SEARCH · Engineering Papers

Results for “Temperature sensitivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

All sources NASA NTRS DOE OSTI

NASA NTRS1979

Contribution to the theory of photopic vision: Retinal phenomena

Principles of thermodynamics are applied to the study of the ultramicroscopic anatomy of the inner eye. Concepts introduced and discussed include: the retina as a three-dimensional sensor, light signals as coherent beams in relation to the dimensions of retinal pigments, pigment effects topographed by the conjugated antennas effect, visualizing lights, the autotropic function of hemoglobin and some cytochromes, and reversible structural arrangements during photopic adaptation. A paleoecological diagram is presented which traces the evolution of scotopic vision (primitive system) to photopic vision (secondary system) through the emergence of structures sensitive to the intensity, temperature, and wavelengths of the visible range.

Calvet, H.↗

NASA NTRS1984

Fabrication development for ODS-superalloy, air-cooled turbine blades

MA-600 is a gamma prime and oxide dispersion strengthened superalloy made by mechanical alloying. At the initiation of this program, MA-6000 was available as an experimental alloy only and did not go into production until late in the program. The objective of this program was to develop a thermal-mechanical-processing approach which would yield the necessary elongated grain structure and desirable mechanical properties after conventional press forging. Forging evaluations were performed to select optimum thermal-mechanical-processing conditions. These forging evaluations indicated that MA-6000 was extremely sensitive to die chilling. In order to conventionally hot forge the alloy, an adherent cladding, either the original extrusion can or a thick plating, was required to prevent cracking of the workpiece. Die design must reflect the requirement of cladding. MA-6000 was found to be sensitive to the forging temperature. The correct temperature required to obtain the proper grain structure after recrystallization was found to be between 1010-1065 C (1850-1950 F). The deformation level did not affect subsequent crystallization; however, sharp transition areas in tooling designs should be avoided in forming a blade shape because of the potential for grain structure discontinuities. Starting material to be used for forging should be processed so that it is capable of being zone annealed to a coarse elongated grain structure as bar stock. This conclusion means that standard processed bar materials can be used.

Moracz, D. J.↗

NASA NTRS1985

Experimental assessment of advanced Stirling component concepts

The results of an experimental assessment of some advanced Stirling engine component concepts are presented. High performance piston rings, reciprocating oil scrapers and heat pipes with getters and with mechanical couplings were tested. The tests yielded the following results: (1) Bonded, split, pumping piston rings, in preliminary testing, proved a promising concept, exhibiting low leakage and friction losses. Solid piston rings proved impractical in view of their sensitivity to the operating temperature; (2) A babbit oil scraper in a compliant housing performed well in atmospheric endurance testing. In pressurized tests the scraper did not perform well as a containment seal. The latter tests suggest modifications which may adapt Ti successfully to that application; and (3) Heat pipe endurance tests indicated the adequacy of simple, inexpensive fabrication and filling procedures. Getters were provided to increase the tolerance of the heat pipes to the presence of air and commercially available couplings were demonstrated to be suitable for heat pipe application. In addition to the above tests, the program also included a design effort for a split shaft applicable to a swashplate driven engine with a pressurized crank-case. The design is aimed, and does accomplish, an increase in component life to more than 10,000 hours.

Ziph, B.↗

NASA NTRS1986

Observations of Far-Infrared Molecular Emission Lines from the Orion Molecular Cloud

The Orion Nebula was the subject of intensive study for over one hundred years. Recently, several far infrared transitions among the low-lying levels of OH were observed toward IRc2. The OH is thought to be abundant, and plays an important role in the chemical evolution of shock and post-shock regions. The OH emission serves as a sensitive probe of the temperature and density for the shock-processed gas. A rigorous treatment of the radiative transfer of these measured transitions was performed using the escape probability formalism. From this analysis, the temperature of the OH-emitting region was determined to be on the order of 40K. This suggests that the gas is part of the post-shock gas that has cooled sufficiently, most likely by way of radiative cooling by CO. Such cooling from shock temperatures of several degrees can be accomplished in 100 years. A molecular hydrogen density of 3 million/cubic cm and an OH column density of 1.0 x 10 to the 17th /sq cm is found. The beam filling factor is determined to be 36%.

