Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Study center”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Structure-Composition Subtleties in NaZn 13 -type Derivatives of Sr/Ca(Au x Al 1– x ) 12–13

In the ternary (Sr/Ca)-Au-Al phase space for 5–8 at % Sr/Ca and nearly equimolar mixture of Au and Al, five new NaZn 13 -derivatives Sr/Ca(Au x Al 1–x ) 12–13 were discovered and their atomic site preferences and electronic structures were studied: (1) at higher Au content, cubic SrAuxAl 13–x [7.24(2) ≥ x ≥ 6.68(2)] shows no obvious atomic site preferences; (2) at lower Au content, tetragonal SrAu x Al 13–x [6.59(1) ≥ x ≥ 6.35(3)] shows icosahedra exclusively centered by Al and preferential atomic arrangements to maximize the number of Au–Al (or Al-rich) shortest distances; (3) a monoclinic SrAu 6.10(3) Al 6.40 compound was uncovered from studies of a single crystal specimen with problematic refinement issues but more detailed powder X-ray diffraction analysis which suggest even more pronounced geometric distortion from the NaZn 13 -type structure as well as preferential arrangements for Au–Al nearest contacts; (4) tetragonal SrAu 5.75(2) Al 6.25 with all empty icosahedra; and (5) orthorhombic CaAu 6.09(2) Al 6.01(1) with icosahedra that are half empty and half partially occupied by Al. Electronic DOS and COHP curves were used to rationalize the structural depiction of Sr/Ca(Au x Al 1–x ) 12–13 as icosahedra packing of (Au x Al 1–x) 12–13 with voids filled by the electropositive Sr/Ca.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

How Did Westward Volcaniclastic Deposits Accumulate in the Deep Sea Following the January 2022 Eruption of Hunga Volcano?

Most volcanic eruptions on Earth take place below the ocean surface and remain largely unobserved. Reconstruction of past submerged eruptions has thus primarily been based on the study of seafloor deposits. Rarely before the 15 January 2022 eruption of Hunga volcano (Kingdom of Tonga) have we been able to categorically link deep-sea deposits to a specific volcanic source. This eruption was the largest in the modern satellite era, producing a 58-km-tall plume, a 20-m high tsunami, and a pressure wave that propagated around the world. The eruption induced the fastest submarine density currents ever measured, which destroyed submarine telecommunication cables and traveled at least 85 km to the west to the neighboring Lau Basin. Here we report findings from a series of remotely operated vehicle dives conducted 4 months after the eruption along the Eastern Lau Spreading Center-Valu Fa Ridge. Hunga-sourced volcaniclastic deposits 7–150 cm in thickness were found at nine sites, and collected. Study of the internal structure, grain size, componentry, glass chemistry, and microfossil assemblages of the cores show that these deposits are the distal portions of at least two ~100-km-runout submarine density currents. We identify distinct physical characteristics of entrained microfossils that demonstrate the dynamics and pathways of the density currents. Microfossil evidence suggests that even the distal parts of the currents were erosive, remobilizing microfossil-concentrated sediments across the Lau Basin. Remobilization by volcaniclastic submarine density currents may thus play a greater role in carbon transport into deep sea basins than previously thought.

58 GEOSCIENCES↗
DOE OSTI2022

Effect of single atom Platinum (Pt) doping and facet dependent on the electronic structure and light absorption of Lanthanum Titanium Oxide (La 2 Ti 2 O 7 ): A Density Functional Theory study

