of embedded debris materials smaller than 10 mm, unsupervised machine learning techniques such as clustering algorithms and autoencoders are used, in addition to supervised learning methods. The clustering algorithms group similar fragments together based on their physical properties, and autoencoders reduce the dimensionality of the x ray images and extract relevant features. The performance of the proposed approach's is analyzed using a range of statistical methods, including confusion matrices, receiver operating characteristic curves, and precision-recall curves. The results are compared with those obtained using a baseline approach that relies on manual identification and classification of debris fragments. To evaluate the effectiveness of different machine learning methods, statistical tests such as t-tests, ANOVA, and cross-validation are performed, comparing the performance of CNNs, SVMs, clustering algorithms, and autoencoders. Additional analysis needs to be conducted to identify any sources of bias or variability that may affect the results, such as variations in imaging conditions or fragmentation patterns. Other topics explored are limitations, refinements, and the potential use of semi-supervised learning techniques, such as self-training to label unlabeled datasets and co-training using x-ray images taken from two different angles as two different models.

Saik Anam Siam↗
NASA NTRS2023

Using Machine Learning to Infer Material Properties of Debris Fragments from X-ray Images in the DebriSat Project

The DebriSat project is a collaboration effort with the NASA Orbital Debris Program Office, the U.S. Space Force Space Systems Command Center, The Aerospace Corporation, and the University of Florida. To date, over 200,000 fragments from this ground-based, hypervelocity impact experiment have been collected, and processing is underway to determine their physical characteristics, such as material, shape, color, characteristic length, and average cross-sectional area. The x-ray process is primarily used to identify the location of the fragments and estimated size for extraction, so that these physical characteristics can be assessed. This paper proposes a machine learning-based approach to characterize materials from x-ray images of debris fragments embedded in soft-catch foam used in the DebriSat project. The novel methodology discussed in this paper will highlight the use of x-ray imagery data to characterize these fragments without extraction or a human-in-the-loop. Both supervised and unsupervised machine learning techniques are utilized with this approach to infer the physical parameters of the fragments embedded in the soft-catch foam panels used in the impact experiment based on x-ray images of the foam panels. Additionally, 3D reconstructions of the extracted fragments are created with images taken from two different angles using the structure from motion (SfM) method. The characteristic lengths and shape from the 3D reconstruction, alongside the physical characteristics of the debris, are used in the inference of the material type. To develop and test the approach, a dataset of x-ray images of debris fragments of varying sizes and materials is collected. Supervised learning methods such as convolutional neural networks (CNNs), support vector machines (SVM), decision trees, and random forest classifiers are used due to the high-dimensional feature spaces of the debris and nonlinear decision boundaries for material categorization. Given the limited pre-labeled data of embedded debris materials smaller than 10 mm, unsupervised machine learning techniques such as clustering algorithms and autoencoders are used, in addition to supervised learning methods. The clustering algorithms group similar fragments together based on their physical properties, and autoencoders reduce the dimensionality of the x ray images and extract relevant features. The performance of the proposed approach's is analyzed using a range of statistical methods, including confusion matrices, receiver operating characteristic curves, and precision-recall curves. The results are compared with those obtained using a baseline approach that relies on manual identification and classification of debris fragments. To evaluate the effectiveness of different machine learning methods, statistical tests such as t-tests, ANOVA, and cross-validation are performed, comparing the performance of CNNs, SVMs, clustering algorithms, and autoencoders. Additional analysis needs to be conducted to identify any sources of bias or variability that may affect the results, such as variations in imaging conditions or fragmentation patterns. Other topics explored are limitations, refinements, and the potential use of semi-supervised learning techniques, such as self-training to label unlabeled datasets and co-training using x-ray images taken from two different angles as two different models.

Saik Anam Siam↗
NASA NTRSDate not supplied

Micrometer to Atomic Scale Characterisation of Primitive Astromaterials Using A Novel Method, Metis-Fa: A Coordinated Atom Probe Tomography, Transmission Electron Microscopy and NanoSIMS Approach

