Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Suppression”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43

Apparatus and method for jet noise suppression

A method and apparatus for jet noise suppression through control of the static pressure of the jet and control of the rate of entrainment of ambient fluid into the jet downstream of the exhaust nozzle is disclosed. The momentum flux over an extended region of the jet is regulated, affecting Reynolds stresses in the jet and the spreading angle of the jet. Static pressure is controlled through a long hollow, porous nozzle plug centerbody which may be selectively vented to ambient conditions, connected to a vacuum source, or supplied with fluids of various densities for injection into the stream. Sound in the jet may be channeled along the nozzle plug centerbody by injecting coolant such as a cryogenic fluid throughout the center-body into the jet.

Maestrello, L.↗

Flight test experience with pilot-induced-oscillation suppression filters

Digital flight control systems are popular for their flexibility, reliability, and power; however, their use sometimes results in deficient handling qualities, including pilot-induced oscillation (PIO), which can require extensive redesign of the control system. When redesign is not immediately possible, temporary solutions, such as the PIO suppression (PIOS) filter developed for the Space Shuttle, have been proposed. To determine the effectiveness of such PIOS filters on more conventional, high-performance aircraft, three experiments were performed using the NASA F-8 digital fly-by-wire and USAF/Calspan NT-33 variable-stability aircraft. Two types of PIOS filters were evaluated, using high-gain, precision tasks (close formation, probe-and-drogue refueling, and precision touch-and-go landing) with a time delay or a first-order lag added to make the aircraft prone to PIO. Various configurations of the PIOS filter were evaluated in the flight programs, and most of the PIOS filter configurations reduced the occurrence of PIOs and improved the handling qualities of the PIO-prone aircraft. These experiments also confirmed the influence of high-gain tasks and excessive control system time delay in evoking pilot-induced oscillations.

Shafer, M. F.↗

Space Shuttle ice suppression system validation, volume 1

Preliminary analytical considerations and the experimental investigation of the flow field for the desired configurations in the absence of wind effects are discussed. A wind tunnel test program to determine the effect of different wind conditions on ice suppression system (ISS) performance is also discussed.

Porteiro, J. L. F.↗

Eigenspace design techniques for active flutter suppression

The application of eigenspace design techniques to an active flutter suppression system for the DAST ARW-2 research drone is examined. Eigenspace design techniques allow the control system designer to determine feedback gains which place controllable eigenvalues in specified configurations and which shape eigenvectors to achieve desired dynamic response. Eigenspace techniques were applied to the control of lateral and longitudinal dynamic response of aircraft. However, little was published on the application of eigenspace techniques to aeroelastic control problems. This discussion will focus primarily on methodology for design of full-state and limited-state (output) feedback controllers. Most of the states in aeroelastic control problems are not directly measurable, and some type of dynamic compensator is necessary to convert sensor outputs to control inputs. Compensator design are accomplished by use of a Kalman filter modified if necessary by the Doyle-Stein procedure for full-state loop transfer function recovery, by some other type of observer, or by transfer function matching.

Garrard, W. L.↗

Experiences with the design and implementation of flutter suppression systems

Research efforts aim at flutter suppression are discussed. The application of active controls technology to reduce the aeroelastic response of aircraft structures is discussed. Feedback control, control law design processes and synthesis, wind tunnel studies, and delta-wing wind tunnel models are discussed.

Newsom, J. R.↗

Design of a candidate flutter suppression control law for DAST ARW-2

A control law is developed to suppress symmetric flutter for a mathematical model of an aeroelastic research vehicle. An implementable control law is attained by including modified LQC (Linear Quadratic Gaussian) design techniques, controller order reduction, and gain scheduling. An alternate (complementary) design approach is illustrated for one flight condition wherein nongradient-based constrained optimization techniques are applied to maximize controller robustness.