Charge generation and separation are two key processes for semiconductor photocatalysis. Here, we use Pt as a single atom catalyst to systematically examine the facet-dependent electronic band structure and light absorption of the layered perovskite-type wide-gap semiconductor, lanthanum titanium oxide (La 2 Ti 2 O 7 , LTO) by means of density functional theory simulations. In this study, it is found that single Pt atom doping of different LTO surfaces (here, (100), (101) and (001)) can not only create states in the bandgap that would promote the formation of recombination centers, but also shift the optical absorption edge to the visible region. Interestingly, the Pt doping forms a heterojunction, with the valence band maximum consisting of Pt states and the conduction band minimum consisting of LTO states, respectively. To study the facet dependent surface activity, acetic acid (CH 3 COOH) was used as a model molecule to investigate the adsorption and charge transfer on the (101), (100) and (001) Pt-LTO surface facets. The results show that the (101) facet could enable stronger adsorption of CH 3 COOH by promoting more electron transfer during the interfacial interaction. Our theoretical findings aim to promote the design and optimization of the single atom catalysts (SACs) for photocatalytic applications and other broad catalysis systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

STEM Characterization of Dislocation Loops in Irradiated FCC Alloys

In this study, we demonstrate the methodology systematically developed for dislocation loop (perfect and faulted loops) imaging and analysis in irradiated face-centered-cubic (FCC) alloys using scanning transmission electron microscopy (STEM). On-zone [001] STEM imaging was identified as the preferred choice for its accuracy and effectiveness based on the comparison with other dislocation loop imaging techniques including: (i) on-zone STEM imaging using other major low-index zone axes, (ii) kinematic two-beam conditions bright field imaging near the [001] zone axis in conventional TEM (CTEM) mode, and (iii) Rel-Rod CTEM dark-field (DF) imaging near the [011] zone axis. The effect of STEM collection angle on the contrast formation of dislocation loops was also investigated. The developed method was confirmed by imaging all populations of perfect and faulted loops of types a/2$\langle$110$\rangle${110} and a/3$\langle$111$\rangle${111} found in an ion irradiated Ni40Fe40Cr20 alloy. The proposed STEM-based technique can easily identify said loops with a size greater than 10 nm without any assumptions such as those commonly made using the conventional Rel-Rod CTEM-DF technique. The recommended methodology in this study is developed as a quick and convenient tool that can be generally applied to irradiated FCC-based materials due to their common crystallography.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Final Report on Development of Microwave Resonant Cavity Transducer for Fluid Flow Sensing: Development of Microwave Cavity Flow Meter for Advanced Reactor High Temperature Fluids

We are investigating a microwave resonant cavity transducer for flow sensing in the vessel of a high temperature fluid advanced reactor (AR), such as a molten salt cooled reactor (MSCR) or a sodium fast reactor (SFR). This transducer is a hollow metallic cylindrical cavity, with one of the flat walls of the cylinder flexible enough to undergo microscopic deflection due to dynamic fluid pressure. Membrane deflection leads to a shift in the microwave resonant frequency, which can be detected with a spectrum analyzer. We have developed a continuum electromechanics model of the microwave resonant cavity transducer performance. The deflection of the membrane is calculated using equations from the theory of plates and shells for deflection of radially constrained thin circular disk under uniform load. The microwave frequency shift is calculated using the equations from the microwave cavity perturbation theory. The transducer model was validated with proof-of-concept experimental data of water flow sensing with a Brass 360 right circular cylinder with 22.2mm diameter and 203µm thick wall. The cavity was excited through a subwavelength hole in TE 011 mode with resonant frequency f ≈ 17.8GHz. Subsequently, we have performed a preliminary proof-of-principle test of flow sensing in high temperature liquid sodium in environment. For this test, we have developed a cylindrical resonator with the same dimensions as for the Brass 360 cavity. The resonator for high temperature liquid sodium test was machined from stainless steel 316 and electroplated with silver on the interior surfaces. We have also developed and insertion probe consisting of a 50cm WR-42 brass waveguide enclosed in a protective SS316 tube. The cavity was excited through a subwavelength hole on the side of the wall of the cylinder in the TE 011 mode with resonant frequency f ≈ 17.8GHz. The liquid sodium setup consists of a cylindrical vessel with a center feed line, where a transducer inserted through the top cap of the vessel measures velocity of the impinging liquid jet. The sodium flow sensing study was performed in a liquid sodium vessel at 340°C temperature and ambient pressure. The flow rate was changed by varying sodium pump power, and a frequency shift of several hundred kHz was observed. The transducer was removed after 70 days of testing. No visual damage was observed, and the electromagnetic response remained the same. As a calibration experiment, we have assembled a water vessel with a center feed, and with dimensions similar to those of the liquid sodium setup. Water flow sensing was performed before and after liquid sodium test. The responses in both cases are similar and agree with COMSOL computer simulations. Because long-term (multi-year) experimental tests of transducer resilience to harsh environment are not practical, we have developed a probabilistic model of creep to estimate transducer resilience to the harsh environment. The probabilistic model considers diffusion creep under the condition of high temperature and low stress, where the stress and temperature are allowed to be random variables with Gaussian distributions. Using the probabilistic model, we estimate inelastic membrane deflections due to creep for several temperature ranges. We conclude that for temperatures less than 650°C, creep has negligible long-term effect on the transducer performance.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