Introduction: Presolar grains preserve isotopic, chemical and microstructural records of physical and chemical processing, and formation mechanisms within a vast range of evolved stellar systems, the interstellar medium, solar nebula and their parent bodies. These evolutionary records are preserved at the micrometric to atomic scale, requiring coordinated studies to expand our understanding of evolutionary processes occurringthroughout ours and external stellar systems [1]. NanoSIMS enabled rapid in situ identification and isotopic characterisation of presolar grains and their stellar origins using 17O/16O and 18O/16O, and 13C/12C isotopic ratios [1]. Coordination with transmission electron microscopy (TEM) revealed crystallographic and localised contextual relationships and quantitively constrained their major and minor compositions [1]. However, trace elements cannot be quantified, the most sensitive geochemical tracers of environmental conditions, essential to unravelling the chemical record of their evolutionary pathway and parent stellar systems [2-3] . Furthermore, owing to the combination of technical limitations (only 5 – 7 isotopes can be measured per NanoSIMS run) and their small grain sizes of 100 nm < 3 μm (with rare exceptions in nanodiamonds (2 nm ≤) and SiC (< 40 μm)), the number of measurable isotopes per grain volume is limited [1,3] . Through more comprehensive isotopic studies of presolar grains, NanoSIMS studies have shown the importance of the latter, identifying Fe and Mg as important indicators of nuclear synthetic processing and their stellar origins, respectively [4- 5]. Coordination of NanoSIMS and Atom Probe Tomography (APT) revealed morphological signatures, and isotopic and chemical signatures at major to trace levels without requirements for preselection of elements [6]. However, crystallographic signatures in localized contextual relationships cannot be measured. Consequently, coordination of NanoSIMS, TEM and APT is essential to gain access to almost all contextual, structural and geochemical signatures within each presolar grain.Transmission electron microscopy requires a 100 nm thin lamella which is unstable in APT and would not produce any viable data. Atom probe tomography requires a needle-shaped specimen which when measured in TEM removes the local context, impacts the quality of the TEM diffraction images due to the shank angle of the needle, and can alter the chemistry of beam sensitive materials from the higher degree of surface exposure at the tip. To address these issues, we developed METIS-Fa (Multi-technical measurements of Electron Transparent materials using an Indium Sandwich - a FIB approach). A novel method which enables coordination of NanoSIMS, TEM and APT for generalized and targeted studies of individual grains, including beam sensitive materials, without compromising sample preparation requirements for TEM and APT. This method requires only indium and a Focus Ion Beam (FIB), minimizing the movement of fragile materials while still enabling preparation of TEM lamella into APT needles. Samples: Initial experimental development and testing of the method occurred at Astromaterials Research and Exploration Science (ARES), Johnson Space Centre (JSC), NASA and APT measurements and needle preparation occurred at JdLC, Curtin University. Synthetic silicate samples were used as analogs for presolar silicates when performing a trial run of the method. Samples were extracted from a polished thin section created at JSC, NASA, comprised of 38 wt.% Si, 17 wt.% FeO, 13 wt.% MgO, 12 wt.% Al, 11 wt.% Ca based on electron microprobe analysis (EMPA) [8] . Experimental details, pressure and temperature conditions were presented in [8] and references therein. Testing of the capability to target individual grains in mineral matrices using this method for acquisition in APT, measured matrix regions in meteoritic thin sections of primitive meteorites. These meteorites and their identified presolar grains for future targeted studies are detailed in [9]. Techniques: The TEM-FIB lamella were prepared using a FIB. An e-beam assisted pt deposition was used as a protective coating for the synthetic and meteoritic samples. When targeting individual grains, a secondary e-beam assisted pt deposition button is placed over the desired grain before the protective coating to denote its location. A JEOL 2500SE field-emission TEM was used for high-resolution imaging, energy-dispersive X-ray (EDX) and electron diffraction data.TheMETIS-Fa method was experimentally designed, tested and executed using a FIB at ARES, JSCNASA. Needles for APT were prepared using the Tescan Lyra3 GM Dual Beam Focus Ion Beam (FIB) Field Emission SEM (FE-SEM) at the JdLC, Curtin University. Atom probe tomography measurements were conducted using a CAMECA Local Electrode Atom Probe, LEAP 4000X HR. Two pure indium needles were analyzed initially to constraining acquisition parameters and stability under the beam. Manual acquisition was required to maintain evaporation of specimen’s at the apex and monitor interactions with measurement parameters. Experimental Design: Indium foil is pressed onto an Al stub with a pneumatic press and mounted into the FIB adjacent to the TEM-FIB lamella of interest. Using a FIB, two indium slices (5 μm x ~300 nm x 3 μm) are extracted from indium foil and aligned with the TEM-FIB lamella before touching the TEM-FIB lamella. Each slice is then attached through cold welding to the FIB-TEM lamella. This approach eliminates the need for chemical treatments and proved effective for aligning the Indium within the region of interest for APT, holding it in place for up to 4 days during testing.Once both indium slices are attached within their pre-determined region per grain targeting requirements, they are gradually melted onto the FIB-TEM lamella.When targeting a specific grain, measurements should be taken of the pt button and its distance from edge to edge of the lamella before and after sandwiching. A secondary button should be placed over the same region after the Indium slices have been attached to improve precision when preparing APT needles. Results: Figure 1 shows two indium slices melted onto a FIB-TEM lamella, adding additional bulk for preparation into APT needles as shown in Figure 2 [7] . The latter was essential so samples could be measured in TEM and APT without compromising sample preparation requirements and consequently data quality and acquisition stability. METIS-Fa proved effective forimproving geometry. Figure 3 shows a successful APTrun of the synthetic silicate. EMPA, TEM and APTshowed no chemical alterations. During targetingtesting, a solar silicate grain was successfully identifiedand measured in TEM, and prepared into an APTneedle. However, the indium was melted too long during sample preparation, causing expansion andformation of internal porosity leading to sample loss.Conclusion: METIS-Fa greatly expands the number of isotopic and chemical signatures measured per grain volume, and enables measurements of contextual, structural, crystallographic, isotopic and geochemical signatures within individual grains. Gaining access to such a vast range of evolutionary signatures required for expanding our understanding of external stellar and planetary systems and the evolution of our solar system. This method was designed for application to a vast range of phases including being sensitive materials and thus provides a way for coordination of NanoSIMS, TEM and APT not just for the study of presolar grains and by extension primitive astromaterials, but studies in a vast range of other fields including the geosciences and material sciences.Acknowledgments: Thankyou to ARES, JSC, NASA; JdLC Curtin University and Space Science Technology Centre for the use of laboratory facilities and funding [confirm].