Viscuso, P. J.↗

NASA NTRS1986

A progress report on bolometers operating at 0.1 K using adiabatic demagnetization refrigeration

Bolometers are still the detectors of choice for low background infrared observations at wavelengths longer than 200 microns. In the low background limit, bolometers become more sensitive as their operating temperature decreases, due to fundamental thermodynamic laws. The adiabatic demagnetization technique was evaluated by building a bolometer detection system operating at a wavelength of 1 millimeter for use at a ground based telescope. The system was fit checked at the telescope and is expected to take its first data in November, 1985.

Roellig, T.↗

NASA NTRS1986

Measurement of atmospheric HO by a chemical method

The parameters for a chemical technique can be outlined from the following set of desirable goals: (1) sufficient conversion of tracer species A to product B that B can be measured quantitatively in the presence of A and a great excess of air; (2) specificity of reaction such that A is converted to B only by reaction with HO; and (3) sufficient sensitivity for detection that the ambient concentration of HO is not seriously perturbed by the presence of A and B. This proposed study involves finding a chemical reaction specific enough for OH, and a measurement of the product formed. What one wants is a rate constant of about 10 to the -10th power cu cm/s, so that 0.1 percent of the OH will be converted in 100 s. Laboratory studies are needed to find a reaction which will fill this bill, yielding a product in quantity sufficient for precise measurement. This is an extremely fast constant and the search may be difficult. Again there is a question of perturbing the local environment, while still providing a sensitive measurement. Also the temperature and pressure dependence of the reaction rate is a complicated function for many of these species (that is, one must use a RRKM or Troe-based picture), and must be taken into account.

Iyer, R. Subramonia↗

NASA NTRS1986

The energy distributions of B supergiants in the Large Magellanic Cloud

It is shown that line-blanketed, LTE, plane-parallel model atmosphere calculations provide excellent fits to the ultraviolet-through-visual energy distributions of B supergiants in the Large Magellanic Cloud. The models were computed using Kurucz's (1979) ATLAS atmosphere program, but with lower gravities than were contained in Kurucz's published model grid. The ultraviolet continua of low gravity stars are found to be sensitive to changes in temperature and gravity. Measurements of Teff and log g for ten LMC B supergiants from model atmosphere fits to the energy distributions yield estimates of their radii, luminosities, and masses. Model atmosphere fits suggest that the late B supergiants have significantly lower masses than the earlier B types of the same luminosity, contrary to stellar evolution theory which predicts that B supergiants are in a post-core hydrogen burning phase and should evolve very quickly and at essentially constant mass.

Fitzpatrick, Edward L.↗

NASA NTRS1986

Oceanic cloud feedbacks on earth radiation budget parameters

Oceanic cloud variability and sensitivity to sea surface temperature (SST) were examined using radiometer data gathered with instrumentation on the Nimbus-7 satellite. The study area was a region of the Pacific Ocean north of Hawaii. SST and albedo data for the period 1978-1983 were compared and similar trends were found for minimal values of the albedo and SST.

Chertock, B.↗

NASA NTRS1987

Nonradial g-mode oscillations in X-ray bursting neutron stars

The oscillation spectrum of nonradial g-modes in X-ray bursting neutron stars has been studied. The pulsation periods are found to be sensitive to the envelope temperature and range from about 15 ms to about 50 ms for the l = 1 g(1) mode during the X-ray burst. From a quasi-adiabatic stability analysis it is likely that a spectrum of l-pole g-modes is unstable due to the epsilon-mechanism associated with rapid alpha captures. As the thermal structure of the envelope of the neutron star changes on time scales less than 0.2 s during the rise of the X-ray burst, the oscillations are expected to be quasi-coherent during this phase. The calculated period derivatives are large during the burst and are about 1 ms/s. The pulsations are short-lived and are most likely to be seen in the immediate vicinity of the burst peak. Finally, the possible relevance of nonradial g-mode pulsations to the recently discovered quasi-periodic oscillations observed in a number of X-ray sources is discussed.

Mcdermott, P. N.↗

NASA NTRS1988

I(CO)/N(H2) conversions and molecular gas abundances in spiral and irregular galaxies

Observations of emission in the J = 1-0 rotational transition of interstellar CO are used to obtain column densities and masses of hydrogen. By taking into account the effects of variations in molecular cloud parameters on conversion factors between integrated CO intensity and molecular hydrogen column density, it is shown that conversion factors are very sensitive to the kinetic temperature of the emitting gas. Results indicate that the gas temperatures in systems with high star formation rates can be quite high, and it is suggested that use of a standard conversion factor will lead to systematic overestimation of the amount of molecular gas.