New Noncentrosymmetric Tetrel Pnictides Composed of Square‐Planar Gold(I) with Peculiar Bonding

Abstract Three novel isostructural equiatomic gold tetrel pnictides, AuSiAs, AuGeP, and AuGeAs, were synthesized and characterized. These phases crystallize in the noncentrosymmetric (NCS) monoclinic space group Cc (no. 9), featuring square‐planar Au within cis ‐[AuTt 2 Pn 2 ] units (Tt=tetrel, Si, Ge; Pn=pnictogen, P, As). This is in drastic contrast to the structure of previously reported AuSiP, which exhibits typical linear coordination of Au with Si and P. Chemical bonding analysis through the electron localization function suggests covalent two‐center two‐electron Tt−Pn bonds, and three‐center Au−Tt−Au and Au−Pn−Au bonds with 1.6 e − per bond. X‐ray photoelectron spectroscopy studies support the covalent and nonionic nature of Au−Pn and Au−Tt bonds. The title materials were found to be n ‐type narrow‐gap semiconductors or semimetals, with nearly temperature‐independent electrical resistivities and low thermal conductivities. A combination of the semimetallic properties with tunable NCS structure provides opportunities for the development of materials based on gold tetrel pnictides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

DFT-based investigation of solvation of Nd(III)/Yb(III) cations in room-temperature ionic-liquid

We report a DFT study on the solvation of bare rare-earth (RE) cations [Nd(III) and Yb(III)] in the room-temperature ionic-liquid (RTIL) based on 1,3-dimethyl-imidazolium + , PF 6 - , [MMI][PF 6 ]. In the present article, we aim to investigate whether the chosen RTIL can preferentially solvate any of the RE cations under study. First, the RTIL binding to the RE cation is studied in the gas phase, and then explored with continuum solvation model employing RTIL parameters. First, we considered the formation of the first solvation shell, where the PF 6 - anions directly bond with the Ln(III) cation. We then further surrounded the first solvation shell with [MMI]+ cations to form the second solvation shell. The stability of PF 6 - coordinated complexes is studied by calculating the binding energy values. The number of PF 6 - anions for both Ln(III) cations starts with three ligands and goes until the maximum binding energy in the RTIL medium is reached. The coordination number and binding modes of PF 6 - depend on the size of the RE cation. Comparing the binding energy values between the RE cations for the first solvation shell complexes, it is noticed that Yb-complexes have relatively greater binding energy than Nd-complexes. We have further performed a Boltzmann population analysis to find out the most dominant conformer among each category of PF 6 - coordinated complexes. A study using Natural Population Analysis shows that after complexation with PF 6 - the charge on the Yb-centers lower to a greater extent than Nd-centers, implying stronger bonding between Yb and PF 6 - , which is in harmony with the binding energy analysis. Overall, the computational investigation provides an in-depth understanding of the complexation phenomena of RE cations in RTIL, which can be useful for the practical separation of RE cations using RTIL.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

The crystal structures of a chloride-pumping microbial rhodopsin and its proton-pumping mutant illuminate proton transfer determinants

