Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface condition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Combined Cyclohexene Dehydrogenation and Oxygenation over VO x /CeO 2 with O 2 and Vaporized H 2 O 2 as Oxidants

Selective oxidation of hydrocarbons over metal oxide catalysts frequently invokes Mars-van Krevelen (MvK) mechanisms involving lattice oxygens. At typical reaction temperatures, oxidative dehydrogenation reactions predominate and compete with total oxidation; production of more useful oxygenates is challenging. However, because regeneration of lattice oxygens has been previously hypothesized to involve transient formation of surface hydroperoxides or peroxides, MvK cycles should be capable of forming products derived from both lattice oxygen and surface (hydro)peroxide species, under certain conditions. In this report, we study the low temperature reaction of cyclohexene with O 2 over CeO 2 -supported VO x catalysts. Below 150°C and for higher VO x loading, cyclohexene converts to benzene and trans-1,2-cyclohexanediol with no appreciable CO 2 formation. Control experiments show similar behavior in other supported vanadia catalysts. Conversely, using vaporized H 2 O 2 as oxidant exclusively gives 1,2-cyclohexanedione, suggesting that MvK reoxidation cycles do not directly involve H 2 O 2 . Furthermore, these findings contribute to the current understanding of selective oxidation mechanisms, and demonstrate routes to the formation of industrially useful oxygenates with O 2 or vaporized H 2 O 2 over metal oxide catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Mapping the Interfacial Chemistry and Structure of Partially Fluorinated Bottlebrush Polymers and Their Linear Analogues

Polymer interfaces are key to a range of applications including membranes for chemical separations, hydrophobic coatings, and passivating layers for antifouling. While important, challenges remain in probing the interfacial monolayer where the molecular ordering and orientation can change depending on the chemical makeup or processing conditions. In this work, we leverage surface specific vibrational sum frequency generation (SFG) and the associated dependence on molecular symmetry to elucidate the ordering and orientations of key functional groups for poly(2,2,2-trifluoroethyl methacrylate) bottlebrush polymers and their linear polymer analogues. These measurements were framed by atomistic molecular dynamic simulations to provide a complementary physical picture of the gas–polymer interface. Simulations and SFG measurements show that methacrylate backbones are buried beneath a layer of trifluoroethyl containing side groups that result in structurally similar interfaces regardless of the polymer molecular weight or architecture. The average orientational angles of the trifluoroethyl containing side groups differ depending on polymer linear and bottlebrush architectures, suggesting that the surface groups can reorient via available rotational degrees of freedom. Results show that the surfaces of the bottlebrush and linear polymer samples do not strongly depend on molecular weight or architecture. As such, one cannot rely on increasing the molecular weight or altering the architecture to tune surface properties. This insight into the polymer interfacial structure is expected to advance the design of new material interfaces with tailored chemical/functional properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Detailed Characterization of an Annealed Reduced Graphene Oxide Catalyst for Selective Peroxide Formation Activity

Recently, electrochemical hydrogen peroxide (H 2 O 2 ) generation from oxygen molecules has been extensively studied. Thus far, the best peroxide activity under alkaline conditions has been reported at the surface of a mild reduced graphene oxide annealed at 600 °C (mrGO-600). However, the detailed material information, such as chemical functionality and structural morphology, is unknown, which results in ambiguous debates on its catalytic active sites. Therefore, to solve this problem, we intensively characterize the structure of mrGO-600 to clarify the origin of its catalytic activity. Various characterizations, including X-ray photoelectron spectroscopy, Raman spectroscopy, infrared spectroscopy, near-edge X-ray absorption fine spectroscopy, and high-resolution transmittance electron microscopy coupled with in situ infrared spectroelecrochemistry, reveal that the annealing process generates not only various hole edge defects that are related to the ring ether group but also numerous point defects that result in a small-sized disconnected graphitic carbon region. These defects are believed to form a unique atomic level configuration in mrGO-600, which enables it to facilitate high peroxide-generated activity from oxygen molecules in an alkaline electrolyte.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Isopotential Electron Titration: Hydrogen Adsorbate-Metal Charge Transfer