Adams, W. M., Jr.↗

On the suppression of zero energy deformation modes

Based on the Hellinger-Reissner principle and the deformation energy due to assumed stresses and displacements, the problem of the kinematic deformation modes in assumed stress hybrid/mixed finite elements has been examined. Basic schemes are developed for the choice of assumed stress terms that will suppress all kinematic deformation modes. Quadrilateral membrane and axisymmetric elements, and three-dimensional hexahedral elements, are used to illustrate the suggested procedure.

Pian, T. H. H.↗

Coronal mass ejection recurrence studies indicating global activity and local suppression

The distribution of time intervals between successive coronal mass ejection events observed from the SMM and Skylab coronagraphs has been analyzed. Histograms of such recurrence times show that mass ejections tend to cluster in periods of activity. Evidence is found for simultaneous activity on a global scale. A second result is that, statistically, limb regions within + or - 59 deg position angle of a mass ejection show a marked absence of subsequent observable ejections for approximately 10 h. Flares of importance greater than or equal to 1 show no such deficit; however, large disparitons brusques tend similarly to be suppressed, for 24 h. This result, together with the closer association of mass ejection with eruptive prominences rather than with flares and the realization that eruptive prominences are rarely if ever seen without an accompanying mass ejection, obviates suggestions that magnetohydrodynamic conditions in the outflow following the earlier mass ejection hide subsequent coronal events.

Wagner, W. J.↗

Eigenspace design of an active flutter suppression system

An active control system is designed for the suppression of wing flutter in a flight test vehicle. Eigenvalue placement is used to synthesize a full state controller which satisfies performance specifications on control surface activity and which exhibits excellent gain and phase margins. The use of limited state feedback is examined; however, it is found that a simple frequency response matching technique can be used to design a realizable compensator which reproduces the feedback properties of the full state controller. The performance of the control system using this compensator is evaluated at various flight conditions and found to be satisfactory. In addition eigenvector shaping is used to enhance the gust load alleviation capabilities of the flutter control system.

Liebst, B. S.↗

The suppression of convective wavebreaking by radiative transfer processes, part 1.3C

Schoeberl et al. (1983) suggested that convective wavebreaking of monochromatic gravity waves might be suppressed by radiative transfer processes if the vertical wavelength waves were sufficiently short. As the vertical wavelength or the gravity wave decreases, radiative transfer between adjacent vertical layers becomes increasingly important. This exchange can increase the radiative relaxation time scale so that the wave will no longer grow with altitude. Thus, very short vertical wavelength waves may dissipate radiatively rather than become convectively unstable. Apruzese and Strobel (1984) have revised the exchange coefficients used in Schoeberl et al. (1983). Also, Chao and Schoeberl (1984) pointed out that the computation made by LINDZEN (1981) of the convective diffusion rate may be a factor of two too low as the convective adjustment processes tends to minimize the thermal transport by the wave. The purpose here is to revise the values given in Schoeberl et al. (1983). These results also suggest that the very thin turbulent layers observed by mesosphere-stratosphere-troposphere (MST) radars (e.g., WOODMAN, 1980) cannot be produced by the convective instability of monochromatic gravity waves with large horizontal scales.

Schoeberl, M. R.↗

Principles of stray light suppression and conceptual application to the design of the Diffuse Infrared Background Experiment for NASA's Cosmic Background Explorer

The Diffuse Infrared Background Experiment (DIRBE) is a 10 band filter photometer that will operate at superfluid helium temperatures. Diffuse galactic and extragalactic infrared radiation in the 1-300 micrometer wavelength region will be measured by the instrument. Polarization measurements will be made for 3 bands in the 1-4 micrometer spectral region. The main sources of unwanted radiation are the sun, earth, thermal radiation from an external sun shield, the moon, the brighter planets and stars, and sky light itself from outside the instrument's nominal one degree square field of view. The system level engineering concepts and the principles of stray light suppression that resulted in the instrument design are presented.