Microbial rhodopsins are versatile and ubiquitous retinal-binding proteins that function as light-driven ion pumps, light-gated ion channels, and photosensors, with potential utility as optogenetic tools for altering membrane potential in target cells. Insights from crystal structures have been central for understanding proton, sodium, and chloride transport mechanisms of microbial rhodopsins. Two of three known groups of anion pumps, the archaeal halorhodopsins (HRs) and bacterial chloride-pumping rhodopsins, have been structurally characterized. Here we report the structure of a representative of a recently discovered third group consisting of cyanobacterial chloride and sulfate ion-pumping rhodopsins, the Mastigocladopsis repens rhodopsin (MastR). Chloride-pumping MastR contains in its ion transport pathway a unique Thr-Ser-Asp (TSD) motif, which is involved in the binding of a chloride ion. The structure reveals that the chloride-binding mode is more similar to HRs than chloride-pumping rhodopsins, but the overall structure most closely resembles bacteriorhodopsin (BR), an archaeal proton pump. The MastR structure shows a trimer arrangement reminiscent of BR-like proton pumps and shows features at the extracellular side more similar to BR than the other chloride pumps. We further solved the structure of the MastR-T74D mutant, which contains a single amino acid replacement in the TSD motif. We provide insights into why this point mutation can convert the MastR chloride pump into a proton pump but cannot in HRs. Our study points at the importance of precise coordination and exact location of the water molecule in the active center of proton pumps, which serves as a bridge for the key proton transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Dedicated short range communications used as fail-safe in autonomous navigation

Here in this paper, we have analyzed scenarios for leader-follower vehicle convoys that have the potential to be unsafe, hazardous, or even fatal in order to provide insight on dangerous driving conditions for autonomous vehicle platoons. These scenarios were created in a simulation software called Prescan, and are made to reflect the behavior of the vehicle dynamics and sensor characteristics of a real-world vehicle convoy that is currently being tested at the American Center for Mobility (ACM) and sponsored by the Department of Energy (DOE), National Renewable Energy Laboratory (NREL), the U.S. Army Combat Capabilities Development Command - Ground Vehicle Systems Center (U.S. Army CC-DEVCOM) and the Michigan Department of Transportation (MDOT). The follower vehicle in this study is tested under multiple scenarios, equipped with a Dedicated Short Range vehicle-to-vehicle communication system (DSRC), a radar-based adaptive cruise control system (ACC) and a precision global positioning system (GPS).

42 ENGINEERING↗
DOE OSTI2023

Charge separation in the photosystem II reaction center resolved by multispectral two-dimensional electronic spectroscopy

The photosystem II reaction center (PSII RC) performs the primary energy conversion steps of oxygenic photosynthesis. While the PSII RC has been studied extensively, the similar time scales of energy transfer and charge separation and the severely overlapping pigment transitions in the Qy region have led to multiple models of its charge separation mechanism and excitonic structure. Here, we combine two-dimensional electronic spectroscopy (2DES) with a continuum probe and two-dimensional electronic vibrational spectroscopy (2DEV) to study the cyt b559-D1D2 PSII RC at 77 K. This multispectral combination correlates the overlapping Qy excitons with distinct anion and pigment-specific Q x and mid-infrared transitions to resolve the charge separation mechanism and excitonic structure. Through extensive simultaneous analysis of the multispectral 2D data, we find that charge separation proceeds on multiple time scales from a delocalized excited state via a single pathway in which Pheo D1 is the primary electron acceptor, while Chl D1 and P D1 act in concert as the primary electron donor.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2022

A Muon Collider Facility for Physics Discovery

Muon colliders provide a unique route to deliver high energy collisions that enable discovery searches and precision measurements to extend our understanding of the fundamental laws of physics. The muon collider design aims to deliver physics reach at the highest energies with costs, power consumption and on a time scale that may prove favorable relative to other proposed facilities. In this context, a new international collaboration has formed to further extend the design concepts and performance studies of such a machine. This effort is focused on delivering the elements of a $\sim$10 TeV center of mass (CM) energy design to explore the physics energy frontier. The path to such a machine may pass through lower energy options. Currently a 3 TeV CM stage is considered. Other energy stages could also be explored, e.g. an s-channel Higgs Factory operating at 125 GeV CM. We describe the status of the R&D and design effort towards such a machine and lay out a plan to bring these concepts to maturity as a tool for the high energy physics community.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

