Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TOKAMAK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

MHD limits in non-inductive tokamak plasmas: simulations and comparison to experiments on Tore Supra

Non-inductive tokamak discharges with a flat or hollow current profile are prone to the triggering of large tearing modes when the minimum of the safety factor is just below a low order rational. This issue is of particular importance for discussing the optimal safety factor for MHD modes avoidance in Steady-State reactor plasmas. Different non-linear regimes of such magnetic configurations in Tore Supra are studied using the full MHD code XTOR. Numerical simulations show that the non-linear stage of the Double-Tearing Mode (DTM) is governed by the full reconnection model, but a single tearing mode in a low magnetic shear configuration can have a similar impact on the confinement. The different regimes observed experimentally are recovered in the simulations: a small amplitude (2,1) DTM for close resonant surfaces as seen in Tore Supra, a sawtooth-like behaviour of the (2,1) Double-Tearing Mode as first seen in TFTR, or a large amplitude (2,1) tearing mode that severely degrades the energy confinement, as reported in Tore Supra, JET or DIII-D. Situations where q{sub min}{approx_equal}1.5 with a stable n = 1 mode, as seen in Tore Supra longest discharges, seem to put specific constraints on the MHD model that is used. Indeed, curvature stabilisation without transport terms as could explain linear stability, but such effect vanishes in presence of heat transport. Electron diamagnetic rotation effect is investigated as a possible mechanism for n = 1 mode stabilization.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Scintillator based detector for fast-ion losses induced by magnetohydrodynamic instabilities in the ASDEX upgrade tokamak

A scintillator based detector for fast-ion losses has been designed and installed on the ASDEX upgrade (AUG) tokamak [A. Herrmann and O. Gruber, Fusion Sci. Technol. 44, 569 (2003)]. The detector resolves in time the energy and pitch angle of fast-ion losses induced by magnetohydrodynamics (MHD) fluctuations. The use of a novel scintillator material with a very short decay time and high quantum efficiency allows to identify the MHD fluctuations responsible for the ion losses through Fourier analysis. A Faraday cup (secondary scintillator plate) has been embedded behind the scintillator plate for an absolute calibration of the detector. The detector is mounted on a manipulator to vary its radial position with respect to the plasma. A thermocouple on the inner side of the graphite protection enables the safety search for the most adequate radial position. To align the scintillator light pattern with the light detectors a system composed by a lens and a vacuum-compatible halogen lamp has been allocated within the detector head. In this paper, the design of the scintillator probe, as well as the new technique used to analyze the data through spectrograms will be described. A last section is devoted to discuss the diagnosis prospects of this method for ITER [M. Shimada et al., Nucl. Fusion 47, S1 (2007)].

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The effect of off-axis neutral beam injection on sawtooth stability in ASDEX Upgrade and Mega-Ampere Spherical Tokamak

Sawtooth behavior has been investigated in plasmas heated with off-axis neutral beam injection in ASDEX Upgrade [A. Herrmann and O. Gruber, Fusion Sci. Technol. 44, 569 (2003)] and the Mega-Ampere Spherical Tokamak (MAST) [A. Sykes et al., Nucl. Fusion 41, 1423 (2001)]. Provided that the fast ions are well confined, the sawtooth period is found to decrease as the neutral beam is injected further off-axis. Drift kinetic modeling of such discharges qualitatively shows that the passing fast ions born outside the q=1 rational surface can destabilize the n=1 internal kink mode, thought to be related to the sawtooth instability. This effect can be enhanced by optimizing the deposition of the off-axis beam energetic particle population with respect to the mode location.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma Physics found in JT-60 Tokamak over the Last 20 years

This paper summarizes major plasma physics obtained during the period of JT-60 operation for 23 years with special emphasis on research towards steady-state operation of tokamak. Topics included are observation of large bootstrap current fraction, negative shear scenario, demonstration of efficient beam and EC current drive, discovery of current hole, stabilization of the RWM, discovery of ITB (internal transport barrier).