Nicole D Nevill↗
DOE OSTI2023

Towards POI-based large-scale land use modeling: spatial scale, semantic granularity, and geographic context

The combination of spatial distribution, semantic characteristics, and sometimes temporal dynamics of POIs inside a geographic region can capture its unique land use characteristics. Most previous studies on POI-based land use modeling research focused on one geographic region and select one spatial scale and semantic granularity for land use characterization. There is a lack of understanding on the impact of spatial scale, semantic granularity, and geographic context on POI-based land use modeling, particularly large-scale land use modeling. In this study, we developed a scalable POI-based land use modeling framework and examined the impact of these three factors on POI-based land use characterization using data from three geographic regions. We developed a unified semantic representation framework for POI semantics that can help fuse heterogeneous POI data sources. Then, by combining POIs with a neural network language model, we developed a spatially explicit approach to learn the embedding representation of POIs and AOIs. We trained multiple supervised classifiers using AOI embeddings as input features to predict AOI land use at different semantic granularities. The classification performance of different land use classes was analyzed and compared across three geographic regions to identify the semantic representativeness of POI-based AOI embedding and the impact of geographic context.

58 GEOSCIENCES↗
DOE OSTI2021

Use Attainability Analysis for Upper Sandia Canyon

This document presents a use attainability analysis (UAA) for the perennial segment of Upper Sandia Canyon, which is located within the Los Alamos National Laboratory (LANL) property near Los Alamos, New Mexico.1 This UAA is consistent with 20.6.4.15 New Mexico Administrative Code (NMAC) (New Mexico Environment Department [NMED] 2011c), which describes the perennial segment as “Sandia Canyon from Sigma Canyon upstream to LANL [National Pollutant Discharge Elimination System] NPDES outfall 001.” The perennial segment’s designated uses are coldwater aquatic life, livestock watering, wildlife habitat, and secondary contact. 40 Code of Federal Regulations (CFR) § 131.10(g) permits a state to remove a designated use that is not an existing use (as defined in 40 CFR §131.3), if a UAA demonstrates that naturally occurring pollutant concentrations prevent the attainment of the use or if physical conditions related to the natural features of the water body preclude the attainment of the aquatic life protection use. This UAA considers whether natural physical conditions in Upper Sandia Canyon, specifically air and/or water temperatures, prevent the designated aquatic life use water temperature limits (i.e., coldwater) from being attained in the perennial segment. The weight of evidence presented in this UAA supports the conclusion that, based on air-water temperature modeling and instream thermograph data, the coolwater aquatic life designated use is currently the attainable use. Accordingly, it is recommended that the coolwater aquatic life designated use replace the coldwater aquatic life designated use in the Upper Sandia Canyon assessment unit (AU).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Using dorsal surface for individual identification of dairy calves through 3D deep learning algorithms