CRADA Number NFE-19-07867 with Neptune Fluid Flow Systems (CRADA Final Report)

Neptune Fluid Flow Systems is a rising engineering firm with a technology focus in improving cryogenic sample preparation for cryogenic-transmission electron microscopy (cryo-TEM) studies. To advance the R&D of its innovative cryogenic preparation method, Neptune has teamed up with the Center for Nanophase Materials Science (CNMS) at Oak Ridge National Laboratory (ORNL) to achieve the following aims: (1) validate the technical feasibility of CryoSheet sample prep method, (2) design, fabricate and test the cryo-stage support, and (3) experiment and achieve success with the novel sample preparation method on different soft matters.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Investigating the Role of Defects in α-Pu Phase Transitions using Density Functional Theory

Before reaching its relatively low melting point of 913 K, plutonium undergoes six solid state phases: simple monoclinic alpha, body-centered monoclinic beta, face-centered orthorhombic gamma, face centered cubic delta, body-centered tetragonal delta-prime, and body-centered cubic epsilon phases. Due to their low symmetry, the monoclinic alpha and beta phases have not been studied extensively, however it has been previously hypothesized that the transition between alpha and beta is caused by defects in the lattices due to the incommensurate number of atoms. Additionally, the martensitic delta to alpha phase transformation in plutonium-gallium alloys induces an expanded alpha lattice known as alpha prime, most likely due to the insoluble gallium impurity atom. This work explores how defects such as plutonium interstitials and gallium interstitials and substitutionals may affect the alpha plutonium lattice, providing a better understanding of the mechanisms for the alpha-beta and martensitic phase transformations through density functional theory (DFT). Results indicate that plutonium interstitials within the alpha lattice induce beta features structurally and electronically, such as volume expansion and bonding changes, and gallium interstitials and substitutionals within the alpha lattice induce volume changes as observed experimentally in alpha prime.

36 MATERIALS SCIENCE↗
DOE OSTI2023

The Field Epidemiology Training Program’s Contribution to Essential Public Health Functions in Seven National Public Health Institutes

Objective: This study explores how Field Epidemiology Training Programs (FETP) whose National Public Health Institutes (NPHI) are supported by U.S. Centers for Disease Control and Prevention (CDC) have contributed to strengthening essential public health functions. Methods: We conducted 96 semi-structured interviews with public health experts including NPHI staff, non-NPHI government staff, and staff from non-governmental and international organizations in Cambodia, Colombia, Liberia, Mozambique, Nigeria, Rwanda, and Zambia. We managed data using MAXQDA and employed direct content analysis to derive themes. Results: Three overarching themes emerged in relation to FETPs’ role within the NPHIs’ public health functions. These themes included contribution to improving country surveillance systems, role in providing leadership in outbreak responses, and strengthening countries’ and the NPHIs’ surveillance workforce capacity. Participants also shared challenges around FETPs’ implementation and suggestions for improvement. Conclusion: The results demonstrate the value of FETPs in strengthening public health systems through building workforce capacity and improving surveillance systems. By identifying the successes of FETPs in contributing to essential public health functions, our findings might inform current and future FETP implementation and its integration into NPHIs.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2020

Pressure-Induced Dimerization of C 60 at Room Temperature as Revealed by an In Situ Spectroscopy Study Using an Infrared Laser