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of LHCD efficiency on the FT-2 tokamak

The paper pays the main attention to the LHCD efficiency in experiments on the FT-2 tokamak. LH wave spectra P(N{sub z}) excited by the grill computed by GRILL3D code are presented. Physical processes responsible for termination of the CD with density rise are discussed for lower and higher plasma currents that are for relatively cold and relatively hot plasmas. A role of parametric processes and additional impurity influx for CD switching-off in the plasma are considered for those conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Magnetic signature of current carrying edge localized modes filaments on the Joint European Torus tokamak

Fast magnetic pickup coils are used in forward modeling to match parameters in a simple edge localized mode (ELM) filament model. This novel method allows us to determine key parameters for the evolution of the ELM filaments, as effective mode number, radial and toroidal velocities, and average current from standard magnetic diagnostics. The method is employed on a number of Joint European Torus (JET) [F. Romanelli, R. Kamendje, and JET-EFDA Contributors, Nucl. Fusion 49, 104006 (2009)] pulses. The parameter values obtained are compared to ELM filament characterization from JET and other tokamaks, obtained by a range of different diagnostics. It is found that the forward modeling produces key parameters such as the number of filaments and their toroidal velocity in agreement with other observations and in addition allows an estimate of the filament current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhanced production of runaway electrons during electron cyclotron resonance heating and in the presence of supersonic molecular beam injection in the HL-2A tokamak

In the present paper, it is reported that a large production of runaway electrons has been observed during the flattop phase of electron cyclotron resonance heating (ECRH) discharges and in the presence of supersonic molecular beam injection (SMBI) in the HuanLiuqi-2A (commonly referred to as HL-2A) [Q. W. Yang, Nucl. Fusion 47, S635 (2007)] tokamak. For the set of discharges carried out in the present experiment, the ranges of ECRH power and plasma electron density are 0.8-1.0 MW and (3.0-4.0)x10{sup 19} m{sup -3}, respectively. A large number of superthermal electrons are produced through the avalanche effect [A. Lazaros, Phys. Plasmas 8, 1263 (2001)] during ECRH. The loop voltage increase due to SMBI gives rise to a decline in the critical runaway energy, which leads to that many superthermal electrons could be converted into runaway region. Therefore, this phenomenon may come from the synergetic effects of ECRH and SMBI. That is, the superthermal electrons created by ECRH are accelerated into runaway regime via the Dreicer process which is triggered by SMBI. The experimental results are in well agreement with the calculational ones based on the superthermal electron avalanche effect and the Dreicer runaway theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Drift-Alfven waves induced optical emission fluctuations in Aditya tokamak

In Aditya tokamak [S. B. Bhatt et al. Indian J. Pure Appl. Phys. 27, 710 (1989)], an increase in the H{sub a}lpha and C{sup 2+} intensity fluctuations from the edge region is observed with an increase in the magnetohydrodynamic (MHD) activity. Very small fluctuation amplitudes of H{sub a}lpha and C{sup 2+} intensity are observed in discharges where there is no MHD activity compared to the discharges with MHD activity. These fluctuations in the H{sub a}lpha and C{sup 2+}, measured by optical filter--photomultiplier tube combination--are modulated by Mirnov oscillations having a dominant peak with a common frequency approx7-10 kHz. Further investigation reveals the presence of strong coherent fluctuations in density and floating potential at same frequency as well. These observations indicate the existence of a nonelectrostatic instability, which may be based on the coupled mode of the drift mode and the Alfven mode. The coherent density fluctuations give rise to the experimentally observed coherent H{sub a}lpha and C{sup 2+} intensity fluctuations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Runaway-loss induced negative and positive loop voltage spikes in the Aditya Tokamak

Negative spikes followed by positive ones in the loop voltage signal during the discharge are observed in the Aditya Tokamak [S. B. Bhatt et al., Indian J. Pure Appl. Phys. 27, 710 (1989)]. These spikes are always accompanied by hard x-ray bursts caused by sudden loss of runaway electrons. The observed growth of m=3 mode seemed responsible for the losses of localized beams of runaway electrons (E{sub {gamma}{approx}1}-5 MeV) from the plasma region around q=3 magnetic surface. The movement of these runaway electrons during their extraction from inside the plasma induces both positive and negative electric fields at those locations. In this paper, a one-dimensional toroidal electric field diffusion model is used to estimate the induced electric field at the plasma boundary, which matches quite well with the observed spikes in loop voltage in both magnitude as well as its temporal evolution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Composition And Electrical Properties Of Dust From Tokamak Compass

In spite of the fact that fusion is a subject of the study for many years, there are still a lot of open questions. One of the interesting topics in fusion research is a presence of dust grains in reactors. In the paper, dust grains born in tokamak Compass are studied and compared with samples of a spherical geometry and well known composition. A unique experimental setup was used for investigations of charging properties of such grains and the SEM and EDX spectroscopy was applied for a study of grain composition. We focus on the secondary emission because this process plays a prominent role when a portion of energetic electrons is present in surroundings of a particular grain. It was shown that depending on the grain size and material, energetic electrons charge the grains to positive potentials comparable with the energy of impinging electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct Electron Heating Observed by Fast Waves in ICRF Range on a Low-Density Low Temperature Tokamak ADITYA