Advances in machine learning techniques have allowed the development of computer vision systems (CVS) that can accurately predict several phenotypes of interest for livestock operations. In this context, 3D images taken from a top-down view are particularly useful for estimating body condition score, growth development, and body biometrics in cattle. Frequently, such CVS rely on identification (ID) systems, such as electronic tags, as a way to match animal ID and the predicted phenotype. However, the same 3D images used to predict body weight and other animal biometrics could be adopted for animal recognition as well. Such alternative would optimize CVS to recognize animal ID and monitor growth development simultaneously while leveraging the same hardware infrastructure. Furthermore, this strategy could be used to recognize animals with similar color patterns. Nonetheless, growing animals are continuously changing body shape, which could limit its use as an invariant feature for pattern recognition. Thus, the objectives of this study were: (1) to compare algorithms for different 3D object representations to identify individual animals; and (2) to evaluate how short-term changes in body shape due to animal growth affect the predictive performance of these algorithms. For objective 1, the algorithms were trained (n = 4,558) and tested (n = 1,139) using images from 38 Holstein calves. For objective 2, we designed three different experiments using images (n = 2,347) from five Holstein calves taken over six weeks during their growing period, always training and testing on different weeks. Each experiment evaluated how changing a different parameter of the image capturing procedure affected the predictive ability of the trained algorithms. In the first experiment, we varied the total number of images per animal in the training set; in the second experiment, we varied the number of weeks while keeping a fixed number of images in the training set; and in the third experiment, we skipped weeks between images in the training and test sets. The F 1 score for objective (1) was up to 0.804 when testing with the last frames of each video, and up to 0.959 when using random frames for testing. For objective (2), the F 1 score was up to 0.947 for the first experiment when using 130 images per animal; up to 0.979 for the second experiment when using all five weeks; and up to 0.917 when not skipping weeks between training and testing. In conclusion, these results show that deep learning algorithms can be used to identify individual animals through their dorsal area 3D surfaces, and, from our experiments using calves in their growing period, that they are robust enough to account for changes in body shape and size, making them a promising tool for animal recognition during growth.

3D neural networks↗
DOE OSTI2022

Strength of tantalum to 276 GPa determined by two x-ray diffraction techniques using diamond anvil cells

Tantalum (Ta) is a metal that has useful properties that make it useful in extreme environments. It is therefore important to understand how Ta performs in such extreme conditions by accurately measuring its properties. In this work, the yield strength of tantalum has been measured at pressures up to 276 GPa using axial and radial x-ray diffraction (XRD) methods in diamond anvil cells (DAC). We measured strength using XRD in a radial DAC to 50 GPa, in an axial DAC to 60 GPa using diamonds with standard flat culets, and in a final experiment to 276 GPa using toroidal diamond anvils. The radial XRD data were refined using the Material Analysis Using Diffraction (MAUD) Rietveld software package to extract lattice strain and the yield strength. The axial data were refined using the General Structure Analysis System (GSAS) II and a linewidth method was used to calculate the yield strength. The yield strength measured near ambient pressure was found to be 0.5 GPa and increased with pressure up to 50 GPa, where the yield strength plateaued at a value of 2.4 GPa. At pressures above 60 GPa, the strength increased again to a maximum value of 9 GPa at the highest pressure of 276 GPa. Here, the data from the three experiments show good agreement between the methods and previously reported experimental data. This agreement illustrates the value of axial diffraction data for material strength determination and allows for measurements at multihundreds of GPa using toroidal DACs.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Model Inputs, Outputs, and Scripts associated with: “Combined effects of stream hydrology and land use on basin-scale hyporheic zone denitrification in the Columbia River Basin”