Using in situ high-pressure Raman spectroscopy and X-ray diffraction, the polymerization and structure evaluation of C 60 were studied up to 16 GPa at room temperature. The use of an 830 nm laser successfully eliminated the photo-polymerization of C 60 , which has interfered with the pressure effect in previous studies when a laser with a shorter wavelength was used as excitation. It was found that face-centered cubic (fcc) structured C 60 transformed into simple cubic (sc) C 60 due to the hint of free rotation for the C 60 at 0.3 GPa. The pressure-induced dimerization of C 60 was found to occur at about 3.2 GPa at room temperature. Our results suggest the benefit and importance of the choice of the infrared laser as the excitation laser.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Searching for Dwarf H$α$ Emission-line Galaxies within Voids. I. Survey Methods and First Observations

The population density of dwarf galaxies in low-density voids is likely determined by the dark matter halo mass function and how galaxy formation proceeds in smaller halos. This depends on the nature of dark matter itself, making the dwarf galaxy population a tracer of its properties. While dwarfs have been found in smaller, closer voids, they have proven difficult to find in larger, more distant voids through magnitude-limited spectroscopic surveys. This is because these surveys detect an overwhelmingly large number of objects behind the voids that must be verified spectroscopically, making void surveys prohibitively inefficient and expensive in terms of large-telescope time. Narrowband imaging for emission lines such as Hα reduces the number of background objects, although the overall number remains large. If imaging is done through a filter set with overlapping transmission wings, then object redshift can be estimated from photometry alone. The precision possible is an order of magnitude greater than single-band photometry, with the caveat that the captured line must be identified through other means. Broadband photometry can be used to reject enough objects with emission of an unwanted type to make obtaining spectra of the remaining objects feasible. In this study, we present an Hα survey for dwarf galaxies with M r ' fainter than -14 mag through the center 4.3 square degrees of the void FN8. Using Sloan $g^{\prime} ,r^{\prime} ,i^{\prime}$ photometry, we exclude enough [O II ] and [O III ] emitters that follow-up spectra of only a few dozen objects are required to statistically estimate the void population density.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Microtopographic and Depth Controls on Active Layer Chemistry in Arctic Polygonal Ground: Supporting Data

Polygonal ground is a signature characteristic of the Arctic, and permafrost thaw can potentially generate substantial feedbacks to Arctic ecosystems and climate. This study describes the first comprehensive spatial examination of active layer biogeochemistry that extends across high- and low-centered polygons and their features, including depth. Water chemistry measurements were made on active layer water samples collected near Barrow, Alaska during summer, 2012. Several significant differences in chemistry were observed between high- and low-centered polygons suggesting polygon types may be useful for landscape-scale geochemical classification. However, differences were found for polygon features (centers and troughs) for analytes that were not significant for type, suggesting that finer scale features control biogeochemistry in a different way than polygon type. Depth variations were also significant, demonstrating important multi-dimensional aspects of polygonal ground biogeochemistry. These results have major implications for understanding how polygonal ground ecosystems function, and how they may respond to future change. This data package includes one *.csv data file and one *.pdf user guide. The Next-Generation Ecosystem Experiments: Arctic (NGEE Arctic), was a research effort to reduce uncertainty in Earth System Models by developing a predictive understanding of carbon-rich Arctic ecosystems and feedbacks to climate. NGEE Arctic was supported by the Department of Energy's Office of Biological and Environmental Research. The NGEE Arctic project had two field research sites: 1) located within the Arctic polygonal tundra coastal region on the Barrow Environmental Observatory (BEO) and the North Slope near Utqiagvik (Barrow), Alaska and 2) multiple areas on the discontinuous permafrost region of the Seward Peninsula north of Nome, Alaska. Through observations, experiments, and synthesis with existing datasets, NGEE Arctic provided an enhanced knowledge base for multi-scale modeling and contributed to improved process representation at global pan-Arctic scales within the Department of Energy's Earth system Model (the Energy Exascale Earth System Model, or E3SM), and specifically within the E3SM Land Model component (ELM).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

02-16 Digital Engineering

48% of large projects finish on budget 8.5% of large projects finish on budget and on schedule 0.5% finish on budget and schedule, while delivering the expected benefits/promises Nuclear related infrastructure is one of the worst offenders

22 GENERAL STUDIES OF NUCLEAR REACTORS↗