The extent of charge transfer between an adsorbate and thermocatalytic surface plays a key role in determining catalytic activity, but direct and quantitative measures have remained elusive. Here, we report the method of isopotential electron titration (IET), an approach that directly measures charge transfer between adsorbates and catalytic surfaces. Charge transfer between Pt and adsorbed hydrogen adatoms was investigated using a catalytic condenser, where the Pt surface was separated from a p-type silicon layer by a hafnia dielectric film. By forcing the Pt and Si layers into isopotential conditions, charge transfer between the adsorbate and Pt surface was titrated through an external circuit. Hydrogen atoms donated electrons to Pt upon adsorption, which was quantitatively reversed upon desorption. Across a temperature range of 125–200 °C (surface hydrogen fractional coverages of 80–100%), the charge transferred to Pt by an adsorbed hydrogen atom was measured to be 0.19 ± 0.01% |e|/H. Bader charge analysis of the extent of charge transfer was in agreement with experimental measurements, with a calculated net donation of 0.4% |e|/H. The ability to experimentally quantify surface charge transfer provides an electronic-based approach to characterize catalytic surfaces, the adsorbed moieties residing on them, and the chemical reactions they accelerate.

Adsorption↗
DOE OSTI2022

Dynamical Study of Adsorbate-Induced Restructuring Kinetics in Bimetallic Catalysts Using the PdAu(111) Model System

The dynamic restructuring of bimetallic catalysts plays a crucial role in their catalytic activity and selectivity. In particular, catalyst pretreatment with species such as carbon monoxide and oxygen has been shown to be an effective strategy for tuning the surface composition and morphology. Mechanistic and kinetic understanding of such restructuring are fundamental to the chemistry and engineering of surface active sites but have remained challenging due to the large structural, chemical, and temporal degrees of freedom. Here, we combine time-resolved temperature-programmed infrared reflection absorption spectroscopy, ab initio thermodynamics, and machine-learning molecular dynamics to uncover previously unidentified timescale and kinetic parameters of in situ restructuring in Pd/Au(111), a highly relevant model system for dilute Pd-in-Au nanoparticle catalysts. The key innovation lies in utilizing CO not only as a chemically sensitive probe of surface Pd, but also as an agent that induces restructuring of the surface. Upon annealing in vacuum, as-deposited Pd islands became encapsulated by Au and partially dissolved into the subsurface, leaving behind isolated Pd monomers on the surface. Subsequent exposure to 0.1 mbar CO enabled Pd monomers to repopulate the surface up to 373 K, above which complete Pd dissolution occurred by 473 K, with apparent activation energies of 0.14 and 0.48 eV, respectively. Furthermore, these restructuring processes occurred over the span of ~1000 s at a given temperature. Such a minute-timescale dynamics not only elucidates the fluxional nature of alloy catalysts but also presents an opportunity to fine-tune the surface at moderate temperature and pressure conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Warm Phase of AMV Damps ENSO Through Weakened Thermocline Feedback

Abstract Interactions between ocean basins affect El Niño–Southern Oscillation (ENSO), altering its impacts on society. Here, we explore the effect of Atlantic Multidecadal Variability (AMV) on ENSO behavior using idealized experiments performed with the NCAR‐CESM1 model. Comparing warm (AMV+) to cold (AMV−) AMV conditions, we find that ENSO sea surface temperature (SST) anomalies are reduced by ∼10% and ENSO precipitation anomalies are shifted to the west during El Niño and east during La Niña. Using the Bjerknes stability index, we attribute the reduction in ENSO variability to a weakened thermocline feedback in boreal autumn. In AMV+, the Walker circulation and trade winds strengthen over the tropical Pacific, increasing the background zonal SST gradient. The background changes shift ENSO anomalies westwards, with wind stress anomalies more confined to the west. We suggest the changes in ENSO‐wind stress decrease the strength of the thermocline feedback in the east, eventually reducing ENSO growth rate.

Trascasa‐Castro, Paloma↗
DOE OSTI2024

How Do Climate Model Resolution and Atmospheric Moisture Affect the Simulation of Unprecedented Extreme Events Like the 2021 Western North American Heat Wave?