Fast wave electron heating experiments are carried out on Aditya tokamak [R = 0.75 m, a = 0.25m,Bt = 0.75T,ne{approx}1-3E13/cc,Te{approx}250eV] with the help of indigenously developed 200 kW, 20-40 MHz RF heating system. Significant direct electron heating is observed by fast waves in hydrogen plasma with prompt rise in electron temperature with application of RF power and it increases linearly with RF power. A corresponding increase in plasma beta and hence increase in stored diamagnetic energy is also observed in presence of RF. We observe an improvement of energy confinement time from 2-4msec during ohmic heating phase to 3-6msec in RF heating phase. This improvement is within the ohmic confinement regime for the present experiments. The impurity radiation and electron density do not escalate significantly with RF power. The direct electron heating by fast wave in Aditya is also predicted by ion cyclotron resonance heating code TORIC.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

EBW H and CD Potential for Spherical Tokamaks

Spherical tokamaks (STs), which feature relatively high neutron flux and good economy, operate generally in high-ss regimes, in which the usual EC O- and X- modes are cut-off. In this case, electron Bernstein waves (EBWs) seem to be the only option that can provide features similar to the EC waves--controllable localized heating and current drive (H and CD) that can be utilized for core plasma heating as well as for accurate plasma stabilization. We first derive an analytical expression for Gaussian beam OXB conversion efficiency. Then, an extensive numerical study of EBW H and CD performance in four typical ST plasmas (NSTX L- and H-mode, MAST Upgrade, NHTX) is performed. Coupled ray-tracing (AMR) and Fokker-Planck (LUKE) codes are employed to simulate EBWs of varying frequencies and launch conditions. Our results indicate that an efficient and universal EBW H and CD system is indeed viable. In particular, power can be deposited and current reasonably efficiently driven across the whole plasma radius. Such a system could be controlled by a suitably chosen launching antenna vertical position and would also be sufficiently robust.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Introducing minimum Fisher regularisation tomography to AXUV and soft x-ray diagnostic systems of the COMPASS tokamak

The contribution focuses on plasma tomography via the minimum Fisher regularisation (MFR) algorithm applied on data from the recently commissioned tomographic diagnostics on the COMPASS tokamak. The MFR expertise is based on previous applications at Joint European Torus (JET), as exemplified in a new case study of the plasma position analyses based on JET soft x-ray (SXR) tomographic reconstruction. Subsequent application of the MFR algorithm on COMPASS data from cameras with absolute extreme ultraviolet (AXUV) photodiodes disclosed a peaked radiating region near the limiter. Moreover, its time evolution indicates transient plasma edge cooling following a radial plasma shift. In the SXR data, MFR demonstrated that a high resolution plasma positioning independent of the magnetic diagnostics would be possible provided that a proper calibration of the cameras on an x-ray source is undertaken.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Diagnostic of fusion neutrons on JET tokamak using diamond detector

In 2011-2012, an experimental campaign with a significant yield of fusion neutrons was carried out on the JET tokamak. During this campaign the facility was equipped with two diamond detectors based on natural and artificial CVD diamond. These detectors were designed and manufactured in State Research Center of Russian Federation TRINITI. The detectors measure the flux of fast neutrons with energies above 0.2 MeV. They have been installed in the torus hall and the distance from the center of plasma was about 3 m. For some of the JET pulses in this experiment, the neutron flux density corresponded to the operational conditions in collimator channels of ITER Vertical Neutron Camera. The main objective of diamond monitors was the measurement of total fast neutron flux at the detector location and the estimation of the JET total neutron yield. The detectors operate as threshold counters. Additionally a spectrometric measurement channel has been configured that allowed us to distinguish various energy components of the neutron spectrum. In this paper we describe the neutron signal measuring and calibration procedure of the diamond detector. Fluxes of DD and DT neutrons at the detector location were measured. It is shown that the signals of total neutron yield measured by the diamond detector correlate with signals measured by the main JET neutron diagnostic based on fission chambers with high accuracy. This experiment can be considered as a successful test of diamond detectors in ITER-like conditions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Non-inductively driven tokamak plasmas at near-unity β t in the Pegasus toroidal experiment