Maloney, Philip↗

NASA NTRS1989

Raman intensity as a probe of concentration near a crystal growing in solution

The feasibility of using Raman spectral scattering signals for measurements of concentration profiles near a crystal interface during growth or dissolution is discussed. With KH2PO4 (KDP) as a test material, optical multichannel analyzer (OMA) detection of a solute Raman vibrational band provided direct quantification of solute concentration with band intensity. The intersection of incident laser and Raman collection optics provided 3-D selective point measurements of the solution concentration field. Unlike many other techniques, the Raman band intensity is not sensitive to the typical temperature variations. Precision calibration of Raman intensity versus KDP concentration with less than 1 pct standard deviation error levels was demonstrated. A fiber optic, which sampled incident laser intensity and coupled it to the OMA, provided a fully synchronized monitor of fluctuations in laser power to correlate with observed Raman signals. With 1 W of laser power at the sample, good data statistics required eight repeated data collections at approximately 2.5 min collection. The accumulated time represents the concentration measurement time at one spatial location. Photomicroscopy documented a 30 micrometer diameter by 200 micrometer of laser Raman scattering region in the solution near the crystal surface. The laser beam was able to approach up to 25 micrometer from the crystal surface. However, a crystal surface reflected intensity contribution was weakly detectable. Nucleated microcrystals were seen in the crystal-growing solution. These microcrystals convect right up to the crystal surface and indicate no quiet diffusion region under normal gravity conditions. Translation of the solution cell with respect to the optics caused systematic intensity errors.

Wilkinson, R. Allen↗

NASA NTRS1991

Fiber-optic sensors for aerospace electrical measurements: An update

Fiber-optic sensors are being developed for electrical current, voltage, and power measurements in aerospace applications. These sensors are presently designed to cover ac frequencies from 60 Hz to 20 kHz. The current sensor, based on the Faraday effect in optical fiber, is in advanced development after some initial testing. Concentration is on packaging methods and ways to maintain consistent sensitivity with changes in temperature. The voltage sensor, utilizing the Pockels effect in a crystal, has excelled in temperature tests. This paper reports on the development of these sensors, the results of evaluation, improvements now in progress, and the future direction of the work.

Patterson, Richard L.↗

NASA NTRS1990

A modified integrated NDVI for improving estimates of terrestrial net primary production

Logic is presented for a time-integrated NDVI that is modified by an AVHRR derived surface evaporation resistance factor sigma, and truncated by temperatures that cause plant dormancy, to improve environmental sensitivity. With this approach, NDVI observed during subfreezing temperatures is not integrated. Water stress-related impairment in plant activity is incorporated by reducing the effective NDVI at each integration with sigma, which is derived from the slope of the surface temperature to NDVI ratio for climatically similar zones of the scene. A comparison of surface resistance before and after an extended drought period for a 1200 sq km region of coniferous forest in Montana is presented.

Running, Steven W.↗

NASA NTRS1991

Thermoelectric properties of pressure-sintered Si(0.8)Ge(0.2) thermoelectric alloys

The thermoelectric properties of 28 sintered Si(0.8)Ge(0.2) alloys, heavily doped with either B or P and prepared from powders with median particle sizes ranging from about 1 to over 100 microns, have been determined from 300 to 1300 K. The thermal conductivity decreases with decreasing particle size; however, the figure of merit is not significantly increased due to a compensating reduction in the electrical conductivity. The thermoelectric figure of merit is in good agreement with results of Dismukes et al. (1964) on similarly doped alloys prepared by zone-leveling techniques. The electrical and thermal conductivity are found to be sensitive to preparation procedure while the Seebeck coefficient and figure of merit are much less sensitive. The high-temperature electrical properties are consistent with charge carrier scattering by acoustic or optical phonons.

Vining, Cronin B.↗

NASA NTRS1991

Fiber-optic sensors for aerospace electrical measurements - An update

The authors report the progress made on the development of aerospace current and voltage sensors which use fiber-optic and optical sensing heads. These sensors are presently designed to cover ac frequencies from 60 Hz to 20 kHz. The current sensor, based on the Faraday effect in optical fiber, is in advanced development after some initial testing. The emphasis is on packaging methods and ways to maintain consistent sensitivity with changes in temperature. The voltage sensor, utilizing the Pockels effect in a crystal, has excelled in temperature tests. The authors report on the development of these sensors. The authors also relate the technology used in the sensors, the results of evaluation, improvements being made, and the future direction of the work.