This data package is associated with the publication “Combined effects of stream hydrology and land use on basin‐scale hyporheic zone denitrification in the Columbia River Basin”, published in Water Resource Research (Son et al.2022) available at https://doi.org/10.1029/2021WR031131. This data package includes the key model inputs/outputs of the river corridor model for the Columbia River Basin (CRB) and the model source codes used in the manuscript. The model is a carbon-nitrogen-coupled river corridor model (RCM), and the model is used to quantify hyporheic zone (HZ) denitrification at the NHDPLUS stream reach scales. The RCM used in this study combines empirical substrate models derived from observations and three microbially driven reactions, including two-step denitrification and aerobic respiration, are considered within the HZ. The key input data of the model are exchange flux, residence time, and stream solute (dissolved organic carbon (DOC), dissolved oxygen (DO), and nitrate concentrations). These inputs are constant over time and represent long-term averaged values. This study uses the RCM to explore the spatial patterns of HZ denitrification across reaches with different sizes and land use in the CRB. Our main objective is to use the RCM as a virtual reality model, and the machine-learning models as surrogates that encapsulate the complexities of the physics-based model while identifying the importance of different variables that are not evident in the model conceptualization. We do not include a direct comparison of the modeled HZ denitrification and measurements; however, the RCM can capture the overall spatial patterns of the HZ denitrification because the model inputs and its reaction networks are based on well-established theory and a physical-based model. The combination of the model-based predictions and a machine-learning approach (e.g., random forest) is used to improve our understanding of what variables of the model are associated with spatial patterns of the modeled denitrification across reaches with different sizes and land uses, and to develop a proxy model using measurable variables to reproduce the simulated patterns.This dataset contains five folders: (1) model_inputs, (2) model_outputs, (3) Rscripts, (4) figures, and (5) model_codes. It also contains a readme, file level metadata (FLMD), and data dictionary (dd). Please see the FLMD for a list of all the files contained in this data package and descriptions for each. The model_inputs folder contains the model inputs used to drive the model simulations. The model_outputs folder contains key model output files from the river corridor model. The Rscripts folder contains the Rscripts for pre- and post- processing model results. The figures folder contains the raw figures associated with the manuscript. The model_codes folder includes key model source codes/input files. All files are .jpg, .jpeg, .out, .e, .od, .dat, .sub, .F90, .0, .R, .sbx, .cpg, .sbn, .shx, .shp, .dbf, .prj, .tfw, .tif, .xml, .pdf, or .csv.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Model Data Archive for Manuscript Titled "Evaluation of a Coupled Surface–Subsurface Hydrologic Model Using Dense Water‑Level Sensors in a Mixed Urban–Rural Watershed"

This archive provides scripts, input files, and datasets used for the implementation and evaluation of a fully coupled surface–subsurface hydrologic model in the Neches River Basin, southeast Texas. The study uses the Advanced Terrestrial Simulator (ATS) to simulate coupled surface–subsurface hydrologic processes over a mixed urban–rural watershed and evaluates model performance using a dense network of 136 in situ water-level sensors, nine U.S. Geological Survey (USGS) stream gauges, and SSEBop-derived evapotranspiration estimates during the period October 2014–June 2024. The workflow is implemented primarily in Python 3 using the Watershed Workflow package. The Jupyter notebooks can be executed using open-source software such as Anaconda JupyterLab or Visual Studio Code. Other data files include TXT, CSV, XML, SHP, TIF, NetCDF, HDF5, and ExodusII files, which can be processed using the provided Python scripts. ATS input files are provided in XML format and can be edited using any commonly used text editor. This archive contains: *Scripts and input files used to generate the ATS model setup, including watershed discretization, mesh generation, parameter mapping, and model configuration. *Jupyter notebooks used for preprocessing observational data, evaluating streamflow, water levels, and evapotranspiration, computing performance metrics, and generating the figures presented in the manuscript. *ATS simulation outputs and processed observational datasets, including OneRain and DD6 water-level sensors, USGS streamflow observations, GIS data, and supporting spatial datasets used throughout the study.

Dense water-level sensor network↗
DOE OSTI2022

Optimization of Water-Alternating-CO2 Injection Field Operations Using a Machine-Learning-Assisted Workflow