A major goal of the spherical tokamak (ST) research program is accessing a state of low internal inductance ℓ i , high elongation κ , and high toroidal and normalized beta ( β t and β N ) without solenoidal current drive. Local helicity injection (LHI) in the Pegasus ST [Garstka et al., Nucl. Fusion 46, S603 (2006)] provides non-solenoidally driven plasmas that exhibit these characteristics. LHI utilizes compact, edge-localized current sources for plasma startup and sustainment. It results in hollow current density profiles with low ℓ i . The low aspect ratio ( R 0 / a ~ 1.2 ) of Pegasus allows access to high κ and high normalized plasma currents I N = I p / a B T > 14 ). Magnetic reconnection during LHI provides auxiliary ion heating. Together, these features provide access to very high β t plasmas. Equilibrium analyses indicate that β t up to ~100% is achieved. Finally, these high β t discharges disrupt at the ideal no-wall β limit at β N ~ 7.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

3D simulations of vertical displacement events in tokamaks: A benchmark of M3D-C 1 , NIMROD, and JOREK

In recent years, the nonlinear 3D magnetohydrodynamic codes JOREK, M3D-C1, and NIMROD developed the capability of modeling realistic 3D vertical displacement events (VDEs) including resistive walls. In this paper, a comprehensive 3D VDE benchmark is presented between these state-of-the-art codes. The simulated case is based on an experimental NSTX plasma but with a simplified rectangular wall. There are differences between the physics models and numerical methods, and the VDE evolution leads to sensitivities on the initial conditions that cannot be avoided as can be done in edge localized modes (ELM) and sawtooth simulations (due to the non-cyclical nature of VDEs). Nonetheless, the comparison serves to quantify the level of agreement in the relevant quantities used to characterize disruptions, such as the 3D wall forces and energy decay. The results bring confidence regarding the use of the mentioned codes for disruption studies, and they distinguish aspects that are specific to the models used (e.g., reduced vs full MHD models). Here, the simulations show important 3D fea- tures for a NSTX plasma, such as the self-consistent evolution of the halo current and the origin of the wall forces. In contrast to other reduced MHD models based on an ordering in the aspect ratio, the ansatz-based JOREK reduced MHD model allows capturing many aspects of the 3D dynamics even in the spherical tokamak limit considered here.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Computational study of runaway electrons in MST tokamak discharges with applied resonant magnetic perturbation

A numerical study of magnetohydrodynamics (MHD) and tracer-particle evolution investigates the effects of resonant magnetic perturbations (RMPs) on the confinement of runaway electrons (REs) in tokamak discharges conducted in the Madison Symmetric Torus. In computational results of applying RMPs having a broad toroidal spectrum but a single poloidal harmonic, m = 1 RMP does not suppress REs, whereas m = 3 RMP achieves significant deconfinement but not the complete suppression obtained in the experiment. MHD simulations with the NIMROD code produce sawtooth oscillations, and the associated magnetic reconnection can affect the trajectory of REs starting in the core region. Simulations with m = 3 RMP produce chaotic magnetic topology over the outer region, but the m = 1 RMP produces negligible changes in field topology, relative to applying no RMP. Using snapshots of the MHD simulation fields, full-orbit relativistic electron test particle computations with KORC show ≈50% loss from the m = 3 RMP compared to the 10%–15% loss from the m = 1 RMP. Here, test particle computations of the m = 3 RMP in the time-evolving MHD simulation fields show correlation between MHD activity and late-time particle losses, but total electron confinement is similar to computations using magnetic-field snapshots.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Initiation and sustainment of tokamak plasmas with local helicity injection as the majority current drive

Local helicity injection (LHI) is a non-solenoidal current drive capable of achieving high- I p tokamak startup with non-invasive current injectors in the plasma scrape-off layer. The choice of injector location within the edge region is flexible but has a profound influence on the nature of the current drive in LHI discharges. New experiments on the Pegasus ST with injection in the high-field-side, lower divertor region produce plasmas dominated by helicity injection current drive, static plasma geometry, and negligible inductive drive. Peak plasma current up to 200 kA, and a sustained plasma current of 100 kA for up to 18 ms, is demonstrated. Maximum achievable plasma current is found to scale approximately linearly with the effective loop voltage from LHI. A newly-observed MHD regime for LHI-driven plasmas in which large-amplitude n = 1 fluctuations at 20–50 kHz are abruptly reduced on the outboard side results in improved current drive. In conclusion, a simultaneous increase in high frequency fluctuations (>400 kHz) inside the plasma edge suggests short wavelength turbulence as an important current drive mechanism during LHI.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