Abstract Although the 2021 Western North America (WNA) heat wave was predicted by weather forecast models, questions remain about whether such strong events can be simulated by global climate models (GCMs) at different model resolutions. Here, we analyze sets of GCM simulations including historical and future periods to check for the occurrence of similar events. High‐ and low‐resolution simulations both encounter challenges in reproducing events as extreme as the observed one, particularly under the present climate. Relatively stronger amplitudes are observed during the future periods. Furthermore, high‐ and low‐resolution short initialized GCM simulations are both able to reasonably predict such strong events and their associated high‐pressure ridge over the WNA with a 1 week forecast lead time. Moisture sensitivity experiments further indicate a drier atmospheric moisture condition results in substantially higher near‐surface temperatures in the simulated heat events.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Step engineering for nucleation and domain orientation control in WSe 2 epitaxy on c -plane sapphire

In this study, epitaxial growth of two-dimensional transition metal dichalcogenides on sapphire has emerged as a promising route to wafer-scale single-crystal films. Steps on the sapphire act as sites for transition metal dichalcogenide nucleation and can impart a preferred domain orientation, resulting in a substantial reduction in mirror twins. Here we demonstrate control of both the nucleation site and unidirectional growth direction of WSe 2 on c-plane sapphire by metal–organic chemical vapour deposition. The unidirectional orientation is found to be intimately tied to growth conditions via changes in the sapphire surface chemistry that control the step edge location of WSe 2 nucleation, imparting either a 0° or 60° orientation relative to the underlying sapphire lattice. The results provide insight into the role of surface chemistry on transition metal dichalcogenide nucleation and domain alignment and demonstrate the ability to engineer domain orientation over wafer-scale substrates.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Complete miscibility of immiscible elements at the nanometre scale

Understanding the mixing behaviour of elements in a multielement material is important to control its structure and property. When the size of a multielement material is decreased to the nanoscale, the miscibility of elements in the nanomaterial often changes from its bulk counterpart. However, there is a lack of comprehensive and quantitative experimental insight into this process. Here, in this study, we explored how the miscibility of Au and Rh evolves in nanoparticles of sizes varying from 4 to 1 nm and composition changing from 15% Au to 85% Au. We found that the two immiscible elements exhibit a phase-separation-to-alloy transition in nanoparticles with decreased size and become completely miscible in sub-2 nm particles across the entire compositional range. Quantitative electron microscopy analysis and theoretical calculations were used to show that the observed immiscibility-to-miscibility transition is dictated by particle size, composition and possible surface adsorbates present under the synthesis conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Grain boundary facilitated dissolution of nanocrystalline NpO 2 (s) from legacy waste processing

Dissolution of actinide dioxides, including neptunium dioxide (NpO 2 (s)), is paramount for the prediction of the environmental fate of nuclear materials. Quantifying dissolution rates, as well as understanding qualitative dissolution mechanisms, informs performance assessment for geologic disposal of spent nuclear fuel and management of legacy radioactive waste. The aim of this research was to measure the dissolution rate of nanocrystalline NpO 2 (s), produced through legacy nuclear waste processing, under oxidizing conditions, as well as to characterize surface alteration to the material. The solid phase was characterized using electron microscopy techniques (SEM/STEM) and X-ray photoelectron spectroscopy (XPS), indicating preferential dissolution of Np-hydroxide contained in the grain boundaries of NpO 2 (s) and fragmentation of grains from the matrix. The oxidative dissolution was monitored over 40 weeks, yielding a two-step kinetic dissolution model involving hydration of NpO 2 (s) and subsequent oxidation and dissolution of the hydroxide phase. Here, the proposed dissolution models for nanocrystalline NpO 2 (s) suggest that microstructural features such as grain boundaries are key factors affecting dissolution, including release of colloidal particles, and ultimately, environmental fate and transport of nuclear materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