Summary This paper will present a robust workflow to address multiobjective optimization (MOO) of carbon dioxide (CO2)-enhanced oil recovery (EOR)-sequestration projects with a large number of operational control parameters. Farnsworth unit (FWU) field, a mature oil reservoir undergoing CO2 alternating water injection (CO2-WAG) EOR, will be used as a field case to validate the proposed optimization protocol. The expected outcome of this work would be a repository of Pareto-optimal solutions of multiple objective functions, including oil recovery, carbon storage volume, and project economics. FWU’s numerical model is used to demonstrate the proposed optimization workflow. Because using MOO requires computationally intensive procedures, machine-learning-based proxies are introduced to substitute for the high-fidelity model, thus reducing the total computation overhead. The vector machine regression combined with the Gaussian kernel (Gaussian-SVR) is used to construct proxies. An iterative self-adjusting process prepares the training knowledge base to develop robust proxies and minimizes computational time. The proxies’ hyperparameters will be optimally designed using Bayesian optimization to achieve better generalization performance. Trained proxies will be coupled with multiobjective particle swarm Optimization (MOPSO) protocol to construct the Pareto-front solution repository. The outcomes of this workflow will be a repository containing Pareto-optimal solutions of multiple objectives considered in the CO2-WAG project. The proposed optimization workflow will be compared with another established methodology using a multilayer neural network (MLNN) to validate its feasibility in handling MOO with a large number of parameters to control. Optimization parameters used include operational variables that might be used to control the CO2-WAG process, such as the duration of the water/gas injection period, producer bottomhole pressure (BHP) control, and water injection rate of each well included in the numerical model. It is proved that the workflow coupling Gaussian-SVR proxies and the iterative self-adjusting protocol is more computationally efficient. The MOO process is made more rapid by squeezing the size of the required training knowledge base while maintaining the high accuracy of the optimized results. The outcomes of the optimization study show promising results in successfully establishing the solution repository considering multiple objective functions. Results are also verified by validating the Pareto fronts with simulation results using obtained optimized control parameters. The outcome from this work could provide field operators an opportunity to design a CO2-WAG project using as many inputs as possible from the reservoir models. The proposed work introduces a novel concept that couples Gaussian-SVR proxies with a self-adjusting protocol to increase the computational efficiency of the proposed workflow and to guarantee the high accuracy of the obtained optimized results. More importantly, the workflow can optimize a large number of control parameters used in a complex CO2-WAG process, which greatly extends its utility in solving large-scale MOO problems in various projects with similar desired outcomes.

Energy & Fuels↗
DOE OSTI2023

Rapid AI-based Dissection of Ashes using Raman and XRF Spectroscopy (RADAR-X)