Patterson, Richard L.↗

NASA NTRS1991

Sea ice - atmosphere interaction: Application of multispectral satellite data in polar surface energy flux estimates

In the past six months, work has continued on energy flux sensitivity studies, ice surface temperature retrievals, corrections to Advanced Very High Resolution Radiometer (AVHRR) thermal infrared data, modelling of cloud fraction retrievals, and radiation climatologies. We tentatively conclude that the SSM/I may not provide accurate enough estimates of ice concentration and type to improve our shorter term energy flux estimates. SSM/I derived parameters may still be applicable in longer term climatological flux characterizations. We hold promise for a system coupling observation to a ice deformation model. Such a model may provide information on ice distribution which can be used in energy flux calculations. Considerable variation was found in modelled energy flux estimates when bulk transfer coefficients are modulated by lead fetch. It is still unclear what the optimum formulation is and this will be the subject of further work. Data sets for ice surface temperature retrievals were assembled and preliminary data analysis was started. Finally, construction of a conceptual framework for further modelling of the Arctic radiation flux climatology was started.

Steffen, Konrad↗

NASA NTRS1993

A study of the influence of satellite data on GLA analyses over the Atlantic Ocean during a period of blocking anticyclone development

This paper presents a statistical diagnosis of the differences between two Goddard Laboratory for Atmospheres analysis representations of temperature and wind speed, one containing satellite data influences (SAT analyses) and one without (NOSAT analyses), for a case of oceanic blocking anticyclone development. Results, obtained using area means and standard deviations of the two fields and correlation coefficients and root-mean-square differences between the two fields, indicate that the inclusion of satellite data can have significant impact on ocean-domain analyses. This is especially evident if one examines higher-order fields that represent gradients in the basic variable fields or contain covariances between two different variables (e.g., advections). More specifically, the inclusion of satellite data resulted in a cold (warm) temperature bias at low (high) levels and weaker temperature gradients, stronger winds, weaker vertical wind shears, and a warm-air advection bias at most levels. The SAT analyses also exhibited larger standard deviations than the NOSAT for wind speed, relative vorticity, vorticity advection, temperature advection, and 500-mb height tendencies, suggesting that for this case the spatial variability of the circulation features were enhanced by the inclusion of satellite data. Even so, since height tendencies forced by vorticity and temperature advection were less sensitive to the addition of satellite data than were the advection quantities themselves, the dynamics of the blocking system was apparently less influenced by the presence of satellite data than was the structure of the system.

Lamberty, Gregory L.↗

NASA NTRS1993

More on the cooling history of angrite LEW 86010

Antarctic angrite LEW 86010 has many chemical and mineralogical characteristics which suggest it is closely related to Angra dos Reis (ADOR). However, these meteorites have had very different thermal histories. Olivines and pyroxenes in ADOR are nearly homogeneous, suggesting very slow cooling or extensive subsolidus equilibration. In contrast, LEW 86010 pyroxenes are extensively zoned in both major and trace elements, while olivines are nearly homogeneous, suggesting that cooling of this sample was slow enough to homogenize olivines, but too fast to homogenize pyroxenes. In an earlier study, we used Ca diffusion gradients associated with exsolution lamellae of kirsh-steinite in LEW 86010 olivines to estimate the cooling rate of this sample. We obtained cooling rates of a few x.01 deg C/yr, corresponding to a burial depth of approximately 10(exp 2) m under solid rock (thermal diffusivity = 0.004 sq cm/s), or approximately m under regolith material (10(exp -5) sq cm/s). Unfortunately, this calculation was very sensitive to the assumed temperature of initial exsolution, which we approximated from the estimated initial olivine bulk Ca content, and also to the extrapolated values for the Ca diffusion coefficient (D sub Ca). This abstract reports new cooling rate estimates obtained using a refined approach that includes the initial temperature of exsolution as one of the fitted parameters. The purpose of our new calculations is (1) to reduce uncertainties in cooling rate due to uncertainties in bulk olivine Ca content and initial exsolution temperature, (2) to investigate the effects of using different values for D sub Ca, and (3) to determine how well constrained the cooling rate is for any particular Ca diffusion coefficient.

Mckay, G.↗