Olefin metathesis over supported MoO x catalysts: influence of the oxide support

Here, a series of supported MoO x catalysts on different oxide supports (Al2O3, TiO2, ZrO2, SiO2) were synthesized and investigated for propylene metathesis, characterized with in situ spectroscopies (DRIFTS, Raman, UV-vis) and chemically probed with propylene-TPSR-MS, propylene-TPSR-IR, and ethylene/2-butene titration. Under dehydrated conditions at monolayer coverage or maximum surface dispersion, the surface MoO x sites are present as a mixture of isolated di-oxo (O=) 2 Mo(–O–Al) 2 and oligomeric mono-oxo O=Mo(–O–Al) 4/5 sites on Al 2 O 3 , primarily oligomeric mono-oxo O=Mo(–O–Ti) 4/5 on TiO 2 , isolated di-oxo (O=) 2 Mo(–O–Zr) 2 and oligomeric mono-oxo O=Mo(–O–Zr) 4/5 on ZrO 2 , and isolated di-oxo (O=) 2 Mo(–O–Si) 2 on SiO 2 . The bridged (S 2 -OH) and tri-coordinated (S 3 -OH) anchoring surface hydroxyls of the oxide supports with strong support cation electronegativity control the activation and number of active surface MoO x sites at low temperatures (<100 °C). The isolated anchoring surface hydroxyls (S-OH) of the oxide supports with strong support cation electronegativity control the activation and number of active surface MoO x sites at high temperatures (>350 °C). Olefin metathesis by the more redox active supported MoO x /TiO 2 and MoO x /ZrO 2 catalysts is retarded by the formation of stable surface acetone and acetate species that block olefin adsorption. The oxide supports are potent ligands that tune the activation and surface chemistry of the surface MoOx sites for olefin metathesis. This is the first time that the influence of oxide supports on the activation and surface chemistry of supported MoO x sites has been systematically examined.

02 PETROLEUM↗
DOE OSTI2023

Twelve-crystal prototype of Li 2 MoO 4 scintillating bolometers for CUPID and CROSS experiments

An array of twelve 0.28 kg lithium molybdate (LMO) low-temperature bolometers equipped with 16 bolometric Ge light detectors, aiming at optimization of detector structure for CROSS and CUPID double-beta decay experiments, was constructed and tested in a low-background pulse-tube-based cryostat at the Canfranc underground laboratory in Spain. Performance of the scintillating bolometers was studied depending on the size of phonon NTD-Ge sensors glued to both LMO and Ge absorbers, shape of the Ge light detectors (circular vs. square, from two suppliers), in different light collection conditions (with and without reflector, with aluminum coated LMO crystal surface). The scintillating bolometer array was operated over 8 months in the low-background conditions that allowed to probe a very low, μBq/kg, level of the LMO crystals radioactive contamination by 228 Th and 226 Ra.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Searching for the origin of the rare-earth peak with precision mass measurements across Ce–Eu isotopic chains

A nuclear mass survey of rare-earth isotopes has been conducted with the Canadian Penning Trap mass spectrometer using the most neutron-rich nuclei thus far extracted from the CARIBU facility. Here, we present a collection of 12 nuclear masses determined with a precision of ≤ 10 keV/c 2 for Z = 58-63 nuclei near N = 100. Independently, a detailed study exploring the role of nuclear masses in the formation of the r-process rare-earth abundance peak has been performed. Employing a Markov chain Monte Carlo (MCMC) technique, mass predictions of lanthanide isotopes have been made which uniquely reproduce the observed solar abundances near A = 164 under three distinct astrophysical outflow conditions. We demonstrate that the mass surface trends thus far mapped out by our measurements are most consistent with MCMC mass predictions given an r process that forms the rare-earth peak during an extended (n, γ) ⇌ (γ, n) equilibrium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Melt Pool characteristics on surface roughness and printability of 316L stainless steel in laser powder bed fusion

Purpose Surface quality and porosity significantly influence the structural and functional properties of the final product. This study aims to establish and explain the underlying relationships among processing parameters, top surface roughness and porosity level in additively manufactured 316L stainless steel. Design/methodology/approach A systematic variation of printing process parameters was conducted to print cubic samples based on laser power, speed and their combinations of energy density. Melt pool morphologies and dimensions, surface roughness quantified by arithmetic mean height (Sa) and porosity levels were characterized via optical confocal microscopy. Findings The study reveals that the laser power required to achieve optimal top surface quality increases with the volumetric energy density (VED) levels. A smooth top surface (Sa < 15 µm) or a rough surface with humps at high VEDs (VED > 133.3 J/mm 3 ) can serve as indicators for fully dense bulk samples, while rough top surfaces resulting from melt pool discontinuity correlate with high porosity levels. Under insufficient VED, melt pool discontinuity dominates the top surface. At high VEDs, surface quality improves with increased power as mitigation of melt pool discontinuity, followed by the deterioration with hump formation. Originality/value This study reveals and summarizes the formation mechanism of dominant features on top surface features and offers a potential method to predict the porosity by observing the top surface features with consideration of processing conditions.