Waste-to-energy (WTE) facilities incinerate ~35 million tons of municipal solid waste annually in the United States. The incineration process reduces the mass and the volume of the waste fraction by over 75 and 95%, respectively. The fraction left after incineration remains as ash residues and is referred to as WTE ash, compromising of bottom and fly ash. In the United States, ~10 million tons of WTE ashes are generated annually and predominantly landfilled because of the lack of secondary end-use pathways. This incurs a significant financial burden (landfilling costs) on U.S. WTE facilities and also results in the loss of materials to the landfill. The primary objective of this research is to understand better the elemental and mineralogical composition of WTE ashes from diverse origins and find composition dependent upcycling pathways for diverting these ashes from landfills. This primary objective was addressed through three research tasks –(Task I) An AI-led Multi-Modal Approach for Compositional Analysis, (Task II) Developing a Dissolution-Based Test for Real Time Analysis, and (Task III) Establishing composition-dependent end uses. The chemical composition of WTE ash is dependent on two factors, i.e., the input waste composition and the operational parameters of a WTE facility (combustion conditions). Amongst these two factors, the input waste composition will likely show spatial and temporal variation. As a result, the chemical composition of WTE ash will also fluctuate. To understand the spatial and temporal variation in WTE ash composition, in Task I, we collected 128 ash samples (62 bottom ash and 66 fly ash samples) from 11 WTE facilities located in 11 U.S. states and characterized them via X-ray Fluorescence, powder X-ray Diffraction, and Raman Spectroscopy. The findings from this extensive characterization work indicated that the key elements in WTE fly ashes are Ca, Cl (greater than 10 wt. %), Si, S, K, Zn ( between 1 and 10 wt. %), Mg, Al, P, Ti, Fe, Cu, Br, and Pb (between 0.1 and 1 wt. %). Similarly, the key elements in WTE bottom ash fraction finer than 45μm are Ca (greater than 10 wt. %), Mg, Al, Si, S, Cl, K, Ti, Fe, Zn (between 1 and 10 wt. %), P, V, Cr, Mn, Cu, Br, and Pb (between 0.1 and 1 wt. %). Here, we note that the dominant fraction of WTE bottom ash is the coarse fraction. The coarse WTE bottom ash fraction (rich in silicon) was not characterized in this study because of excessive grinding requirements and their unsuitability as a supplementary cementitious material due to their coarse nature. The elements in WTE bottom ashes are present as calcite, anhydrite, vaterite, hydroxyapatite, quartz, bassanite, gehlenite, akermanite, hydrocalumite, and portlandite. Similarly, the mineralogical species present in WTE fly ashes are calcium chloride hydroxide, halite, calcite, anhydrite, sylvite, hydrocalumite, vaterite, hannebachite, quartz, and bassanite. Temporal variation in ash composition may also result in significant fluctuations in chemical compositions. Therefore, a WTE facility may need to monitor the ash composition (elemental and mineralogical composition) in real time. In Task I, we evaluated the possibility of using a portable X-ray fluorescence (XRF) spectrometer to monitor the elemental composition in real-time. Specifically, we collected XRF data on identical specimens via a portable XRF spectrometer (low-end) and a lab-based benchtop XRF spectrometer (high-end). The collected data was used to train an A.I. algorithm (portable XRF data as an input and benchtop XRF data as an output) to predict accurate elemental composition using portable XRF data. Finally, we developed a 2-minute photobleaching protocol to monitor the mineralogical characteristics of WTE ashes via Raman spectroscopy. Overall, the activities in Task I improved our understanding of ash composition and developed techniques to monitor elemental and mineralogical composition in near real-time. Based on the findings of Task I, we find that WTE ashes exhibit wide variability in mineralogy. For ICP-based elemental analysis, all the mineralogical species in WTE ashes must be brought into solution. This is traditionally accomplished with acid digestion using a combination of multiple acids. However, acid digestion with multiple acids is time-consuming and often fails to ensure complete digestion of the ash matrix. To address this limitation, in Task II, we developed an alkali-fusion-based digestion protocol using a combination of lithium tetraborate, lithium metaborate, and their combinations as possible alkali fluxes for digesting WTE ashes entirely and rapidly. The validity of the developed method was evaluated on two standard ash specimens, i.e., SRM 1633c coal fly ash and BCR-176R incineration fly ash specimen. The findings suggest that the developed protocol can ensure complete digestion of elements such as Al, Ba, Ca, Cr, Cu, Mg, Mn, P, Sr, V, Zn, Be, K, and rare earth elements. The recent changes in the energy market towards renewables and increased metal recycling have resulted in reduced supplies of supplementary cementitious materials (coal fly ash and slag). Therefore, in Task III, we evaluated the possibility of employing WTE ashes as SCMs. As the chemical composition of WTE ashes varies temporally (on an hourly basis), there was also a need to develop tests that can evaluate the suitability of material to act as supplementary cementitious material rapidly, i.e., in a few minutes. Therefore, in Task II, we also developed a rapid test to assess the suitability of a material to act as an SCM in 5 minutes. This represents a significant advance over the state-of-the-art R 3 test, which takes ~144 hours. This test was initially validated on amorphous aluminosilicates, such as calcined clays, and could be extended to evaluate other industrial by-products, such as WTE ashes. In Task III, we evaluated the possibility of employing WTE ashes for two applications, i.e., as an SCM and a lime substitute for clay stabilization. The findings from Task I indicated that WTE ashes are enriched in chlorine and, therefore, cannot be used directly as an SCM due to corrosion-related risks and altered hydration kinetics. Accordingly, we developed an ash treatment protocol to reduce the solubility of chlorine-containing species in WTE ashes. The developed treatment protocol also immobilized lead in certain mineral forms. As a result of the treatment, WTE ashes can be used as SCMs without any corrosion or heavy metal leaching concerns. The second application examined in this study was clay stabilization. WTE ashes are calcium-rich and can be an adequate lime replacement for clay stabilization. Our findings reveal that the sum of the concentrations of Ca(OH) 2 and CaClOH controls the clay stabilization capability of WTE ashes. In summary, in this work, we evaluated the elemental and mineralogical characteristics of U.S. WTE ashes from diverse origins and developed tests to evaluate the chemical characteristics of these ashes in real time through a portable XRF and a benchtop Raman spectrometer. Based on the chemical characteristics of these ashes, we developed an ash treatment process to enable the use of WTE ashes as an SCM and also evaluated the possibility of employing these ashes for clay stabilization. Overall, the findings from this work enables the diversion of WTE ashes from landfills for multiple end-uses, i.e., as an SCM or a lime substitute for clay stabilization.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Factors Impacting Range Hood Use in California Houses and Low-Income Apartments