Evans, D. C.↗

Extensions to PIFCGT: Multirate output feedback and optimal disturbance suppression

New control synthesis procedures for digital flight control systems were developed. The theoretical developments are the solution to the problem of optimal disturbance suppression in the presence of windshear. Control synthesis is accomplished using a linear quadratic cost function, the command generator tracker for trajectory following and the proportional-integral-filter control structure for practical implementation. Extensions are made to the optimal output feedback algorithm for computing feedback gains so that the multirate and optimal disturbance control designs are computed and compared for the advanced transport operating system (ATOPS). The performance of the designs is demonstrated by closed-loop poles, frequency domain multiinput sigma and eigenvalue plots and detailed nonlinear 6-DOF aircraft simulations in the terminal area in the presence of windshear.

Broussard, J. R.↗

Development of a flutter suppression control law by use of linear quadratic Gaussian and constrained optimization design techniques

A control law to suppress symmetric flutter for a mathematical model of an aeroelastic research vehicle is developed. An implementable control law is attained by including modified linear quadratic Gaussian design techniques, controller order reduction, and gain scheduling. A complementary design approach for a flight condition wherein nongradient-based constrained optimization techniques are applied to maximize controller robustness is illustrated.

Adams, W. M.↗

Research on antimisting fuel for suppression of postcrash aircraft fires

Recent experimental results in the field of post-crash aircraft fire suppression are reviewed, with emphasis given to antimisting kerosene fuel (AMK). Findings in three major areas of study are presented, including: rheological studies (skin friction, and heat transfer); fuel breakup processes and nozzle spray combustion; and the development of inline blenders for production of AMK at the refueling point. An interpretation of the results of the FAA/NASA Controlled Impact Demonstration of AMK fuel is also presented. It is concluded that AMK is a sound concept and offers several advantages over conventional fuels in any crash scenario involving post-crash fires.

Sarohia, V.↗

Development of a flutter suppression control law by use of Linear Quadratic Gaussian and constrained optimization design techniques

A control law is developed to suppress symmetric flutter for a mathematical model of an aeroelastic research vehicle. An implementable control law is attained by including modified LQG (Linear Quadratic Gaussian) design techniques, controller order reduction, and gain scheduling. An alternate (complementary) design approach is illustrated for one flight condition wherein nongradient-based constrained optimization techniques are applied to maximize controller robustness.

Adams, W. M., Jr.↗

Active Suppression of Rotor Vibrations

In active rotor control, vibrations of flexibly supported rotors suppressed by use of electronic feedback control system. System senses vibration level of rotor system and, in turn, provides damping such that vibration level maintained within acceptable limits. Enables rotor to operate through and above its critical speeds, increases bearing life, reduces size and weight of rotating shafts, and generally enables rotors to operate more smoothly.

Dirusso, Eliseo↗

Application of optimization techniques to the design of a flutter suppression control law for the DAST ARW-2

The design of a candidate flutter suppression (FS) control law for the symmetric degrees of freedom for the DAST ARW-2 aircraft is discussed. The results illustrate the application of several currently employed control law design techniques. Subsequent designs, obtained as the mathematical model of the ARW-2 is updated, are expected to employ similar methods and to provide a control law whose performance will be flight tested. This study represents one of the steps necessary to provide an assessment of the validity of applying current control law synthesis and analysis techniques in the design of actively controlled aircraft. Mathematical models employed in the control law design and evaluation phases are described. The control problem is specified by presenting the flutter boundary predicted for the uncontrolled aircraft and by defining objectives and constraints that the controller should satisfy. A full-order controller is obtained by using Linear Quadratic Gaussian (LQG) techniques. The process of obtaining an implementable reduced-order controller is described. One example is also shown in which constrained optimization techniques are utilized to explicitly include robustness criteria within the design algorithm.

Adams, W. M., Jr.↗

Evaluation of on-line pulse control for vibration suppression in flexible spacecraft

On-line pulse control for vibration suppression in a flexible spacecraft was evaluated. A continuous beam vs. a truss was modeled. A linear finite element model was used to determine the truss characteristics. Control issues outlined are ED pulse actuator development, pseudo pulse algorithm development, and large nonlinear simulation problems.

Bekey, G. A.↗