Engineering↗
DOE OSTI2025

Outgassing measurements of bare and magnetite-coated low-carbon steel vacuum chambers

The outgassing properties of bare and magnetite-coated AISI 1020 low-carbon steel vacuum chambers were evaluated to establish material selection criteria for extreme high vacuum applications, namely, to explore the possibility of using these materials to build next-generation spin-polarized photoelectron guns. Water outgassing measurements using the throughput method revealed that the magnetite-coated chamber exhibited five times lower outgassing at room temperature prior to baking, but this advantage disappears after 80 °C baking. Hydrogen outgassing measurements demonstrated significant differences after intensive heat treatment: the bare low-carbon steel vacuum chamber achieved a specific outgassing rate of 9.6 × 10 −16 Torr L s −1 cm −2 after 400 °C/50 h bake plus additional heat treatment at lower temperatures, 25 times lower than the magnetite-coated low-carbon steel chamber. Residual gas analysis showed >99% hydrogen composition after heat treatment for both materials, with carbon species below detection limits for bare low-carbon steel versus 0.8% for magnetite-coated surfaces. These measurements indicate that properly conditioned bare low-carbon steel can achieve the <10 −12 Torr pressures required for next-generation spin-polarized photogun applications. In conclusion, the paper includes various analysis techniques intended to explain observed behaviors: isotherm analysis of pump-down plots, Arrhenius analysis of hydrogen outgassing rate data, and residual gas composition tracking.

Adsorption isotherm↗
DOE OSTI2022

Elucidating Cathode Degradation Mechanisms in LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811)/Graphite Cells Under Fast Charge Rates Using Operando Synchrotron Characterization

Li-ion batteries capable of extreme fast charging (XFC) are in demand to facilitate widespread electric vehicle (EV) adoption. While the impact of fast charge on the negative electrode has been studied, degradation of state-of-the-art NMC811 under XFC conditions has not been studied in detail. Herein, cathode degradation is probed in NMC811/graphite batteries by analysis of structural and chemical changes for recovered samples previously cycled under XFC conditions and during typical cycling. NMC surface reconstruction, as determined by soft X-ray absorption, was not detected for recovered electrodes. Furthermore, bulk redox activity from X-ray absorption near edge structure measurements showed more change in the oxidation state of Ni and Co under the 1C charge rate compared to the 4C rate consistent with the electrochemistry. Increased unit cell volume contraction under the 1C rate as determined by operando X-ray diffraction suggests that higher charge rates may provide a protective effect on the cathode by reducing structural distortion due to less delithiation.

25 ENERGY STORAGE↗
DOE OSTI2024

ATR-SEIRAS Method to Measure Interfacial pH during Electrocatalytic Nitrate Reduction on Cu

This study reports the accuracy and applications of an attenuated total reflectance–surface-enhanced infrared absorption spectroscopy (ATR–SEIRAS) technique to indirectly measure the interfacial pH of the electrolyte within 10 nm of the electrocatalyst surface. This technique can be used in situ to study aqueous electrochemical reactions with a calibration range from pH 1–13, time resolution down to 4 s, and an average 95% confidence interval of 14% that varies depending on the pH region (acidic, neutral, or basic). The method is applied here to electrochemical nitrate reduction at a copper cathode to demonstrate its capabilities, but is broadly applicable to any aqueous electrochemical reaction (such as hydrogen evolution, carbon dioxide reduction, or oxygen evolution) and the electrocatalyst may be any SEIRAS-active thin film (e.g., silver, gold, or copper). The time-resolved results show a dramatic increase in the interfacial pH from pH 2–7 in the first minute of operation during both constant current and pulsed current experiments where the bulk pH is unchanged. Attempts to control the pH polarization at the surface by altering the electrochemical operating conditions—lowering the current or increasing the pulse frequency—showed no significant change, demonstrating the challenge of controlling the interfacial pH.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