Venting range hoods can control indoor air pollutants emitted during residential cooktop and oven cooking. To quantify their potential benefits, it is important to know how frequently and under what conditions range hoods are operated during cooking. We analyzed data from 54 single family houses and 17 low-income apartments in California in which cooking activities, range hood use, and fine particulate matter (PM 2.5 ) were monitored for one week per home. Range hoods were used for 36% of cooking events in houses and 28% in apartments. The frequency of hood use increased with cooking frequency across homes. In both houses and apartments, the likelihood of hood use during a cooking event increased with the duration of cooktop burner use, but not with the duration of oven use. Actual hood use rates were higher in the homes of participants who self-reported more frequent use in a pre-study survey, but actual use was far lower than self-reported frequency. Residents in single family houses used range hoods more often when cooking caused a discernible increase in PM 2.5 . In apartments, residents used their range hood more often only when high concentrations of PM 2.5 were generated during cooking.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1974

Land use and mapping

This summary is divided into two basic sections-one dealing with land use classification and delineation, and the other dealing with mapping. The term land use classification is used in respect to the actual use of land rather than land capability, land suitability, or the potential use of land. The classification of actual use of the land, as defined by man's activities that are related to the land, may be only inferred, rather than directly interpreted, in the case of the identification and classification of some surface features or vegetation cover types. Also, in the case of some surface features or vegetational cover types, the specific activity involving man's use of the land may not be designated in a four-level classification system until level 3 or level 4 is reached. Most investigations employed or implied a hierarchial land use classification scheme with more than two levels, but mainly addressed themselves to classifying and delineating surface features (land use) that would fall in the first two levels of a three- or four-level hierarchial scheme. Although not all investigators used a hierarchial classification scheme or concurred with the idea (computer-implemented classifications with digital data are not conducive to a hierarchial classification approach), the classification system proposed by the U.S. Department of the Interior is used as reference.

Joyce, A. T.↗
NASA NTRS1990

Kalman filter based range estimation for autonomous navigation using imaging sensors

Rotorcraft operating in high-threat environments fly close to the surface of the earth to utilize surrounding terrain, vegetation, or man-made objects to minimize the risk of being detected by the enemy. Two basic requirements for obstacle avoidance are detection and range estimation of the object from the current rotorcraft position. There are many approaches to the estimation of range using a sequence of images. The approach used in this analysis differes from previous methods in two significant ways: an attempt is not made to estimate the rotorcraft's motion from the images; and the interest lies in recursive algorithms. The rotorcraft parameters are assumed to be computed using an onboard inertial navigation system. Given a sequence of images, using image-object differential equations, a Kalman filter (Sridhar and Phatak, 1988) can be used to estimate both the relative coordinates and the earth coordinates of the objects on the ground. The Kalman filter can also be used in a predictive mode to track features in the images, leading to a significant reduction of search effort in the feature extraction step of the algorithm. The purpose is to summarize early results obtained in extending the Kalman filter for use with actual image sequences. The experience gained from the application of this algorithm to real images is very valuable and is a necessary step before proceeding to the estimation of range during low-altitude curvilinear flight. A simple recursive method is presented to estimate range to objects using a sequence of images. The method produces good range estimates using real images in a laboratory set up and needs to be evaluated further using several different image sequences to test its robustness. The feature generation part of the algorithm requires further refinement on the strategies to limit the number of features (Sridhar and Phatak, 1989). The extension of the work reported here to curvilinear flight may require the use of the extended Kalman filter.

Sridhar, Banavar↗
NASA NTRS1991

Knowledge repositories for multiple uses

In the life cycle of a complex physical device or part, for example, the docking bay door of the Space Station, there are many uses for knowledge about the device or part. The same piece of knowledge might serve several uses. Given the quantity and complexity of the knowledge that must be stored, it is critical to maintain the knowledge in one repository, in one form. At the same time, because of quantity and complexity of knowledge that must be used in life cycle applications such as cost estimation, re-design, and diagnosis, it is critical to automate such knowledge uses. For each specific use, a knowledge base must be available and must be in a from that promotes the efficient performance of that knowledge base. However, without a single source knowledge repository, the cost of maintaining consistent knowledge between multiple knowledge bases increases dramatically; as facts and descriptions change, they must be updated in each individual knowledge base. A use-neutral representation of a hydraulic system for the F-111 aircraft was developed. The ability to derive portions of four different knowledge bases is demonstrated from this use-neutral representation: one knowledge base is for re-design of the device using a model-based reasoning problem solver; two knowledge bases, at different levels of abstraction, are for diagnosis using a model-based reasoning solver; and one knowledge base is for diagnosis using an associational reasoning problem solver. It was shown how updates issued against the single source use-neutral knowledge repository can be propagated to the underlying knowledge bases.

Williamson, Keith↗